FREERIDE 250 F (2018) POWERPARTS & ACCESSORIES

72006920003

Lagerstatus: 2
Pris: 115kr
PowerParts|Air filter
Air filter dust protection
This large-pored air filter cover acts as an additional protective layer, hence extending the filter service interval. Recommended in extremely dusty conditions.
  • pre-oiled
This large-pored air filter cover acts as an additional protective layer, hence extending the filter service interval. Recommended in extremely dusty conditions.<br /><ul><li class="li-square">pre-oiled</li></ul> dölj mer info

72005979000

Lagerstatus: hos lev.
Pris: 11490kr
PowerParts|Archive
Akrapovi? "Slip-on Line"
These slip-on factory silencers have been developed in collaboration with Akrapovi? for the extreme requirements of enduring offroad use and specially tuned to the KTM characteristics.
The benefits:
  • Improved torque curve combined with very rideable peak performance
  • More sensitive throttle response and resulting improved traction
  • Durability suitable for extreme enduro use
  • Made from titanium - that means: ultra-light
  • Welded on brackets
  • Carbon end cap
Can only be fitted in combination with original header.
These slip-on factory silencers have been developed in collaboration with Akrapovi? for the extreme requirements of enduring offroad use and specially tuned to the KTM characteristics.<br />The benefits:<ul><li class="li-disc">Improved torque curve combined with very rideable peak performance</li><li class="li-disc">More sensitive throttle response and resulting improved traction</li><li class="li-disc">Durability suitable for extreme enduro use</li><li class="li-disc">Made from titanium - that means: ultra-light</li><li class="li-disc">Welded on brackets</li><li class="li-disc">Carbon end cap</li></ul>Can only be fitted in combination with original header. dölj mer info

79010965118EB

Lagerstatus: 3
Pris: 1150kr
PowerParts|Archive
Chain
Sometimes less can mean more! O and Z-rings have been dispensed with completely on this chain specially developed for motocross use. That and the special construction of the bearing bushes result in the perfect compromise between durability and minimum power loss.
Sometimes less can mean more! O and Z-rings have been dispensed with completely on this chain specially developed for motocross use. That and the special construction of the bearing bushes result in the perfect compromise between durability and minimum power loss. dölj mer info

7201390214404

Lagerstatus: hos lev.
Pris: 1150kr
PowerParts|Archive
Flex brake lever
Ever had to give up during a race because of a broken clutch or brake lever? That will never happen again - these levers are designed to fold away on contact with the ground. For the right brake armature on the Freeride E.
Ever had to give up during a race because of a broken clutch or brake lever? That will never happen again - these levers are designed to fold away on contact with the ground. For the right brake armature on the Freeride E. dölj mer info

7200293114404

Lagerstatus: hos lev.
Pris: 1150kr
PowerParts|Archive
Flex clutch lever
Ever had to give up during a race because of a broken clutch or brake lever? That will never happen again - these levers are designed to fold away on contact with the ground. For the left brake armature on the Freeride E.
Ever had to give up during a race because of a broken clutch or brake lever? That will never happen again - these levers are designed to fold away on contact with the ground. For the left brake armature on the Freeride E. dölj mer info

77512950200

Lagerstatus: 2
Pris: 450kr
PowerParts|Archive
Lashing strap set
2x high quality tie-downs with rubberized fastening hooks and handlebar loops. In the KTM colors orange/black and featuring the KTM logo.
2x high quality tie-downs with rubberized fastening hooks and handlebar loops. In the KTM colors orange/black and featuring the KTM logo. dölj mer info

77512950200

Lagerstatus: 2
Pris: 450kr
PowerParts|Archive
Lashing strap set
With KTM tie downs, any bike can be easily secured without scratching the handlebar. The extra wide straps (38 mm) are equipped with a rubberized hook and loop at one end and a carabiner at the other. In the KTM colors orange/black, complete with KTM logo.
With KTM tie downs, any bike can be easily secured without scratching the handlebar. The extra wide straps (38 mm) are equipped with a rubberized hook and loop at one end and a carabiner at the other. In the KTM colors orange/black, complete with KTM logo. dölj mer info

