Vi använder cookies för att ge dig en bättre upplevelse av vår webbplats. Du kan välja att endast tillåta nödvändiga cookies eller tillåta alla cookies.
Pris: 145kr
Köp
Grip glue
Perfect hold for your grips. Contents: 20 g.
- Approvals: HOMNN_EU
- Volume: 20 g
Pris: 100kr
Köp
Repair kit
The repair kit is a two-component epoxy resin adhesive. Hardens at room temperature: accelerated hardening possible by raising the temperature.
Use: Particularly suitable for steel, but also other metals, wood, concrete, ceramics, glass and most plastics. The steel bond is resistant to, among other things, oil, gasoline, diesel and battery acid.
Processing: Best results are achieved with clean and rough surfaces. Cut off the required amount and knead for approx. 1 minute until a uniform color is achieved. Use within 2 minutes.
At first, it seems as if there is no adhesion. Just carry on and press the adhesive mixture into the surface. Remove any excess material. When coating or repairing surfaces that are still wet, leak or are under water, apply pressure until adhesion begins. Smooth flat with water by hand for an even surface. Wash your hands with soap and water (or with a Turbo cleaning towelette) immediately after completing your work. Hardening commences after 5 to 10 minutes. The repaired part can be used again after as little as 60 minutes. The surfaces to be glued must be dry and free from dust and grease. Contents: 56 g.
Use: Particularly suitable for steel, but also other metals, wood, concrete, ceramics, glass and most plastics. The steel bond is resistant to, among other things, oil, gasoline, diesel and battery acid.
Processing: Best results are achieved with clean and rough surfaces. Cut off the required amount and knead for approx. 1 minute until a uniform color is achieved. Use within 2 minutes.
At first, it seems as if there is no adhesion. Just carry on and press the adhesive mixture into the surface. Remove any excess material. When coating or repairing surfaces that are still wet, leak or are under water, apply pressure until adhesion begins. Smooth flat with water by hand for an even surface. Wash your hands with soap and water (or with a Turbo cleaning towelette) immediately after completing your work. Hardening commences after 5 to 10 minutes. The repaired part can be used again after as little as 60 minutes. The surfaces to be glued must be dry and free from dust and grease. Contents: 56 g.
- Approvals: HOMNN_EU
- Volume: 56 g
Visa hela beskrivningen
Pris: 310kr
Köp
Thread lock
Medium strength thread lock - contents, 50 ml.
- Temperature resistant from -55 to +200 °C
- Fills gaps up to 0.25 mm
- Final strength achieved after 1 to 3 hours
- Approvals: HOMNN_EU
- Volume: 50 ml
Visa hela beskrivningen
Pris: 159kr
Köp
Thread lock
Medium-strength thread lock. Suitable for all metal thread connections.
- Approvals: HOMNN_EU
Pris: 280kr
Köp
Grip set
- Combines the durability of the KTM standard grips with the comfort of the soft KTM grips
- Harder orange material on the inside and on the grip ends for long durability
- Softer black material on the outside for increased comfort
- Approvals: HOMNN_EU
- Colour: Black
- Note: Closed end
Visa hela beskrivningen
Pris: 280kr
Köp
Grip set
- Combines the durability of the KTM standard grips with the comfort of the soft KTM grips
- Harder orange material on the inside and on the grip ends for long durability
- Softer black material on the outside for increased comfort
- Approvals: HOMNN_EU
- Colour: Black
- Note: Open end
Visa hela beskrivningen
