This wheel set consists of a ready-to-fit 17" front wheel including brake disc and tire and a ready-to-fit 14" rear wheel including brake disc, sprocket wheel and tire for the 85 SX model. 2013/2014/2015 models.

Medium strength thread lock - contents, 50 ml.

• Temperature resistant from -55 to +200 °C 
• Fills gaps up to 0.25 mm
• Final strength achieved after 1 to 3 hours
  

Medium-strength thread lock. Suitable for all metal thread connections.

The seal set contains all the seals you need to repair your cylinder.

This drive kit consists of a 14 tooth front and a 46 tooth rear sprocket wheel, a Regina chain and master link.

• Developed according to the requirements of our factory drivers
• Less stress when riding
• Objective: comfort AND safety
• Ergonomic contour adapted to the shape of the hand for maximum comfort
• Half waffle grip
• For a secure grip
• Three areas for the metal wire locking
• Version: medium

• Combines the durability of the KTM standard grips with the comfort of the soft KTM grips
• Harder orange material on the inside and on the grip ends for long durability
• Softer black material on the outside for increased comfort

HeliCoil plus

Spark plug thread repair selection M10x1 / M12x1.25 / M14x1.25.

Individual pre-oiled air filter

This large-pore air filter cover acts as an additional protective layer, hence extending the filter service interval. Recommended in extremely dusty conditions.

Recommended in extremely wet conditions.

• SXS CDI unit
• Factory exhaust system

Supplied without combustion chamber insert.

IMPORTANT:
When it comes to carburetor jets, we recommend selection of your vehicle's standard jets.
Detailed information about carburetor jets is available from your KTM dealer.

• SXS CDI unit
• Factory exhaust system
  Supplied without combustion chamber insert.

• Manufactured from highest grade aluminum
• Optimally tuned steering stem stiffness
• 100% alignment of the fork tubes
• Perfect flexibility - adapted precisely to the KTM fork

• Made from high-grade aluminum
• Optimally tuned steering stem stiffness
• 100% alignment of the fork tubes
• Perfect flexibility – adapted precisely to the WP fork
• Including steering stem with steering head bearing already pressed on

• Convenient and easy to use
• Easy to store
• Waterproof packaging

• Contents are in accordance with DIN standard 13167-2014 for motorcyclists
• Note: It is mandatory to carry a first aid kit in many countries (such as Austria, Italy, Portugal and Spain).

• Enables secure attachment to the machine without scratching your handlebars or tank
• Made from durable ballistic nylon
• Load capacity of 280 kg
• Dimensions: 3,8 cm x 0,6 m
• 2 units

• Enables secure attachment to the machine without scratching your handlebars or tank
• Made from durable ballistic nylon
• Load capacity of 280 kg
• With handlebar loops
• With rubberized hooks on both belt ends
• 2 units

DO YOU KNOW that all KTM CNC parts are manufactured from highest quality aluminum and therefore not only look good, they also withstand the toughest treatment? With the anodized aluminum components in the original factory look from the PowerParts range, you can turn your KTM into something very special.

• Spring-mounted, 20° rotational movement possible towards front and rear
• More control and grip in the corners thanks to the maneuverability
• Large tread surface area of 60 mm
• Simpler and quicker weight shifting
• Simpler gear changing and braking
• Permanent contact between boot and foot pegs: extends the service life of your boots!

• Teeth made of high-strength steel, for an extra long service life
• Aluminum center section, reduces unsprung masses
• Permanently joined together with high-strength rivets
• At least three times longer service life than other aluminum rear sprockets
• 50 % lighter than steel rear sprockets
• Longer service life of the entire drivetrain kit

• Aluminum center section, reduces unsprung masses
• Permanently joined together with high-strength rivets
• At least three times longer service life than other aluminum rear sprockets
• 50 % lighter than steel rear sprockets
• Longer service life of the entire drivetrain kit

• Teeth made of high-strength steel, for an extra long service life
• Aluminum center section, reduces unsprung masses
• Permanently joined together with high-strength rivets
• At least three times longer service life than other aluminum rear sprockets
• 50 % lighter than steel rear sprockets
• Longer service life of the entire drivetrain kit

• Diameter 230 mm
• Manufactured from special high-grade stainless steel
• Minimal wear on brake linings
• The rear brake caliper mounting kit 72010960044 is required for mounting

• Made of high-quality carbon
• Visual highlight
• Optimal protection against stone impact
• High stiffness and strength
• Optimal protection against stone impact

