• Orange with KTM logo
• 50 mm wide & 99 m long

ORGANIC BRAKE PADS

• Made from a special material mix with a high proportion of organic substances, therefore softer
• With ceramic underlayer for optimum thermal insulation
• Lower friction coefficient than sintered brake pads, so less aggressive braking feel
• Beneficial when particularly refined responsiveness is desired for ideal brake application

• 100% sintered metals
• Very high coefficient of friction for maximum and enduring braking power
• Low "fading" tendency when hot
• Very effective braking in the wet as well
• Very hard and therefore extremely long-lasting
• Particularly beneficial in extreme conditions (e.g. sand, gravel, etc.)

ORGANIC BRAKE PADS

• Made from a special material mix with a high proportion of organic substances, therefore softer
• With ceramic underlayer for optimum thermal insulation
• Lower friction coefficient than sintered brake pads, so less aggressive braking feel
• Beneficial when particularly refined responsiveness is desired for ideal brake application

The closed, two-component plastic handguards developed by KTM feature a black center section that offers maximum strength for optimum protection. The colorful upper and lower parts are highly flexible and endure even the roughest of treatment without complaint. Available in two different heights.

• Enables secure attachment to the machine without scratching your handlebars or tank
• Made from durable ballistic nylon
• Load capacity of 280 kg
• Dimensions: 3,8 cm x 0,6 m
• 2 units

• Enables secure attachment to the machine without scratching your handlebars or tank
• Made from durable ballistic nylon
• Load capacity of 280 kg
• With handlebar loops
• With rubberized hooks on both belt ends
• 2 units

DO YOU KNOW that all KTM CNC parts are manufactured from highest quality aluminum and therefore not only look good, they also withstand the toughest treatment? With the anodized aluminum components in the original factory look from the PowerParts range, you can turn your KTM into something very special.

• Spring-mounted, 20° rotational movement possible towards front and rear
• More control and grip in the corners thanks to the maneuverability
• Large tread surface area of 60 mm
• Simpler and quicker weight shifting
• Simpler gear changing and braking
• Permanent contact between boot and foot pegs: extends the service life of your boots!

• Manufactured from high-strength 7075-T6 aluminum, the strongest aluminum in the world
• Free from vibration - therefore the highest power transmission efficiency
• No small stones or dirt particles can become stuck under the chain thanks to angled recesses between the teeth
• Orange anodized with a permanent, organic and environmentally friendly pigment

• Made from polyester, with special rubberized back
• Gas and oil resistant
• In special KTM design
• Size: 100 x 170 cm

• Ratchet (with locking device), lever, two extensions and socket wrench
• Hexagon sockets from 4 to 14
• Allen keys from 3 to 8
• Phillips, slotted and Torx bits

• Ratchet (with locking device), lever, two extensions and socket wrench
• Hexagon sockets from 6 to 24
• Allen keys from 3 to 10
• Phillips and slotted bits
• Torx bits from 15 to 55

• Diameter 310 mm
• Floating brake disc manufactured from special high-grade stainless steel
• Internal ring made from high-grade aluminum
• Larger diameter for added braking performance
• Minimal wear on brake linings
• Can only be used in conjunction with the 4-piston brake caliper 58413015644/04 or 6-piston brake caliper 59413015044/04

• The Z-ring or X-ring has 4 contact points in contrast to 2 contact points with the O-ring version
• This means higher flexibility and better running characteristics for the Z-ring or X-ring chain
• The spring effect of the Z-ring or X-ring guarantees consistent and permanent lubrication
• This means a significantly longer service life for the Z-ring or X-ring chain
• The Z-ring or X-ring provides a better seal against penetration by water and dirt

• Floating brake disc manufactured from special high-grade stainless steel
• Internal ring made from high-grade aluminum
• With Wave design for added braking performance
• Minimal wear on brake pads
• Can only be used in conjunction with 4 piston brake caliper 5841301564404 or 6 piston brake caliper 5941301504404
• In combination with 4 piston brake caliper 58413015644/04 no speedometer signal will be sent

• 100% sintered metals
• Very high coefficient of friction for maximum and enduring braking power
• Low "fading" tendency when hot
• Very effective braking in the wet as well
• Very hard and therefore extremely long-lasting
• Particularly beneficial in extreme conditions (e.g. sand, gravel, etc.)

