105 SX (2004) POWERPARTS & ACCESSORIES

59006019000

Lagerstatus: hos lev.
Pris: 115kr
PowerParts|Airfilter
Air filter dust protection
This large-pored air filter cover acts as an additional protective layer, hence extending the filter service interval. Recommended in extremely dusty conditions.
This large-pored air filter cover acts as an additional protective layer, hence extending the filter service interval. Recommended in extremely dusty conditions. dölj mer info

7720691705004

Lagerstatus: 1
Pris: 230kr
PowerParts|Airfilter
Air filter retaining pin

Small part with a big impact. Every now and again when riding hard offroad, the air filter may detach from the mounting bracket and end up lying loosely in the air box. This would automatically mean the end of your race. The threaded air filter retaining bush prevents this from happening.

<p>Small part with a big impact. Every now and again when riding hard offroad, the air filter may detach from the mounting bracket and end up lying loosely in the air box. This would automatically mean the end of your race. The threaded air filter retaining bush prevents this from happening.</p> dölj mer info

59006922000

Lagerstatus: 5
Pris: 195kr
PowerParts|Airfilter
Air filter sand protection
Recommended for use on sandy tracks. Installation together with oiled air filter and dry dust guard 77206920100.
Recommended for use on sandy tracks. Installation together with oiled air filter and dry dust guard 77206920100. dölj mer info

59006021000

Lagerstatus: 5
Pris: 115kr
PowerParts|Airfilter
Air filter water protection
Recommended in extremely wet conditions.
Recommended in extremely wet conditions. dölj mer info

47201996000

Lagerstatus: 1
Pris: 1040kr
PowerParts|Archive
Factory start device
This is how the factory riders start! The factory start is mounted directly on the fork. Before the start, the fork is dipped and fixed in the desired position to shift the center of gravity forwards. This to a large extent prevents the front wheel from lifting at the start, thus providing greater traction and perhaps securing you the odd holeshot or two. The first time the fork dips, the fixing is slackened and the fork released automatically.
This is how the factory riders start! The factory start is mounted directly on the fork. Before the start, the fork is dipped and fixed in the desired position to shift the center of gravity forwards. This to a large extent prevents the front wheel from lifting at the start, thus providing greater traction and perhaps securing you the odd holeshot or two. The first time the fork dips, the fixing is slackened and the fork released automatically. dölj mer info

77312066000

Lagerstatus: 3
Pris: 1629kr
PowerParts|Archive
Fork air pump
Recommended tool for tuning the closed-cartridge fork precisely to your requirements. For adjusting the air pressure on the compression damping.
Recommended tool for tuning the closed-cartridge fork precisely to your requirements. For adjusting the air pressure on the compression damping. dölj mer info

00029098000

Lagerstatus: 1
Pris: 805kr
PowerParts|Archive
Toolbox
38-piece, 1/4" toolbox in orange with high-quality, chrome-vanadium tools.
Volume:
  • Ratchet (with locking device), lever, two extensions and socket wrench
  • Hexagon sockets from 4 to 14
  • Allen keys from 3 to 8
  • Phillips, slotted and Torx bits
With this, small jobs on your KTM can be completed quickly and reliably. Whether you're removing fairings or changing the oil, you'll definitely find the right tool here.
38-piece, 1/4" toolbox in orange with high-quality, chrome-vanadium tools.<br />Volume:<ul><li class="li-disc"> Ratchet (with locking device), lever, two extensions and socket wrench</li><li class="li-disc"> Hexagon sockets from 4 to 14</li><li class="li-disc"> Allen keys from 3 to 8</li><li class="li-disc"> Phillips, slotted and Torx bits</li></ul>With this, small jobs on your KTM can be completed quickly and reliably. Whether you're removing fairings or changing the oil, you'll definitely find the right tool here. dölj mer info

77713975120

Lagerstatus: hos lev.
Pris: 1160kr
PowerParts|Brakes|Brake calliper
Brake caliper protection
<ul><li class="li-square">Manufactured from carbon</li><li class="li-square">Optimum protection against stone impacts</li><li class="li-square">Can be installed on brake caliper supports 777.13.975.010.30, 777.13.975.110.30, 781.13.975.044, 781.13.975.144, 781.13.975.244, 789.13.975.044 or 789.13.975.144</li></ul> dölj mer info

SXS07125712

Lagerstatus: hos lev.
Pris: 12095kr
PowerParts|Brakes|Brake calliper
Factory brake caliper
The SXS brake calliper is manufactured from high-strength aluminium, which makes it stiffer without adding any weight. The increased stiffness of the brake calliper results in a more precise pressure point and improved brake power. When fitting to SX models as of MY 2013, the CNC brake calliper support (777.13.975.110.30) must be used instead of the supplied brake calliper support due to the larger axle diameter.
The SXS brake calliper is manufactured from high-strength aluminium, which makes it stiffer without adding any weight. The increased stiffness of the brake calliper results in a more precise pressure point and improved brake power. When fitting to SX models as of MY 2013, the CNC brake calliper support (777.13.975.110.30) must be used instead of the supplied brake calliper support due to the larger axle diameter. dölj mer info

47010060100

Lagerstatus: hos lev.
Pris: 1270kr
PowerParts|Brakes|Brake Discs
Wave brake disc
SX 85/105
SX 85/105 dölj mer info

47013014000

Lagerstatus: hos lev.
Pris: 1270kr
PowerParts|Brakes|Special parts
Brake caliper support
Please read the fitting instructions. Here you'll find the all the necessary parts for conversion.
Please read the fitting instructions. Here you'll find the all the necessary parts for conversion. dölj mer info

54812063044

Lagerstatus: 3
Pris: 115kr
PowerParts|Brakes|Special parts
Rear brake safety wire

Prevents twigs being caught between the engine and the foot brake lever and the foot brake lever being bent or blocked by this.

<p>Prevents twigs being caught between the engine and the foot brake lever and the foot brake lever being bent or blocked by this.</p> dölj mer info

SXS04125100

Lagerstatus: 3
Pris: 505kr
PowerParts|Carbon|Offroad
Carbon fuel tap guard
DO YOU KNOW about the special properties of carbon?
  • Extremely light: about 80% lighter than steel with the same load-bearing capacity
  • Very stable: 4 times more resilient than aluminum
  • Ultimate stiffness and strength
  • Free from corrosion
  • High continuous temperature resistance
  • Low thermal expansion
  • And, last but not least, a cool look
    Pimp your KTM with carbon components from KTM PowerParts - they save weight and look great.
Prevents inadvertent actuation of the fuel tap.
DO YOU KNOW about the special properties of carbon?<ul><li class="li-disc"> Extremely light: about 80% lighter than steel with the same load-bearing capacity</li><li class="li-disc"> Very stable: 4 times more resilient than aluminum</li><li class="li-disc"> Ultimate stiffness and strength</li><li class="li-disc"> Free from corrosion</li><li class="li-disc"> High continuous temperature resistance</li><li class="li-disc"> Low thermal expansion</li><li class="li-disc"> And, last but not least, a cool look<br />Pimp your KTM with carbon components from KTM PowerParts - they save weight and look great.</li></ul>Prevents inadvertent actuation of the fuel tap. dölj mer info

4701005114804

Lagerstatus: 2
Pris: 760kr
PowerParts|Chains/Sprockets|Sprockets
Supersprox stealth rear sprocket
If you're looking for the ultimate in quality and performance, this sprocket is the one for you!
  • High-strength steel teeth
  • Aluminium inner ring
  • Joined together permanently with high-strength rivets
  • At least three times longer service life than other aluminum rear sprockets
  • Only half as heavy as conventional steel rear sprockets
Another benefit: longer service life for the entire drivetrain

Made exclusively for KTM by Supersprox. This product is protected in the EU and the USA by the following patents. EU patent # EP1573234. US patent # 7.481.729. Patent holder Supersprox a.s.

If you're looking for the ultimate in quality and performance, this sprocket is the one for you!<ul><li class="li-disc">High-strength steel teeth</li><li class="li-disc">Aluminium inner ring</li><li class="li-disc">Joined together permanently with high-strength rivets</li><li class="li-disc">At least three times longer service life than other aluminum rear sprockets</li><li class="li-disc">Only half as heavy as conventional steel rear sprockets</li></ul>Another benefit: longer service life for the entire drivetrain<p>Made exclusively for KTM by Supersprox. This product is protected in the EU and the USA by the following patents. EU patent # EP1573234. US patent # 7.481.729. Patent holder Supersprox a.s.</p> dölj mer info

U6951982

Lagerstatus: 1
Pris: 380kr
PowerParts|CNC Parts anodized|Chassis
Brake cylinder cover
DO YOU KNOW that all KTM CNC parts are manufactured from highest quality aluminum and therefore not only look good, they also withstand the toughest treatment? With the anodized aluminum components in the original factory look from the PowerParts range, you can turn your KTM into something very special.
DO YOU KNOW that all KTM CNC parts are manufactured from highest quality aluminum and therefore not only look good, they also withstand the toughest treatment? With the anodized aluminum components in the original factory look from the PowerParts range, you can turn your KTM into something very special. dölj mer info

SXS05450220

Lagerstatus: 2
Pris: 290kr
PowerParts|CNC Parts anodized|Chassis
Clutch reservoir cover
Installation possible with all Magura clutch master cylinders.
Installation possible with all Magura clutch master cylinders. dölj mer info

SXS03540700

Lagerstatus: hos lev.
Pris: 580kr
PowerParts|CNC Parts anodized|Chassis
Factory fuel cap
Aluminium, CNC-machined, without gasket
Aluminium, CNC-machined, without gasket dölj mer info

