Vi använder cookies för att ge dig en bättre upplevelse av vår webbplats. Du kan välja att endast tillåta nödvändiga cookies eller tillåta alla cookies.
125 SX (2019) POWERPARTS & ACCESSORIES

00062030051

Lagerstatus:
Pris: 145kr
Köp
Grip glue
Perfect hold for your grips. Contents: 20 g.

  • Approvals: HOMNN_EU
  • Volume: 20 g
Perfect hold for your grips. Contents: 20 g. <p></p> dölj mer info

50302036200

Lagerstatus:
Pris: 145kr
Köp
Hydraulic clutch oil
Hydraulic clutch oil - contents, 100 ml.

  • Volume: 100 ml
Hydraulic clutch oil - contents, 100 ml.<p></p> dölj mer info

00062030058

Lagerstatus:
Pris: 100kr
Köp
Repair kit
The repair kit is a two-component epoxy resin adhesive. Hardens at room temperature: accelerated hardening possible by raising the temperature.
Use: Particularly suitable for steel, but also other metals, wood, concrete, ceramics, glass and most plastics. The steel bond is resistant to, among other things, oil, gasoline, diesel and battery acid.
Processing: Best results are achieved with clean and rough surfaces. Cut off the required amount and knead for approx. 1 minute until a uniform color is achieved. Use within 2 minutes.
At first, it seems as if there is no adhesion. Just carry on and press the adhesive mixture into the surface. Remove any excess material. When coating or repairing surfaces that are still wet, leak or are under water, apply pressure until adhesion begins. Smooth flat with water by hand for an even surface. Wash your hands with soap and water (or with a Turbo cleaning towelette) immediately after completing your work. Hardening commences after 5 to 10 minutes. The repaired part can be used again after as little as 60 minutes. The surfaces to be glued must be dry and free from dust and grease. Contents: 56 g.

  • Approvals: HOMNN_EU
  • Volume: 56 g
The repair kit is a two-component epoxy resin adhesive. Hardens at room temperature: accelerated hardening possible by raising the temperature. <br />Use: Particularly suitable for steel, but also other metals, wood, concrete, ceramics, glass and most plastics. The steel bond is resistant to, among other things, oil, gasoline, diesel and battery acid. <br />Processing: Best results are achieved with clean and rough surfaces. Cut off the required amount and knead for approx. 1 minute until a uniform color is achieved. Use within 2 minutes.<br />At first, it seems as if there is no adhesion. Just carry on and press the adhesive mixture into the surface. Remove any excess material. When coating or repairing surfaces that are still wet, leak or are under water, apply pressure until adhesion begins. Smooth flat with water by hand for an even surface. Wash your hands with soap and water (or with a Turbo cleaning towelette) immediately after completing your work. Hardening commences after 5 to 10 minutes. The repaired part can be used again after as little as 60 minutes. The surfaces to be glued must be dry and free from dust and grease. Contents: 56 g.<p></p> dölj mer info

38-2920

Lagerstatus:
Pris: 125kr
Köp
Thread lock

Medium-strength thread lock. Suitable for all metal thread connections.

  • Approvals: HOMNN_EU
<p> Medium-strength thread lock. Suitable for all metal thread connections.<br /></p><p></p> dölj mer info

00062030050

Lagerstatus:
Pris: 300kr
Köp
Thread lock

Medium strength thread lock - contents, 50 ml.

  • Temperature resistant from -55 to +200 °C 
  • Fills gaps up to 0.25 mm
  • Final strength achieved after 1 to 3 hours

  • Approvals: HOMNN_EU
  • Volume: 50 ml
<p>Medium strength thread lock - contents, 50 ml.</p><ul><li>Temperature resistant from -55 to +200 °C </li><li>Fills gaps up to 0.25 mm</li><li>Final strength achieved after 1 to 3 hours<br /></li></ul><p></p> dölj mer info

50430097000

Lagerstatus:
Pris: 425kr
Köp
Cylinder seal set

The seal set contains all the seals you need to repair your cylinder.

<p>The seal set contains all the seals you need to repair your cylinder.</p><p></p> dölj mer info

63002021100

Lagerstatus:
Pris: 270kr
Köp
Grip set
  • Combines the durability of the KTM standard grips with the comfort of the soft KTM grips
  • Harder orange material on the inside and on the grip ends for long durability
  • Softer black material on the outside for increased comfort

  • Approvals: HOMNN_EU
  • Colour: Black
  • Note: Closed end
<ul><li>Combines the durability of the KTM standard grips with the comfort of the soft KTM grips</li><li>Harder orange material on the inside and on the grip ends for long durability</li><li>Softer black material on the outside for increased comfort</li></ul><p></p> dölj mer info