• Outer ring made of stainless high-performance brake steel
• Minimal wear on brake pads

• CNC milled from high-strength aluminum
• Lighter than series components
• Improved braking performance
• High stiffness and strength

• CNC milled from high-strength aluminum
• Lighter than series components
• Protects the brake disc in the event of a fall
• High stiffness and strength
• Protects the rear brake disc from stones and other solid obstacles

• Protects the brake pedal from bending by branches

• Specially developed for use in motocross
• No O- or Z-rings > minimum loss of power and good durability

• Elegant anodized surface
• Extremely light
• Made of high-strength aluminum
• Visual highlight
• Precisely ground to 0.002 mm, dead straight and impact-free chain track
• Free from vibration – therefore the highest power transmission efficiency
• Reduces the rotating masses

• Elegant anodized surface
• Made of high-strength aluminum
• Pure race feeling
• Mounted directly on the fork
• Provides more traction when starting

• Made from high-grade aluminum
• Optimally tuned steering stem stiffness
• 100% alignment of the fork tubes
• Perfect flexibility – adapted precisely to the WP fork
• With longer offset (20 mm): easy quick cornering in curves
• Including steering stem with steering head bearing already pressed on

• Elegant anodized surface
• Visual highlight
• CNC milled aluminum triple clamp
• Optimally tuned steering stem stiffness
• 100% alignment of the fork tubes
• Ideal flexibility – precisely customized to the WP fork
• Including steering stem with steering head bearing already pressed on

• CNC milled from high-strength aluminum
• Elegant anodized surface
• Visual highlight

• CNC milled from high-strength aluminum
• Elegant anodized surface
• Visual highlight

• CNC milled from high-strength aluminum
• Elegant anodized surface
• Visual highlight

• CNC milled from high-strength aluminum
• Elegant anodized surface
• Visual highlight
• Includes drilling for safety wire

Can not be used together with 79405900044 complete Akrapovi? system "EVO".

• For extremely muddy conditions
• Protects the radiator from mud, dirt and sand
• Protection against rapid overheating of the engine in muddy conditions

• SXS CDI unit
• Factory start
• Factory outer clutch cover
• Factory ignition cover
• Protection for clutch slave cylinder
• SXS graphics kit

• Specially developed for application in Motocross
• Made from high-grade aluminum
• With standard combustion chamber

• Specially developed for extreme conditions
• Manufactured in a purpose developed alloy
• Enhanced performance from the engine due to the excellent conductivity of the material used with unchanged combustion chamber
• Reduces unwanted detonations in the cylinder, which in turn has a positive effect on the service life as well as on the performance of the engine

• Fat torque curve for optimal rideability
• Minimum weight and maximum performance
• Made from robust steel
• Untreated surface for an original factory look
• Rich, unmistakable sound
• Recommended in combination with a factory silencer for a perfectly matched full system with optimum performance

• Performance boost over the entire rpm range
• Made from high-grade aluminum
• Full sound despite low noise level
• Light weight
• Perfect fit, easy to install
• Recommended in combination with a factory pipe for a perfectly matched full system with optimum performance
• Specially developed for use in Motocross

• Made from high quality, extra strong and durable sheet steel
• Nickel-plated surface
• Wide, even rev band
• High rev speed
• More traction and better control under full throttle
• Including O-rings
• Recommended in combination with an FMF silencer for a perfectly matched full system with optimum performance

• Outer sleeve manufactured from high-grade aluminum
• Full sound despite low noise level
• Light weight
• Perfect fit
• Easy to install
• Recommended in combination with a FMF Fatty pipe for a perfectly matched full system with optimum performance
• Specially developed for use in Motocross

• Move along with weight shift
• Permanent contact between boot and footpeg
• Extends the service life of your boots
• Enlarged tread area
• More control
• More curve pressure
• Easier and faster weight shifting
• Easier shifting and braking

Spring-mounted, 20-degree rotational movement possible towards front and rear

• Coated neoprene ring
• Simply pulled over the grips

• Developed according to the requirements of our factory drivers
• Less stress when riding
• Objective: comfort AND safety
• Ergonomic contour adapted to the shape of the hand for maximum comfort
• Half waffle grip
• For a secure grip
• Three areas for the metal wire locking
• Version: soft

• Right grip permanently glued to the throttle grip
• Left grip with aluminum clamping ring for fixing on the handlebar
• Inconvenient gluing and securing with wire no longer necessary