U6951010

Lagerstatus: 3
Pris: 115kr
PowerParts|CNC Parts anodized|Chassis
Factory fuel cap vent
DO YOU KNOW that all KTM CNC parts are manufactured from highest quality aluminum and therefore not only look good, they also withstand the toughest treatment? With the anodized aluminum components in the original factory look from the PowerParts range, you can turn your KTM into something very special.
DO YOU KNOW that all KTM CNC parts are manufactured from highest quality aluminum and therefore not only look good, they also withstand the toughest treatment? With the anodized aluminum components in the original factory look from the PowerParts range, you can turn your KTM into something very special. dölj mer info

U6951981

Lagerstatus: 8
Pris: 255kr
PowerParts|CNC Parts anodized|Chassis
Footbrake cylinder cover
DO YOU KNOW that all KTM CNC parts are manufactured from highest quality aluminum and therefore not only look good, they also withstand the toughest treatment? With the anodized aluminum components in the original factory look from the PowerParts range, you can turn your KTM into something very special.
DO YOU KNOW that all KTM CNC parts are manufactured from highest quality aluminum and therefore not only look good, they also withstand the toughest treatment? With the anodized aluminum components in the original factory look from the PowerParts range, you can turn your KTM into something very special. dölj mer info

54813960050

Lagerstatus: 4
Pris: 290kr
PowerParts|CNC Parts anodized|Chassis
Footbrake cylinder extender
  • Increases the volume of the foot brake cylinder
  • The additional cooling ribs minimize the heat-up of the brake fluid
  • Eliminates dreaded “fading” almost completely
  • Space requirements: Total height including cover approximately 40.5 mm
<ul><li class="li-square">Increases the volume of the foot brake cylinder</li><li class="li-square">The additional cooling ribs minimize the heat-up of the brake fluid</li><li class="li-square">Eliminates dreaded “fading” almost completely</li><li class="li-square">Space requirements: Total height including cover approximately 40.5 mm</li></ul> dölj mer info

54813951100

Lagerstatus: 1
Pris: 575kr
PowerParts|CNC Parts anodized|Chassis
Footbrake lever step plate
7 mm wider contact surface than standard.
7 mm wider contact surface than standard. dölj mer info

77734931144

Lagerstatus: 1
Pris: 575kr
PowerParts|CNC Parts anodized|Chassis
Gear shift lever step plate
dölj mer info

79430920044

Lagerstatus: 12
Pris: 230kr
PowerParts|CNC Parts anodized|Engine
Oil plug

These high-quality aluminum CNC components feature a superior abrasion-resistant eloxal coating and make a bold visual statement.

<p>These high-quality aluminum CNC components feature a superior abrasion-resistant eloxal coating and make a bold visual statement.</p> dölj mer info

54835980000

Lagerstatus: 15
Pris: 93kr
PowerParts|Cooling|Protection
Foam rubber
dölj mer info

5463503420004

Lagerstatus: 2
Pris: 93kr
PowerParts|Cooling|Protection
Radiator protection
Radiator shield, left
Radiator shield, left dölj mer info

SXS04085500

Lagerstatus: 3
Pris: 2330kr
PowerParts|Exhaust systems|2-Stroke Offroad
Factory expansion chamber
  • Fat torque curve for optimal rideability
  • Minimum weight and maximum performance
  • Made from robust steel
  • Untreated surface for an original factory look
  • Rich, unmistakable sound
  • Recommended in combination with a factory silencer for a perfectly matched full system with optimum performance
<ul><li class="li-square">Fat torque curve for optimal rideability</li><li class="li-square">Minimum weight and maximum performance</li><li class="li-square">Made from robust steel</li><li class="li-square">Untreated surface for an original factory look</li><li class="li-square">Rich, unmistakable sound</li><li class="li-square">Recommended in combination with a factory silencer for a perfectly matched full system with optimum performance</li></ul> dölj mer info

SXS06085550

Lagerstatus: hos lev.
Pris: 1160kr
PowerParts|Exhaust systems|2-Stroke Offroad
Factory silencer
  • Performance boost over the entire rpm range
  • Made from high-grade aluminum
  • Full sound despite low noise level
  • Light weight
  • Perfect fit, easy to install
  • Recommended in combination with a factory pipe for a perfectly matched full system with optimum performance
  • Specially developed for use in Motocross
<ul><li class="li-square">Performance boost over the entire rpm range</li><li class="li-square">Made from high-grade aluminum</li><li class="li-square">Full sound despite low noise level</li><li class="li-square">Light weight</li><li class="li-square">Perfect fit, easy to install</li><li class="li-square">Recommended in combination with a factory pipe for a perfectly matched full system with optimum performance</li><li class="li-square">Specially developed for use in Motocross</li></ul> dölj mer info

SXS12085500

Lagerstatus: 1
Pris: 2285kr
PowerParts|Exhaust systems|2-Stroke Offroad
FMF Fatty expansion chamber
35 years of racing experience: The FMF factory pipes have been specially developed for the hardships of offroad life. That's why they're made from high quality, extra thick, hardwearing sheet steel. An elegant appearance is ensured by the nickel-plated surface. For years and years. Additional features:
  • Broader and more usable rev range
  • Higher top speed
  • More traction, better control when accelerating
  • Nickel-plated surface
  • Including O-rings
For a perfectly tuned and performance-optimized overall system, we recommend combination with an FMF factory silencer.
35 years of racing experience: The FMF factory pipes have been specially developed for the hardships of offroad life. That's why they're made from high quality, extra thick, hardwearing sheet steel. An elegant appearance is ensured by the nickel-plated surface. For years and years. Additional features: <ul><li>Broader and more usable rev range</li><li>Higher top speed</li><li>More traction, better control when accelerating</li><li>Nickel-plated surface</li><li>Including O-rings</li></ul>For a perfectly tuned and performance-optimized overall system, we recommend combination with an FMF factory silencer. dölj mer info

SXS08085550

Lagerstatus: 2
Pris: 1860kr
PowerParts|Exhaust systems|2-Stroke Offroad
FMF Powercore 2 silencer
  • Outer sleeve manufactured from high-grade aluminum
  • Full sound despite low noise level
  • Light weight
  • Perfect fit
  • Easy to install
  • Recommended in combination with a FMF Fatty pipe for a perfectly matched full system with optimum performance
  • Specially developed for use in Motocross
<ul><li class="li-square">Outer sleeve manufactured from high-grade aluminum</li><li class="li-square">Full sound despite low noise level</li><li class="li-square">Light weight</li><li class="li-square">Perfect fit</li><li class="li-square">Easy to install</li><li class="li-square">Recommended in combination with a FMF Fatty pipe for a perfectly matched full system with optimum performance</li><li class="li-square">Specially developed for use in Motocross</li></ul> dölj mer info

54803095000

Lagerstatus: 2
Pris: 82kr
PowerParts|Footrests
Foam rubber
For extremely muddy conditions.
For extremely muddy conditions. dölj mer info

U6951716

Lagerstatus: 38
Pris: 100kr
PowerParts|Handlebar/Instruments/Electric|Grips
Grip donut set
Optimum protection against blisters on the thumbs with these coated neoprene rings. Simple to slide onto the grips.
Optimum protection against blisters on the thumbs with these coated neoprene rings. Simple to slide onto the grips. dölj mer info

54802021100

Lagerstatus: 7
Pris: 195kr
PowerParts|Handlebar/Instruments/Electric|Grips
Grip set
The special half-waffle grip has been developed to meet the demands and preferences of our factory riders, with the clear objectives: comfort AND safety - because no calluses on the palms and secure grip mean less stress when riding.
The benefits:
  • Ergonomic; contour matched to the shape of the hand for maximum comfort
  • Small "half waffle" ribs on the rear for secure grip
  • Made from two materials with different grades of hardness
  • Available in two versions (soft and medium)
  • Three areas for the metal safety wire
The special half-waffle grip has been developed to meet the demands and preferences of our factory riders, with the clear objectives: comfort AND safety - because no calluses on the palms and secure grip mean less stress when riding.<br />The benefits:<ul><li class="li-disc"> Ergonomic; contour matched to the shape of the hand for maximum comfort</li><li class="li-disc"> Small "half waffle" ribs on the rear for secure grip</li><li class="li-disc"> Made from two materials with different grades of hardness</li><li class="li-disc"> Available in two versions (soft and medium)</li><li class="li-disc"> Three areas for the metal safety wire</li></ul> dölj mer info

54802021000

Lagerstatus: 9
Pris: 210kr
PowerParts|Handlebar/Instruments/Electric|Grips
Grip set
The special half-waffle grip has been developed to meet the demands and preferences of our factory riders, with the clear objectives: comfort AND safety - because no calluses on the palms and secure grip mean less stress when riding.
The benefits:
  • Ergonomic; contour matched to the shape of the hand for maximum comfort
  • Small "half waffle" ribs on the rear for secure grip
  • Made from two materials with different grades of hardness
  • Available in two versions (soft and medium)
  • Three areas for the metal safety wire
The special half-waffle grip has been developed to meet the demands and preferences of our factory riders, with the clear objectives: comfort AND safety - because no calluses on the palms and secure grip mean less stress when riding.<br />The benefits:<ul><li class="li-disc"> Ergonomic; contour matched to the shape of the hand for maximum comfort</li><li class="li-disc"> Small "half waffle" ribs on the rear for secure grip</li><li class="li-disc"> Made from two materials with different grades of hardness</li><li class="li-disc"> Available in two versions (soft and medium)</li><li class="li-disc"> Three areas for the metal safety wire</li></ul> dölj mer info

