Recommended for use on sandy tracks. Installation together with oiled air filter and dry dust guard 77206920100.
Approvals: CCCUO_EU
Recommended for use on sandy tracks. Installation together with oiled air filter and dry dust guard 77206920100.
Approvals: CCCUO_EU
Användarmanual:
PASSAR TILL
Air filter dust protection
77206920100
5841301564404
Lagerstatus:
Pris: 5905kr
Köp
4 piston brake caliper
KTM brake calipers are distinguished by the following features:
CNC milled from high-strength solid aluminum
Chrome-plated pad guide pins on the brake caliper
The benefits:
Reduced brake pad canting, hence no uneven wear
Constant braking feel, irrespective of brake pad wear or temperature
No vibration from the brake
Fitting possible on SX/EXC models without adapter, with the original hand pump and brake hose. Can only be fitted with a 17"or 16.5" front wheel. 310 mm brake disc 586.09.060.000 or 250.09.260.000 required. In combination with brake disc 25009260000 (310 mm) no speedometer signal will be sent.
Approvals: CCCUO_EU
Colour: Orange
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
Visa hela beskrivningen
KTM brake calipers are distinguished by the following features:
CNC milled from high-strength solid aluminum
Chrome-plated pad guide pins on the brake caliper
The benefits:
Reduced brake pad canting, hence no uneven wear
Constant braking feel, irrespective of brake pad wear or temperature
No vibration from the brake
Fitting possible on SX/EXC models without adapter, with the original hand pump and brake hose. Can only be fitted with a 17"or 16.5" front wheel. 310 mm brake disc 586.09.060.000 or 250.09.260.000 required. In combination with brake disc 25009260000 (310 mm) no speedometer signal will be sent.
Outer ring made of stainless high-performance brake steel
Minimal wear on brake pads
Significantly longer lasting
With Flame design for added braking performance
Approvals: ABE
Diameter: 220
Factory Racing: USED BY FACTORY RACING
Material (PowerParts): Stainless steel
Alignment: Rear
Visa hela beskrivningen
No fading
Outer ring made of stainless high-performance brake steel
Minimal wear on brake pads
Significantly longer lasting
With Flame design for added braking performance
Approvals: ABE
Diameter: 220
Factory Racing: USED BY FACTORY RACING
Material (PowerParts): Stainless steel
Alignment: Rear
Användarmanual:
58409060200
Lagerstatus:
Pris: 3105kr
Köp
Wave brake disc
Floating, stainless steel brake disc. The inner ring is made of aluminum to save weight. The pressure point doesn’t change, even when subjected to extreme temperatures and forces. Please note: Combination with 58413014000 not possible! Not for use with 2-piston Brembo® brake caliper.
Approvals: ABE
Colour: Orange
Diameter: 320 mm
Material (PowerParts): Stainless steel
Visa hela beskrivningen
Floating, stainless steel brake disc. The inner ring is made of aluminum to save weight. The pressure point doesn’t change, even when subjected to extreme temperatures and forces. Please note: Combination with 58413014000 not possible! Not for use with 2-piston Brembo® brake caliper.
Approvals: ABE
Colour: Orange
Diameter: 320 mm
Material (PowerParts): Stainless steel
Användarmanual:
77709160000
Lagerstatus:
Pris: 1695kr
Köp
Wave brake disc
Floating
Outer ring made of stainless high-performance brake steel
Inner ring anodised
Minimal wear on brake pads
Approvals: EC-V
Colour: Black
Diameter: 260 mm
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
Alignment: Front
Visa hela beskrivningen
Floating
Outer ring made of stainless high-performance brake steel
This is how the factory riders start! The factory start is mounted directly on the fork. Before the start, the fork is dipped and fixed in the desired position to shift the center of gravity forwards. This to a large extent prevents the front wheel from lifting at the start, thus providing greater traction and perhaps securing you the odd holeshot or two. The first time the fork dips, the fixing is slackened and the fork released automatically. With additional fork protector reinforcement for more stable attachment to the fork stub.
