• Consistent, high-level braking performance
• Perfect dosing capacity
• Outer ring made of stainless high-performance brake steel

• Approvals: ABE
• Diameter: 240 mm
• Material (PowerParts): Stainless steel
• Alignment: Rear

• With return valve
• Anodised dust protection cap
• Quick and easy bleeding of the brake

• Approvals: HOMNN_EU
• Colour: Orange
• Material (PowerParts): Aluminium
• Alignment: Front

• Made of high-quality carbon
• High stiffness and strength
• Specially reinforced at points at risk of grinding
• Perfect fit

• Approvals: HOMNN_EU
• Material (PowerParts): Carbon

• Made of high-quality carbon
• High stiffness and strength
• Specially reinforced at points at risk of grinding
• Perfect fit

• Approvals: HOMNN_EU
• Material (PowerParts): Carbon
• Alignment: Left

• Significantly longer durability
• Teeth made of high-strength steel, for an extra long service life
• Extremely low-wear
• Recommended for long journeys

• Approvals: HOMNN_EU
• Colour: Black
• Material (PowerParts): Steel
• Number Of Teeth: 49 teeth

• Teeth made of high-strength steel, for an extra long service life
• Aluminum center section, reduces unsprung masses
• Permanently joined together with high-strength rivets
• At least three times longer service life than other aluminum rear sprockets
• 50 % lighter than steel rear sprockets
• Longer service life of the entire drivetrain kit

• Approvals: HOMNN_EU
• Colour: Black
• Surface (PowerParts): Anodized
• Material (PowerParts): Aluminium
• Number Of Teeth: 46 teeth

• Teeth made of high-strength steel, for an extra long service life
• Aluminum center section, reduces unsprung masses
• Permanently joined together with high-strength rivets
• At least three times longer service life than other aluminum rear sprockets
• 50 % lighter than steel rear sprockets
• Longer service life of the entire drivetrain kit

• Approvals: HOMNN_EU
• Colour: Black
• Factory Racing: USED BY FACTORY RACING
• Surface (PowerParts): Anodized
• Material (PowerParts): Aluminium
• Number Of Teeth: 50 teeth

• Teeth made of high-strength steel, for an extra long service life
• Aluminum center section, reduces unsprung masses
• Permanently joined together with high-strength rivets
• At least three times longer service life than other aluminum rear sprockets
• 50 % lighter than steel rear sprockets
• Longer service life of the entire drivetrain kit

• Approvals: HOMNN_EU
• Colour: Black
• Surface (PowerParts): Anodized
• Material (PowerParts): Aluminium
• Number Of Teeth: 41 teeth

• Secure stand for your bike
• Specifically for soft surfaces such as sand

• Approvals: HOMNN_EU
• Material (PowerParts): Aluminium

• 25 mm lower seat height
• No restrictions on riding dynamics
• Developed together with the vehicle

• Approvals: ABE
• Height (PowerParts): -25

• CNC milled from high-strength aluminum
• Elegant anodised surface

• Approvals: HOMNN_EU
• Colour: Orange
• Surface (PowerParts): Anodized
• Material (PowerParts): Aluminium
• Alignment: Front

• CNC milled from high-strength aluminum
• Elegant anodised surface

• Approvals: HOMNN_EU
• Colour: Orange
• Surface (PowerParts): Anodized
• Material (PowerParts): Aluminium
• Alignment: Rear

• CNC milled from high-strength aluminum
• Elegant anodised surface

• Approvals: HOMNN_EU
• Colour: Black
• Factory Racing: USED BY FACTORY RACING
• Surface (PowerParts): Anodized
• Material (PowerParts): Aluminium

• CNC milled from high-strength aluminum
• Elegant anodised surface

• Approvals: HOMNN_EU
• Colour: Orange
• Factory Racing: USED BY FACTORY RACING
• Surface (PowerParts): Anodized
• Material (PowerParts): Aluminium
• Weight: 0.031