63002021200

Lagerstatus: 13
Pris: 290kr
PowerParts|Handlebar/Instruments/Electric|Grips
Grip set
The KTM 2K (2K= 2 different materials) grip combines the durability of KTM standard grips and the comfort of the soft KTM grips.
  • Harder orange material on the inside and at the grip ends for a long service life
  • Softer black material on the outside, where the hand lies on the grip, for increased comfort
  • With open grip ends for closed handguards or bar ends
The KTM 2K (2K= 2 different materials) grip combines the durability of KTM standard grips and the comfort of the soft KTM grips.<ul><li class="li-disc">Harder orange material on the inside and at the grip ends for a long service life</li><li class="li-disc">Softer black material on the outside, where the hand lies on the grip, for increased comfort</li><li class="li-disc">With open grip ends for closed handguards or bar ends</li></ul> dölj mer info

63002021100

Lagerstatus: 9
Pris: 250kr
PowerParts|Handlebar/Instruments/Electric|Grips
Grip set
The KTM 2K (2K= 2 different materials) grip combines the durability of KTM standard grips and the comfort of the soft KTM grips.
  • Harder orange material on the inside and at the grip ends for a long service life
  • Softer black material on the outside, where the hand lies on the grip, for increased comfort
The KTM 2K (2K= 2 different materials) grip combines the durability of KTM standard grips and the comfort of the soft KTM grips.<ul><li class="li-disc">Harder orange material on the inside and at the grip ends for a long service life</li><li class="li-disc">Softer black material on the outside, where the hand lies on the grip, for increased comfort</li></ul> dölj mer info

78102924000

Lagerstatus: 8
Pris: 340kr
PowerParts|Handlebar/Instruments/Electric|Grips
Lock-on grip set
  • Grip replacement made easy
  • Right grip permanently glued to the throttle grip
  • Left grip with aluminum clamping ring for fixing on the handlebar
  • Inconvenient gluing and securing with wire no longer necessary
<ul><li class="li-square">Grip replacement made easy</li><li class="li-square">Right grip permanently glued to the throttle grip</li><li class="li-square">Left grip with aluminum clamping ring for fixing on the handlebar</li><li class="li-square">Inconvenient gluing and securing with wire no longer necessary</li></ul> dölj mer info

78102922000

Lagerstatus: 2
Pris: 160kr
PowerParts|Handlebar/Instruments/Electric|Grips
Mud grips
The mud grips are simply pulled over existing grips and guarantee a secure hold on the grip rubber, even in extremely muddy conditions, thanks to their special material mix.
The mud grips are simply pulled over existing grips and guarantee a secure hold on the grip rubber, even in extremely muddy conditions, thanks to their special material mix. dölj mer info

55102925000

Lagerstatus: 10+
Pris: 1860kr
PowerParts|Handlebar/Instruments/Electric|Grips
Throttle twist grip
The throttle twist grip has three differently profiled cams, each with a different gear ratio. This allows the throttle response characteristics to be varied in accordance with personal requirements.
The throttle twist grip has three differently profiled cams, each with a different gear ratio. This allows the throttle response characteristics to be varied in accordance with personal requirements. dölj mer info

7770297900028

Lagerstatus: hos lev.
Pris: 525kr
PowerParts|Handlebar/Instruments/Electric|Handguards
Handguard kit
Thanks to splitting of the surfaces, these open, very light MX handguards ensure an uncompromising racing look. In two-component injection moulding technology:
  • Black mid-section = maximum strength for optimum protection
  • Coloured top and bottom parts = highly flexible, enduring even the roughest of treatment
Mounted directly on the handlebar with a plastic bracket.
Thanks to splitting of the surfaces, these open, very light MX handguards ensure an uncompromising racing look. In two-component injection moulding technology:<ul><li class="li-disc">Black mid-section = maximum strength for optimum protection</li><li class="li-disc">Coloured top and bottom parts = highly flexible, enduring even the roughest of treatment</li></ul>Mounted directly on the handlebar with a plastic bracket. dölj mer info

7770297900004

Lagerstatus: hos lev.
Pris: 525kr
PowerParts|Handlebar/Instruments/Electric|Handguards
Handguard kit
Thanks to splitting of the surfaces, these open, very light KTM MX handguards ensure an uncompromising racing look in the angular KTM design. In two-component injection moulding technology:
  • Black mid-section = maximum strength for optimum protection
  • Coloured top and bottom parts = highly flexible, enduring even the roughest of treatment
Mounted directly on the handlebar with a plastic bracket.
Thanks to splitting of the surfaces, these open, very light KTM MX handguards ensure an uncompromising racing look in the angular KTM design. In two-component injection moulding technology: <ul><li class="li-disc"> Black mid-section = maximum strength for optimum protection</li><li class="li-disc"> Coloured top and bottom parts = highly flexible, enduring even the roughest of treatment</li></ul>Mounted directly on the handlebar with a plastic bracket. dölj mer info

7810297910004

Lagerstatus: 1
Pris: 525kr
PowerParts|Handlebar/Instruments/Electric|Handguards
Handguard kit
Thanks to splitting of the surfaces, these open, very light KTM MX handguards ensure an uncompromising racing look in the angular KTM design. In two-component injection moulding technology:
  • Black mid-section = maximum strength for optimum protection
  • Coloured top and bottom parts = highly flexible, enduring even the roughest of treatment
  • Attached directly at the levers with a special mounting.
Thanks to splitting of the surfaces, these open, very light KTM MX handguards ensure an uncompromising racing look in the angular KTM design. In two-component injection moulding technology: <ul><li class="li-disc"> Black mid-section = maximum strength for optimum protection</li><li class="li-disc"> Coloured top and bottom parts = highly flexible, enduring even the roughest of treatment</li><li class="li-disc">Attached directly at the levers with a special mounting.</li></ul> dölj mer info

7810297910028

Lagerstatus: hos lev.
Pris: 525kr
PowerParts|Handlebar/Instruments/Electric|Handguards
Handguard kit
Thanks to splitting of the surfaces, these open, very light KTM MX handguards ensure an uncompromising racing look in the angular KTM design. In two-component injection moulding technology:
  • Black mid-section = maximum strength for optimum protection
  • Coloured top and bottom parts = highly flexible, enduring even the roughest of treatment
  • Attached directly at the levers with a special mounting.
Thanks to splitting of the surfaces, these open, very light KTM MX handguards ensure an uncompromising racing look in the angular KTM design. In two-component injection moulding technology: <ul><li class="li-disc"> Black mid-section = maximum strength for optimum protection</li><li class="li-disc"> Coloured top and bottom parts = highly flexible, enduring even the roughest of treatment</li><li class="li-disc">Attached directly at the levers with a special mounting.</li></ul> dölj mer info

5480200130004

Lagerstatus: 1
Pris: 1160kr
PowerParts|Handlebar/Instruments/Electric|Handlebar
Handlebar
DO YOU KNOW that KTM handlebars must withstand very elaborate and specially developed test cycles before they come to market?
The facts:
  • All KTM handlebars are made from EN AW 7010 T6 aluminum
  • 28.5 mm diameter in the clamping area
  • 22.15 mm diameter in the lever area
  • Position markings for simple setting
  • Dimensions: A = 115 mm, B = 806 mm, C = 62 mm
DO YOU KNOW that KTM handlebars must withstand very elaborate and specially developed test cycles before they come to market?<br />The facts:<ul><li class="li-disc">All KTM handlebars are made from EN AW 7010 T6 aluminum</li><li class="li-disc">28.5 mm diameter in the clamping area</li><li class="li-disc">22.15 mm diameter in the lever area</li><li class="li-disc">Position markings for simple setting</li><li class="li-disc">Dimensions: A = 115 mm, B = 806 mm, C = 62 mm</li></ul> dölj mer info

U6950997

Lagerstatus: hos lev.
Pris: 1510kr
PowerParts|Handlebar/Instruments/Electric|Handlebar
Renthal handlebar
DO YOU KNOW that KTM handlebars must withstand very extensive and specially developed test cycles before they come to market?
The facts:
  • All KTM handlebars are made from EN AW 7010 T6 aluminum
  • Position markings for simple setting
  • Including bar pad
DO YOU KNOW that KTM handlebars must withstand very extensive and specially developed test cycles before they come to market? <br />The facts:<ul><li class="li-disc"> All KTM handlebars are made from EN AW 7010 T6 aluminum</li><li class="li-disc"> Position markings for simple setting</li><li class="li-disc"> Including bar pad</li></ul> dölj mer info

54801043020

Lagerstatus: 2
Pris: 340kr
PowerParts|Handlebar/Instruments/Electric|Handlebar support
Handlebar riser
Can only be fitted in combination with handlebar support 59001039100 (standard on EXC models up to MY 2011).
20 mm
Can only be fitted in combination with handlebar support 59001039100 (standard on EXC models up to MY 2011).<br />20 mm dölj mer info

54801043012

Lagerstatus: 2
Pris: 340kr
PowerParts|Handlebar/Instruments/Electric|Handlebar support
Handlebar riser
Can only be fitted in combination with handlebar support 59001039100 (standard on EXC models up to MY 2011).
12 mm
Can only be fitted in combination with handlebar support 59001039100 (standard on EXC models up to MY 2011).<br />12 mm dölj mer info

78112920000

Lagerstatus: 3
Pris: 760kr
PowerParts|Handlebar/Instruments/Electric|Instruments/Electric
Hourmeter
Know exactly when the next service is due.
Know exactly when the next service is due. dölj mer info

78112920044

Lagerstatus: hos lev.
Pris: 150kr
PowerParts|Handlebar/Instruments/Electric|Instruments/Electric
Hourmeter bracket
To assemble the hourmeter 78112920000 on the triple clamp.
To assemble the hourmeter 78112920000 on the triple clamp. dölj mer info

