• More power and torque
• Manufactured from high-grade titanium, with carbon fiber silencer cap
• Fixed welded attachment
• Akrapovi? logo sticker on silencer

• Made from polyester, with special rubberized back
• Gas and oil resistant
• In special KTM design
• Size: 100 x 170 cm

• High-strength steel teeth
• Aluminium inner ring
• Joined together permanently with high-strength rivets
• At least three times longer service life than other aluminum rear sprockets
• Only half as heavy as conventional steel rear sprockets

Made exclusively for KTM by Supersprox. This product is protected in the EU and the USA by the following patents. EU patent # EP1573234. US patent # 7.481.729. Patent holder Supersprox a.s.

• High-strength alloy steel teeth for extra long life
• Aluminum center section reduces the unsprung mass
• Permanently joined together with high-tensile rivets
• At least three times longer service life than any other aluminum rear sprockets
• 50% lighter than conventional steel sprockets

Further advantages: Longer service life of the entire drive train kit

• Ratchet (with locking device), lever, two extensions and socket wrench
• Hexagon sockets from 4 to 14
• Allen keys from 3 to 8
• Phillips, slotted and Torx bits

• Diameter 230 mm
• Manufactured from special high-grade stainless steel
• Minimal wear on brake linings
• The rear brake caliper mounting kit 72010960044 is required for mounting

• Floating brake disc manufactured from special high-grade stainless steel
• With wave design for added braking performance
• Minimal wear on brake linings
• The front brake caliper mounting kit 72009960044 is required for mounting

• Manufactured from special high-grade stainless steel
• With wave design for added braking performance
• Minimal wear on brake linings
• The rear brake caliper mounting kit 72010960044 is required for mounting

• Manufactured from high-strength 7075-T6 aluminum, the strongest aluminum in the world
• The chain runs smoothly, straight as a die and true, because it's ground level to an accuracy of 0.002 mm
• Free from vibration – therefore the highest power transmission efficiency
• Orange anodized with a permanent, organic and environmentally friendly pigment

• High-strength steel teeth
• Aluminium inner ring
• Joined together permanently with high-strength rivets
• At least three times longer service life than other aluminum rear sprockets
• Only half as heavy as conventional steel rear sprockets

Made exclusively for KTM by Supersprox. This product is protected in the EU and the USA by the following patents. EU patent # EP1573234. US patent # 7.481.729. Patent holder Supersprox a.s.

• More power and torque
• Manufactured from high-grade titanium, with carbon fiber silencer cap
• Fixed welded attachment
• Akrapovi? logo sticker on silencer

• Made of high quality, extra strong and durable steel
• Nickel-plated surface
• Broader, smoother powerband
• Higher speed
• More traction, better throttle control
• Complete with o-rings
• Combination with FMF silencer recommended

• Outer sleeve manufactured from high-grade aluminum
• Full sound despite low noise level
• Light weight
• Perfect fit
• Easy to install
• Recommended in combination with a FMF Fatty pipe for a perfectly matched full system with optimum performance
• Specially developed for use in Motocross

• Ergonomic; contour matched to the shape of the hand for maximum comfort
• Small "half waffle" ribs on the rear for secure grip
• Made from two materials with different grades of hardness
• Three areas for the metal safety wire
• Grip hardness: medium

• Ergonomic; contour matched to the shape of the hand for maximum comfort
• Small "half waffle" ribs on the rear for secure grip
• Made from two materials with different grades of hardness
• Three areas for the metal safety wire
• Grip hardness: soft

• Harder orange material on the inside and at the grip ends for a long service life
• Softer black material on the outside, where the hand lies on the grip, for increased comfort
• With open grip ends for closed handguards or bar ends

• Harder orange material on the inside and at the grip ends for a long service life
• Softer black material on the outside, where the hand lies on the grip, for increased comfort

• Grip replacement made easy
• Right grip permanently glued to the throttle grip
• Left grip with aluminum clamping ring for fixing on the handlebar
• Inconvenient gluing and securing with wire no longer necessary

• Grip replacement made easy
• Right grip permanently glued to the throttle grip
• Left grip with aluminum clamping ring for fixing on the handlebar
• Inconvenient gluing and securing with wire no longer necessary

• Grip replacement made easy
• Right grip permanently glued to the throttle tube
• Left grip with aluminum clamping ring for fixing on the handlebar
• Inconvenient gluing and securing with wire no longer necessary
• With open grip end for mounting of closed hand guard

• Open version
• Manufactured with two-component injection molding technology
• Black mid-section = maximum strength for optimum protection
• Coloured top and bottom parts = highly flexible, enduring even the roughest of treatment
• Attached directly at the levers with a special mounting.

• Open version
• Manufactured with two-component injection molding technology
• Black mid-section = maximum strength for optimum protection
• Coloured top and bottom parts = highly flexible, enduring even the roughest of treatment
• Attached directly at the levers with a special mounting.