• CNC milled from high-strength aluminum
• Elegant anodised surface

• Approvals: HOMNN_EU
• Colour: Orange
• Surface (PowerParts): Anodized
• Material (PowerParts): Aluminium

• High stiffness and strength
• Extremely light
• Extremely durable
• Low thermal expansion
• High long-term temperature stability
• Maximum protection against falls, flying stones, branches, etc.
• Protects against heat and unwanted contact

• Approvals: HOMNN_EU
• Surface (PowerParts): Glossy finish
• Material (PowerParts): Carbon

• No new engine flashing necessary
• Sporty sound
• Noble material mix of titanium and carbon fiber
• Highest quality workmanship
• Plug & Play mounting

• Approvals: EC
• Material (PowerParts): Carbon

• Uncompromising race look without disruptive passenger footpegs
• Mounting at the mounting points of the passenger footpegs
• Extremely torsion-resistant
• Made from high-tensile, durable steel

• Approvals: HOMNN_EU
• Colour: Black
• Material (PowerParts): Steel

• Coated neoprene ring
• Simply pulled over the grips

• Approvals: HOMNN_EU
• Colour: Orange

• Warm hands, no matter what the weather
• Grip temperature adjustable in 4 steps
• High vibration absorption
• Safe and comfortable grip
• Maximum wear resistance and durability
• Raised keys for use with gloved hands
• Waterproof switch

• Approvals: HOMNN_EU
• Colour: Black

This handguard set has been specially developed for your motorcycle and is an essential accessory for heavy-duty offroad and Supermoto sessions. The broad, generous proportions, combined with the robust aluminum external frame ensure good mobility together with maximum protection in the event of a collision, stones thrown up from the road, branches etc.

• Approvals: HOMNN_EU
• Colour: Black
• Material (PowerParts): Aluminium

• Excellent weather protection
• Maximum protection against falls, flying stones, branches, etc.
• Indispensable companion for heavy off-road and Supermoto use
• Wide, generous design in combination with sturdy aluminum bracket
• Prevents broken levers
• Made of robust plastic

• Approvals: HOMNN_EU
• Colour: Black
• Material (PowerParts): Aluminium

• Excellent weather protection
• Maximum protection against falls, flying stones, branches, etc.
• Indispensable companion for heavy off-road and Supermoto use
• Wide, generous design in combination with sturdy aluminum bracket
• Prevents broken levers
• Made of robust plastic

• Approvals: HOMNN_EU
• Colour: Ceramic white
• Material (PowerParts): Aluminium

• Extremely sturdy aluminum brackets
• Prevents broken levers
• Including all required assembly materials

• Approvals: HOMNN_EU
• Material (PowerParts): Aluminium

• CNC milled handlebar mount with damping rubber inserts
• Gentle on wrists and shoulder joints
• Damping of hard shocks
• Absorption of chassis and engine vibrations
• Additional handlebar damping in horizontal direction
• Optimum steering precision
• Further dampers available in three different degrees of hardness (soft, medium, hard) for individual adjustment

• Handlebar height adjustable to 2 positions

• Approvals: EC-V
• Surface (PowerParts): Anodized
• Material (PowerParts): Aluminium

• Approvals: CCCUO_EU

• Conversion kit for stylish, modern LED turn signals
• Increased safety due to extremely bright flashing light
• Integrate perfectly into the vehicle design

• Approvals: ECE

• Easily accessible
• Mounting material included in scope of supply
• With protective cover
• Output voltage 5 V/1,000 mA

• Approvals: HOMNN_EU

• CNC milled from high-strength aluminum
• Elegant anodised surface
• Modern, subtle, and timeless design
• Adjustable handle
• Ball joint, for flexible adjustment of the rear mirror
• Suitable for the left and right side
• Mirror body very thin, light and without edge
• Glassless mirror - aluminium itself is the mirror surface

• 180 mm stem

• Approvals: ECE
• Colour: Black
• Surface (PowerParts): Anodized
• Material (PowerParts): Aluminium

