350 SX-F (2017) POWERPARTS & ACCESSORIES
-16%

79232010010

Lagerstatus: 2021-12-01
Pris: 2195kr 1866kr
Köp
Clutch kit
The clutch kit contains everything you need to repair your clutch.

The clutch kit contains everything you need to repair your clutch. <p></p> dölj mer info
-16%

00062030051

Lagerstatus:
Pris: 125kr 106kr
Köp
Grip glue
Perfect hold for your grips. Contents: 20 g.

  • Approvals: HOMNN_EU
  • Volume: 20 g
Perfect hold for your grips. Contents: 20 g. <p></p> dölj mer info
-16%

00062030058

Lagerstatus: 2021-12-01
Pris: 90kr 77kr
Köp
Repair kit
The repair kit is a two-component epoxy resin adhesive. Hardens at room temperature: accelerated hardening possible by raising the temperature.
Use: Particularly suitable for steel, but also other metals, wood, concrete, ceramics, glass and most plastics. The steel bond is resistant to, among other things, oil, gasoline, diesel and battery acid.
Processing: Best results are achieved with clean and rough surfaces. Cut off the required amount and knead for approx. 1 minute until a uniform color is achieved. Use within 2 minutes.
At first, it seems as if there is no adhesion. Just carry on and press the adhesive mixture into the surface. Remove any excess material. When coating or repairing surfaces that are still wet, leak or are under water, apply pressure until adhesion begins. Smooth flat with water by hand for an even surface. Wash your hands with soap and water (or with a Turbo cleaning towelette) immediately after completing your work. Hardening commences after 5 to 10 minutes. The repaired part can be used again after as little as 60 minutes. The surfaces to be glued must be dry and free from dust and grease. Contents: 56 g.

  • Approvals: HOMNN_EU
  • Volume: 56 g
The repair kit is a two-component epoxy resin adhesive. Hardens at room temperature: accelerated hardening possible by raising the temperature. <br />Use: Particularly suitable for steel, but also other metals, wood, concrete, ceramics, glass and most plastics. The steel bond is resistant to, among other things, oil, gasoline, diesel and battery acid. <br />Processing: Best results are achieved with clean and rough surfaces. Cut off the required amount and knead for approx. 1 minute until a uniform color is achieved. Use within 2 minutes.<br />At first, it seems as if there is no adhesion. Just carry on and press the adhesive mixture into the surface. Remove any excess material. When coating or repairing surfaces that are still wet, leak or are under water, apply pressure until adhesion begins. Smooth flat with water by hand for an even surface. Wash your hands with soap and water (or with a Turbo cleaning towelette) immediately after completing your work. Hardening commences after 5 to 10 minutes. The repaired part can be used again after as little as 60 minutes. The surfaces to be glued must be dry and free from dust and grease. Contents: 56 g.<p></p> dölj mer info
-16%

38-2920

Lagerstatus:
Pris: 125kr 106kr
Köp
Thread lock

Medium-strength thread lock. Suitable for all metal thread connections.

  • Approvals: HOMNN_EU
<p> Medium-strength thread lock. Suitable for all metal thread connections.<br /></p><p></p> dölj mer info
-16%

00062030050

Lagerstatus: 2021-12-01
Pris: 385kr 327kr
Köp
Thread lock

Medium strength thread lock - contents, 50 ml.

  • Temperature resistant from -55 to +200 °C 
  • Fills gaps up to 0.25 mm
  • Final strength achieved after 1 to 3 hours

  • Approvals: HOMNN_EU
  • Volume: 50 ml
<p>Medium strength thread lock - contents, 50 ml.</p><ul><li>Temperature resistant from -55 to +200 °C </li><li>Fills gaps up to 0.25 mm</li><li>Final strength achieved after 1 to 3 hours<br /></li></ul><p></p> dölj mer info
-16%

79230097100

Lagerstatus: 2021-12-01
Pris: 765kr 650kr
Köp
Cylinder seal set

The seal set contains all the seals you need to repair your cylinder.