SXS12450644

Lagerstatus: hos lev.
Pris: 125kr
PowerParts|Handlebar/Instruments/Electric|Instruments/Electric
Hourmeter bracket
For fitting hourmeter SXS.12.450.600.
For fitting hourmeter SXS.12.450.600. dölj mer info

7800293100004

Lagerstatus: 2
Pris: 255kr
PowerParts|Handlebar/Instruments/Electric|Lever
Clutch lever
DO YOU KNOW about the benefits of forged brake and clutch levers from KTM PowerParts?
  • Manufactured from high-strength aluminum, forged and then CNC-machined
  • This extensive production process guarantees a long service life, maximum flexibility and a precise fit
  • Ergonomically perfected shape (the result of years of racing experience)
  • Predefined breaking point
  • Orange anodized
Suitable for all hydraulic Magura clutch mountings up to model year 2008.
DO YOU KNOW about the benefits of forged brake and clutch levers from KTM PowerParts?<ul><li class="li-disc"> Manufactured from high-strength aluminum, forged and then CNC-machined </li><li class="li-disc"> This extensive production process guarantees a long service life, maximum flexibility and a precise fit</li><li class="li-disc"> Ergonomically perfected shape (the result of years of racing experience)</li><li class="li-disc"> Predefined breaking point</li><li class="li-disc"> Orange anodized</li></ul>Suitable for all hydraulic Magura clutch mountings up to model year 2008. dölj mer info

4621380200004

Lagerstatus: hos lev.
Pris: 1160kr
PowerParts|Handlebar/Instruments/Electric|Lever
Flex brake lever
Ever had to give up during the race because of a broken clutch or brake lever? That will never happen again - these levers are designed to fold away on contact with the ground.
Ever had to give up during the race because of a broken clutch or brake lever? That will never happen again - these levers are designed to fold away on contact with the ground. dölj mer info

4620283100004

Lagerstatus: hos lev.
Pris: 1160kr
PowerParts|Handlebar/Instruments/Electric|Lever
Flex clutch lever
Ever had to give up during the race because of a broken clutch or brake lever? That will never happen again - these levers are designed to fold away on contact with the ground.
Ever had to give up during the race because of a broken clutch or brake lever? That will never happen again - these levers are designed to fold away on contact with the ground. dölj mer info

54802005000

Lagerstatus: 8
Pris: 175kr
PowerParts|Handlebar/Instruments/Electric|Special parts
Handlebar ends
Protects rubber grips from grazing in the event of a fall.
Protects rubber grips from grazing in the event of a fall. dölj mer info

77202002144

Lagerstatus: 11
Pris: 255kr
PowerParts|Handlebar/Instruments/Electric|Special parts
Handlebar pad
Provides optimum protection. Already a must at many events.
Provides optimum protection. Already a must at many events. dölj mer info

00062030051

Lagerstatus: 9
Pris: 120kr
PowerParts|Oil/chemicals
Grip glue
Perfect hold for your grips. Contents: 20 g.
Perfect hold for your grips. Contents: 20 g. dölj mer info

00062030058

Lagerstatus: 6
Pris: 87kr
PowerParts|Oil/chemicals
Repair kit
The repair kit is a two-component epoxy resin adhesive. Hardens at room temperature: accelerated hardening possible by raising the temperature.
Use: Particularly suitable for steel, but also other metals, wood, concrete, ceramics, glass and most plastics. The steel bond is resistant to, among other things, oil, gasoline, diesel and battery acid.
Processing: Best results are achieved with clean and rough surfaces. Cut off the required amount and knead for approx. 1 minute until a uniform color is achieved. Use within 2 minutes.
At first, it seems as if there is no adhesion. Just carry on and press the adhesive mixture into the surface. Remove any excess material. When coating or repairing surfaces that are still wet, leak or are under water, apply pressure until adhesion begins. Smooth flat with water by hand for an even surface. Wash your hands with soap and water (or with a Turbo cleaning towelette) immediately after completing your work. Hardening commences after 5 to 10 minutes. The repaired part can be used again after as little as 60 minutes. The surfaces to be glued must be dry and free from dust and grease. Contents: 56 g.
The repair kit is a two-component epoxy resin adhesive. Hardens at room temperature: accelerated hardening possible by raising the temperature. <br />Use: Particularly suitable for steel, but also other metals, wood, concrete, ceramics, glass and most plastics. The steel bond is resistant to, among other things, oil, gasoline, diesel and battery acid. <br />Processing: Best results are achieved with clean and rough surfaces. Cut off the required amount and knead for approx. 1 minute until a uniform color is achieved. Use within 2 minutes.<br />At first, it seems as if there is no adhesion. Just carry on and press the adhesive mixture into the surface. Remove any excess material. When coating or repairing surfaces that are still wet, leak or are under water, apply pressure until adhesion begins. Smooth flat with water by hand for an even surface. Wash your hands with soap and water (or with a Turbo cleaning towelette) immediately after completing your work. Hardening commences after 5 to 10 minutes. The repaired part can be used again after as little as 60 minutes. The surfaces to be glued must be dry and free from dust and grease. Contents: 56 g. dölj mer info

00062030050

Lagerstatus: 1
Pris: 380kr
PowerParts|Oil/chemicals
Thread lock
De-grease and clean parts with KTM power cleaner before use; contents, 50 ml.
De-grease and clean parts with KTM power cleaner before use; contents, 50 ml. dölj mer info

00062030059

Lagerstatus: hos lev.
Pris: 295kr
PowerParts|Oil/chemicals
Turbo Wipes
Always to hand, practical and highly effective! Turbo Wipes remove unhardened sealant and polyurethane foam, oil, most adhesives, paints and lubricants from hands, tools and surfaces.
Always to hand, practical and highly effective! Turbo Wipes remove unhardened sealant and polyurethane foam, oil, most adhesives, paints and lubricants from hands, tools and surfaces. dölj mer info

47003090100

Lagerstatus: 2
Pris: 875kr
PowerParts|Protection|Engine Protection 2-Stroke
Skid Plate
An offroad sortie is no walk in the park! KTM aluminum skid plates provide the most effective protection for frame and engine:
  • Made from 4mm-thick, high-strength, robust aluminum
  • Extremely hard-wearing and endurance-tested for the toughest offroad use
  • Precisely fitting design - specially developed for KTM models
  • Highest quality workmanship
  • Quick and simple installation
An offroad sortie is no walk in the park! KTM aluminum skid plates provide the most effective protection for frame and engine:<ul><li class="li-disc"> Made from 4mm-thick, high-strength, robust aluminum</li><li class="li-disc"> Extremely hard-wearing and endurance-tested for the toughest offroad use</li><li class="li-disc"> Precisely fitting design - specially developed for KTM models</li><li class="li-disc"> Highest quality workmanship</li><li class="li-disc"> Quick and simple installation</li></ul> dölj mer info

47201996000

Lagerstatus: 1
Pris: 1040kr
PowerParts|Suspension/Triple clamp
Factory start device
This is how the factory riders start! The factory start is mounted directly on the fork. Before the start, the fork is dipped and fixed in the desired position to shift the center of gravity forwards. This to a large extent prevents the front wheel from lifting at the start, thus providing greater traction and perhaps securing you the odd holeshot or two. The first time the fork dips, the fixing is slackened and the fork released automatically.
This is how the factory riders start! The factory start is mounted directly on the fork. Before the start, the fork is dipped and fixed in the desired position to shift the center of gravity forwards. This to a large extent prevents the front wheel from lifting at the start, thus providing greater traction and perhaps securing you the odd holeshot or two. The first time the fork dips, the fixing is slackened and the fork released automatically. dölj mer info

4700109902004

Lagerstatus: hos lev.
Pris: 5195kr
PowerParts|Suspension/Triple clamp
Factory triple clamp
  • Made from high-grade aluminum
  • Optimally tuned steering stem stiffness
  • 100% alignment of the fork tubes
  • Perfect flexibility – adapted precisely to the WP fork
  • With longer offset (20 mm): easy quick cornering in curves
  • Including steering stem with steering head bearing already pressed on
<ul><li class="li-square">Made from high-grade aluminum</li><li class="li-square">Optimally tuned steering stem stiffness</li><li class="li-square">100% alignment of the fork tubes</li><li class="li-square">Perfect flexibility – adapted precisely to the WP fork</li><li class="li-square">With longer offset (20 mm): easy quick cornering in curves</li><li class="li-square">Including steering stem with steering head bearing already pressed on</li></ul> dölj mer info

4710199901404

Lagerstatus: hos lev.
Pris: 5195kr
PowerParts|Suspension/Triple clamp
Factory triple clamp
  • Made from high-grade aluminum
  • Optimally tuned steering stem stiffness
  • 100% alignment of the fork tubes
  • Perfect flexibility – adapted precisely to the WP fork
  • Including steering stem with steering head bearing already pressed on
<ul><li class="li-square">Made from high-grade aluminum</li><li class="li-square">Optimally tuned steering stem stiffness</li><li class="li-square">100% alignment of the fork tubes</li><li class="li-square">Perfect flexibility – adapted precisely to the WP fork</li><li class="li-square">Including steering stem with steering head bearing already pressed on</li></ul> dölj mer info

7723199700004

Lagerstatus: 4
Pris: 255kr
PowerParts|Tanks
Vent hose
Fuel-proof for tank and carburetor venting, approx. 3 m. Should only be used for venting purposes and not as a connection between tank and carburetor.
Fuel-proof for tank and carburetor venting, approx. 3 m. Should only be used for venting purposes and not as a connection between tank and carburetor. dölj mer info

78029155000

Lagerstatus: 1
Pris: 1040kr
PowerParts|Tools/Transportation|Stands
Bike stand
High quality plastic stand designed especially for KTM offroad bikes. Special features:
  • Two different heights possible
  • Can be used as a stand for the quickfill system
  • Storage space for the front and rear axle when removing the wheels
  • Attachments for the following parts: mud removal tool, exhaust plug, magnetic bolt pan and various tools
High quality plastic stand designed especially for KTM offroad bikes. Special features: <ul><li class="li-disc"> Two different heights possible</li><li class="li-disc"> Can be used as a stand for the quickfill system</li><li class="li-disc"> Storage space for the front and rear axle when removing the wheels</li><li class="li-disc"> Attachments for the following parts: mud removal tool, exhaust plug, magnetic bolt pan and various tools</li></ul> dölj mer info

78929955100

Lagerstatus: 2
Pris: 760kr
PowerParts|Tools/Transportation|Stands
Lift stand

Tool for lifting the motorcycle.