79111053000

Lagerstatus: 23
Pris: 1020kr
PowerParts|Archive
Lithium ion battery

The following benefits are the mark of our lithium-ion batteries:

  • 1 kg lighter than the standard battery 77311053000
  • 1.6 kg lighter than the standard battery 58511053000
  • Unbeatable cost/weight saving ratio
  • Mountable in any position, as it does not contains acid
  • Safe technology and long life

Technical data:

  • 12 V maintenance-free LiFePo4-battery
  • Capacity 1.2 Ah
  • Recommended charging current - 2.5 amps
  • Maximum charge current for fast charging - 12 amps
  • Fast charge with high charging current (up to 90% in 6 min)
  • Very low self-discharge (max. 5% per month)
  • Balanced discharge/charge of all cells through balancer
  • Contains no heavy metals

When mounting on 125 SX and SX-F models from 2016 onwards, the battery compartment 790.11.955.044 is also required.

<p>The following benefits are the mark of our lithium-ion batteries:</p><ul><li class="li-disc">1 kg lighter than the standard battery 77311053000</li><li class="li-disc">1.6 kg lighter than the standard battery 58511053000</li><li class="li-disc">Unbeatable cost/weight saving ratio</li><li class="li-disc">Mountable in any position, as it does not contains acid</li><li class="li-disc">Safe technology and long life</li></ul><p>Technical data:</p><ul><li class="li-disc">12 V maintenance-free LiFePo4-battery</li><li class="li-disc">Capacity 1.2 Ah</li><li class="li-disc">Recommended charging current - 2.5 amps</li><li class="li-disc">Maximum charge current for fast charging - 12 amps</li><li class="li-disc">Fast charge with high charging current (up to 90% in 6 min)</li><li class="li-disc">Very low self-discharge (max. 5% per month)</li><li class="li-disc">Balanced discharge/charge of all cells through balancer</li><li class="li-disc">Contains no heavy metals</li></ul><p>When mounting on 125 SX and SX-F models from 2016 onwards, the battery compartment 790.11.955.044 is also required.</p> dölj mer info

7811297300099

Lagerstatus: 1
Pris: 915kr
PowerParts|Archive
Plastic drum
20 liters, KTM orange plastic canister for use on the racetrack. Includes a flexible hose and screw cap. For legal reasons, not to be used in some countries for storage and transportation of gasoline.
20 liters, KTM orange plastic canister for use on the racetrack. Includes a flexible hose and screw cap. For legal reasons, not to be used in some countries for storage and transportation of gasoline. dölj mer info

5030501700004

Lagerstatus: hos lev.
Pris: 150kr
PowerParts|Archive
Spring hook
Tool for removing exhaust springs
Tool for removing exhaust springs dölj mer info

47209960000

Lagerstatus: hos lev.
Pris: 1960kr
PowerParts|Brakes|Brake discs
Wave brake disc
  • Floating brake disc manufactured from special high-grade stainless steel
  • With wave design for added braking performance
  • Minimal wear on brake linings
  • The front brake caliper mounting kit 72009960044 is required for mounting
<ul><li class="li-square">Floating brake disc manufactured from special high-grade stainless steel</li><li class="li-square">With wave design for added braking performance</li><li class="li-square">Minimal wear on brake linings</li><li class="li-square">The front brake caliper mounting kit 72009960044 is required for mounting</li></ul> dölj mer info

70010160000

Lagerstatus: hos lev.
Pris: 1060kr
PowerParts|Brakes|Brake discs
Wave brake disc
  • Manufactured from special high-grade stainless steel
  • With wave design for added braking performance
  • Minimal wear on brake linings
  • The rear brake caliper mounting kit 72010960044 is required for mounting
<ul><li class="li-square">Manufactured from special high-grade stainless steel</li><li class="li-square">With wave design for added braking performance</li><li class="li-square">Minimal wear on brake linings</li><li class="li-square">The rear brake caliper mounting kit 72010960044 is required for mounting</li></ul> dölj mer info