<p>The seal set contains all the seals you need to repair your cylinder.</p><p></p> dölj mer info
-16%

00050002077

Lagerstatus: Obekräftad
Pris: 1375kr 1169kr
Köp
Drivetrain kit 14/50

The drivetrain kit consists of the front (14 tooth) and the rear sprocket (50 tooth), as well as a Regina chain.

  • Number Of Teeth: 14/50
<p>The drivetrain kit consists of the front (14 tooth) and the rear sprocket (50 tooth), as well as a Regina chain.</p><p></p> dölj mer info
-16%

63002021100

Lagerstatus:
Pris: 265kr 225kr
Köp
Grip set
  • Combines the durability of the KTM standard grips with the comfort of the soft KTM grips
  • Harder orange material on the inside and on the grip ends for long durability
  • Softer black material on the outside for increased comfort

  • Approvals: HOMNN_EU
  • Colour: Black
  • Note: Closed end
<ul><li>Combines the durability of the KTM standard grips with the comfort of the soft KTM grips</li><li>Harder orange material on the inside and on the grip ends for long durability</li><li>Softer black material on the outside for increased comfort</li></ul><p></p> dölj mer info
-16%

63002021200

Lagerstatus:
Pris: 265kr 225kr
Köp
Grip set
  • Combines the durability of the KTM standard grips with the comfort of the soft KTM grips
  • Harder orange material on the inside and on the grip ends for long durability
  • Softer black material on the outside for increased comfort

  • Approvals: HOMNN_EU
  • Colour: Black
  • Note: Open end
<ul><li>Combines the durability of the KTM standard grips with the comfort of the soft KTM grips</li><li>Harder orange material on the inside and on the grip ends for long durability</li><li>Softer black material on the outside for increased comfort</li></ul><p></p> dölj mer info
-16%

79002121200

Lagerstatus:
Pris: 285kr 242kr
Köp
Grip set
  • Right grip permanently glued to the throttle grip
  • Left grip with aluminum clamping ring for fixing on the handlebar
  • Inconvenient gluing and securing with wire no longer necessary

  • Approvals: HOMNN_EU
  • Colour: Black
  • Note: Open end
<ul><li>Right grip permanently glued to the throttle grip</li><li>Left grip with aluminum clamping ring for fixing on the handlebar</li><li>Inconvenient gluing and securing with wire no longer necessary</li></ul><p></p> dölj mer info
-16%

00050000083

Lagerstatus:
Pris: 225kr 191kr
Köp
Oil filter kit

The oil filter kit contains all the filters, sieves, O-rings and seals you need for an oil change.

<p>The oil filter kit contains all the filters, sieves, O-rings and seals you need for an oil change.</p><p></p> dölj mer info
-16%

00062030090

Lagerstatus: 2021-12-01
Pris: 4995kr 4246kr
Köp
Thread repair toolkit spark plugs

HeliCoil plus

Spark plug thread repair selection M10x1 / M12x1.25 / M14x1.25.

<p> HeliCoil plus</p><p> Spark plug thread repair selection M10x1 / M12x1.25 / M14x1.25.</p><p></p> dölj mer info
-16%

00050000231

Lagerstatus:
Pris: 2925kr 2486kr
Köp
Piston kit size I
This piston kit includes the piston and all the seals required to change the piston.

This piston kit includes the piston and all the seals required to change the piston. <p></p> dölj mer info
-16%

00050000232

Lagerstatus: Obekräftad
Pris: 2925kr 2486kr
Köp
Piston kit size II
This piston kit includes the piston and all the seals required to change the piston.

This piston kit includes the piston and all the seals required to change the piston. <p></p> dölj mer info
-16%

77708053510

Lagerstatus: Obekräftad
Pris: 2555kr 2172kr
Köp
Plastic parts set
The plastic parts kit contains the two fork protectors and spoilers, the start number plates, the left and right filter box cover, the front and rear fender.