Approvals: HOMNN_EU
Colour: Black
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
Visa hela beskrivningen
This is how the factory riders start! The factory start is mounted directly on the fork. Before the start, the fork is dipped and fixed in the desired position to shift the center of gravity forwards. This to a large extent prevents the front wheel from lifting at the start, thus providing greater traction and perhaps securing you the odd holeshot or two. The first time the fork dips, the fixing is slackened and the fork released automatically. With additional fork protector reinforcement for more stable attachment to the fork stub.
Approvals: HOMNN_EU
Colour: Black
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
Användarmanual:
SXS05450210
Lagerstatus:
Pris: 300kr
Köp
Brake fluid reservoir and clutch reservoir cover
CNC milled from high-strength aluminum
Elegant anodised surface
Visual highlight
Approvals: HOMNN_EU
Colour: Orange
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
Alignment: Front
Visa hela beskrivningen
CNC milled from high-strength aluminum
Elegant anodised surface
Visual highlight
Approvals: HOMNN_EU
Colour: Orange
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
Alignment: Front
U6951981
Lagerstatus:
Pris: 275kr
Köp
Brake fluid reservoir cover
CNC milled from high-strength aluminum
Elegant anodised surface
Visual highlight
Approvals: HOMNN_EU
Colour: Orange
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
Alignment: Rear
Visa hela beskrivningen
CNC milled from high-strength aluminum
Elegant anodised surface
Visual highlight
Approvals: HOMNN_EU
Colour: Orange
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
Alignment: Rear
SXS05450220
Lagerstatus:
Pris: 300kr
Köp
Clutch reservoir cover
Installation possible with all Magura clutch master cylinders.
Approvals: HOMNN_EU
Colour: Orange
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
Installation possible with all Magura clutch master cylinders.
Approvals: HOMNN_EU
Colour: Orange
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
SXS08300040
Lagerstatus:
Pris: 425kr
Köp
Factory adjuster wheel set
CNC milled from high-strength aluminum
Elegant anodised surface
Easy to mount
Visual highlight
Suitable for the left and right side
Approvals: HOMNN_EU
Colour: Orange
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
Visa hela beskrivningen
CNC milled from high-strength aluminum
Elegant anodised surface
Easy to mount
Visual highlight
Suitable for the left and right side
Approvals: HOMNN_EU
Colour: Orange
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
U6951010
Lagerstatus:
Pris: 105kr
Köp
Factory fuel cap vent
CNC milled from high-strength aluminum
Elegant anodised surface
Visual highlight
Approvals: HOMNN_EU
Colour: Orange
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
Visa hela beskrivningen
CNC milled from high-strength aluminum
Elegant anodised surface
Visual highlight
Approvals: HOMNN_EU
Colour: Orange
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
54835980000
Lagerstatus:
Pris: 100kr
Köp
Foam rubber
Protects the radiator from mud, dirt and sand
Protection against rapid overheating of the engine in muddy conditions
For extremely muddy conditions
Approvals: HOMNN_EU
Protects the radiator from mud, dirt and sand
Protection against rapid overheating of the engine in muddy conditions
For extremely muddy conditions
Approvals: HOMNN_EU
7733503400030
Lagerstatus:
Pris: 175kr
Köp
Radiator protection grille
Suitable for the left and right side.
Approvals: HOMNN_EU
Colour: Black
Suitable for the left and right side.