Stroke: 260/370 mm
Maximum load:  150 kg

<p>Tool for lifting the motorcycle.</p><p>Stroke: 260/370 mm<br />Maximum load:  150 kg</p> dölj mer info

47003020000

Lagerstatus: 2
Pris: 175kr
PowerParts|Tools/Transportation|Stands
Plug-in stand
dölj mer info

59006098000

Lagerstatus: 1
Pris: 150kr
PowerParts|Tools/Transportation|Tools
Air filter cover
Highly recommended! Protects the intake tract from water and dirt when cleaning the air filter box.
Highly recommended! Protects the intake tract from water and dirt when cleaning the air filter box. dölj mer info

58429074000

Lagerstatus: 1
Pris: 2005kr
PowerParts|Tools/Transportation|Tools
Battery charging and testing unit
A must for every workshop/garage. Testing, charging and keeping batteries fresh made easy. Fully automatic and economical battery charging by means of programmed charge characteristic.
Clear LC display shows charging level. Reverse polarity protection, short-circuit protection, overload protection.
Adapter for UK : 584.29.074.001, Adapter for AUS: 584.29.074.002
CAUTION: The battery charger must not be connected to lithium-ion batteries for longer than 24h, lithium-ion batteries are also not suitable for trickle charging.
A must for every workshop/garage. Testing, charging and keeping batteries fresh made easy. Fully automatic and economical battery charging by means of programmed charge characteristic.<br />Clear LC display shows charging level. Reverse polarity protection, short-circuit protection, overload protection.<br />Adapter for UK : 584.29.074.001, Adapter for AUS: 584.29.074.002<br />CAUTION: The battery charger must not be connected to lithium-ion batteries for longer than 24h, lithium-ion batteries are also not suitable for trickle charging. dölj mer info

00029901000

Lagerstatus: 2
Pris: 290kr
PowerParts|Tools/Transportation|Tools
Bead buddy
The Bead Buddy acts as your third hand when fitting tires. Holds the tire in the tire bed, thereby making tire fitting much easier. Simply hook it into the spokes and away you go. Particularly recommended for tire fitting with mousse.
The Bead Buddy acts as your third hand when fitting tires. Holds the tire in the tire bed, thereby making tire fitting much easier. Simply hook it into the spokes and away you go. Particularly recommended for tire fitting with mousse. dölj mer info

00029940000

Lagerstatus: 1
Pris: 350kr
PowerParts|Tools/Transportation|Tools
Cable ring
  • Easy handling and operation
  • More safety
  • Less wear on the cord
  • Made of high quality material
  • Cable not included
<ul><li class="li-disc">Easy handling and operation</li><li class="li-disc">More safety</li><li class="li-disc">Less wear on the cord</li><li class="li-disc">Made of high quality material</li><li class="li-disc">Cable not included</li></ul> dölj mer info

U6951130

Lagerstatus: 7
Pris: 115kr
PowerParts|Tools/Transportation|Tools
Cable tie
100x, length:20 cm.
100x, length:20 cm. dölj mer info

59029041100

Lagerstatus: 6
Pris: 115kr
PowerParts|Tools/Transportation|Tools
Feeler gauge
Tool for checking and measuring installed gaps
Tool for checking and measuring installed gaps dölj mer info

59029041000

Lagerstatus: 1
Pris: 105kr
PowerParts|Tools/Transportation|Tools
Feeler gauge
0.10 mm; 0.12 mm; 0.15 mm; 0.20 mm; 0.25 mm
0.10 mm; 0.12 mm; 0.15 mm; 0.20 mm; 0.25 mm dölj mer info

77312030000

Lagerstatus: 1
Pris: 645kr
PowerParts|Tools/Transportation|Tools
Foot pump
Small and light, so very portable - saves the day in the event of a puncture on the move! Mini-footpump with pressure gauge on the swiveling valve head that fits all prevalent valves. Integrated double-cylinder with pressure switch-over to high pressure. Maximum 12 bar. Height: approx. 170 mm folded together.
Small and light, so very portable - saves the day in the event of a puncture on the move! Mini-footpump with pressure gauge on the swiveling valve head that fits all prevalent valves. Integrated double-cylinder with pressure switch-over to high pressure. Maximum 12 bar. Height: approx. 170 mm folded together. dölj mer info

59029050000

Lagerstatus: 2
Pris: 115kr
PowerParts|Tools/Transportation|Tools
Funnel
Funnel specially developed for KTM motorcycles. Diameter (small and large) optimized to suit the filler neck; special groove for optimum ventilation.
Funnel specially developed for KTM motorcycles. Diameter (small and large) optimized to suit the filler neck; special groove for optimum ventilation. dölj mer info

60412002000

Lagerstatus: 4
Pris: 175kr
PowerParts|Tools/Transportation|Tools
KTM Första hjälpen kit
KTM Första hjälpen kit
KTM Första hjälpen kit dölj mer info

78029063000

Lagerstatus: 5
Pris: 115kr
PowerParts|Tools/Transportation|Tools
Measuring cup
With scaling for both the fluid level and different mixture ratios. Perfect for changing the oil and for preparing larger quantities of 2-stroke mixture in the canister. Simple handling thanks to the ergonomic design.
With scaling for both the fluid level and different mixture ratios. Perfect for changing the oil and for preparing larger quantities of 2-stroke mixture in the canister. Simple handling thanks to the ergonomic design. dölj mer info

54829035000

Lagerstatus: 5
Pris: 100kr
PowerParts|Tools/Transportation|Tools
Mud removal tool
Use this to remove the dirt from your last mud battle with ease! A motorcycle grip rubber (not included) can be fitted to the grip.
Use this to remove the dirt from your last mud battle with ease! A motorcycle grip rubber (not included) can be fitted to the grip. dölj mer info

00029997000

Lagerstatus: 1
Pris: 815kr
PowerParts|Tools/Transportation|Tools
Multi-purpose tool
The perfect alternative tool on the go. Conveniently packaged in a small bag you can use the tool for following fittings: 14, 12, 10, 8 mm hexagon sockets; 6, 8, 13 mm socket wrench; Inserts for slotted and Phillips screw heads, 5 mm / 6 mm Allen keys, 25/30 and 40/45 Torx; bottle opener; Option for attaching for 3/8 "and 1/4" socket wrench.
The perfect alternative tool on the go. Conveniently packaged in a small bag you can use the tool for following fittings: 14, 12, 10, 8 mm hexagon sockets; 6, 8, 13 mm socket wrench; Inserts for slotted and Phillips screw heads, 5 mm / 6 mm Allen keys, 25/30 and 40/45 Torx; bottle opener; Option for attaching for 3/8 "and 1/4" socket wrench. dölj mer info

7802906500004

Lagerstatus: 3
Pris: 115kr
PowerParts|Tools/Transportation|Tools
Oil bottle
Perfect for all 2-stroke riders on the move. The small bottle fits in your tool bag or jacket. Capacity 250 ml, with scaling for different mixture ratios (1 : 40 / 2.5 %; 1 : 50 / 2 %; 1 : 60 / 1.7 %; 1 : 80 / 1.25 %)
Perfect for all 2-stroke riders on the move. The small bottle fits in your tool bag or jacket. Capacity 250 ml, with scaling for different mixture ratios (1 : 40 / 2.5 %; 1 : 50 / 2 %; 1 : 60 / 1.7 %; 1 : 80 / 1.25 %) dölj mer info

59512030200

Lagerstatus: 6
Pris: 82kr
PowerParts|Tools/Transportation|Tools
Plug
Keeps water out of the silencer during cleaning. For internal diameters 37 mm – 62 mm.
Keeps water out of the silencer during cleaning. For internal diameters 37 mm – 62 mm. dölj mer info

54812016000

Lagerstatus: 1
Pris: 410kr
PowerParts|Tools/Transportation|Tools
Safety wire
200 m Wire with 0.61 mm diameter.
200 m Wire with 0.61 mm diameter. dölj mer info

00029090100

Lagerstatus: 2
Pris: 645kr
PowerParts|Tools/Transportation|Tools
Sag scale
Makes setting the sag significantly simpler. Folding version for easy stowing in the tool box.
Makes setting the sag significantly simpler. Folding version for easy stowing in the tool box. dölj mer info

7802996200030

Lagerstatus: 2
Pris: 175kr
PowerParts|Tools/Transportation|Tools
Screw pan
Magnetic. Never lose a bolt again!
Perfect for use in combination with the SX stand.
Magnetic. Never lose a bolt again!<br />Perfect for use in combination with the SX stand. dölj mer info

00029999200

Lagerstatus: hos lev.
Pris: 1160kr
PowerParts|Tools/Transportation|Tools
Screw selection
Contains all the most-used bolts and small parts for current SX and EXC models. 30 % saving compared with purchasing individual parts.
Contains all the most-used bolts and small parts for current SX and EXC models. 30 % saving compared with purchasing individual parts. dölj mer info

00029098200

Lagerstatus: 3
Pris: 255kr
PowerParts|Tools/Transportation|Tools
Screwdriver kit
High quality, 5-piece screwdriver set in the KTM design.
High quality, 5-piece screwdriver set in the KTM design. dölj mer info

7802906400004

Lagerstatus: 2
Pris: 58kr
PowerParts|Tools/Transportation|Tools
Spark plug box
With space for storing fuses.
With space for storing fuses. dölj mer info

77212991100

Lagerstatus: 10
Pris: 175kr
PowerParts|Tools/Transportation|Tools
Spoke wrench
6 mm and 7 mm
6 mm and 7 mm dölj mer info

5030501700004

Lagerstatus: 6
Pris: 150kr
PowerParts|Tools/Transportation|Tools
Spring hook
Simple spring removal.
Simple spring removal. dölj mer info

58312078000

Lagerstatus: 2
Pris: 175kr
PowerParts|Tools/Transportation|Tools
Tool bag

The optimum solution for always having the most important tools to hand when on the road.

