300 EXC TPI (2021) POWERPARTS & ACCESSORIES

54832011110

Lagerstatus: 2022-03-11
Pris: 2005kr
Köp
Clutch kit
The clutch kit contains everything you need to repair your clutch.

The clutch kit contains everything you need to repair your clutch.<p></p> dölj mer info

00062030051

Lagerstatus:
Pris: 125kr
Köp
Grip glue
Perfect hold for your grips. Contents: 20 g.

  • Approvals: HOMNN_EU
  • Volume: 20 g
Perfect hold for your grips. Contents: 20 g. <p></p> dölj mer info

00062030058

Lagerstatus:
Pris: 90kr
Köp
Repair kit
The repair kit is a two-component epoxy resin adhesive. Hardens at room temperature: accelerated hardening possible by raising the temperature.
Use: Particularly suitable for steel, but also other metals, wood, concrete, ceramics, glass and most plastics. The steel bond is resistant to, among other things, oil, gasoline, diesel and battery acid.
Processing: Best results are achieved with clean and rough surfaces. Cut off the required amount and knead for approx. 1 minute until a uniform color is achieved. Use within 2 minutes.
At first, it seems as if there is no adhesion. Just carry on and press the adhesive mixture into the surface. Remove any excess material. When coating or repairing surfaces that are still wet, leak or are under water, apply pressure until adhesion begins. Smooth flat with water by hand for an even surface. Wash your hands with soap and water (or with a Turbo cleaning towelette) immediately after completing your work. Hardening commences after 5 to 10 minutes. The repaired part can be used again after as little as 60 minutes. The surfaces to be glued must be dry and free from dust and grease. Contents: 56 g.

  • Approvals: HOMNN_EU
  • Volume: 56 g
The repair kit is a two-component epoxy resin adhesive. Hardens at room temperature: accelerated hardening possible by raising the temperature. <br />Use: Particularly suitable for steel, but also other metals, wood, concrete, ceramics, glass and most plastics. The steel bond is resistant to, among other things, oil, gasoline, diesel and battery acid. <br />Processing: Best results are achieved with clean and rough surfaces. Cut off the required amount and knead for approx. 1 minute until a uniform color is achieved. Use within 2 minutes.<br />At first, it seems as if there is no adhesion. Just carry on and press the adhesive mixture into the surface. Remove any excess material. When coating or repairing surfaces that are still wet, leak or are under water, apply pressure until adhesion begins. Smooth flat with water by hand for an even surface. Wash your hands with soap and water (or with a Turbo cleaning towelette) immediately after completing your work. Hardening commences after 5 to 10 minutes. The repaired part can be used again after as little as 60 minutes. The surfaces to be glued must be dry and free from dust and grease. Contents: 56 g.<p></p> dölj mer info

38-2920

Lagerstatus:
Pris: 125kr
Köp
Thread lock

Medium-strength thread lock. Suitable for all metal thread connections.

  • Approvals: HOMNN_EU
<p> Medium-strength thread lock. Suitable for all metal thread connections.<br /></p><p></p> dölj mer info

00062030050

Lagerstatus: 2021-11-02
Pris: 385kr
Köp
Thread lock

Medium strength thread lock - contents, 50 ml.

  • Temperature resistant from -55 to +200 °C 
  • Fills gaps up to 0.25 mm
  • Final strength achieved after 1 to 3 hours

  • Approvals: HOMNN_EU
  • Volume: 50 ml
<p>Medium strength thread lock - contents, 50 ml.</p><ul><li>Temperature resistant from -55 to +200 °C </li><li>Fills gaps up to 0.25 mm</li><li>Final strength achieved after 1 to 3 hours<br /></li></ul><p></p> dölj mer info

55430097001

Lagerstatus:
Pris: 500kr
Köp
Cylinder seal set

The seal set contains all the seals you need to repair your cylinder.