• CNC milled from high-strength aluminum
• Elegant anodised surface
• Modern, subtle, and timeless design
• Ball joint, for flexible adjustment of the rear mirror
• Adjustable handle

• Approvals: ECE
• Colour: Black
• Surface (PowerParts): Anodized

• CNC milled from high-strength aluminum
• Elegant anodised surface
• Modern, subtle, and timeless design
• Adjustable handle
• Ball joint, for flexible adjustment of the rear mirror
• Suitable for the left and right side
• Glassless mirror - aluminium itself is the mirror surface
• Mirror body very thin, light and without edge

• 180 mm stem

• Approvals: ECE
• Colour: Black
• Surface (PowerParts): Anodized
• Material (PowerParts): Aluminium

• CNC milled from high-strength aluminum
• Elegant anodised surface

• Improves your rear view.
• The mirror extension is mounted simply between the original mirror and mirror bracket.
• Length: 40mm

• Approvals: CCCUO_EU
• Colour: Black
• Surface (PowerParts): Anodized
• Material (PowerParts): Aluminium

• Robust and waterproof bag
• Waterproof roll closure
• Welded seams
• Ideal combination of quality and all-round usability
• Including all required assembly materials

• Approvals: HOMNN_EU
• Colour: Black
• Diameter: 32 cm
• Width: 61
• Volume: 51

• Offers more comfort to the passenger

• Approvals: HOMNN_EU

• Offers more comfort to the passenger

• Approvals: HOMNN_EU

• Accommodates two integral helmets
• Practical snap-fit closing
• Combination lock to open the cover and unlock the fastening
• Easy handling and operation
• Mounting material included in scope of supply
• Practical companion for national and international trips
• Sufficient storage space for a big vacation tour
• Bezels painted in vehicle color

• Dimensions 610 mm x 460 mm x 310 mm

• Approvals: HOMNN_EU
• Colour: Black
• Volume: 48

• Accommodates two integral helmets
• Practical snap-fit closing
• Combination lock to open the cover and unlock the fastening
• Easy handling and operation
• Mounting material included in scope of supply
• Practical companion for national and international trips
• Sufficient storage space for a big vacation tour
• Bezels painted in vehicle color

• Dimensions 610 mm x 460 mm x 310 mm

• Approvals: HOMNN_EU
• Colour: Black
• Surface (PowerParts): Matte finish
• Volume: 48

• Accommodates two integral helmets
• Practical snap-fit closing
• Combination lock to open the cover and unlock the fastening
• Easy handling and operation
• Mounting material included in scope of supply
• Practical companion for national and international trips
• Sufficient storage space for a big vacation tour
• Bezels painted in vehicle color

• Dimensions 610 mm x 460 mm x 310 mm

• Approvals: HOMNN_EU
• Colour: Black
• Volume: 48

• Accommodates two integral helmets
• Practical snap-fit closing
• Combination lock to open the cover and unlock the fastening
• Easy handling and operation
• Mounting material included in scope of supply
• Practical companion for national and international trips
• Sufficient storage space for a big vacation tour
• KTM logo included

• The height of the top case can be fixed at three different positions. The capacity will be: 46L / 52L / 58L

• Approvals: HOMNN_EU
• Colour: Black
• Volume: 58

• For waterproof storage of documents, maps, cellphones, navigation devices etc.

• Approvals: HOMNN_EU
• Colour: Black

• Universally applicable for mounting the GPS bracket

• Approvals: HOMNN_EU
• Material (PowerParts): Aluminium

• Smartphone can be easily removed with its cover
• Protects your valuable smartphone
• Optimal solution for quick and secure fastening of your smartphone on the vehicle

• Approvals: HOMNN_EU
• Colour: Black
• Smartphone: IPhone 11 PRO

• Protects your valuable smartphone
• Optimal solution for quick and secure fastening of your smartphone on the vehicle
• Smartphone can be easily removed with its cover

Including a magnetic ring, so the case is also "MagSafe" compatible.

Extremely slim design, 40% thinner compared to the previous smartphone case generation.