Approvals: HOMNN_EU
Colour: Black
SXS02125071
Lagerstatus:
Pris: 640kr
Köp
Factory spark plug
Extremely robust spark plug
Center electrode tip made of iridium
Reinforced ground electrode (against vibration and breakage)
Special design with improved anti-sooting characteristic
Recommended in combination with factory cylinder heads, factor exhaust systems or factory digital box
Approvals: CCCUO_EU
Visa hela beskrivningen
Extremely robust spark plug
Center electrode tip made of iridium
Reinforced ground electrode (against vibration and breakage)
Special design with improved anti-sooting characteristic
Recommended in combination with factory cylinder heads, factor exhaust systems or factory digital box
Approvals: CCCUO_EU
REKOMMENDERADE PRODUKTER
SXS15125390
FMF Fatty expansion chamber
SXS11144500
50405907000
SXS11150550
FMF Powercore 2 silencer
50405979000
SXS11125501
SXS11144501
SXS11125550
50405979500
SXS13125044
SXS14125007
SXS16125907 I
SXS16150907 I
Factory cylinder kit
50530938000
SXS07125510
Lagerstatus:
Pris: 1815kr
Köp
Expansion chamber guard
DID YOU ALREADY KNOW about the special properties of carbon fiber?
Extremely light: 80% lighter than steel with the same strength
Exceptionally stable: Four times more durable than aluminum
Maximum stiffness and tensile strength
Free from corrosion
High longterm temperature durability
Minimal heat expansion
And not least of all it looks just cool
The feather light carbon protector for maximum service life of your exhaust. The large cover is ideal protection against flying debris, branches etc.
Approvals: HOMNN_EU
Material (PowerParts): Carbon
Visa hela beskrivningen
DID YOU ALREADY KNOW about the special properties of carbon fiber?
Extremely light: 80% lighter than steel with the same strength
Exceptionally stable: Four times more durable than aluminum
Maximum stiffness and tensile strength
Free from corrosion
High longterm temperature durability
Minimal heat expansion
And not least of all it looks just cool
The feather light carbon protector for maximum service life of your exhaust. The large cover is ideal protection against flying debris, branches etc.
The throttle twist grip has three differently profiled cams, each with a different gear ratio. This allows the throttle response characteristics to be varied in accordance with personal requirements.
Approvals: HOMNN_EU
Colour: Orange
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
Visa hela beskrivningen
The throttle twist grip has three differently profiled cams, each with a different gear ratio. This allows the throttle response characteristics to be varied in accordance with personal requirements.
Adjustable to 3 different heights: 28 mm, 37 mm, 46 mm. Available for handlebar diameters 22 mm and 28 mm.
Approvals: CCCUO_EU
Material (PowerParts): Aluminium
Adjustable to 3 different heights: 28 mm, 37 mm, 46 mm. Available for handlebar diameters 22 mm and 28 mm.
Approvals: CCCUO_EU
Material (PowerParts): Aluminium
Användarmanual:
79701939144
Pris från: 525kr
Köp
Handlebar mount kit
Available in five different heights. Included in the kit are 2x handlebar support lower parts and 2x fastening bolts. The upper parts and bolts required for clamping the handlebar are taken from the original handlebar support.
Approvals: EC-V
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
Height (PowerParts): 37
Visa hela beskrivningen
Available in five different heights. Included in the kit are 2x handlebar support lower parts and 2x fastening bolts. The upper parts and bolts required for clamping the handlebar are taken from the original handlebar support.
These CNC-machined, high-strength aluminum handlebar risers are extremely robust thanks to their special screw fastening (from below) on the triple clamp. Twisting and bending are therefore practically impossible. Use of these handlebar risers is only possible on CNC-machined triple clamps. Available in three different heights.
Approvals: CCCUO_EU
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
Height (PowerParts): 20
Visa hela beskrivningen
These CNC-machined, high-strength aluminum handlebar risers are extremely robust thanks to their special screw fastening (from below) on the triple clamp. Twisting and bending are therefore practically impossible. Use of these handlebar risers is only possible on CNC-machined triple clamps. Available in three different heights.
The exterior ensures maximum resistance to external damage (e.g. fall)
Additionally hard anodised against corrosion
The interior, made of a special alloy, is also hard anodised to protect it from damage by the handlebar controls.