<p>The seal set contains all the seals you need to repair your cylinder.</p><p></p> dölj mer info

00050002094

Lagerstatus: 2021-11-02
Pris: 1685kr
Köp
Drivetrain kit 14/50
The drivetrain kit consists of the front (14 tooth) and the rear sprocket (50 tooth), as well as a DID chain.

  • Number Of Teeth: 14/50
The drivetrain kit consists of the front (14 tooth) and the rear sprocket (50 tooth), as well as a DID chain.<p></p> dölj mer info

00050000811

Lagerstatus:
Pris: 565kr
Köp
Exhaust parts kit
The exhaust parts kit contains everything you need to repair your exhaust system.

The exhaust parts kit contains everything you need to repair your exhaust system.<p></p> dölj mer info

63002021100

Lagerstatus:
Pris: 265kr
Köp
Grip set
  • Combines the durability of the KTM standard grips with the comfort of the soft KTM grips
  • Harder orange material on the inside and on the grip ends for long durability
  • Softer black material on the outside for increased comfort

  • Approvals: HOMNN_EU
  • Colour: Black
  • Note: Closed end
<ul><li>Combines the durability of the KTM standard grips with the comfort of the soft KTM grips</li><li>Harder orange material on the inside and on the grip ends for long durability</li><li>Softer black material on the outside for increased comfort</li></ul><p></p> dölj mer info

63002021200

Lagerstatus:
Pris: 265kr
Köp
Grip set
  • Combines the durability of the KTM standard grips with the comfort of the soft KTM grips
  • Harder orange material on the inside and on the grip ends for long durability
  • Softer black material on the outside for increased comfort

  • Approvals: HOMNN_EU
  • Colour: Black
  • Note: Open end
<ul><li>Combines the durability of the KTM standard grips with the comfort of the soft KTM grips</li><li>Harder orange material on the inside and on the grip ends for long durability</li><li>Softer black material on the outside for increased comfort</li></ul><p></p> dölj mer info

79002121200

Lagerstatus:
Pris: 285kr
Köp
Grip set
  • Right grip permanently glued to the throttle grip
  • Left grip with aluminum clamping ring for fixing on the handlebar
  • Inconvenient gluing and securing with wire no longer necessary

  • Approvals: HOMNN_EU
  • Colour: Black
  • Note: Open end
<ul><li>Right grip permanently glued to the throttle grip</li><li>Left grip with aluminum clamping ring for fixing on the handlebar</li><li>Inconvenient gluing and securing with wire no longer necessary</li></ul><p></p> dölj mer info

50329080100

Lagerstatus:
Pris: 140kr
Köp
Multi-purpose fork wrench
KTM multi-purpose fork wrench AF-"17/21/27/32" - chrome vanadium in KTM blister pack.

KTM multi-purpose fork wrench AF-"17/21/27/32" - chrome vanadium in KTM blister pack.<p></p> dölj mer info

00050000265

Lagerstatus: Obekräftad
Pris: 2285kr
Köp
Piston kit size I
This piston kit includes the piston and all the seals required to change the piston.
This piston kit includes the piston and all the seals required to change the piston. dölj mer info

79006015000

Lagerstatus:
Pris: 220kr
Köp
Air filter
Air filter - single orderable
Air filter - single orderable dölj mer info

79006015000A

Lagerstatus:
Pris: 220kr
Köp
Pre-oiled air filter
Individual pre-oiled air filter

Individual pre-oiled air filter <br /><p></p> dölj mer info

91410098S

Lagerstatus: 2021-11-02
Pris: 1415kr
Köp
Fork spring set
Can only be used with PRO COMPONENTS products.

  • Type: 8
Can only be used with PRO COMPONENTS products.<p></p> dölj mer info

91010348

Lagerstatus: 2021-11-02
Pris: 1525kr
Köp
Shock absorber spring
WP shock absorber springs are high-performance springs and can be used to replace your original spring or to fine-tune your shock absorber to your own weight and height.

  • Colour: White
WP shock absorber springs are high-performance springs and can be used to replace your original spring or to fine-tune your shock absorber to your own weight and height.<p></p> dölj mer info