• Approvals: HOMNN_EU
• Colour: Black
• Smartphone: IPhone14

• Optimal solution for quick and secure fastening of your smartphone on the vehicle
• Smartphone can be easily removed with its cover
• Protects your valuable smartphone

Including a magnetic ring, so the case is also "MagSafe" compatible.

Extremely slim design, 40% thinner compared to the previous smartphone case generation.

• Approvals: HOMNN_EU
• Colour: Black
• Smartphone: IPhone 16

• Smartphone can be easily removed with its cover
• Protects your valuable smartphone
• Optimal solution for quick and secure fastening of your smartphone on the vehicle

• Approvals: HOMNN_EU
• Colour: Black
• Smartphone: HUAWEI Mate 20 Pro

• Optimal solution for quick and secure fastening of your smartphone on the vehicle

New "SPC+" mounting system, but there is also an adapter included to mount this universal adapter also on the previous mounting system

Dimensions: 66x55mm (2.6x2.17 inch).

• Approvals: HOMNN_EU

• Protects your valuable smartphone from rain, dust or mud
• Touchscreen remains fully functional
• Optimal solution for quick and secure fastening of your smartphone on the vehicle

• Approvals: HOMNN_EU
• Smartphone: 153 x 70 mm

• Optimal solution for quick and secure fastening of your smartphone on the vehicle
• Protects your valuable smartphone from rain, dust or mud
• Touchscreen remains fully functional

• Approvals: HOMNN_EU
• Smartphone: 153 x 70 mm

• Optimal solution for quick and secure fastening of your smartphone on the vehicle
• Protects your valuable smartphone from rain, dust or mud
• Touchscreen remains fully functional

• Approvals: HOMNN_EU
• Smartphone: 165 x 80 mm

• Optimal solution for quick and secure fastening of your smartphone on the vehicle
• Universal and inconspicuous bracket for your smartphone

Includes also a anti vibration module which decouples the smartphone from the smartphone bracket respectively the motorcycle with a specific developed elastomer inlay.
It reduces the transfer of vibrations, generated by the motorcycle, to the smartphone and protects it`s sensitive components.

New "SPC+" mounting system.
In addition, this version also includes the new technologie "Mag-Align", which makes it easier to position the smartphone correctly on the bracket.

• Approvals: HOMNN_EU
• Colour: Black
• Surface (PowerParts): Anodized
• Material (PowerParts): Aluminium

• Smartphone can be easily removed with its cover
• Protects your valuable smartphone
• Optimal solution for quick and secure fastening of your smartphone on the vehicle

• Approvals: HOMNN_EU
• Colour: Black
• Smartphone: IPhone XR

• Smartphone can be easily removed with its cover
• Protects your valuable smartphone
• Optimal solution for quick and secure fastening of your smartphone on the vehicle

• Approvals: HOMNN_EU
• Colour: Black
• Smartphone: Samsung Galaxy S20

• Smartphone can be easily removed with its cover
• Protects your valuable smartphone
• Optimal solution for quick and secure fastening of your smartphone on the vehicle

• Approvals: HOMNN_EU
• Colour: Black
• Smartphone: Samsung Galaxy S20+

• Smartphone can be easily removed with its cover
• Protects your valuable smartphone
• Optimal solution for quick and secure fastening of your smartphone on the vehicle

• Approvals: HOMNN_EU
• Colour: Black
• Smartphone: Samsung Galaxy S8+/S9+

• Fast and easy inductive charging of the smartphone during the ride
• Can be mounted on the SPC+ smartphone bracket and smartphone adapter
• Including waterproof USB-A charging cable, only this cable shall be used for the connection with the bike
• Dimensions: 60 mm (diameter) x 12 mm (height)

• Approvals: HOMNN_EU
• Not Available In: Japan

• Easily accessible and within the rider's field of vision

• Fast and easy inductive charging of the smartphone during the ride
• Can be mounted on the SPC+ smartphone bracket and smartphone adapter
• Including waterproof USB-C charging cable, only this cable shall be used for the connection with the bike
• Dimensions: 60 mm (diameter) x 12 mm (height)