63002021200

Lagerstatus:
Pris: 270kr
Köp
Grip set
  • Combines the durability of the KTM standard grips with the comfort of the soft KTM grips
  • Harder orange material on the inside and on the grip ends for long durability
  • Softer black material on the outside for increased comfort

  • Approvals: HOMNN_EU
  • Colour: Black
  • Note: Open end
<ul><li>Combines the durability of the KTM standard grips with the comfort of the soft KTM grips</li><li>Harder orange material on the inside and on the grip ends for long durability</li><li>Softer black material on the outside for increased comfort</li></ul><p></p> dölj mer info

79002121200

Lagerstatus:
Pris: 295kr
Köp
Grip set
  • Right grip permanently glued to the throttle grip
  • Left grip with aluminum clamping ring for fixing on the handlebar
  • Inconvenient gluing and securing with wire no longer necessary

  • Approvals: HOMNN_EU
  • Colour: Black
  • Note: Open end
<ul><li>Right grip permanently glued to the throttle grip</li><li>Left grip with aluminum clamping ring for fixing on the handlebar</li><li>Inconvenient gluing and securing with wire no longer necessary</li></ul><p></p> dölj mer info

50430007110I

Lagerstatus: 2022-07-12
Pris: 2005kr
Köp
Piston kit size I
This piston kit includes the piston and all the seals required to change the piston.

This piston kit includes the piston and all the seals required to change the piston. <p></p> dölj mer info

50430007110II

Lagerstatus: 2022-07-12
Pris: 2005kr
Köp
Piston kit size II
This piston kit includes the piston and all the seals required to change the piston.

This piston kit includes the piston and all the seals required to change the piston. <p></p> dölj mer info

T1205

Lagerstatus: 2022-07-12
Pris: 350kr
Köp
Calibrating unit
Tool for calibrating components (DU bush)

  • Type: Repair
  • Technical Details: Diameter: 18 mm (0.71 in)
Tool for calibrating components (DU bush)<p></p> dölj mer info

T1403S

Lagerstatus: 2022-07-14
Pris: 795kr
Köp
Clamping stand
Tool for clamping components (fork legs, outer fork tube)

  • Type: Repair
  • Technical Details: Diameter: 48 mm (1.89 in)
Tool for clamping components (fork legs, outer fork tube)<p></p> dölj mer info

T107S

Lagerstatus:
Pris: 470kr
Köp
Depth micrometer
Tool for determining distances

  • Type: Repair
Tool for determining distances<p></p> dölj mer info

T170S1

Lagerstatus: 2022-07-12
Pris: 5260kr
Köp
Filling tool
Tool for filling the damper with nitrogen

  • Type: Repair
Tool for filling the damper with nitrogen<p></p> dölj mer info
REKOMMENDERADE PRODUKTER
Filling adapter
T1565
Filling adapter
T1296
RESERVDELAR

T1204

Lagerstatus: 2022-07-12
Pris: 265kr
Köp
Mounting sleeve
Tool for mounting and pressing out components (dirt scraper, DU bush)

  • Type: Repair
  • Technical Details: Diameter: 25.5 … 30.5 mm (1.004 … 1.201 in)
Tool for mounting and pressing out components (dirt scraper, DU bush)<p></p> dölj mer info

T150S

Lagerstatus: 2022-07-12
Pris: 525kr
Köp
Mounting tool
Tool for pressing in components (DU bush in seal ring retainer)

  • Type: Repair
Tool for pressing in components (DU bush in seal ring retainer)<p></p> dölj mer info

T1206

Lagerstatus: 2022-07-12
Pris: 295kr
Köp
Pressing tool
Tool for pressing in components (heim joint)

  • Type: Repair
  • Technical Details: Diameter: 15 … 30 mm (0.59 … 1.18 in)
Tool for pressing in components (heim joint)<p></p> dölj mer info

T1216

Lagerstatus: 2022-07-12
Pris: 345kr
Köp
Pressing tool
Tool for pressing in components (seal ring retainer of piston rod)

  • Type: Repair
  • Technical Details: Diameter: 38 … 49 mm (1.5 … 1.93 in)
Tool for pressing in components (seal ring retainer of piston rod)<p></p> dölj mer info

T1207S

Lagerstatus: 2022-07-12
Pris: 430kr
Köp
Pressing tool
Tool for pressing in components (heim joint)

  • Type: Repair
Tool for pressing in components (heim joint)<p></p> dölj mer info

91210100S

Lagerstatus: 2022-07-12
Pris: 1250kr
Köp
Shock absorber spring
WP shock absorber springs are high-performance springs and can be used to replace your original spring or to fine-tune your shock absorber to your own weight and height.

  • Colour: White
WP shock absorber springs are high-performance springs and can be used to replace your original spring or to fine-tune your shock absorber to your own weight and height.<p></p> dölj mer info