<p>The optimum solution for always having the most important tools to hand when on the road.</p> dölj mer info

00029098400

Lagerstatus: 2
Pris: 1860kr
PowerParts|Tools/Transportation|Tools
Toolbox
60-piece, 3/8" toolbox in orange with high-quality, chrome-vanadium tools.
Volume:
  • Ratchet (with locking device), lever, two extensions and socket wrench
  • Hexagon sockets from 6 to 24
  • Allen keys from 3 to 10
  • Phillips and slotted bits
  • Torx bits from 15 to 55
With this, small jobs on your KTM can be completed quickly and reliably. Whether you're removing fairings or changing the oil, you'll definitely find the right tool here.
60-piece, 3/8" toolbox in orange with high-quality, chrome-vanadium tools.<br />Volume:<ul><li class="li-disc"> Ratchet (with locking device), lever, two extensions and socket wrench</li><li class="li-disc"> Hexagon sockets from 6 to 24</li><li class="li-disc"> Allen keys from 3 to 10</li><li class="li-disc"> Phillips and slotted bits</li><li class="li-disc"> Torx bits from 15 to 55 </li></ul>With this, small jobs on your KTM can be completed quickly and reliably. Whether you're removing fairings or changing the oil, you'll definitely find the right tool here. dölj mer info

00029098300

Lagerstatus: hos lev.
Pris: 805kr
PowerParts|Tools/Transportation|Tools
Toolbox
38-piece, 1/4" toolbox in orange with high-quality, chrome-vanadium tools.
Volume:
  • Ratchet (with locking device), lever, two extensions and socket wrench
  • Hexagon sockets from 4 to 14
  • Allen keys from 3 to 8
  • Phillips, slotted and Torx bits
With this, small jobs on your KTM can be completed quickly and reliably. Whether you're removing fairings or changing the oil, you'll definitely find the right tool here.
38-piece, 1/4" toolbox in orange with high-quality, chrome-vanadium tools.<br />Volume:<ul><li class="li-disc"> Ratchet (with locking device), lever, two extensions and socket wrench</li><li class="li-disc"> Hexagon sockets from 4 to 14</li><li class="li-disc"> Allen keys from 3 to 8</li><li class="li-disc"> Phillips, slotted and Torx bits</li></ul>With this, small jobs on your KTM can be completed quickly and reliably. Whether you're removing fairings or changing the oil, you'll definitely find the right tool here. dölj mer info

00029996000

Lagerstatus: 1
Pris: 2685kr
PowerParts|Tools/Transportation|Tools
Torque wrench

High-quality, adjustable torque wrench 2-25 NM, including the following accessories:

  • Push-on spoke wrenches in sizes 5.65 and 6.95 mm
  • Push-on ratchet ¼“
  • Ratchet attachments:  8, 10, 13 mm socket wrench, 15 Torx
<p>High-quality, adjustable torque wrench 2-25 NM, including the following accessories:</p><ul><li class="li-disc">Push-on spoke wrenches in sizes 5.65 and 6.95 mm</li><li class="li-disc">Push-on ratchet ¼“</li><li class="li-disc">Ratchet attachments:  8, 10, 13 mm socket wrench, 15 Torx</li></ul> dölj mer info

51012092000

Lagerstatus: 6
Pris: 150kr
PowerParts|Tools/Transportation|Tools
Tyre lever
There's racing experience here as well! Practical tire iron - short version ideal for the portable tool bag.
There's racing experience here as well! Practical tire iron - short version ideal for the portable tool bag. dölj mer info

51012093000

Lagerstatus: 3
Pris: 175kr
PowerParts|Tools/Transportation|Tools
Tyre lever
There's racing experience here as well! Practical tire iron - long version for minimum effort.
There's racing experience here as well! Practical tire iron - long version for minimum effort. dölj mer info

78129984000

Lagerstatus: hos lev.
Pris: 1160kr
PowerParts|Tools/Transportation|Tools
Tyre lever kit
Made of high strength, orange anodized aluminum; not suitable for tire mounting with mousse. With integrated ring wrench SW 32, 27, 17, 13 and 10 mm.
Made of high strength, orange anodized aluminum; not suitable for tire mounting with mousse. With integrated ring wrench SW 32, 27, 17, 13 and 10 mm. dölj mer info

54829068000

Lagerstatus: 2
Pris: 340kr
PowerParts|Tools/Transportation|Tools
Tyre pressure gauge
Easy to use! Measuring range 0 bar – 4 bar. Clamping head rotatable through 90° on a flexible stainless steel feed line. The valve shaft is therefore accessed easily and quickly. Very accurate measurements by way of a durable internal membrane. Internal pressure is reduced after use by a relief valve (push button).
Easy to use! Measuring range 0 bar – 4 bar. Clamping head rotatable through 90° on a flexible stainless steel feed line. The valve shaft is therefore accessed easily and quickly. Very accurate measurements by way of a durable internal membrane. Internal pressure is reduced after use by a relief valve (push button). dölj mer info

77329068000

Lagerstatus: 2
Pris: 455kr
PowerParts|Tools/Transportation|Tools
Tyre pressure gauge
Comfortable and easy to use. Fits all standard valves. Pressure display in bar or psi. Integrated pressure release valve for accurate pressure adjustment. Disengageable display and work area lighting. Energy-saving function with automatic cut-off. Maximum measuring pressure: 11 bar.
Comfortable and easy to use. Fits all standard valves. Pressure display in bar or psi. Integrated pressure release valve for accurate pressure adjustment. Disengageable display and work area lighting. Energy-saving function with automatic cut-off. Maximum measuring pressure: 11 bar. dölj mer info

58310025000

Lagerstatus: hos lev.
Pris: 410kr
PowerParts|Tools/Transportation|Tools
Wheel alignment gauge
The ideal tool for checking perfect wheel position when tensioning the chain.
The ideal tool for checking perfect wheel position when tensioning the chain. dölj mer info

00029015000

Lagerstatus: hos lev.
Pris: 575kr
PowerParts|Tools/Transportation|Tools
Wire pliers
Recommended, very practical, high quality tool to help you twist safety wire 548.12.016.000 like a professional.
Recommended, very practical, high quality tool to help you twist safety wire 548.12.016.000 like a professional. dölj mer info

U6951277

Lagerstatus: hos lev.
Pris: 2330kr
PowerParts|Tools/Transportation|Transportation
Bike ramp
High quality, folding aluminum ramp with straps for secure attachment on loading. Weighing in at 5.5 kg, it withstands a load of 180 kg. The total length is approx.200 cm, folded approx.100 cm.
High quality, folding aluminum ramp with straps for secure attachment on loading. Weighing in at 5.5 kg, it withstands a load of 180 kg. The total length is approx.200 cm, folded approx.100 cm. dölj mer info

61012016000

Lagerstatus: 3
Pris: 115kr
PowerParts|Tools/Transportation|Transportation
Brake lock
Practical help when loading the bike or jacking it up with the rear wheel lifting device.
Practical help when loading the bike or jacking it up with the rear wheel lifting device. dölj mer info

54829094100

Lagerstatus: 9
Pris: 195kr
PowerParts|Tools/Transportation|Transportation
Fork support
  • Stabilizes your motorcycle during transportation
  • Protects the fork shaft seal rings and fork springs from damage due to overly strong tightening down with lashing straps while transportation
  • Gets clamped in between the tyre and the bottom of the front wheel fender
<ul><li class="li-square">Stabilizes your motorcycle during transportation</li><li class="li-square">Protects the fork shaft seal rings and fork springs from damage due to overly strong tightening down with lashing straps while transportation</li><li class="li-square">Gets clamped in between the tyre and the bottom of the front wheel fender</li></ul> dölj mer info

SXS05125600

Lagerstatus: 8
Pris: 115kr
PowerParts|Tools/Transportation|Transportation
Grip protection set
Prevents dirty grips.
Prevents dirty grips. dölj mer info

77512950200

Lagerstatus: hos lev.
Pris: 455kr
PowerParts|Tools/Transportation|Transportation
Lashing strap set
2 units. High-quality soft ties with rubberized fastening hooks and handlebar loops. In the KTM colors orange/black with KTM PowerParts logo.
2 units. High-quality soft ties with rubberized fastening hooks and handlebar loops. In the KTM colors orange/black with KTM PowerParts logo. dölj mer info