ORGANIC BRAKE PADS

• Made from a special material mix with a high proportion of organic substances, therefore softer
• With ceramic underlayer for optimum thermal insulation
• Lower friction coefficient than sintered brake pads, so less aggressive braking feel
• Beneficial when particularly refined responsiveness is desired for ideal brake application

• Made from a special material mix with a high proportion of organic substances, therefore softer
• With ceramic underlayer for optimum thermal insulation
• Lower friction coefficient than sintered brake pads, so less aggressive braking feel
• Beneficial when particularly refined responsiveness is desired for ideal brake application

• 100% sintered metals
• Very high coefficient of friction for maximum and enduring braking power
• Low "fading" tendency when hot
• Very effective braking in the wet as well
• Very hard and therefore extremely long-lasting
• Particularly beneficial in extreme conditions (e.g. sand, gravel, etc.)

• The Z-ring or X-ring has 4 contact points in contrast to 2 contact points with the O-ring version
• This means higher flexibility and better running characteristics for the Z-ring or X-ring chain
• The spring effect of the Z-ring or X-ring guarantees consistent and permanent lubrication
• This means a significantly longer service life for the Z-ring or X-ring chain
• The Z-ring or X-ring provides a better seal against penetration by water and dirt

Ingenious: Foot pegs that move with you when you shift your weight. Ideal for Motocross, Enduro and Supermoto.

The benefits:

• Spring-mounted, 20-degree rotational movement possible towards front and rear
• More control and grip in the corners thanks to the maneuverability
• Large tread surface of 60 mm
• Simpler and quicker weight shifting
• Simpler gear changing and braking
• Permanent contact between boot and foot peg: extends the service life of your boots!

• Ergonomic; contour matched to the shape of the hand for maximum comfort
• Small "half waffle" ribs on the rear for secure grip
• Made from two materials with different grades of hardness
• Three areas for the metal safety wire
• Grip hardness: medium

• Ergonomic; contour matched to the shape of the hand for maximum comfort
• Small "half waffle" ribs on the rear for secure grip
• Made from two materials with different grades of hardness
• Three areas for the metal safety wire
• Grip hardness: soft

• Harder orange material on the inside and at the grip ends for a long service life
• Softer black material on the outside, where the hand lies on the grip, for increased comfort
• With open grip ends for closed handguards or bar ends

• Harder orange material on the inside and at the grip ends for a long service life
• Softer black material on the outside, where the hand lies on the grip, for increased comfort

This handguard set is not just visually impressive. Thanks to the special mix of materials, the handguard protects your hands and controls from damage without immediately breaking up. They also give you outstanding weather protection.

This handguard set is not just visually impressive. Thanks to the special mix of materials, the handguard protects your hands and controls from damage without immediately breaking up. They also give you outstanding weather protection.

This handguard set is not just visually impressive. Thanks to the special mix of materials, the handguard protects your hands and controls from damage without immediately breaking up. They also give you outstanding weather protection.

• 78002079100EB is mounted standard on the 790 Adventure R
  

• Black mid-section = maximum strength for optimum protection
• Orange top and bottom parts = highly flexible, enduring even the roughest of treatment

• Manufactured from high-strength aluminum, forged and then CNC-machined
• This extensive production process guarantees a long service life, maximum flexibility and a precise fit
• Ergonomically perfected shape (the result of years of racing experience)
• Predefined breaking point
• Orange anodized

Medium-strength thread lock. Suitable for all metal thread connections.

Medium strength thread lock - contents, 50 ml.

• Temperature resistant from -55 to +200 °C 
• Fills gaps up to 0.25 mm
• Final strength achieved after 1 to 3 hours
  

• Waterproof resistant coating
• Waterproof roll closure

• Suitable for all KTM GPS holders
• Size: 170 x 130 x 35 mm

Only for use on original handlebar mounting.

