47032010010
Pris: 1785kr 1517kr
Köp
Clutch kit
The clutch kit contains everything you need to repair your clutch.
The clutch kit contains everything you need to repair your clutch.<p></p> dölj mer info
00062030051
Pris: 125kr 106kr
Köp
Grip glue
Perfect hold for your grips. Contents: 20 g.
- Approvals: HOMNN_EU
- Volume: 20 g
Perfect hold for your grips. Contents: 20 g. <p></p> dölj mer info
00062030058
Lagerstatus: 2021-12-01
Pris: 90kr 77kr
Köp
Repair kit
The repair kit is a two-component epoxy resin adhesive. Hardens at room temperature: accelerated hardening possible by raising the temperature.
Use: Particularly suitable for steel, but also other metals, wood, concrete, ceramics, glass and most plastics. The steel bond is resistant to, among other things, oil, gasoline, diesel and battery acid.
Processing: Best results are achieved with clean and rough surfaces. Cut off the required amount and knead for approx. 1 minute until a uniform color is achieved. Use within 2 minutes.
At first, it seems as if there is no adhesion. Just carry on and press the adhesive mixture into the surface. Remove any excess material. When coating or repairing surfaces that are still wet, leak or are under water, apply pressure until adhesion begins. Smooth flat with water by hand for an even surface. Wash your hands with soap and water (or with a Turbo cleaning towelette) immediately after completing your work. Hardening commences after 5 to 10 minutes. The repaired part can be used again after as little as 60 minutes. The surfaces to be glued must be dry and free from dust and grease. Contents: 56 g.
Use: Particularly suitable for steel, but also other metals, wood, concrete, ceramics, glass and most plastics. The steel bond is resistant to, among other things, oil, gasoline, diesel and battery acid.
Processing: Best results are achieved with clean and rough surfaces. Cut off the required amount and knead for approx. 1 minute until a uniform color is achieved. Use within 2 minutes.
At first, it seems as if there is no adhesion. Just carry on and press the adhesive mixture into the surface. Remove any excess material. When coating or repairing surfaces that are still wet, leak or are under water, apply pressure until adhesion begins. Smooth flat with water by hand for an even surface. Wash your hands with soap and water (or with a Turbo cleaning towelette) immediately after completing your work. Hardening commences after 5 to 10 minutes. The repaired part can be used again after as little as 60 minutes. The surfaces to be glued must be dry and free from dust and grease. Contents: 56 g.
- Approvals: HOMNN_EU
- Volume: 56 g
The repair kit is a two-component epoxy resin adhesive. Hardens at room temperature: accelerated hardening possible by raising the temperature. <br />Use: Particularly suitable for steel, but also other metals, wood, concrete, ceramics, glass and most plastics. The steel bond is resistant to, among other things, oil, gasoline, diesel and battery acid. <br />Processing: Best results are achieved with clean and rough surfaces. Cut off the required amount and knead for approx. 1 minute until a uniform color is achieved. Use within 2 minutes.<br />At first, it seems as if there is no adhesion. Just carry on and press the adhesive mixture into the surface. Remove any excess material. When coating or repairing surfaces that are still wet, leak or are under water, apply pressure until adhesion begins. Smooth flat with water by hand for an even surface. Wash your hands with soap and water (or with a Turbo cleaning towelette) immediately after completing your work. Hardening commences after 5 to 10 minutes. The repaired part can be used again after as little as 60 minutes. The surfaces to be glued must be dry and free from dust and grease. Contents: 56 g.<p></p> dölj mer info
38-2920
Pris: 125kr 106kr
Köp
Thread lock
Medium-strength thread lock. Suitable for all metal thread connections.
- Approvals: HOMNN_EU
<p> Medium-strength thread lock. Suitable for all metal thread connections.<br /></p><p></p> dölj mer info
00062030050
Lagerstatus: 2021-12-01
Pris: 385kr 327kr
Köp
Thread lock
Medium strength thread lock - contents, 50 ml.
- Temperature resistant from -55 to +200 °C
- Fills gaps up to 0.25 mm
- Final strength achieved after 1 to 3 hours
- Approvals: HOMNN_EU
- Volume: 50 ml
<p>Medium strength thread lock - contents, 50 ml.</p><ul><li>Temperature resistant from -55 to +200 °C </li><li>Fills gaps up to 0.25 mm</li><li>Final strength achieved after 1 to 3 hours<br /></li></ul><p></p> dölj mer info
47130097000
Pris: 240kr 204kr
Köp
Cylinder seal set
The seal set contains all the seals you need to repair your cylinder.
<p>The seal set contains all the seals you need to repair your cylinder.</p><p></p> dölj mer info
00050002002
Lagerstatus: 2021-12-01
Pris: 1115kr 948kr
Köp
Drivetrain kit 14/46
This drive kit consists of a 14 tooth front and a 46 tooth rear sprocket wheel, a Regina chain and master link.
- Colour: Silver
- Number Of Teeth: 14/46
<p>This drive kit consists of a 14 tooth front and a 46 tooth rear sprocket wheel, a Regina chain and master link.</p><p></p> dölj mer info
00050002003
Pris: 1115kr 948kr
Köp
Drivetrain kit 14/49
This drive kit consists of a 14 tooth front and a 49 tooth rear sprocket wheel, a Regina chain and master link.