• For a secure grip
• Maximum grip on the hand grip even in extremely muddy conditions

• Extremely light
• Uncompromising race look
• Open design
• 2-component plastic handguard
• Black middle section = maximum strength for optimum protection
• Colored top and bottom parts = highly flexible under the roughest conditions

• Attached directly at the levers with a special mounting

• Extremely light
• Uncompromising race look
• Open design
• 2-component plastic handguard
• Black middle section = maximum strength for optimum protection
• Colored top and bottom parts = highly flexible under the roughest conditions

• Attached directly at the levers with a special mounting

• Extremely light
• Uncompromising race look
• Open design
• 2-component plastic handguard
• Black middle section = maximum strength for optimum protection
• Colored top and bottom parts = highly flexible under the roughest conditions

• Attached directly at the levers with a special mounting

• Extremely light
• Uncompromising race look
• Open design
• 2-component plastic handguard
• Black middle section = maximum strength for optimum protection
• Colored top and bottom parts = highly flexible under the roughest conditions

• Extremely light
• Uncompromising race look
• Open design
• 2-component plastic handguard
• Black middle section = maximum strength for optimum protection
• Colored top and bottom parts = highly flexible under the roughest conditions

• Never again cold fingers!
• Mounting over handlebar and switches
• Better control during winter ride-outs

• CNC milled handlebar mount with damping rubber inserts
• Gentle on wrists and shoulder joints
• Damping of hard shocks
• Absorption of chassis and engine vibrations
• Additional handlebar damping in horizontal direction
• Optimum steering precision
• Further dampers available in three different degrees of hardness (soft, medium, hard) for individual adjustment

• Handlebar height adjustable to 2 positions

• Made of high-strength aluminum
• Tested in complex and specially-developed test cycles
• Position markings for easy adjustment

• Dimensions: A = 115 mm, B = 806 mm, C = 62 mm

• Tested in complex and specially-developed test cycles
• Made of high-strength aluminum
• Position markings for easy adjustment

Dimensions: A=113mm / B=779mm / C=75mm

• The Twinwall, in the KTM orange design
• Two handlebars in one
• The exterior ensures maximum resistance to external damage (e.g. fall)
• Additionally hard anodized against corrosion
• The interior, made of a special alloy, is also hard anodized to protect it from damage by the handlebar controls.
• Nylon inserts in the inner tube allow thinner walls
• Very good flex properties
• Comes with handlebar pad

Dimensions: A = 79 mm, B = 811 mm, C = 74 mm

• The Twinwall, in the KTM orange design
• Two handlebars in one
• The exterior ensures maximum resistance to external damage (e.g. fall)
• Additionally hard anodized against corrosion
• The interior, made of a special alloy, is also hard anodized to protect it from damage by the handlebar controls.
• Nylon inserts in the inner tube allow thinner walls
• Very good flex properties
• Comes with handlebar pad

• Dimensions: A = 118 mm, B = 811 mm, C = 74 mm

• Know exactly when the next service is due

• Manufactured from high-strength aluminum, forged and then CNC-machined
• This extensive production process guarantees a long service life, maximum flexibility and a precise fit
• Ergonomically perfected shape (the result of years of racing experience)
• Predefined breaking point
• Orange anodized

• Elegant anodized surface
• Visual highlight with technical and ergonomic added value
• The brake or clutch fitting rotates in the event of a fall

• Elegant anodized surface
• Visual highlight with technical and ergonomic added value
• The brake or clutch fitting rotates in the event of a fall

• Elegant anodized surface
• Visual highlight with technical and ergonomic added value
• The brake or clutch fitting rotates in the event of a fall

• CNC milled from high-strength aluminum
• Elegant anodized surface
• Visual highlight
• Including plastic insert
• The brake or clutch fitting rotates in the event of a fall
• Reduces the risk of a lever being broken

Suitable for all Brembo® and Formula brake and clutch assembles

• CNC milled from high-strength aluminum
• Elegant anodized surface
• Visual highlight
• Prevents the hand grips from chafing in the event of a fall

• Already mandatory in many competitions
• Provides optimum protection
• Visual highlight

• Already mandatory in many competitions
• Provides optimum protection
• Visual highlight

• Protects the footpegs from damage during a potential fall

• Ideal protection for sealing the fork
• For use with an open fork protector

• CNC milled from high-strength aluminum
• Not lockable
• Extremely fast and keyless refueling

• CNC milled from high-strength aluminum
• Elegant anodized surface
• Visual highlight

• For tank and carburetor bleeding
• Gasoline resistant
• Can only be used for bleeding purposes
• Cannot be used as a connection between tank and carburetor!

