This drive kit consists of a 17 tooth front and a 42 tooth rear sprocket wheel, a chain and master link.

• Colour: Silver
• Number Of Teeth: 17/42

Clutch and brake lever set.

The clutch kit contains everything you need to repair your clutch.

Perfect hold for your grips. Contents: 20 g.

• Approvals: HOMNN_EU
• Volume: 20 g

• Volume: 100 ml

The repair kit is a two-component epoxy resin adhesive. Hardens at room temperature: accelerated hardening possible by raising the temperature.
Use: Particularly suitable for steel, but also other metals, wood, concrete, ceramics, glass and most plastics. The steel bond is resistant to, among other things, oil, gasoline, diesel and battery acid.
Processing: Best results are achieved with clean and rough surfaces. Cut off the required amount and knead for approx. 1 minute until a uniform color is achieved. Use within 2 minutes.
At first, it seems as if there is no adhesion. Just carry on and press the adhesive mixture into the surface. Remove any excess material. When coating or repairing surfaces that are still wet, leak or are under water, apply pressure until adhesion begins. Smooth flat with water by hand for an even surface. Wash your hands with soap and water (or with a Turbo cleaning towelette) immediately after completing your work. Hardening commences after 5 to 10 minutes. The repaired part can be used again after as little as 60 minutes. The surfaces to be glued must be dry and free from dust and grease. Contents: 56 g.

• Approvals: HOMNN_EU
• Volume: 56 g

Medium-strength thread lock. Suitable for all metal thread connections.

• Approvals: HOMNN_EU

Medium strength thread lock - contents, 50 ml.

• Temperature resistant from -55 to +200 °C 
• Fills gaps up to 0.25 mm
• Final strength achieved after 1 to 3 hours
  

• Approvals: HOMNN_EU
• Volume: 50 ml

This drive kit consists of a 16 tooth front and a 42 tooth rear sprocket wheel, a Regina chain and master link.

• Colour: Silver
• Number Of Teeth: 16/42

This drive kit consists of a 17 tooth front and a 42 tooth rear sprocket wheel, a chain and master link.

• Number Of Teeth: 17/42

The grip set includes a twist grip and a fixed grip.

HeliCoil plus

Spark plug thread repair selection M10x1 / M12x1.25 / M14x1.25.

This piston kit includes the piston and all the seals required to change the piston.

This piston kit includes the piston and all the seals required to change the piston.

Tool for clamping components (outer tube, fork leg)

• Type: Repair
• Technical Details: Diameter: 40 mm (1.57 in)

Tool for clamping components (fork legs, outer fork tube)

• Type: Repair
• Technical Details: Diameter: 48 mm (1.89 in)

Tool for pressing in components (heim joint)

• Type: Repair

WP shock absorber springs are high-performance springs and can be used to replace your original spring or to fine-tune your shock absorber to your own weight and height.

• Colour: Orange

The valve kit contains everything you need to repair your valves.

The repair kit contains everything you need to repair the bearing support in your wheel.

The repair kit contains everything you need to repair the bearing support in your wheel.