Nylon inserts in the inner tube allow thinner walls
Very good flex properties
Comes with handlebar pad
Renthal Twinwall 996
Dimensions: A = 118 mm, B = 811 mm, C = 74 mm
Approvals: CCCUO_EU
Colour: Black
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
Visa hela beskrivningen
Two handlebars in one
The exterior ensures maximum resistance to external damage (e.g. fall)
Additionally hard anodised against corrosion
The interior, made of a special alloy, is also hard anodised to protect it from damage by the handlebar controls.
Nylon inserts in the inner tube allow thinner walls
Very good flex properties
Comes with handlebar pad
Renthal Twinwall 996
Dimensions: A = 118 mm, B = 811 mm, C = 74 mm
Approvals: CCCUO_EU
Colour: Black
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
77711979000
Lagerstatus:
Pris: 170kr
Köp
Auxiliary wiring harness
Enables power consumers such as grip heater or radiator fans to be installed on motocross or cross-country models as well
The power consumer is now connected directly to the battery. Consequently, the battery is also drained when the engine is not running, unless the consumer is switched off.
Approvals: HOMNN_EU
Visa hela beskrivningen
Enables power consumers such as grip heater or radiator fans to be installed on motocross or cross-country models as well
The power consumer is now connected directly to the battery. Consequently, the battery is also drained when the engine is not running, unless the consumer is switched off.
Approvals: HOMNN_EU
REKOMMENDERADE PRODUKTER
Auxiliary wiring harness
77711979010
Auxiliary wiring harness
77711979044
77711979010
Lagerstatus:
Pris: 95kr
Köp
Auxiliary wiring harness
The Y-distributor allows you to connect two power consumers to auxiliary wiring harness 77711979000.
Approvals: HOMNN_EU
The Y-distributor allows you to connect two power consumers to auxiliary wiring harness 77711979000.
Approvals: HOMNN_EU
REKOMMENDERADE PRODUKTER
Auxiliary wiring harness
77711979000
77711979044
Lagerstatus:
Pris: 375kr
Köp
Auxiliary wiring harness
The Y-distributor allows you to connect two power consumers to auxiliary wiring harness 77711979000. The connected power consumer can be switched off with the integrated switch. This prevents the battery from being drained unnecessarily.
Approvals: HOMNN_EU
Visa hela beskrivningen
The Y-distributor allows you to connect two power consumers to auxiliary wiring harness 77711979000. The connected power consumer can be switched off with the integrated switch. This prevents the battery from being drained unnecessarily.
Approvals: HOMNN_EU
REKOMMENDERADE PRODUKTER
Auxiliary wiring harness
77711979000
Pull switch bracket
77711969044
78112920044
Lagerstatus:
Pris: 145kr
Köp
Hourmeter bracket
To assemble the hour counter on the triple clamp.
Approvals: HOMNN_EU
To assemble the hour counter on the triple clamp.
Approvals: HOMNN_EU
REKOMMENDERADE PRODUKTER
78112920000
7870293104404
Lagerstatus:
Pris: 1065kr
Köp
Flex clutch lever
Elegant anodised surface
Visual highlight with technical and ergonomic added value
Flaps removed on ground contact
Prevents broken levers
Suitable for all hydraulic Brembo® clutch fittings.
Approvals: HOMNN_EU
Colour: Orange
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
Visa hela beskrivningen
Elegant anodised surface
Visual highlight with technical and ergonomic added value
Flaps removed on ground contact
Prevents broken levers
Suitable for all hydraulic Brembo® clutch fittings.