7251397500030

Lagerstatus: hos lev.
Pris: 1150kr
PowerParts|Brakes|Special parts
Brake caliper support
Lighter and stiffer than the standard brake calliper support. The stiffness has a positive effect on such braking properties as braking power and application. CNC-machined from highest grade aluminium and black anodised.
Options available: Brake disc guard 77713975030.
Lighter and stiffer than the standard brake calliper support. The stiffness has a positive effect on such braking properties as braking power and application. CNC-machined from highest grade aluminium and black anodised.<br />Options available: Brake disc guard 77713975030. dölj mer info

78913914100

Lagerstatus: 1
Pris: 915kr
PowerParts|Brakes|Special parts
Brake caliper support
Required for using the 270 mm brake disc 78909960000 and 2-piston Brembo brake caliper.
Required for using the 270 mm brake disc 78909960000 and 2-piston Brembo brake caliper. dölj mer info

72010961000

Lagerstatus: 1
Pris: 915kr
PowerParts|Brakes|Special parts
Brake disc guard
Protects the rear brake disc from stones and other solid objects in the event of a crash or in the heat of battle. Made of high-strength aluminum.
Protects the rear brake disc from stones and other solid objects in the event of a crash or in the heat of battle. Made of high-strength aluminum. dölj mer info

77713975030

Lagerstatus: hos lev.
Pris: 1150kr
PowerParts|Brakes|Special parts
Brake disc guard
Protects the rear brake disc from stones and other solid objects in the event of a crash or in the heat of battle. Can be fitted on the CNC brake calliper support 77713975110/30.
Protects the rear brake disc from stones and other solid objects in the event of a crash or in the heat of battle. Can be fitted on the CNC brake calliper support 77713975110/30. dölj mer info

47209961000

Lagerstatus: hos lev.
Pris: 925kr
PowerParts|Brakes|Special parts
Brake disc guard
Very practical: The intelligent fitting system with central adapter replaces the spacer sleeve on the wheel axle and allows the tire to be changed, brake to be serviced, etc., without removing the brake cover.
Very practical: The intelligent fitting system with central adapter replaces the spacer sleeve on the wheel axle and allows the tire to be changed, brake to be serviced, etc., without removing the brake cover. dölj mer info

7900199400049

Lagerstatus: hos lev.
Pris: 1380kr
PowerParts|Carbon|Offroad
Fork protector kit
  • Made of carbon
  • Optimum protection against roost
  • Made to fit all 48 mm forks
<ul><li class="li-square">Made of carbon</li><li class="li-square">Optimum protection against roost </li><li class="li-square">Made to fit all 48 mm forks</li></ul> dölj mer info

50310165118

Lagerstatus: 3
Pris: 915kr
PowerParts|Chains/rear sprockets|Chains
Chain
Sometimes less can mean more! O and Z-rings have been dispensed with completely on this chain specially developed for motocross use. That and the special construction of the bearing bushes result in the perfect compromise between durability and minimum power loss.
Sometimes less can mean more! O and Z-rings have been dispensed with completely on this chain specially developed for motocross use. That and the special construction of the bearing bushes result in the perfect compromise between durability and minimum power loss. dölj mer info

79010965118EB

Lagerstatus: 3
Pris: 1150kr
PowerParts|Chains/rear sprockets|Chains
Chain
Sometimes less can mean more! O and Z-rings have been dispensed with completely on this chain specially developed for motocross use. That and the special construction of the bearing bushes result in the perfect compromise between durability and minimum power loss.
Sometimes less can mean more! O and Z-rings have been dispensed with completely on this chain specially developed for motocross use. That and the special construction of the bearing bushes result in the perfect compromise between durability and minimum power loss. dölj mer info

