Vi använder cookies för att ge dig en bättre upplevelse av vår webbplats. Du kan välja att endast tillåta nödvändiga cookies eller tillåta alla cookies.
Pris: 1650kr
Köp
Piston kit size II
This piston kit includes the piston and all the seals required to change the piston.
This piston kit includes the piston and all the seals required to change the piston. <p></p> dölj mer info
Pris: 145kr
Köp
Grip glue
Perfect hold for your grips. Contents: 20 g.
- Approvals: HOMNN_EU
- Volume: 20 g
Perfect hold for your grips. Contents: 20 g. <p></p> dölj mer info
Pris: 100kr
Köp
Repair kit
The repair kit is a two-component epoxy resin adhesive. Hardens at room temperature: accelerated hardening possible by raising the temperature.
Use: Particularly suitable for steel, but also other metals, wood, concrete, ceramics, glass and most plastics. The steel bond is resistant to, among other things, oil, gasoline, diesel and battery acid.
Processing: Best results are achieved with clean and rough surfaces. Cut off the required amount and knead for approx. 1 minute until a uniform color is achieved. Use within 2 minutes.
At first, it seems as if there is no adhesion. Just carry on and press the adhesive mixture into the surface. Remove any excess material. When coating or repairing surfaces that are still wet, leak or are under water, apply pressure until adhesion begins. Smooth flat with water by hand for an even surface. Wash your hands with soap and water (or with a Turbo cleaning towelette) immediately after completing your work. Hardening commences after 5 to 10 minutes. The repaired part can be used again after as little as 60 minutes. The surfaces to be glued must be dry and free from dust and grease. Contents: 56 g.
Use: Particularly suitable for steel, but also other metals, wood, concrete, ceramics, glass and most plastics. The steel bond is resistant to, among other things, oil, gasoline, diesel and battery acid.
Processing: Best results are achieved with clean and rough surfaces. Cut off the required amount and knead for approx. 1 minute until a uniform color is achieved. Use within 2 minutes.
At first, it seems as if there is no adhesion. Just carry on and press the adhesive mixture into the surface. Remove any excess material. When coating or repairing surfaces that are still wet, leak or are under water, apply pressure until adhesion begins. Smooth flat with water by hand for an even surface. Wash your hands with soap and water (or with a Turbo cleaning towelette) immediately after completing your work. Hardening commences after 5 to 10 minutes. The repaired part can be used again after as little as 60 minutes. The surfaces to be glued must be dry and free from dust and grease. Contents: 56 g.
- Approvals: HOMNN_EU
- Volume: 56 g
The repair kit is a two-component epoxy resin adhesive. Hardens at room temperature: accelerated hardening possible by raising the temperature. <br />Use: Particularly suitable for steel, but also other metals, wood, concrete, ceramics, glass and most plastics. The steel bond is resistant to, among other things, oil, gasoline, diesel and battery acid. <br />Processing: Best results are achieved with clean and rough surfaces. Cut off the required amount and knead for approx. 1 minute until a uniform color is achieved. Use within 2 minutes.<br />At first, it seems as if there is no adhesion. Just carry on and press the adhesive mixture into the surface. Remove any excess material. When coating or repairing surfaces that are still wet, leak or are under water, apply pressure until adhesion begins. Smooth flat with water by hand for an even surface. Wash your hands with soap and water (or with a Turbo cleaning towelette) immediately after completing your work. Hardening commences after 5 to 10 minutes. The repaired part can be used again after as little as 60 minutes. The surfaces to be glued must be dry and free from dust and grease. Contents: 56 g.<p></p> dölj mer info
Pris: 125kr
Köp
Thread lock
Medium-strength thread lock. Suitable for all metal thread connections.
- Approvals: HOMNN_EU
<p> Medium-strength thread lock. Suitable for all metal thread connections.<br /></p><p></p> dölj mer info
Pris: 300kr
Köp
Thread lock
Medium strength thread lock - contents, 50 ml.
- Temperature resistant from -55 to +200 °C
- Fills gaps up to 0.25 mm
- Final strength achieved after 1 to 3 hours
- Approvals: HOMNN_EU
- Volume: 50 ml
<p>Medium strength thread lock - contents, 50 ml.</p><ul><li>Temperature resistant from -55 to +200 °C </li><li>Fills gaps up to 0.25 mm</li><li>Final strength achieved after 1 to 3 hours<br /></li></ul><p></p> dölj mer info
Pris: 640kr
Köp
Exhaust parts kit
The exhaust parts kit contains everything you need to repair your exhaust system.