Approvals: HOMNN_EU
Colour: Orange
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
Användarmanual:
REKOMMENDERADE PRODUKTER
7801380220004
Flex brake lever
7871390204404
77702944000
Lagerstatus:
Pris: 200kr
Köp
Clamp
CNC milled from high-strength aluminum
Elegant anodised surface
Visual highlight
Including plastic insert
Reduces the risk of a lever being broken
Suitable for all Brembo® and Formula brake and clutch assembles
Approvals: HOMNN_EU
Colour: Orange
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
Visa hela beskrivningen
CNC milled from high-strength aluminum
Elegant anodised surface
Visual highlight
Including plastic insert
Reduces the risk of a lever being broken
Suitable for all Brembo® and Formula brake and clutch assembles
Approvals: HOMNN_EU
Colour: Orange
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
54802005000
Lagerstatus:
Pris: 170kr
Köp
Handlebar ends
CNC milled from high-strength aluminum
Elegant anodised surface
Visual highlight
Prevents the hand grips from chafing in the event of a fall
Approvals: HOMNN_EU
Colour: Orange
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
Visa hela beskrivningen
CNC milled from high-strength aluminum
Elegant anodised surface
Visual highlight
Prevents the hand grips from chafing in the event of a fall
Approvals: HOMNN_EU
Colour: Orange
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
RESERVDELAR
FLAT HEAD SCREW DIN7991-M 6X50
0991060503
hex nut DIN 934 M6
0934060003
79002901050
Lagerstatus:
Pris: 405kr
Köp
Handlebar pad
Already mandatory in many competitions
Provides optimum protection
Visual highlight
With the integrated card holder you always have the time in view. A small extra pocket allows you to stow small items. Can also be fitted in combination with the PHDS-handlebar support.
Approvals: HOMNN_EU
Colour: Orange
Visa hela beskrivningen
Already mandatory in many competitions
Provides optimum protection
Visual highlight
With the integrated card holder you always have the time in view. A small extra pocket allows you to stow small items. Can also be fitted in combination with the PHDS-handlebar support.
Approvals: HOMNN_EU
Colour: Orange
SXS07250800
Lagerstatus:
Pris: 280kr
Köp
Handlebar pad
Already mandatory in many competitions
Provides optimum protection
Visual highlight
Can also be fitted in combination with the PHDS-handlebar support.
Approvals: HOMNN_EU
Colour: Orange
Already mandatory in many competitions
Provides optimum protection
Visual highlight
Can also be fitted in combination with the PHDS-handlebar support.
Approvals: HOMNN_EU
Colour: Orange
79702902000
Lagerstatus:
Pris: 320kr
Köp
Smartphone handlebar pad
Protects your valuable smartphone from rain, dust or mud
Touchscreen remains fully functional
Handlebar pad and smartphone holder in one
Smartphone cover with velcro fastener attached to the handlebar pad
Smartphone can be easily removed with its cover
Optimal solution for quick and secure fastening of your smartphone on the vehicle
For Smartphones up to 160 x 80 mm
Comes with two separate protective strips in case the sleeve is not used
Can also be fitted in combination with the PHDS-handlebar support
Smartphone not included!
Approvals: HOMNN_EU
Colour: Orange
Visa hela beskrivningen
Protects your valuable smartphone from rain, dust or mud
Touchscreen remains fully functional
Handlebar pad and smartphone holder in one
Smartphone cover with velcro fastener attached to the handlebar pad
Smartphone can be easily removed with its cover
Optimal solution for quick and secure fastening of your smartphone on the vehicle
For Smartphones up to 160 x 80 mm
Comes with two separate protective strips in case the sleeve is not used
Can also be fitted in combination with the PHDS-handlebar support
Smartphone not included!
Approvals: HOMNN_EU
Colour: Orange
58512050100
Lagerstatus:
Pris: 6440kr
Köp
Factory Racing steering damper
High-end steering damper
Maximum control on fast tracks
Gain in stability at the front wheel
Fully adjustable
Well thought-out mounting of the damper enables individual handlebar adjustment
Reduced weight
Sensitive response behavior
High speed DCC
Developed according to the requirements of our factory drivers
Optimum 25 click setting range.
Proven success with the KTM Works Rally Team.