- Colour: Silver
- Number Of Teeth: 14/49
This drive kit consists of a 14 tooth front and a 49 tooth rear sprocket wheel, a Regina chain and master link.<p></p> dölj mer info
00050000812
Lagerstatus: 2021-12-01
Pris: 605kr 514kr
Köp
Exhaust parts kit
The exhaust parts kit contains everything you need to repair your exhaust system.
The exhaust parts kit contains everything you need to repair your exhaust system.<p></p> dölj mer info
63002021100
Pris: 265kr 225kr
Köp
Grip set
- Combines the durability of the KTM standard grips with the comfort of the soft KTM grips
- Harder orange material on the inside and on the grip ends for long durability
- Softer black material on the outside for increased comfort
- Approvals: HOMNN_EU
- Colour: Black
- Note: Closed end
<ul><li>Combines the durability of the KTM standard grips with the comfort of the soft KTM grips</li><li>Harder orange material on the inside and on the grip ends for long durability</li><li>Softer black material on the outside for increased comfort</li></ul><p></p> dölj mer info
Användarmanual
50329080100
Pris: 140kr 119kr
Köp
Multi-purpose fork wrench
KTM multi-purpose fork wrench AF-"17/21/27/32" - chrome vanadium in KTM blister pack.
KTM multi-purpose fork wrench AF-"17/21/27/32" - chrome vanadium in KTM blister pack.<p></p> dölj mer info
00062030090
Lagerstatus: 2021-12-01
Pris: 4995kr 4246kr
Köp
Thread repair toolkit spark plugs
HeliCoil plus
Spark plug thread repair selection M10x1 / M12x1.25 / M14x1.25.
<p> HeliCoil plus</p><p> Spark plug thread repair selection M10x1 / M12x1.25 / M14x1.25.</p><p></p> dölj mer info
00050000204
Lagerstatus: Obekräftad
Pris: 1525kr 1296kr
Köp
Piston kit size I
This piston kit includes the piston and all the seals required to change the piston.
This piston kit includes the piston and all the seals required to change the piston. <p></p> dölj mer info
00050000205
Pris: 1525kr 1296kr
Köp
Piston kit size II
This piston kit includes the piston and all the seals required to change the piston.
This piston kit includes the piston and all the seals required to change the piston. <p></p> dölj mer info
77206015000
Pris: 220kr 187kr
Köp
Air filter
Air filter - single orderable
Air filter - single orderable dölj mer info
77206015000A
Pris: 220kr 187kr
Köp
Pre-oiled air filter
Individual pre-oiled air filter
<p>Individual pre-oiled air filter <br /></p><p></p> dölj mer info
T612S
Lagerstatus: 2021-12-21
Pris: 580kr 493kr
Köp
Clamping stand
Tool for clamping components (outer tube, fork leg)
- Type: Repair
- Technical Details: Diameter: 40 mm (1.57 in)
Tool for clamping components (outer tube, fork leg)<p></p> dölj mer info
T107S
Pris: 270kr 230kr
Köp
Depth micrometer
Tool for determining distances
- Type: Repair
Tool for determining distances<p></p> dölj mer info
T170S1
Lagerstatus: 2021-12-21
Pris: 3895kr 3311kr
Köp
Filling tool
Tool for filling the damper with nitrogen
- Type: Repair
Tool for filling the damper with nitrogen<p></p> dölj mer info
REKOMMENDERADE PRODUKTER
Filling adapter
T1565
Filling adapter
T1296
RESERVDELAR
Dirt scraper 12,7X18X3-4,5
36120060
T1204
Lagerstatus: 2021-12-21
Pris: 190kr 162kr
Köp
Mounting sleeve
Tool for mounting and pressing out components (dirt scraper, DU bush)
- Type: Repair
- Technical Details: Diameter: 25.5 … 30.5 mm (1.004 … 1.201 in)
Tool for mounting and pressing out components (dirt scraper, DU bush)<p></p> dölj mer info
T1206
Lagerstatus: 2021-12-01
Pris: 210kr 179kr
Köp
Pressing tool
Tool for pressing in components (heim joint)
- Type: Repair
- Technical Details: Diameter: 15 … 30 mm (0.59 … 1.18 in)
Tool for pressing in components (heim joint)<p></p> dölj mer info
T1207S
Lagerstatus: 2022-02-07
Pris: 255kr 217kr
Köp
Pressing tool
Tool for pressing in components (heim joint)
- Type: Repair
Tool for pressing in components (heim joint)<p></p> dölj mer info
95010031S
Lagerstatus: 2021-12-01
Pris: 1165kr 990kr
Köp
Fork spring set
WP fork springs are high-performance springs and can be used to replace your original spring or to fine-tune your fork to your own weight and height.
WP fork springs are high-performance springs and can be used to replace your original spring or to fine-tune your fork to your own weight and height.<p></p> dölj mer info
70009015000
Lagerstatus: 2022-01-28
Pris: 735kr 625kr
Köp
Front wheel repair kit
The repair kit contains everything you need to repair the bearing support in your wheel.
The repair kit contains everything you need to repair the bearing support in your wheel.<p></p> dölj mer info