78010167118

Lagerstatus: 4
Pris: 1265kr
PowerParts|Chains/rear sprockets|Chains
X-ring chain
DO YOU KNOW about the differences and benefits of a Z-ring or X-ring chain compared with an O-ring chain?
  • The Z-ring or X-ring has 4 contact points in contrast to 2 contact points with the O-ring version
  • This means higher flexibility and better running characteristics for the Z-ring or X-ring chain
  • The spring effect of the Z-ring or X-ring guarantees consistent and permanent lubrication
  • This means a significantly longer service life for the Z-ring or X-ring chain
  • The Z-ring or X-ring provides a better seal against penetration by water and dirt
DO YOU KNOW about the differences and benefits of a Z-ring or X-ring chain compared with an O-ring chain?<ul><li class="li-disc"> The Z-ring or X-ring has 4 contact points in contrast to 2 contact points with the O-ring version</li><li class="li-disc"> This means higher flexibility and better running characteristics for the Z-ring or X-ring chain</li><li class="li-disc"> The spring effect of the Z-ring or X-ring guarantees consistent and permanent lubrication </li><li class="li-disc"> This means a significantly longer service life for the Z-ring or X-ring chain </li><li class="li-disc"> The Z-ring or X-ring provides a better seal against penetration by water and dirt</li></ul> dölj mer info

7201095104604

Lagerstatus: hos lev.
Pris: 635kr
PowerParts|Chains/rear sprockets|Rear sprockets
Rear sprocket

This rear sprocket not only looks cool, it also provides the following compelling benefits:

  • Manufactured from high-strength 7075-T6 aluminium, the strongest aluminium in the world
  • The chain runs smoothly, straight as a die and true, because it's ground level to an accuracy of 0.002 mm
  • No small stones or dirt particles can become stuck under the chain thanks to angled recesses between the teeth
  • All these properties mean lower wear and extreme durability
  • Orange anodised with a permanent, organic and environmentally friendly pigment

Use of the 50T rear sprocket as of MY 14 can lead to space problems with the chainguide fitted as standard. If this is the case, then chainguide 773.04.070.310 must be used.

<p>This rear sprocket not only looks cool, it also provides the following compelling benefits:</p><ul><li class="li-square">Manufactured from high-strength 7075-T6 aluminium, the strongest aluminium in the world</li><li class="li-square">The chain runs smoothly, straight as a die and true, because it's ground level to an accuracy of 0.002 mm</li><li class="li-square">No small stones or dirt particles can become stuck under the chain thanks to angled recesses between the teeth </li><li class="li-square">All these properties mean lower wear and extreme durability</li><li class="li-square">Orange anodised with a permanent, organic and environmentally friendly pigment</li></ul><p>Use of the 50T rear sprocket as of MY 14 can lead to space problems with the chainguide fitted as standard. If this is the case, then chainguide 773.04.070.310 must be used.<br /></p> dölj mer info

7810407010004

Lagerstatus: 9
Pris: 375kr
PowerParts|Chains/rear sprockets|Special parts
Chainguide
In orange factory look.
<div class="gs01l">In orange factory look.</div> dölj mer info

70013903000

Lagerstatus: hos lev.
Pris: 290kr
PowerParts|CNC-parts, anodized|Chassis
Brake cylinder cover
DO YOU KNOW that all KTM CNC parts are manufactured from highest quality aluminum and therefore not only look good, they also withstand the toughest treatment? With the anodized aluminum components in the original factory look from the PowerParts range, you can turn your KTM into something very special.
DO YOU KNOW that all KTM CNC parts are manufactured from highest quality aluminum and therefore not only look good, they also withstand the toughest treatment? With the anodized aluminum components in the original factory look from the PowerParts range, you can turn your KTM into something very special. dölj mer info

72002903000

Lagerstatus: 3
Pris: 290kr
PowerParts|CNC-parts, anodized|Chassis
Clutch reservoir cover
DO YOU KNOW that all KTM CNC parts are manufactured from highest quality aluminum and therefore not only look good, they also withstand the toughest treatment? With the anodized aluminum components in the original factory look from the PowerParts range, you can turn your KTM into something very special.
DO YOU KNOW that all KTM CNC parts are manufactured from highest quality aluminum and therefore not only look good, they also withstand the toughest treatment? With the anodized aluminum components in the original factory look from the PowerParts range, you can turn your KTM into something very special. dölj mer info