For use on Enduro MY21 and later (EU Version), the Factory fuel tank cap vent is required
Approvals: CCCUO_EU
Colour: Gold
Factory Racing: USED BY FACTORY RACING
Visa hela beskrivningen
High-end steering damper
Maximum control on fast tracks
Gain in stability at the front wheel
Fully adjustable
Well thought-out mounting of the damper enables individual handlebar adjustment
Reduced weight
Sensitive response behavior
High speed DCC
Developed according to the requirements of our factory drivers
Optimum 25 click setting range.
Proven success with the KTM Works Rally Team.
For use on Enduro MY21 and later (EU Version), the Factory fuel tank cap vent is required
The perfect alternative tool on the go. Conveniently packaged in a small bag you can use the tool for following fittings: 14, 12, 10, 8 mm hexagon sockets; 6, 8, 13 mm socket wrench; Inserts for slotted and Phillips screw heads, 5 mm / 6 mm Allen keys, 25/30 and 40/45 Torx; bottle opener; Option for attaching for 3/8 "and 1/4" socket wrench.
Approvals: HOMNN_EU
Visa hela beskrivningen
The perfect alternative tool on the go. Conveniently packaged in a small bag you can use the tool for following fittings: 14, 12, 10, 8 mm hexagon sockets; 6, 8, 13 mm socket wrench; Inserts for slotted and Phillips screw heads, 5 mm / 6 mm Allen keys, 25/30 and 40/45 Torx; bottle opener; Option for attaching for 3/8 "and 1/4" socket wrench.
Approvals: HOMNN_EU
Användarmanual:
7802906500004
Lagerstatus:
Pris: 105kr
Köp
Oil bottle
Perfect for all 2-stroke riders on the move. The small bottle fits in your tool bag or jacket. Capacity 250 ml, with scaling for different mixture ratios (1 : 40 / 2.5 %; 1 : 50 / 2 %; 1 : 60 / 1.7 %; 1 : 80 / 1.25 %)
Approvals: HOMNN_EU
Colour: Transparent
Volume: 0.25
Visa hela beskrivningen
Perfect for all 2-stroke riders on the move. The small bottle fits in your tool bag or jacket. Capacity 250 ml, with scaling for different mixture ratios (1 : 40 / 2.5 %; 1 : 50 / 2 %; 1 : 60 / 1.7 %; 1 : 80 / 1.25 %)
There's racing experience here as well! Practical tyre lever set, consisting of
3 x short version 51012092100
3 x long version 51012093100
Approvals: HOMNN_EU
Colour: Black
Material (PowerParts): Steel
Visa hela beskrivningen
There's racing experience here as well! Practical tyre lever set, consisting of
3 x short version 51012092100
3 x long version 51012093100
Approvals: HOMNN_EU
Colour: Black
Material (PowerParts): Steel
58312078000
Lagerstatus:
Pris: 170kr
Köp
Tool bag
The optimum solution for always having the most important tools to hand when on the road.
Approvals: HOMNN_EU
The optimum solution for always having the most important tools to hand when on the road.
Approvals: HOMNN_EU
00029098400
Lagerstatus:
Pris: 1925kr
Köp
Toolbox
60-piece, 3/8" toolbox in orange with high-quality, chrome-vanadium tools. Content:
Ratchet (with locking device), lever, two extensions and socket wrench
Hexagon sockets from 6 to 24
Allen keys from 3 to 10
Phillips and slotted bits
Torx bits from 15 to 55
With this, small jobs on your KTM can be completed quickly and reliably. Whether you're removing fairings or changing the oil, you'll definitely find the right tool here.
Approvals: HOMNN_EU
Colour: Orange
Visa hela beskrivningen
60-piece, 3/8" toolbox in orange with high-quality, chrome-vanadium tools. Content:
Ratchet (with locking device), lever, two extensions and socket wrench
Hexagon sockets from 6 to 24
Allen keys from 3 to 10
Phillips and slotted bits
Torx bits from 15 to 55
With this, small jobs on your KTM can be completed quickly and reliably. Whether you're removing fairings or changing the oil, you'll definitely find the right tool here.
