Vi använder cookies för att ge dig en bättre upplevelse av vår webbplats. Du kan välja att endast tillåta nödvändiga cookies eller tillåta alla cookies.
350 EXC-F (2018) POWERPARTS & ACCESSORIES

00062030051

Lagerstatus:
Pris: 145kr
Köp
Grip glue
Perfect hold for your grips. Contents: 20 g.

  • Approvals: HOMNN_EU
  • Volume: 20 g

00062030058

Lagerstatus: 2023-02-01
Pris: 100kr
Köp
Repair kit
The repair kit is a two-component epoxy resin adhesive. Hardens at room temperature: accelerated hardening possible by raising the temperature.
Use: Particularly suitable for steel, but also other metals, wood, concrete, ceramics, glass and most plastics. The steel bond is resistant to, among other things, oil, gasoline, diesel and battery acid.
Processing: Best results are achieved with clean and rough surfaces. Cut off the required amount and knead for approx. 1 minute until a uniform color is achieved. Use within 2 minutes.
At first, it seems as if there is no adhesion. Just carry on and press the adhesive mixture into the surface. Remove any excess material. When coating or repairing surfaces that are still wet, leak or are under water, apply pressure until adhesion begins. Smooth flat with water by hand for an even surface. Wash your hands with soap and water (or with a Turbo cleaning towelette) immediately after completing your work. Hardening commences after 5 to 10 minutes. The repaired part can be used again after as little as 60 minutes. The surfaces to be glued must be dry and free from dust and grease. Contents: 56 g.

  • Approvals: HOMNN_EU
  • Volume: 56 g
Visa hela beskrivningen

38-2920

Lagerstatus: 2023-02-02
Pris: 125kr
Köp
Thread lock

Medium-strength thread lock. Suitable for all metal thread connections.

  • Approvals: HOMNN_EU

00062030050

Lagerstatus:
Pris: 300kr
Köp
Thread lock

Medium strength thread lock - contents, 50 ml.

  • Temperature resistant from -55 to +200 °C 
  • Fills gaps up to 0.25 mm
  • Final strength achieved after 1 to 3 hours

  • Approvals: HOMNN_EU
  • Volume: 50 ml
Visa hela beskrivningen

SPAA14G52AM118A

Lagerstatus:
Pris: 1725kr
Köp
Drivetrain kit 14/52

The drivetrain kit consists of a front sprocket (14 tooth), a rear sprocket (52 tooth), and a DID chain.

  • Number Of Teeth: 14/52

63002021100

Lagerstatus:
Pris: 270kr
Köp
Grip set
  • Combines the durability of the KTM standard grips with the comfort of the soft KTM grips
  • Harder orange material on the inside and on the grip ends for long durability
  • Softer black material on the outside for increased comfort
  • Approvals: HOMNN_EU
  • Colour: Black
  • Note: Closed end
Visa hela beskrivningen

63002021200

Lagerstatus:
Pris: 270kr
Köp
Grip set
  • Combines the durability of the KTM standard grips with the comfort of the soft KTM grips
  • Harder orange material on the inside and on the grip ends for long durability
  • Softer black material on the outside for increased comfort
  • Approvals: HOMNN_EU
  • Colour: Black
  • Note: Open end
Visa hela beskrivningen

79002121200

Lagerstatus:
Pris: 295kr
Köp
Grip set
  • Right grip permanently glued to the throttle grip
  • Left grip with aluminum clamping ring for fixing on the handlebar
  • Inconvenient gluing and securing with wire no longer necessary
  • Approvals: HOMNN_EU
  • Colour: Black
  • Note: Open end
Visa hela beskrivningen

00050000083

Lagerstatus: 2023-02-01
Pris: 245kr
Köp
Oil filter kit

The oil filter kit contains all the filters, sieves, O-rings and seals you need for an oil change.


50329080200

Lagerstatus:
Pris: 145kr
Köp
Multi-purpose fork wrench
KTM multi-purpose fork wrench AF-"17/21/27/32" - chrome vanadium in KTM blister pack.


79230507010I

Lagerstatus:
Pris: 3035kr
Köp
Piston kit size I
This piston kit includes the piston and all the seals required to change the piston.


79230507010II

Lagerstatus: 2023-02-02
Pris: 3035kr
Köp
Piston kit size II
The piston kit includes the piston and all the seals required to change the piston.


T1205

Lagerstatus: 2023-02-01
Pris: 350kr
Köp
Calibrating unit
Tool for calibrating components (DU bush)

  • Type: Repair
  • Technical Details: Diameter: 18 mm (0.71 in)

T1403S

Lagerstatus: 2023-02-20
Pris: 795kr
Köp
Clamping stand
Tool for clamping components (fork legs, outer fork tube)

  • Type: Repair
  • Technical Details: Diameter: 48 mm (1.89 in)

T107S

Lagerstatus:
Pris: 470kr
Köp
Depth micrometer
Tool for determining distances

  • Type: Repair

T170S1

Lagerstatus: 2023-02-20
Pris: 5260kr
Köp
Filling tool
Tool for filling the damper with nitrogen

  • Type: Repair
REKOMMENDERADE PRODUKTER
Filling adapter
T1565
Filling adapter
T1296
RESERVDELAR
36120060

T1204

Lagerstatus: 2023-02-01
Pris: 265kr
Köp
Mounting sleeve
Tool for mounting and pressing out components (dirt scraper, DU bush)

  • Type: Repair
  • Technical Details: Diameter: 25.5 … 30.5 mm (1.004 … 1.201 in)

T150S

Lagerstatus: 2023-02-01
Pris: 525kr
Köp
Mounting tool
Tool for pressing in components (DU bush in seal ring retainer)

  • Type: Repair

T1206

Lagerstatus: 2023-02-01
Pris: 295kr
Köp
Pressing tool
Tool for pressing in components (heim joint)

  • Type: Repair
  • Technical Details: Diameter: 15 … 30 mm (0.59 … 1.18 in)

T1207S

Lagerstatus: 2023-02-01
Pris: 430kr
Köp
Pressing tool
Tool for pressing in components (heim joint)

  • Type: Repair

91410098S

Lagerstatus: 2023-02-01
Pris: 1265kr
Köp
Fork spring set
WP fork springs are high-performance springs and can be used to replace your original spring or to fine-tune your fork to your own weight and height.

  • Type: 8

91010348

Lagerstatus: 2023-02-01
Pris: 1250kr
Köp
Shock absorber spring
WP shock absorber springs are high-performance springs and can be used to replace your original spring or to fine-tune your shock absorber to your own weight and height.

  • Colour: White

79236030110

Lagerstatus: 2023-02-01
Pris: 5925kr
Köp
Valve kit
The valve kit contains everything you need to repair the valves.