Perfect hold for your grips. Contents: 20 g.

• Approvals: HOMNN_EU
• Volume: 20 g

The repair kit is a two-component epoxy resin adhesive. Hardens at room temperature: accelerated hardening possible by raising the temperature.
Use: Particularly suitable for steel, but also other metals, wood, concrete, ceramics, glass and most plastics. The steel bond is resistant to, among other things, oil, gasoline, diesel and battery acid.
Processing: Best results are achieved with clean and rough surfaces. Cut off the required amount and knead for approx. 1 minute until a uniform color is achieved. Use within 2 minutes.
At first, it seems as if there is no adhesion. Just carry on and press the adhesive mixture into the surface. Remove any excess material. When coating or repairing surfaces that are still wet, leak or are under water, apply pressure until adhesion begins. Smooth flat with water by hand for an even surface. Wash your hands with soap and water (or with a Turbo cleaning towelette) immediately after completing your work. Hardening commences after 5 to 10 minutes. The repaired part can be used again after as little as 60 minutes. The surfaces to be glued must be dry and free from dust and grease. Contents: 56 g.

• Approvals: HOMNN_EU
• Volume: 56 g

Medium-strength thread lock. Suitable for all metal thread connections.

• Approvals: HOMNN_EU

Medium strength thread lock - contents, 50 ml.

• Temperature resistant from -55 to +200 °C 
• Fills gaps up to 0.25 mm
• Final strength achieved after 1 to 3 hours
  

• Approvals: HOMNN_EU
• Volume: 50 ml

The oil filter kit contains all the filters, sieves, O-rings and seals you need for an oil change.

WP fork springs are high-performance springs and can be used to replace your original spring or to fine-tune your fork to your own weight and height.

• Type: 8

WP shock absorber springs are high-performance springs and can be used to replace your original spring or to fine-tune your shock absorber to your own weight and height.

• Colour: White