SXS08300040

Lagerstatus: hos lev.
Pris: 450kr
PowerParts|CNC-parts, anodized|Chassis
Factory adjuster wheel set
DID YOU KNOW that all KTM CNC parts are manufactured from high grade aluminum, which not only looks great but can also stand up to the toughest loads? The original factory look, anodized aluminum PowerParts are just the thing to give your KTM that something special.
Not suitable for air forks.
DID YOU KNOW that all KTM CNC parts are manufactured from high grade aluminum, which not only looks great but can also stand up to the toughest loads? The original factory look, anodized aluminum PowerParts are just the thing to give your KTM that something special.<br />Not suitable for air forks. dölj mer info

79413951000

Lagerstatus: 2
Pris: 565kr
PowerParts|CNC-parts, anodized|Chassis
Footbrake lever step plate
Wider contact surface than standard:
  • +8 mm at 125/150 SX/XC-W, SX-F, 450/500 EXC-F
  • +16 mm at 250/300 SX/EXC, 250/350 EXC-F
Wider contact surface than standard:<ul><li class="li-square">+8 mm at 125/150 SX/XC-W, SX-F, 450/500 EXC-F</li><li class="li-square">+16 mm at 250/300 SX/EXC, 250/350 EXC-F</li></ul> dölj mer info

79434931044

Lagerstatus: 1
Pris: 520kr
PowerParts|CNC-parts, anodized|Chassis
Gear shift lever step plate
6 mm wider contact surface than standard.
6 mm wider contact surface than standard. dölj mer info

77230902144

Lagerstatus: 3
Pris: 335kr
PowerParts|CNC-parts, anodized|Engine
Factory ignition cover plug
'CNC machined version, highly resistant aluminium
Precious anodized surface
'CNC machined version, highly resistant aluminium<br />Precious anodized surface dölj mer info

77338941044

Lagerstatus: 3
Pris: 450kr
PowerParts|CNC-parts, anodized|Engine
Oil filter cover
CNC machined version, highly resistant aluminium
Precious anodized surface
CNC machined version, highly resistant aluminium<br />Precious anodized surface dölj mer info

79430920044

Lagerstatus: 8
Pris: 230kr
PowerParts|CNC-parts, anodized|Engine
Oil plug
'CNC machined version, highly resistant aluminium
Precious anodized surface
'CNC machined version, highly resistant aluminium<br />Precious anodized surface dölj mer info

79238904044

Lagerstatus: hos lev.
Pris: 450kr
PowerParts|CNC-parts, anodized|Engine
Oil pump cover
DO YOU KNOW that all KTM CNC parts are manufactured from highest quality aluminum and therefore not only look good, they also withstand the toughest treatment? With the anodized aluminum components in the original factory look from the PowerParts range, you can turn your KTM into something very special.
DO YOU KNOW that all KTM CNC parts are manufactured from highest quality aluminum and therefore not only look good, they also withstand the toughest treatment? With the anodized aluminum components in the original factory look from the PowerParts range, you can turn your KTM into something very special. dölj mer info

54835980000

Lagerstatus: 16
Pris: 92kr
PowerParts|Cooling|Protection
Foam rubber
For extremely muddy conditions. Prevents the radiator from becoming clogged with mud and the engine from overheating.
For extremely muddy conditions. Prevents the radiator from becoming clogged with mud and the engine from overheating. dölj mer info

72035936000

Lagerstatus: hos lev.
Pris: 1150kr
PowerParts|Cooling|Protection
Radiator protection
Perfect crash bar for radiators. Simple fitting.
Perfect crash bar for radiators. Simple fitting. dölj mer info

79035994000EB

Lagerstatus: 2
Pris: 450kr
PowerParts|Cooling|Protection
Water pump cover protection
This plastic protector prevents damage to the water-pump cover and radiator hose in the hose connection area.
This plastic protector prevents damage to the water-pump cover and radiator hose in the hose connection area. dölj mer info