• Approvals: HOMNN_EU
• Not Available In: Japan

• Optimal solution for quick and secure fastening of your smartphone on the vehicle

• Dimensions: 66x55mm (2.6x2.17 inch)

• Approvals: HOMNN_EU

• Plug & Play mounting

• Wiring harness ready for fitting
• Fail-safe, dual-circuit immobiliser
• Integrated microchip motion sensor
• Two watertight, anti-scan radio transmitters with rolling code
• An additional mounting kit is required for installation
• Thatcham homologated (strictest European test method)

• Approvals: CE
• Not Available In: Japan

• Approvals: HOMNN_EU
• Not Available In: Japan

• Plastic-coated tubular steel brackets
• Extremely resistant fastening system
• Exceptionally robust
• Perfectly integrated into the motorcycle
• Provides optimum protection

• Approvals: HOMNN_EU
• Colour: Black
• Surface (PowerParts): Powder-coated
• Material (PowerParts): Steel

• Easy to mount
• Protects from damage in the event of a fall

• Approvals: HOMNN_EU
• Colour: Black
• Alignment: Front

• Easy to mount
• Protects from damage in the event of a fall

• Approvals: HOMNN_EU
• Colour: Black
• Alignment: Rear

• Protects from damage in the event of a fall
• Easy to mount
• Plug & Play mounting
• Elegant anodised surface
• CNC milled from high-strength aluminum
• High-quality look
• Perfect fit

• Approvals: HOMNN_EU
• Colour: Black
• Surface (PowerParts): Anodized
• Material (PowerParts): Aluminium
• Alignment: Rear

• Protects from damage in the event of a fall
• Easy to mount
• Plug & Play mounting
• Elegant anodised surface
• CNC milled from high-strength aluminum
• High-quality look
• Perfect fit

• Approvals: HOMNN_EU
• Colour: Orange
• Surface (PowerParts): Anodized
• Material (PowerParts): Aluminium
• Alignment: Rear

• Protects from damage in the event of a fall
• Easy to mount
• Plug & Play mounting
• Elegant anodised surface
• CNC milled from high-strength aluminum
• High-quality look
• Perfect fit

• Approvals: HOMNN_EU
• Colour: Orange
• Surface (PowerParts): Anodized
• Material (PowerParts): Aluminium
• Alignment: Front

• Protects from damage in the event of a fall
• Easy to mount
• Plug & Play mounting
• Elegant anodised surface
• CNC milled from high-strength aluminum
• High-quality look
• Perfect fit

• Approvals: HOMNN_EU
• Colour: Black
• Surface (PowerParts): Anodized
• Material (PowerParts): Aluminium
• Alignment: Front

• Protects the passenger footpegs from damage in the event of a fall

• Approvals: HOMNN_EU
• Colour: Black

• Protects the fork shoes from damage
• Easy to mount

• Approvals: HOMNN_EU
• Colour: Black

• CNC milled from high-strength aluminum
• Elegant anodised surface
• Screwed directly to the brake caliper
• Safety bolt made of high-strength steel engages directly in the drill hole of the brake disc
• It is not possible to move the vehicle when it is locked
• No disassembly possible in locked state 

• Approvals: HOMNN_EU
• Colour: Orange
• Surface (PowerParts): Anodized
• Material (PowerParts): Aluminium

• CNC milled from high-strength aluminum
• Elegant anodised surface
• Screwed directly to the brake caliper
• Safety bolt made of high-strength steel engages directly in the drill hole of the brake disc
• It is not possible to move the vehicle when it is locked
• No disassembly possible in locked state 

• Approvals: HOMNN_EU
• Colour: Black
• Surface (PowerParts): Anodized
• Material (PowerParts): Aluminium

• Excellent protection for the engine housing and the header
• Highest quality workmanship

• Approvals: HOMNN_EU
• Colour: Orange
• Surface (PowerParts): Anodized
• Material (PowerParts): Aluminium

• Silencer bracket 76005984044
• Akrapovič slip-on silencer 76005999000 / Akrapovic Evolution complete system 76005999500 / Tuning kit 76012945000

• Approvals: HOMNN_EU
• Colour: White

• For tank and carburetor bleeding
• Gasoline resistant
• Can only be used for bleeding purposes
• Cannot be used as a connection between tank and carburetor!