• Open version
• Manufactured with two-component injection molding technology
• Black mid-section = maximum strength for optimum protection
• Coloured top and bottom parts = highly flexible, enduring even the roughest of treatment
• Attached directly at the levers with a special mounting.

• Black mid-section = maximum strength for optimum protection
• Coloured top and bottom parts = highly flexible, enduring even the roughest of treatment

• Never again cold fingers!
• Mounting over handlebar and switches
• Better control during winter ride-outs

• Cushioning of heavy knocks
• Absorption of vibration from chassis and engine
• Additional handlebar damping in horizontal direction
• Optimum steering precision
• Handlebar height adjustable to 2 positions
• Further damping elements available in three degrees of hardness (soft, medium, hard) for individual tuning

Dimensions: A=113mm / B=779mm / C=75mm

Dimensions: A = 79 mm, B = 811 mm, C = 74 mm

• Including plastic insert
• The brake or clutch armature rotates in case of a fall
• Reduces the risk of a lever being broken
• Suitable for all Brembo® and Formula brake and clutch assembles

Medium-strength thread lock. Suitable for all metal thread connections.

Medium strength thread lock - contents, 50 ml.

• Temperature resistant from -55 to +200 °C 
• Fills gaps up to 0.25 mm
• Final strength achieved after 1 to 3 hours
  

• Made from neoprene
• Ideal protection for sealing the fork
• For use with the open fork protector
• For fork tube with a diameter of 43 mm

• Prevents damage to the engine case in the event of the chain breaking
• No pulling-in of stones between chain and engine case (material-friendly)
• CNC-machined from high-strength aluminium
• Best possible and effective protection for the clutch slave cylinder

• Made from 4mm-thick, high-strength, robust aluminum
• Extremely hard-wearing and endurance-tested for the toughest offroad use
• Precisely fitting design - specially developed for KTM models
• Highest quality workmanship
• Quick and simple installation

• Made from high-grade aluminum
• Optimally tuned steering stem stiffness
• 100% alignment of the fork tubes
• Perfect flexibility – adapted precisely to the WP fork
• Including steering stem with steering head bearing already pressed on

• Two different heights possible
• Can be used as a stand for the quickfill system
• Storage space for the front and rear axle when removing the wheels
• Attachments for the following parts: mud removal tool, exhaust plug, magnetic bolt pan and various tools

Tool for lifting the motorcycle.

Stroke: 260/370 mm
Maximum load:  150 kg

• Easy handling and operation
• More safety
• Less wear on the cord
• Made of high quality material
• Cable not included

• 100 mm length
• 20 blades: 0,05 - 0,1 - 0,15 - 0,2 - 0,25 - 0,3- 0,35 - 0,4 - 0,45 - 0,5 - 0,55 - 0,6 - 0,65 - 0,7 - 0,75 - 0,8 - 0,85 - 0,9 - 0,95 - 1,0 mm

• Contents are in accordance with DIN standard 13167-2014 for motorcyclists
• Waterproof packaging
• With its slim shape and Velcro straps at the back, the first aid kit is easy to store

Note:

It is mandatory to carry a first aid kit in many countries (such as Austria, Italy, Portugal and Spain).

The optimum solution for always having the most important tools to hand when on the road.

• Ratchet (with locking device), lever, two extensions and socket wrench
• Hexagon sockets from 6 to 24
• Allen keys from 3 to 10
• Phillips and slotted bits
• Torx bits from 15 to 55

• Ratchet (with locking device), lever, two extensions and socket wrench
• Hexagon sockets from 4 to 14
• Allen keys from 3 to 8
• Phillips, slotted and Torx bits

• Push-on spoke wrenches in sizes 5.65 and 6.95 mm
• Push-on ratchet ¼"
• Ratchet attachments: 6, 8, 10 mm socket wrench, 15 Torx

• Enables secure attachment to the machine without scratching your handlebars or tank
• With rubberized hooks and handlebar loops on belt ends
• 2 units

• Enables secure attachment to the machine without scratching your handlebars or tank
• Made from durable ballistic nylon
• Load capacity of 280 kg
• With handlebar loops
• With rubberized hooks on both belt ends

• Enables secure fastening to the machine without scratching your handlebars or tank
• Made from durable ballistic nylon
• Load capacity of 280 kg
• With handlebar loops
• With a rubberized hook and a carabiner on the belt ends
• 2 units

• Made from polyester, with special rubberized back
• Gas and oil resistant
• In special KTM design
• Size: 100 x 170 cm

• 10 pcs. cleanig towels, packed separately
• towel size 285 x 200 mm
• 70% Isopropanol
• ideal for cleaning of surfaces before application of stickers

• Extra thick film
• Protects the outer tubes against stone impact