The exhaust parts kit contains everything you need to repair your exhaust system.<p></p> dölj mer info
Pris: 270kr
Köp
Grip set
- Combines the durability of the KTM standard grips with the comfort of the soft KTM grips
- Harder orange material on the inside and on the grip ends for long durability
- Softer black material on the outside for increased comfort
- Approvals: HOMNN_EU
- Colour: Black
- Note: Closed end
<ul><li>Combines the durability of the KTM standard grips with the comfort of the soft KTM grips</li><li>Harder orange material on the inside and on the grip ends for long durability</li><li>Softer black material on the outside for increased comfort</li></ul><p></p> dölj mer info
Pris: 295kr
Köp
Grip set
- Right grip permanently glued to the throttle grip
- Left grip with aluminum clamping ring for fixing on the handlebar
- Inconvenient gluing and securing with wire no longer necessary
- Approvals: HOMNN_EU
- Colour: Black
- Note: Open end
<ul><li>Right grip permanently glued to the throttle grip</li><li>Left grip with aluminum clamping ring for fixing on the handlebar</li><li>Inconvenient gluing and securing with wire no longer necessary</li></ul><p></p> dölj mer info
Pris: 145kr
Köp
Multi-purpose fork wrench
KTM multi-purpose fork wrench AF-"17/21/27/32" - chrome vanadium in KTM blister pack.
KTM multi-purpose fork wrench AF-"17/21/27/32" - chrome vanadium in KTM blister pack.<p></p> dölj mer info
Pris: 1650kr
Köp
Piston kit size I
This piston kit includes the piston and all the seals required to change the piston.
This piston kit includes the piston and all the seals required to change the piston. <p></p> dölj mer info
Pris: 1650kr
Köp
Piston kit size II
This piston kit includes the piston and all the seals required to change the piston.
This piston kit includes the piston and all the seals required to change the piston. <p></p> dölj mer info
Lagerstatus: 2022-07-12
Pris: 815kr
Köp
Clamping stand
Tool for clamping components (outer tube, fork leg)
- Type: Repair
- Technical Details: Diameter: 40 mm (1.57 in)
Tool for clamping components (outer tube, fork leg)<p></p> dölj mer info
Pris: 470kr
Köp
Depth micrometer
Tool for determining distances
- Type: Repair
Tool for determining distances<p></p> dölj mer info
Lagerstatus: 2022-07-12
Pris: 5260kr
Köp
Filling tool
Tool for filling the damper with nitrogen
- Type: Repair
Tool for filling the damper with nitrogen<p></p> dölj mer info
REKOMMENDERADE PRODUKTER
Filling adapter
T1565
Filling adapter
T1296
RESERVDELAR
Lagerstatus: 2022-07-12
Pris: 265kr
Köp
Mounting sleeve
Tool for mounting and pressing out components (dirt scraper, DU bush)
- Type: Repair
- Technical Details: Diameter: 25.5 … 30.5 mm (1.004 … 1.201 in)
Tool for mounting and pressing out components (dirt scraper, DU bush)<p></p> dölj mer info
Lagerstatus: 2022-07-12
Pris: 295kr
Köp
Pressing tool
Tool for pressing in components (heim joint)
- Type: Repair
- Technical Details: Diameter: 15 … 30 mm (0.59 … 1.18 in)
Tool for pressing in components (heim joint)<p></p> dölj mer info
Lagerstatus: 2022-07-12
Pris: 430kr
Köp
Pressing tool
Tool for pressing in components (heim joint)
- Type: Repair
Tool for pressing in components (heim joint)<p></p> dölj mer info
Lagerstatus: 2022-07-12
Pris: 1030kr
Köp
Shock absorber spring
WP shock absorber springs are high-performance springs and can be used to replace your original spring or to fine-tune your shock absorber to your own weight and height.
- Colour: White
- Type: 8
WP shock absorber springs are high-performance springs and can be used to replace your original spring or to fine-tune your shock absorber to your own weight and height.<p></p> dölj mer info
Lagerstatus: 2022-08-29
Pris: 775kr
Köp
Front wheel repair kit
The repair kit contains everything you need to repair the bearing support in your wheel.
The repair kit contains everything you need to repair the bearing support in your wheel.<p></p> dölj mer info
Lagerstatus: 2022-07-12
Pris: 715kr
Köp
Rear wheel repair kit
The repair kit contains everything you need to repair the bearing support in your wheel.
The repair kit contains everything you need to repair the bearing support in your wheel.<p></p> dölj mer info