• Approvals: HOMNN_EU
• Colour: Orange

• Support adapters are clamped into the rear wheel lifting device
• Practical help when loading the bike or jacking up with the rear wheel lifting device

• Approvals: HOMNN_EU
• Type: Recommended

• These support adapters give your motorcycle an even firmer standing position

• Approvals: HOMNN_EU
• Colour: Black
• Type: Recommended

• Secure stand for your bike
• Made of high-strength aluminum

• Approvals: HOMNN_EU
• Surface (PowerParts): Anodized
• Material (PowerParts): Aluminium

• Secure stand for your bike
• Made of high-strength aluminum
• Predefined predetermined breaking point

• Approvals: HOMNN_EU
• Colour: Orange
• Surface (PowerParts): Anodized
• Material (PowerParts): Aluminium

• Tool for lifting the motorcycle at the rear axle
• Secure stand for your bike

• Approvals: HOMNN_EU
• Colour: Orange
• Material (PowerParts): Steel
• Type: Recommended

• Tool for lifting the motorcycle at the rear axle
• Secure stand for your bike

• Approvals: HOMNN_EU
• Colour: Black
• Surface (PowerParts): Powder-coated
• Material (PowerParts): Steel

• Sturdy tubular steel construction
• Tool for lifting the motorcycle at the triple clamp
• Makes removal of the front wheel easier

• Approvals: HOMNN_EU
• Colour: Orange
• Surface (PowerParts): Powder-coated
• Material (PowerParts): Steel
• Type: Recommended

• Sturdy tubular steel construction
• Tool for lifting the motorcycle at the triple clamp
• Makes removal of the front wheel easier

• Approvals: HOMNN_EU
• Colour: Black
• Surface (PowerParts): Powder-coated
• Material (PowerParts): Steel

• Approvals: HOMNN_EU
• Diameter: 14 mm
• Type: Recommended
• Technical Details: Diameter: 14 mm (0.55 in)

• Support adapters are clamped into the rear wheel lifting device
• Tool for lifting the motorcycle at the rear axle
• Secure stand for your bike

• Approvals: HOMNN_EU
• Type: Recommended

• Practical companion for national and international trips
• Convenient and easy to use
• Extremely low weight

• Approvals: HOMNN_EU
• Colour: Black
• Weight: 0.33

• Testing, charging and keeping batteries fresh
• Fully automatic and economical battery charging by means of programmed charge characteristic
• Short-circuit protection
• Reverse polarity protection

• Can be used for several types of batteries (Pb, LiFePo4)
• Charging with a specific power control program
• Trickle charge during diagnostic or flashing the vehicle
• Recovery mode for low battery voltage (BMS, battery management system)
• Optimizes battery performance and service life
• Including power supply cable type EU

• Approvals: HOMNN_EU
• Not Available In: Vereinigte Arabische Emirate

• Approvals: HOMNN_EU
• Colour: Orange
• Material (PowerParts): Plastic

• Easy handling and operation
• More safety
• Less wear on the cord
• Made of high quality material
• Cable not included

• Approvals: HOMNN_EU
• Colour: Black
• Diameter: 400 mm

• Approvals: HOMNN_EU
• Chain Pitch: 520

• 3 x short version 51012092100
• 3 x long version 51012093100

• Approvals: HOMNN_EU
• Colour: Black
• Material (PowerParts): Steel

• Approvals: HOMNN_EU
• Colour: Transparent
• Material (PowerParts): Plastic
• Volume: 1

• Use this to remove the dirt from your last mud battle with ease!
• A motorcycle grip rubber (not included) can be fitted to the grip.