77512950300

Lagerstatus: 2
Pris: 195kr
PowerParts|Tools/Transportation|Transportation
Lashing strap set
  • Enables secure attachment to the machine without scratching your handlebars or tank
  • Made from durable ballistic nylon
  • Load capacity of 280 kg
  • With handlebar loops
  • With rubberized hooks on both belt ends
<ul><li class="li-square">Enables secure attachment to the machine without scratching your handlebars or tank</li><li class="li-square">Made from durable ballistic nylon</li><li class="li-square">Load capacity of 280 kg</li><li class="li-square">With handlebar loops</li><li class="li-square">With rubberized hooks on both belt ends</li></ul> dölj mer info

79412950000

Lagerstatus: 2
Pris: 575kr
PowerParts|Tools/Transportation|Transportation
Lashing strap set
  • Enables secure attachment to the machine without scratching your handlebars or tank
  • Made from durable ballistic nylon
  • Load capacity of 280 kg
  • With handlebar loops
  • With rubberized hooks on both belt ends
<ul><li class="li-square">Enables secure attachment to the machine without scratching your handlebars or tank</li><li class="li-square">Made from durable ballistic nylon</li><li class="li-square">Load capacity of 280 kg</li><li class="li-square">With handlebar loops</li><li class="li-square">With rubberized hooks on both belt ends</li></ul> dölj mer info

79029930000

Lagerstatus: hos lev.
Pris: 525kr
PowerParts|Tools/Transportation|Transportation
Pit board
To display the most important information to the driver in the race or during training. Incl. white marker pen to write on black backside.
To display the most important information to the driver in the race or during training. Incl. white marker pen to write on black backside. dölj mer info

7811297300099

Lagerstatus: 1
Pris: 925kr
PowerParts|Tools/Transportation|Transportation
Plastic drum
20 liter, KTM transparent plastic canister for use on the racetrack. Includes a flexible hose and screw cap. For legal reasons, not to be used in some countries for storage and transportation of gasoline.
20 liter, KTM transparent plastic canister for use on the racetrack. Includes a flexible hose and screw cap. For legal reasons, not to be used in some countries for storage and transportation of gasoline. dölj mer info

62512007000

Lagerstatus: hos lev.
Pris: 1160kr
PowerParts|Tools/Transportation|Transportation
Protective indoor cover
No hope for dust, scratches, etc. The indoor bike cover turns every KTM into a real eye-catcher in the garage. The fabric consists of a special material with a distinctive structure that is completely impermeable to dust and dirt. The inner side has a soft lining.
No hope for dust, scratches, etc. The indoor bike cover turns every KTM into a real eye-catcher in the garage. The fabric consists of a special material with a distinctive structure that is completely impermeable to dust and dirt. The inner side has a soft lining. dölj mer info

61312007000

Lagerstatus: 1
Pris: 1160kr
PowerParts|Tools/Transportation|Transportation
Protective outdoor cover
The KTM outdoor bike cover guarantees perfect protection all year round. The cover is made from an exclusive, pigmented fabric. Including practical carrier bag.
The KTM outdoor bike cover guarantees perfect protection all year round. The cover is made from an exclusive, pigmented fabric. Including practical carrier bag. dölj mer info

59012007000

Lagerstatus: 2
Pris: 925kr
PowerParts|Tools/Transportation|Transportation
Protective outdoor cover
The KTM outdoor bike cover guarantees perfect protection all year round. The cover is made from an exclusive, pigmented fabric. Including practical carrier bag.
The KTM outdoor bike cover guarantees perfect protection all year round. The cover is made from an exclusive, pigmented fabric. Including practical carrier bag. dölj mer info

78012006000

Lagerstatus: 4
Pris: 805kr
PowerParts|Tools/Transportation|Transportation
Service pit mat
This mat is already obligatory at many races. The special material mix prevents spilt fuel from seeping into the ground. The mat helps in finding fallen tools, bolts and other small loose parts when servicing outdoors. The special KTM design brings the total factory look to your service zone. Size: 160 cm x 100 cm.
This mat is already obligatory at many races. The special material mix prevents spilt fuel from seeping into the ground. The mat helps in finding fallen tools, bolts and other small loose parts when servicing outdoors. The special KTM design brings the total factory look to your service zone. Size: 160 cm x 100 cm. dölj mer info

54812004000

Lagerstatus: 1
Pris: 115kr
PowerParts|Tools/Transportation|Transportation
Transport cover
For rear sprockets up to 50T and 220 mm - 260 mm brake discs.
For rear sprockets up to 50T and 220 mm - 260 mm brake discs. dölj mer info

60012016000

Lagerstatus: hos lev.
Pris: 1510kr
PowerParts|Tools/Transportation|Transportation
U-lock
High-quality U-lock made from hardened steel with a double locking mechanism. Locking cylinder with optimum protection against any attempts at manipulation. 250,000 key versions. Two keys supplied as standard. Includes rotating PVC cover that protects the cylinder lock from dirt. High quality corrosion protection.
High-quality U-lock made from hardened steel with a double locking mechanism. Locking cylinder with optimum protection against any attempts at manipulation. 250,000 key versions. Two keys supplied as standard. Includes rotating PVC cover that protects the cylinder lock from dirt. High quality corrosion protection. dölj mer info

4700808800020

Lagerstatus: hos lev.
Pris: 380kr
PowerParts|Trim parts/decals|Decals
Start number backgrounds
3 parts
3 parts dölj mer info

U6913121

Lagerstatus: hos lev.
Pris: 230kr
PowerParts|Trim parts/decals|Decals
Sticker
KTM sticker made from a special, reflective material. Shines as soon as it is illuminated by a headlight. 2.4 cm tall.
KTM sticker made from a special, reflective material. Shines as soon as it is illuminated by a headlight. 2.4 cm tall. dölj mer info

U6913122

Lagerstatus: hos lev.
Pris: 230kr
PowerParts|Trim parts/decals|Decals
Sticker
KTM sticker made from a special, reflective material. Shines as soon as it is illuminated by a headlight. 2.4 cm tall.
KTM sticker made from a special, reflective material. Shines as soon as it is illuminated by a headlight. 2.4 cm tall. dölj mer info

79608978000

Lagerstatus: 3
Pris: 290kr
PowerParts|Trim parts/decals|Decals
Sticker sheet
KTM stickers, made from robust material to stick on your bike, car, trailer, etc. Contains 5 sheets.
KTM stickers, made from robust material to stick on your bike, car, trailer, etc. Contains 5 sheets. dölj mer info

U6951087

Lagerstatus: 4
Pris: 93kr
PowerParts|Wheels|Special parts
Hub sticker kit
4 pieces 37 mm x31 mm , 4 pieces 48 mm x40 mm.
4 pieces 37 mm x31 mm , 4 pieces 48 mm x40 mm. dölj mer info

7771097605004

Lagerstatus: 7
Pris: 175kr
PowerParts|Wheels|Special parts
Valve cap set
Orange anodized valve caps with valve opening function.
Orange anodized valve caps with valve opening function. dölj mer info

7771097615004

Lagerstatus: 6
Pris: 115kr
PowerParts|Wheels|Special parts
Valve cap set
Orange anodized valve caps.
Orange anodized valve caps. dölj mer info

47009001644

Lagerstatus: hos lev.
Pris: 4345kr
PowerParts|Wheels|Supermoto
Front wheel 2.5x16"
Supermoto front wheel for 85/105 SX models. We recommend the following tires: Dunlop 100/80 - 16 D451F. A Supermoto brake system can be found under the heading BRAKES.
Supermoto front wheel for 85/105 SX models. We recommend the following tires: Dunlop 100/80 - 16 D451F. A Supermoto brake system can be found under the heading BRAKES. dölj mer info

5840900164430

Lagerstatus: hos lev.
Pris: 5730kr
PowerParts|Wheels|Supermoto
Front wheel 3.5x17"
  • 26mm axle diameter
<ul><li class="li-square">26mm axle diameter</li></ul> dölj mer info

47010001644

Lagerstatus: hos lev.
Pris: 4495kr
PowerParts|Wheels|Supermoto
Rear wheel 3.5x16"
Supermoto rear wheel for 85/105 SX models. We recommend the following tires: Dunlop 120/80-16 D451
Supermoto rear wheel for 85/105 SX models. We recommend the following tires: Dunlop 120/80-16 D451 dölj mer info

5841000134430

Lagerstatus: hos lev.
Pris: 6855kr
PowerParts|Wheels|Supermoto
Rear wheel 4.25x17"
Black anodized. A sprocket support and 6 rubber damping blocks are required for fitting.
Black anodized. A sprocket support and 6 rubber damping blocks are required for fitting. dölj mer info

47002042000

Lagerstatus: hos lev.
Pris: 730kr
SpareParts Kits|Clutch / brake lever
Clutch / brake lever

Clutch and brake lever set.