25530826000

Lagerstatus: hos lev.
Pris: 2310kr
PowerParts|Engine|Engine parts, 4-stroke
HINSON-outer clutch cover
  • Manufactured from high grade aluminium
  • Hard anodized, extreme durable surface
<ul><li class="li-square">Manufactured from high grade aluminium</li><li class="li-square">Hard anodized, extreme durable surface</li></ul> dölj mer info

79230926044

Lagerstatus: hos lev.
Pris: 2195kr
PowerParts|Engine|Engine parts, 4-stroke
Outer clutch cover
DID YOU KNOW that all KTM CNC parts are manufactured from high grade aluminum, which not only looks great but can also stand up to the toughest loads? The original factory look, anodized aluminum Power Parts are just the thing to give your KTM that something special.
DID YOU KNOW that all KTM CNC parts are manufactured from high grade aluminum, which not only looks great but can also stand up to the toughest loads? The original factory look, anodized aluminum Power Parts are just the thing to give your KTM that something special. dölj mer info

72005979100

Lagerstatus: hos lev.
Pris: 10445kr
PowerParts|Exhaust systems|4-stroke Offroad
Akrapovi? "Slip-on Line"
These slip-on factory silencers have been developed in collaboration with Akrapovi? for the extreme requirements of enduring offroad use and specially tuned to the KTM characteristics.
The benefits:
  • Improved torque curve combined with very rideable peak performance
  • More sensitive throttle response and resulting improved traction
  • Durability suitable for extreme enduro use
  • Made from titanium - that means: ultra-light
  • Welded on brackets
  • Carbon end cap
Can only be fitted in combination with original header.
These slip-on factory silencers have been developed in collaboration with Akrapovi? for the extreme requirements of enduring offroad use and specially tuned to the KTM characteristics.<br />The benefits:<ul><li class="li-disc">Improved torque curve combined with very rideable peak performance</li><li class="li-disc">More sensitive throttle response and resulting improved traction</li><li class="li-disc">Durability suitable for extreme enduro use</li><li class="li-disc">Made from titanium - that means: ultra-light</li><li class="li-disc">Welded on brackets</li><li class="li-disc">Carbon end cap</li></ul>Can only be fitted in combination with original header. dölj mer info

54803095000

Lagerstatus: 2
Pris: 81kr
PowerParts|Footpegs
Foam rubber
For extremely muddy conditions.
For extremely muddy conditions. dölj mer info

78003940244

Lagerstatus: hos lev.
Pris: 2310kr
PowerParts|Footpegs
Pivot Pegz

Ingenious: Foot pegs that move with you when you shift your weight. Ideal for Motocross, Enduro and Supermoto.

The benefits:

  • Spring-mounted, 20-degree rotational movement possible towards front and rear
  • More control and grip in the corners thanks to the maneuverability
  • Large tread surface of 60 mm
  • Simpler and quicker weight shifting
  • Simpler gear changing and braking
  • Permanent contact between boot and foot peg: extends the service life of your boots!
<p>Ingenious: Foot pegs that move with you when you shift your weight. Ideal for Motocross, Enduro and Supermoto. </p><p>The benefits:</p><ul><li>Spring-mounted, 20-degree rotational movement possible towards front and rear</li><li>More control and grip in the corners thanks to the maneuverability</li><li>Large tread surface of 60 mm</li><li>Simpler and quicker weight shifting</li><li>Simpler gear changing and braking</li><li>Permanent contact between boot and foot peg: extends the service life of your boots!</li></ul> dölj mer info

U6951716

Lagerstatus: hos lev.
Pris: 100kr
PowerParts|Handlebars/instruments/electrics|Grips
Grip donut set
Optimum protection against blisters on the thumbs with these coated neoprene rings. Simple to slide onto the grips.
Optimum protection against blisters on the thumbs with these coated neoprene rings. Simple to slide onto the grips. dölj mer info