  • Colour: Orange
The plastic parts kit contains the two fork protectors and spoilers, the start number plates, the left and right filter box cover, the front and rear fender.<p></p> dölj mer info
-16%

79006015000

Lagerstatus:
Pris: 220kr 187kr
Köp
Air filter
Air filter - single orderable
Air filter - single orderable dölj mer info
-16%

77036035010

Lagerstatus: Obekräftad
Pris: 3225kr 2741kr
Köp
Shim kit
This shim kit includes all the valve shims you need for setting your valves in a neat box.

This shim kit includes all the valve shims you need for setting your valves in a neat box.<p></p> dölj mer info
-16%

T1205

Lagerstatus: 2021-12-21
Pris: 210kr 179kr
Köp
Calibrating unit
Tool for calibrating components (DU bush)

  • Type: Repair
  • Technical Details: Diameter: 18 mm (0.71 in)
Tool for calibrating components (DU bush)<p></p> dölj mer info
-16%

T1403S

Lagerstatus: 2022-02-07
Pris: 565kr 480kr
Köp
Clamping stand
Tool for clamping components (fork legs, outer fork tube)

  • Type: Repair
  • Technical Details: Diameter: 48 mm (1.89 in)
Tool for clamping components (fork legs, outer fork tube)<p></p> dölj mer info
-16%

T107S

Lagerstatus:
Pris: 270kr 230kr
Köp
Depth micrometer
Tool for determining distances

  • Type: Repair
Tool for determining distances<p></p> dölj mer info
-16%

T170S1

Lagerstatus: 2021-12-21
Pris: 3895kr 3311kr
Köp
Filling tool
Tool for filling the damper with nitrogen

  • Type: Repair
Tool for filling the damper with nitrogen<p></p> dölj mer info
REKOMMENDERADE PRODUKTER
Filling adapter
T1565
Filling adapter
T1296
RESERVDELAR
Dirt scraper 12,7X18X3-4,5
36120060
-16%

T1204

Lagerstatus: 2021-12-21
Pris: 190kr 162kr
Köp
Mounting sleeve
Tool for mounting and pressing out components (dirt scraper, DU bush)

  • Type: Repair
  • Technical Details: Diameter: 25.5 … 30.5 mm (1.004 … 1.201 in)
Tool for mounting and pressing out components (dirt scraper, DU bush)<p></p> dölj mer info
-16%

T150S

Lagerstatus: 2021-12-21
Pris: 375kr 319kr
Köp
Mounting tool
Tool for pressing in components (DU bush in seal ring retainer)

  • Type: Repair
Tool for pressing in components (DU bush in seal ring retainer)<p></p> dölj mer info
-16%

T1206

Lagerstatus: 2021-12-01
Pris: 210kr 179kr
Köp
Pressing tool
Tool for pressing in components (heim joint)

  • Type: Repair
  • Technical Details: Diameter: 15 … 30 mm (0.59 … 1.18 in)
Tool for pressing in components (heim joint)<p></p> dölj mer info
-16%

T1216

Lagerstatus: 2021-12-01
Pris: 240kr 204kr
Köp
Pressing tool
Tool for pressing in components (seal ring retainer of piston rod)

  • Type: Repair
  • Technical Details: Diameter: 38 … 49 mm (1.5 … 1.93 in)
Tool for pressing in components (seal ring retainer of piston rod)<p></p> dölj mer info
-16%

T1207S

Lagerstatus: 2022-02-07
Pris: 255kr 217kr
Köp
Pressing tool
Tool for pressing in components (heim joint)

  • Type: Repair
Tool for pressing in components (heim joint)<p></p> dölj mer info
-16%

79236030010

Lagerstatus: 2021-12-01
Pris: 5595kr 4756kr
Köp
Valve kit
The valve kit contains everything you need to repair your valves.

The valve kit contains everything you need to repair your valves. <p></p> dölj mer info