<p>Clutch and brake lever set.</p> dölj mer info

47032010010

Lagerstatus: 1
Pris: 1360kr
SpareParts Kits|Clutch kit
Clutch kit
The clutch kit contains everything you need to repair your clutch.
The clutch kit contains everything you need to repair your clutch. dölj mer info

50302036200

Lagerstatus: 1
Pris: 160kr
SpareParts Kits|Consumables
Hydraulic clutch oil
Hydraulic clutch oil - contents, 75 ml.
Hydraulic clutch oil - contents, 75 ml. dölj mer info

00050002003

Lagerstatus: hos lev.
Pris: 1125kr
SpareParts Kits|Drivetrain kit
Drive kit 14/49
This drive kit consists of a 14 tooth front and a 49 tooth rear sprocket wheel, a Regina chain and master link.
This drive kit consists of a 14 tooth front and a 49 tooth rear sprocket wheel, a Regina chain and master link. dölj mer info

58302021000

Lagerstatus: 1
Pris: 210kr
SpareParts Kits|Grip set
Grip set
The grip set includes a twist grip and a fixed grip.
The grip set includes a twist grip and a fixed grip. dölj mer info

58302021100

Lagerstatus: 3
Pris: 210kr
SpareParts Kits|Grip set
Grip set
The grip set includes a twist grip and a fixed grip.
The grip set includes a twist grip and a fixed grip. dölj mer info

50329080100

Lagerstatus: 4
Pris: 135kr
SpareParts Kits|Other
KTM multi-purpose fork wrench
KTM multi-purpose fork wrench AF-"17/21/27/32" - chrome vanadium in KTM blister pack.
KTM multi-purpose fork wrench AF-"17/21/27/32" - chrome vanadium in KTM blister pack. dölj mer info

53012028200

Lagerstatus: 1
Pris: 105kr
SpareParts Kits|Other
KTM multi-purpose pliers
KTM multi-purpose pliers - 160 mm with soft grip in KTM blister pack.
KTM multi-purpose pliers - 160 mm with soft grip in KTM blister pack. dölj mer info

00062030080

Lagerstatus: hos lev.
Pris: 240kr
SpareParts Kits|Other
Thread insert 10x10
Thread inserts allow the re-use or repair of damaged, stripped and seized tapped holes.
Thread inserts allow the re-use or repair of damaged, stripped and seized tapped holes. dölj mer info

00062030081

Lagerstatus: hos lev.
Pris: 310kr
SpareParts Kits|Other
Thread insert 10x15
Thread inserts allow the re-use or repair of damaged, stripped and seized tapped holes.
Thread inserts allow the re-use or repair of damaged, stripped and seized tapped holes. dölj mer info

00062030091

Lagerstatus: hos lev.
Pris: 240kr
SpareParts Kits|Other
Thread insert 10x1x10
Thread inserts allow the re-use or repair of damaged, stripped and seized tapped holes.
Thread inserts allow the re-use or repair of damaged, stripped and seized tapped holes. dölj mer info

00062030092

Lagerstatus: hos lev.
Pris: 310kr
SpareParts Kits|Other
Thread insert 10x1x15
Thread inserts allow the re-use or repair of damaged, stripped and seized tapped holes.
Thread inserts allow the re-use or repair of damaged, stripped and seized tapped holes. dölj mer info

00062030093

Lagerstatus: hos lev.
Pris: 310kr
SpareParts Kits|Other
Thread insert 10x1x17.5
Thread inserts allow the re-use or repair of damaged, stripped and seized tapped holes.
Thread inserts allow the re-use or repair of damaged, stripped and seized tapped holes. dölj mer info

00062030082

Lagerstatus: hos lev.
Pris: 310kr
SpareParts Kits|Other
Thread insert 10x20
Thread inserts allow the re-use or repair of damaged, stripped and seized tapped holes.
Thread inserts allow the re-use or repair of damaged, stripped and seized tapped holes. dölj mer info

00062030094

Lagerstatus: hos lev.
Pris: 505kr
SpareParts Kits|Other
Thread insert 12x1.25x12
Thread inserts allow the re-use or repair of damaged, stripped and seized tapped holes.
Thread inserts allow the re-use or repair of damaged, stripped and seized tapped holes. dölj mer info

00062030098

Lagerstatus: hos lev.
Pris: 505kr
SpareParts Kits|Other
Thread insert 12x1.25x12.4
Thread inserts allow the re-use or repair of damaged, stripped and seized tapped holes.
Thread inserts allow the re-use or repair of damaged, stripped and seized tapped holes. dölj mer info

00062030095

Lagerstatus: hos lev.
Pris: 615kr
SpareParts Kits|Other
Thread insert 12x1.25x16
Thread inserts allow the re-use or repair of damaged, stripped and seized tapped holes.
Thread inserts allow the re-use or repair of damaged, stripped and seized tapped holes. dölj mer info

00062030096

Lagerstatus: hos lev.
Pris: 615kr
SpareParts Kits|Other
Thread insert 12x1.25x24
Thread inserts allow the re-use or repair of damaged, stripped and seized tapped holes.
Thread inserts allow the re-use or repair of damaged, stripped and seized tapped holes. dölj mer info

00062030097

Lagerstatus: hos lev.
Pris: 505kr
SpareParts Kits|Other
Thread insert 12x1.25x8.4
Thread inserts allow the re-use or repair of damaged, stripped and seized tapped holes.
Thread inserts allow the re-use or repair of damaged, stripped and seized tapped holes. dölj mer info

00062030083

Lagerstatus: hos lev.
Pris: 510kr
SpareParts Kits|Other
Thread insert 12x12
Thread inserts allow the re-use or repair of damaged, stripped and seized tapped holes.
Thread inserts allow the re-use or repair of damaged, stripped and seized tapped holes. dölj mer info

00062030084

Lagerstatus: hos lev.
Pris: 620kr
SpareParts Kits|Other
Thread insert 12x18
Thread inserts allow the re-use or repair of damaged, stripped and seized tapped holes.
Thread inserts allow the re-use or repair of damaged, stripped and seized tapped holes. dölj mer info

00062030085

Lagerstatus: hos lev.
Pris: 620kr
SpareParts Kits|Other
Thread insert 12x24
Thread inserts allow the re-use or repair of damaged, stripped and seized tapped holes.
Thread inserts allow the re-use or repair of damaged, stripped and seized tapped holes. dölj mer info

00062030099

Lagerstatus: hos lev.
Pris: 505kr
SpareParts Kits|Other
Thread insert 14x1.25x16.4
Thread inserts allow the re-use or repair of damaged, stripped and seized tapped holes.
Thread inserts allow the re-use or repair of damaged, stripped and seized tapped holes. dölj mer info

00062030073

Lagerstatus: hos lev.
Pris: 415kr
SpareParts Kits|Other
Thread insert 5x10
Thread inserts allow the re-use or repair of damaged, stripped and seized tapped holes.
Thread inserts allow the re-use or repair of damaged, stripped and seized tapped holes. dölj mer info

00062030071

Lagerstatus: hos lev.
Pris: 310kr
SpareParts Kits|Other
Thread insert 5x5
Thread inserts allow the re-use or repair of damaged, stripped and seized tapped holes.
Thread inserts allow the re-use or repair of damaged, stripped and seized tapped holes. dölj mer info

00062030072

Lagerstatus: hos lev.
Pris: 415kr
SpareParts Kits|Other
Thread insert 5x7.5
Thread inserts allow the re-use or repair of damaged, stripped and seized tapped holes.
Thread inserts allow the re-use or repair of damaged, stripped and seized tapped holes. dölj mer info

00062030076

Lagerstatus: hos lev.
Pris: 415kr
SpareParts Kits|Other
Thread insert 6x12
Thread inserts allow the re-use or repair of damaged, stripped and seized tapped holes.
Thread inserts allow the re-use or repair of damaged, stripped and seized tapped holes. dölj mer info

00062030074

Lagerstatus: hos lev.
Pris: 415kr
SpareParts Kits|Other
Thread insert 6x6
Thread inserts allow the re-use or repair of damaged, stripped and seized tapped holes.
Thread inserts allow the re-use or repair of damaged, stripped and seized tapped holes. dölj mer info

00062030075

Lagerstatus: hos lev.
Pris: 415kr
SpareParts Kits|Other
Thread insert 6x9
Thread inserts allow the re-use or repair of damaged, stripped and seized tapped holes.
Thread inserts allow the re-use or repair of damaged, stripped and seized tapped holes. dölj mer info

00062030078

Lagerstatus: hos lev.
Pris: 240kr
SpareParts Kits|Other
Thread insert 8x12
Thread inserts allow the re-use or repair of damaged, stripped and seized tapped holes.
Thread inserts allow the re-use or repair of damaged, stripped and seized tapped holes. dölj mer info

00062030079

Lagerstatus: hos lev.
Pris: 240kr
SpareParts Kits|Other
Thread insert 8x16
Thread inserts allow the re-use or repair of damaged, stripped and seized tapped holes.
Thread inserts allow the re-use or repair of damaged, stripped and seized tapped holes. dölj mer info

00062030077

Lagerstatus: hos lev.
Pris: 240kr
SpareParts Kits|Other
Thread insert 8x8
Thread inserts allow the re-use or repair of damaged, stripped and seized tapped holes.
Thread inserts allow the re-use or repair of damaged, stripped and seized tapped holes. dölj mer info

00062030070

Lagerstatus: hos lev.
Pris: 4120kr
SpareParts Kits|Other
Thread repair toolkit
Repair solutions for defective threads M5,6,8,10,12
Repair solutions for defective threads M5,6,8,10,12 dölj mer info

00062030090

Lagerstatus: hos lev.
Pris: 4995kr
SpareParts Kits|Other
Thread repair toolkit spark plugs

HeliCoil plus

Spark plug thread repair selection M10x1 / M12x1.25 / M14x1.25.

<p> HeliCoil plus</p><p> Spark plug thread repair selection M10x1 / M12x1.25 / M14x1.25.</p> dölj mer info

78009015000

Lagerstatus: 11
Pris: 610kr
SpareParts Kits|Wheel repair kit
Front wheel repair kit
The repair kit contains everything you need to repair the bearing support in your wheel.
The repair kit contains everything you need to repair the bearing support in your wheel. dölj mer info

78010015010

Lagerstatus: 1
Pris: 610kr
SpareParts Kits|Wheel repair kit
Rear wheel repair kit
The repair kit contains everything you need to repair the bearing support in your wheel.
The repair kit contains everything you need to repair the bearing support in your wheel. dölj mer info