• Approvals: HOMNN_EU
• Colour: Black
• Material (PowerParts): Plastic

• Approvals: HOMNN_EU
• Diameter: 0,61 mm

• Approvals: HOMNN_EU
• Colour: Black

• Approvals: HOMNN_EU
• Colour: Orange
• Material (PowerParts): Plastic

- Push-on spoke wrenches in sizes 5.65 and 6.95 mm
- Push-on ratchet ¼"
- Ratchet attachments: 6, 8, 10 mm socket wrench, 15 Torx

• Approvals: HOMNN_EU

• Approvals: HOMNN_EU
• Colour: Orange
• Material (PowerParts): Plastic

• Keeps water out of the silencer during cleaning.
• For inner-diameter of 22-42 mm

• Approvals: HOMNN_EU
• Colour: Black
• Material (PowerParts): Plastic

• Comfortable and easy to use
• Fits all standard valves. Pressure display in bar or psi
• Integrated pressure release valve for accurate pressure adjustment
• Disengageable display and work area lighting
• Energy-saving function with automatic cut-off
• Maximum measuring pressure: 11 bar

• Approvals: HOMNN_EU
• Colour: Black

• Approvals: HOMNN_EU

The benefits of the KTM tyre warmer

• Optimum tyre temperature achieved in just 30 min
• LED for monitoring tyre warming
• Turns off automatically when the temperature reaches 78 °C to 80 °C
• Special fire-proof internal insulation in pure aramid fiber for maximum energy efficiency
• External cable and plug made of special rubber, resistant to grease and oil (max temp. 200 °C)
• Manufactured from robust nylon, with silicone surface finish for protection against acid and dirt
• Completely waterproof (inside and out), so safe and reliable in the rain as well
• CE-certified230 V , 50 - 60 Hz, Euro plug
• Fits tire sizes up to max. 160/60 - 17

• Approvals: CE
• Colour: Black

• Approvals: HOMNN_EU

• Highest quality workmanship
• Including straps

• It withstands a load of 180 kg.
• The total length is approx.200 cm, folded approx.100 cm.

• Approvals: HOMNN_EU
• Material (PowerParts): Aluminium
• Weight: 5.5

• Practical help when loading the bike or jacking up with the rear wheel lifting device

• Approvals: HOMNN_EU

• Prevents dirty grips

• Approvals: HOMNN_EU

• Protects the motorcycle from dust, scratches and the like
• The indoor bike cover makes every KTM an eye-catcher in the garage
• Completely dust and dirt-impermeable fabric
• Material with special structure
• The inside is softly padded

• Approvals: HOMNN_EU
• Colour: Orange

• Guaranteed perfect protection in all seasons
• Made of exclusive, pigmented fabric
• Includes practical carrying bag
• Protects the motorcycle from dust, scratches and the like

• Approvals: HOMNN_EU
• Colour: Orange

• Guaranteed perfect protection in all seasons
• Made of exclusive, pigmented fabric
• Includes practical carrying bag
• Protects the motorcycle from dust, scratches and the like

• Approvals: HOMNN_EU
• Colour: Orange

• This mat is already mandatory for many races
• Complies with FIM regulations
• The special material mix absorbs overflowing fuel
• The mat also facilitates the retrieval of tools, screws and other small parts during service work
• Rubberised back

• Size: 170 cm x 100 cm

• Approvals: HOMNN_EU
• Type: Kein Fahrzeug

• This mat is already mandatory for many races
• The special material mix absorbs overflowing fuel
• The mat also facilitates the retrieval of tools, screws and other small parts during service work
• Complies with FIM regulations
• Rubberised back

• Approvals: HOMNN_EU

• Enables secure fastening of the machine
• Protects handlebar and tank from scratches
• Made from durable ballistic nylon
• Load capacity of 280 kg
• With handlebar loops
• With rubberised hooks and carabiner on belt ends

