• Ratchet (with locking device), lever, two extensions and socket wrench
• Hexagon sockets from 4 to 14
• Allen keys from 3 to 8
• Phillips, slotted and Torx bits

• Floating brake disc manufactured from special high-grade stainless steel
• Internal ring made from high-grade aluminum
• With Wave design for added braking performance
• Minimal wear on brake pads
• Can only be used in conjunction with 4 piston brake caliper 5841301564404 or 6 piston brake caliper 5941301504404
• In combination with 4 piston brake caliper 58413015644/04 no speedometer signal will be sent

• Ergonomic; contour matched to the shape of the hand for maximum comfort
• Small "half waffle" ribs on the rear for secure grip
• Made from two materials with different grades of hardness
• Three areas for the metal safety wire
• Grip hardness: medium

• Ergonomic; contour matched to the shape of the hand for maximum comfort
• Small "half waffle" ribs on the rear for secure grip
• Made from two materials with different grades of hardness
• Three areas for the metal safety wire
• Grip hardness: soft

• All KTM handlebars are made from EN AW 7010 T6 aluminum
• 28.5 mm diameter in the clamping area
• 22.15 mm diameter in the lever area
• Position markings for simple setting
• Dimensions: A = 115 mm, B = 806 mm, C = 62 mm

Dimensions: A = 118 mm, B = 811 mm, C = 74 mm

• Handlebar pad and smartphone sleeve in one
• Touch screen remains fully functional!
• Smartphone sleeve held in place by loop and hook strips
• Smartphone can easily taken off with the sleeve
• For Smartphones up to 160 x 80mm
• Comes with two separate protective strips in case the sleeve is not used
• Smartphone not included!
  

Medium-strength thread lock. Suitable for all metal thread connections.

Medium strength thread lock - contents, 50 ml.

• Temperature resistant from -55 to +200 °C 
• Fills gaps up to 0.25 mm
• Final strength achieved after 1 to 3 hours
  

• Waterproof resistant coating
• Waterproof roll closure

• Universal and discreet mounting solution for your smartphone
• Counterpart for the smartphone cases.
• The smartphone can be easily mounted on the motorcycle by turning it 90°.
• Can be clamped on the handlebar (including different adaptor)
• The arm can be rotated in any position for the perfect position for your smartphone.

• Easy handling and operation
• More safety
• Less wear on the cord
• Made of high quality material
• Cable not included

• 100 mm length
• 20 blades: 0,05 - 0,1 - 0,15 - 0,2 - 0,25 - 0,3- 0,35 - 0,4 - 0,45 - 0,5 - 0,55 - 0,6 - 0,65 - 0,7 - 0,75 - 0,8 - 0,85 - 0,9 - 0,95 - 1,0 mm

• Contents are in accordance with DIN standard 13167-2014 for motorcyclists
• Waterproof packaging
• With its slim shape and Velcro straps at the back, the first aid kit is easy to store

Note:

It is mandatory to carry a first aid kit in many countries (such as Austria, Italy, Portugal and Spain).

The optimum solution for always having the most important tools to hand when on the road.

• Ratchet (with locking device), lever, two extensions and socket wrench
• Hexagon sockets from 6 to 24
• Allen keys from 3 to 10
• Phillips and slotted bits
• Torx bits from 15 to 55

• Ratchet (with locking device), lever, two extensions and socket wrench
• Hexagon sockets from 4 to 14
• Allen keys from 3 to 8
• Phillips, slotted and Torx bits

• Push-on spoke wrenches in sizes 5.65 and 6.95 mm
• Push-on ratchet ¼"
• Ratchet attachments: 6, 8, 10 mm socket wrench, 15 Torx

• Stabilizes your motorcycle during transportation
• Protects the fork shaft seal rings and fork springs from damage due to overly strong tightening down with lashing straps while transportation
• Gets clamped in between the tyre and the bottom of the front wheel fender

• Enables secure attachment to the machine without scratching your handlebars or tank
• With rubberized hooks and handlebar loops on belt ends
• 2 units

• Enables secure attachment to the machine without scratching your handlebars or tank
• Made from durable ballistic nylon
• Load capacity of 280 kg
• With handlebar loops
• With rubberized hooks on both belt ends

• Enables secure fastening to the machine without scratching your handlebars or tank
• Made from durable ballistic nylon
• Load capacity of 280 kg
• With handlebar loops
• With a rubberized hook and a carabiner on the belt ends
• 2 units

• Made from polyester, with special rubberized back
• Gas and oil resistant
• In special KTM design
• Size: 100 x 170 cm

• 10 pcs. cleanig towels, packed separately
• towel size 285 x 200 mm
• 70% Isopropanol
• ideal for cleaning of surfaces before application of stickers

• Anodized D.I.D DirtStar rim - an ideal compromise between rigidity and flexibility
• Anodized from the full milled hub - specially developed and coordinated to the properties of the D.I.D DirtStar rim
• Maximum weight saving compared to standard wheels
• Maximum gain in handling and, at the same time, stability in challenging offroad application
• 36 spoke design
• Anodized spoke nipple made from aluminum
• Wheel size 1.6 x 21"
• For axle diameter 22 mm

• Anodized D.I.D DirtStar rim - an ideal compromise between rigidity and flexibility
• Anodized from the full milled hub - specially developed and coordinated to the properties of the D.I.D DirtStar rim
• Maximum weight saving compared to standard wheels
• Maximum gain in handling and, at the same time, stability in challenging offroad application
• 36 spoke design
• Anodized spoke nipple made from aluminum
• Wheel size 2.15 x 18"
• For axle diameter 20 mm

• Anodized D.I.D DirtStar rim - an ideal compromise between rigidity and flexibility
• Anodized from the full milled hub - specially developed and coordinated to the properties of the D.I.D DirtStar rim
• Maximum weight saving compared to standard wheels
• Maximum gain in handling and, at the same time, stability in challenging offroad application
• 36 spoke design
• Anodized spoke nipple made from aluminum
• Wheel size 2.15 x 19"
• For axle diameter 25 mm

HeliCoil plus

Spark plug thread repair selection M10x1 / M12x1.25 / M14x1.25.