• Universal and discreet mounting solution for your smartphone
• Counterpart for the smartphone cases.
• The smartphone can be easily mounted on the motorcycle by turning it 90°.
• Can be clamped on the handlebar (including different adaptor)
• The arm can be rotated in any position for the perfect position for your smartphone.

• Protects your expensive smartphone and still keeping a slim design
• Integrated counterpart for the smartphone bracket
• The smartphone can be easily mounted on the motorcycle by turning it 90°

• Unobtrusive protection for your expensive smartphone
• Integrated counterpart for the smartphone bracket
• The smartphone can easily be mounted on the bracket by turning it 90°.

• Unobtrusive protection for your expensive smartphone
• Integrated counterpart for the smartphone bracket
• The smartphone can easily be mounted on the bracket by turning it 90°.

• Unobtrusive protection for your expensive smartphone
• Integrated counterpart for the smartphone bracket
• The smartphone can easily be mounted on the bracket by turning it 90°.

• Protects your expensive smartphone and still keeping a slim design
• Integrated counterpart for the smartphone bracket
• The smartphone can be easily mounted on the motorcycle by turning it 90°

• Protects your expensive smartphone and still keeping a slim design
• Integrated counterpart for the smartphone bracket
• The smartphone can be easily mounted on the motorcycle by turning it 90°

• Unobtrusive protection for your expensive smartphone
• Integrated counterpart for the smartphone bracket
• The smartphone can easily be mounted on the bracket by turning it 90°.

• Unobtrusive protection for your expensive smartphone
• Integrated counterpart for the smartphone bracket
• The smartphone can easily be mounted on the bracket by turning it 90°.

• Can be stuck on any flat surface (rear side of smartphone, or smartphone case)
• Integrated counterpart for the smartphone bracket
• The smartphone can be easily mounted on the motorcycle by turning it 90°
• Dimensions: 66x55mm (2.6x2.17 inch)

• Easy handling and operation
• More safety
• Less wear on the cord
• Made of high quality material
• Cable not included

• Contents are in accordance with DIN standard 13167-2014 for motorcyclists
• Waterproof packaging
• With its slim shape and Velcro straps at the back, the first aid kit is easy to store

Note:

It is mandatory to carry a first aid kit in many countries (such as Austria, Italy, Portugal and Spain).

The optimum solution for always having the most important tools to hand when on the road.

• Ratchet (with locking device), lever, two extensions and socket wrench
• Hexagon sockets from 6 to 24
• Allen keys from 3 to 10
• Phillips and slotted bits
• Torx bits from 15 to 55

• Ratchet (with locking device), lever, two extensions and socket wrench
• Hexagon sockets from 4 to 14
• Allen keys from 3 to 8
• Phillips, slotted and Torx bits

• Push-on spoke wrenches in sizes 5.65 and 6.95 mm
• Push-on ratchet ¼"
• Ratchet attachments: 6, 8, 10 mm socket wrench, 15 Torx

• Enables secure attachment to the machine without scratching your handlebars or tank
• With rubberized hooks and handlebar loops on belt ends
• 2 units

• Enables secure attachment to the machine without scratching your handlebars or tank
• Made from durable ballistic nylon
• Load capacity of 280 kg
• With handlebar loops
• With rubberized hooks on both belt ends

• Enables secure fastening to the machine without scratching your handlebars or tank
• Made from durable ballistic nylon
• Load capacity of 280 kg
• With handlebar loops
• With a rubberized hook and a carabiner on the belt ends
• 2 units

• Made from polyester, with special rubberized back
• Gas and oil resistant
• In special KTM design
• Size: 100 x 170 cm

• 10 pcs. cleanig towels, packed separately
• towel size 285 x 200 mm
• 70% Isopropanol
• ideal for cleaning of surfaces before application of stickers

• Extra thick film
• Protects the outer tubes against stone impact

• For wheel size 18/21"; 19/21"
• Pre-cut sticker
• Suitable for front and rear rim

• For wheel size 18/21"; 19/21"
• Pre-cut sticker
• Suitable for front and rear rim

The oil filter kit contains all the filters, sieves, O-rings and seals you need for an oil change.

HeliCoil plus

Spark plug thread repair selection M10x1 / M12x1.25 / M14x1.25.