• Available in two different heights
• Storage spage for parts
• Attachment for various tools

• Storage spage for parts
• Attachment for various tools

• Stabilizes the motorcycle during transport
• After transport, the tool serves as a perfect plug-in stand!

• Easy handling and operation
• More safety
• Less wear on the cord
• Made of high quality material
• Cable not included

• 100 mm length
• 20 blades: 0,05 - 0,1 - 0,15 - 0,2 - 0,25 - 0,3- 0,35 - 0,4 - 0,45 - 0,5 - 0,55 - 0,6 - 0,65 - 0,7 - 0,75 - 0,8 - 0,85 - 0,9 - 0,95 - 1,0 mm

• Convenient and easy to use

• Contents are in accordance with DIN standard 13167-2014 for motorcyclists
• Waterproof packaging
• With its slim shape and Velcro straps at the back, the first aid kit is easy to store

Note:

It is mandatory to carry a first aid kit in many countries (such as Austria, Italy, Portugal and Spain).

The optimum solution for always having the most important tools to hand when on the road.

• Ratchet (with locking device), lever, two extensions and socket wrench
• Hexagon sockets from 6 to 24
• Allen keys from 3 to 10
• Phillips and slotted bits
• Torx bits from 15 to 55

• Ratchet (with locking device), lever, two extensions and socket wrench
• Hexagon sockets from 4 to 14
• Allen keys from 3 to 8
• Phillips, slotted and Torx bits

• Push-on spoke wrenches in sizes 5.65 and 6.95 mm
• Push-on ratchet ¼"
• Ratchet attachments: 6, 8, 10 mm socket wrench, 15 Torx

• Highest quality workmanship
• Including straps

• It withstands a load of 180 kg.
• The total length is approx.200 cm, folded approx.100 cm.

• Practical help when loading the bike or jacking up with the rear wheel lifting device

• Prevents dirty grips

• Enables secure fastening of the machine
• Protects handlebar and tank from scratches
• Made from durable ballistic nylon
• Load capacity of 280 kg
• With handlebar loops

• Enables secure fastening of the machine
• Protects handlebar and tank from scratches
• Made from durable ballistic nylon
• Load capacity of 280 kg
• With handlebar loops

• Enables secure fastening of the machine
• Protects handlebar and tank from scratches
• Made from durable ballistic nylon
• Load capacity of 280 kg
• With handlebar loops
• With rubberized hooks and carabiner on belt ends

• To display the most important information to the driver

• Transparent plastic canister including a flexible hose and screw cap
• For legal reasons, not to be used in some countries for storage and transportation of gasoline

• Protects the motorcycle from dust, scratches and the like
• The indoor bike cover makes every KTM an eye-catcher in the garage
• Completely dust and dirt-impermeable fabric
• Material with special structure
• The inside is softly padded

• Guaranteed perfect protection in all seasons
• Made of exclusive, pigmented fabric
• Includes practical carrying bag
• Protects the motorcycle from dust, scratches and the like

• Guaranteed perfect protection in all seasons
• Made of exclusive, pigmented fabric
• Includes practical carrying bag
• Protects the motorcycle from dust, scratches and the like

• This mat is already mandatory for many races
• The special material mix absorbs overflowing fuel
• The mat also facilitates the retrieval of tools, screws and other small parts during service work
• The special KTM design will cause a sensation in your service zone
• Complies with FIM regulations
• Rubberized back

• Size: 100 x 170 cm

• This mat is already mandatory for many races
• The special material mix absorbs overflowing fuel
• The mat also facilitates the retrieval of tools, screws and other small parts during service work
• The special KTM design will cause a sensation in your service zone
• Rubberized back

• Provides optimum protection

• Made from high-tensile, durable steel
• Highest quality workmanship

• Double locking mechanism
• Locking cylinder with optimum protection against any attempts at manipulation
• Two keys supplied as standard
• Includes rotating PVC cover that protects the cylinder lock from dirt

• 10 pcs. cleanig towels, packed separately
• towel size 285 x 200 mm
• 70% Isopropanol
• ideal for cleaning of surfaces before application of stickers

• Extra strong film

• Made of robust material
• Pre-cut stickers

• Anodized valve caps
• With valve opener function

• Anodized valve caps