38-piece, 1/4" toolbox in orange with high-quality, chrome-vanadium tools. Content:
Ratchet (with locking device), lever, two extensions and socket wrench
Hexagon sockets from 4 to 14
Allen keys from 3 to 8
Phillips, slotted and Torx bits
With this, small jobs on your KTM can be completed quickly and reliably. Whether you're removing fairings or changing the oil, you'll definitely find the right tool here.
Approvals: HOMNN_EU
Visa hela beskrivningen
38-piece, 1/4" toolbox in orange with high-quality, chrome-vanadium tools. Content:
Ratchet (with locking device), lever, two extensions and socket wrench
Hexagon sockets from 4 to 14
Allen keys from 3 to 8
Phillips, slotted and Torx bits
With this, small jobs on your KTM can be completed quickly and reliably. Whether you're removing fairings or changing the oil, you'll definitely find the right tool here.
Approvals: HOMNN_EU
00029996000
Lagerstatus:
Pris: 2890kr
Köp
Torque wrench
High-quality, adjustable torque wrench 5-25 NM, including the following accessories:
Push-on spoke wrenches in sizes 5.65 and 6.95 mm
Push-on ratchet ¼"
Ratchet attachments: 6, 8, 10 mm socket wrench, 15 Torx
Approvals: HOMNN_EU
Visa hela beskrivningen
High-quality, adjustable torque wrench 5-25 NM, including the following accessories:
Push-on spoke wrenches in sizes 5.65 and 6.95 mm
Push-on ratchet ¼"
Ratchet attachments: 6, 8, 10 mm socket wrench, 15 Torx
Approvals: HOMNN_EU
78129984000
Lagerstatus:
Pris: 1065kr
Köp
Tyre lever kit
Made of high strength, orange anodized aluminum; not suitable for tire mounting with mousse. With integrated ring wrench SW 32, 27, 17, 13 and 10 mm.
Approvals: HOMNN_EU
Colour: Orange
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
Visa hela beskrivningen
Made of high strength, orange anodized aluminum; not suitable for tire mounting with mousse. With integrated ring wrench SW 32, 27, 17, 13 and 10 mm.
Approvals: HOMNN_EU
Colour: Orange
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
77329068000
Lagerstatus:
Pris: 425kr
Köp
Tyre pressure gauge
Comfortable and easy to use
Fits all standard valves. Pressure display in bar or psi
Integrated pressure release valve for accurate pressure adjustment
Disengageable display and work area lighting
Energy-saving function with automatic cut-off
Maximum measuring pressure: 11 bar
Approvals: HOMNN_EU
Colour: Black
Visa hela beskrivningen
Comfortable and easy to use
Fits all standard valves. Pressure display in bar or psi
Integrated pressure release valve for accurate pressure adjustment
Disengageable display and work area lighting
Energy-saving function with automatic cut-off
Maximum measuring pressure: 11 bar
Approvals: HOMNN_EU
Colour: Black
Användarmanual:
54829068000
Lagerstatus:
Pris: 325kr
Köp
Tyre pressure gauge
Easy to use! Measuring range 0 bar – 4 bar. Clamping head rotatable through 90° on a flexible stainless steel feed line. The valve shaft is therefore accessed easily and quickly. Very accurate measurements by way of a durable internal membrane. Internal pressure is reduced after use by a relief valve (push button).
Approvals: HOMNN_EU
Visa hela beskrivningen
Easy to use! Measuring range 0 bar – 4 bar. Clamping head rotatable through 90° on a flexible stainless steel feed line. The valve shaft is therefore accessed easily and quickly. Very accurate measurements by way of a durable internal membrane. Internal pressure is reduced after use by a relief valve (push button).