• Approvals: HOMNN_EU
• Colour: Black

• Provides optimum protection

• Approvals: HOMNN_EU

• Provides optimum protection

• Approvals: HOMNN_EU

• Made from high-tensile, durable steel
• Highest quality workmanship

• Double locking mechanism
• Locking cylinder with optimum protection against any attempts at manipulation
• Two keys supplied as standard
• Includes rotating PVC cover that protects the cylinder lock from dirt

• Approvals: HOMNN_EU
• Material (PowerParts): Steel

• Approvals: HOMNN_EU
• Start Number: 0

• Approvals: HOMNN_EU
• Start Number: 0

• Made of robust material
• Pre-cut stickers

• Approvals: HOMNN_EU
• Type: Kein Fahrzeug

• Designed to completely change the original look of your motorcycle
• Glue the graphics kit directly onto the standard fairing parts
• Can be removed without leaving any residue
• Made of the highest quality materials
• Perfect fit
• Personalise the look of your motorcycle

• Approvals: HOMNN_EU

• Perfect fit
• No unattractive scratches or matte areas caused by the zipper of the jacket or leathers
• Extra strong film

• Approvals: HOMNN_EU
• Colour: Transparent

• Extra strong film

• Approvals: HOMNN_EU
• Type: Kein Fahrzeug

• Optimal basis for graphics kits
• Perfect fit

• Approvals: HOMNN_EU
• Colour: Black
• Material (PowerParts): Plastic
• Alignment: Front

• Optimal basis for graphics kits
• Perfect fit

• Approvals: HOMNN_EU
• Colour: White
• Material (PowerParts): Plastic
• Alignment: Front

• Optimal basis for graphics kits
• Perfect fit

• Approvals: HOMNN_EU
• Colour: White
• Material (PowerParts): Plastic
• Alignment: Left

• Optimal basis for graphics kits
• Perfect fit

• Approvals: HOMNN_EU
• Colour: Black
• Material (PowerParts): Plastic
• Alignment: Right

• Optimal basis for graphics kits
• Perfect fit

• Approvals: HOMNN_EU
• Colour: Black
• Material (PowerParts): Plastic
• Alignment: Left

• Optimal basis for graphics kits
• Perfect fit

• Approvals: HOMNN_EU
• Colour: White
• Material (PowerParts): Plastic
• Alignment: Right

• Optimal basis for graphics kits
• Perfect fit

• Approvals: HOMNN_EU
• Colour: White
• Material (PowerParts): Plastic

• Optimal basis for graphics kits
• Perfect fit

• Approvals: HOMNN_EU
• Colour: Black
• Material (PowerParts): Plastic

• Optimal basis for graphics kits
• Perfect fit

• Approvals: HOMNN_EU
• Colour: Electronic orange
• Material (PowerParts): Plastic

• Shortened design of the license plate holder support
• Perfectly integrated into the motorcycle

• Approvals: CCCUO_EU
• Colour: Black
• Surface (PowerParts): Powder-coated
• Material (PowerParts): Steel
• Not Available In: Japan

• Approvals: HOMNN_EU
• Colour: Electronic orange
• Material (PowerParts): Plastic
• Alignment: Left

• Approvals: HOMNN_EU
• Colour: Electronic orange
• Material (PowerParts): Plastic
• Alignment: Right

• Elegant look

• Approvals: HOMNN_EU
• Colour: Silver
• Material (PowerParts): Aluminium
• Type: Kein Fahrzeug

• Anodised valve caps

• Approvals: HOMNN_EU
• Colour: Orange
• Surface (PowerParts): Anodized
• Material (PowerParts): Aluminium

• Pre-cut stickers
• Suitable for front and rear wheel rim

• Approvals: HOMNN_EU
• Wheel Size: 17

• 220 Volt
• For all WP-shocks
• Two 3 litre tanks
• Fill two different shocks at the same time
• Programmable filling cycle time
• Two filling presets
• Intuitive control via a 4.3" LCD screen
• Low oil warning
• Vacuum 42L/min
• Max. vacuum -0,98 bar
• Adjustable pressure 1,5-3 bar
• Incl. 2 WP-adapters

• Approvals: HOMNN_EU
• Type: Kein Fahrzeug