78112964000

Lagerstatus: 9
Pris: 565kr
PowerParts|Handlebars/instruments/electrics|Grips
Grip heater
Ensures warm hands, even in bad weather. Can only be fitted by an authorized KTM dealer. We recommend use of auxiliary wiring harness 77711979000 for installation.
<div class="gs01l">Ensures warm hands, even in bad weather. Can only be fitted by an authorized KTM dealer. We recommend use of auxiliary wiring harness 77711979000 for installation.</div> dölj mer info

54802021100

Lagerstatus: 9
Pris: 155kr
PowerParts|Handlebars/instruments/electrics|Grips
Grip set
The special half-waffle grip has been developed to meet the demands and preferences of our factory riders, with the clear objectives: comfort AND safety - because no calluses on the palms and secure grip mean less stress when riding.
The benefits:
  • Ergonomic; contour matched to the shape of the hand for maximum comfort
  • Small "half waffle" ribs on the rear for secure grip
  • Made from two materials with different grades of hardness
  • Three areas for the metal safety wire
  • Grip hardness: medium
The special half-waffle grip has been developed to meet the demands and preferences of our factory riders, with the clear objectives: comfort AND safety - because no calluses on the palms and secure grip mean less stress when riding.<br />The benefits:<ul><li class="li-square">Ergonomic; contour matched to the shape of the hand for maximum comfort</li><li class="li-square">Small "half waffle" ribs on the rear for secure grip</li><li class="li-square">Made from two materials with different grades of hardness</li><li class="li-square">Three areas for the metal safety wire</li><li class="li-square">Grip hardness: medium</li></ul> dölj mer info

54802021000

Lagerstatus: 6
Pris: 155kr
PowerParts|Handlebars/instruments/electrics|Grips
Grip set
The special half-waffle grip has been developed to meet the demands and preferences of our factory riders, with the clear objectives: comfort AND safety - because no calluses on the palms and secure grip mean less stress when riding.
The benefits:
  • Ergonomic; contour matched to the shape of the hand for maximum comfort
  • Small "half waffle" ribs on the rear for secure grip
  • Made from two materials with different grades of hardness
  • Three areas for the metal safety wire
  • Grip hardness: soft
The special half-waffle grip has been developed to meet the demands and preferences of our factory riders, with the clear objectives: comfort AND safety - because no calluses on the palms and secure grip mean less stress when riding.<br />The benefits:<ul><li class="li-square">Ergonomic; contour matched to the shape of the hand for maximum comfort</li><li class="li-square">Small "half waffle" ribs on the rear for secure grip</li><li class="li-square">Made from two materials with different grades of hardness</li><li class="li-square">Three areas for the metal safety wire</li><li class="li-square">Grip hardness: soft</li></ul> dölj mer info

63002021200

Lagerstatus: 9
Pris: 255kr
PowerParts|Handlebars/instruments/electrics|Grips
Grip set
The KTM 2K (2K= 2 different materials) grip combines the durability of KTM standard grips and the comfort of the soft KTM grips.
  • Harder orange material on the inside and at the grip ends for a long service life
  • Softer black material on the outside, where the hand lies on the grip, for increased comfort
  • With open grip ends for closed handguards or bar ends
The KTM 2K (2K= 2 different materials) grip combines the durability of KTM standard grips and the comfort of the soft KTM grips.<ul><li class="li-disc">Harder orange material on the inside and at the grip ends for a long service life</li><li class="li-disc">Softer black material on the outside, where the hand lies on the grip, for increased comfort</li><li class="li-disc">With open grip ends for closed handguards or bar ends</li></ul> dölj mer info

63002021100

Lagerstatus: 7
Pris: 255kr
PowerParts|Handlebars/instruments/electrics|Grips
Grip set
The KTM 2K (2K= 2 different materials) grip combines the durability of KTM standard grips and the comfort of the soft KTM grips.
  • Harder orange material on the inside and at the grip ends for a long service life
  • Softer black material on the outside, where the hand lies on the grip, for increased comfort
The KTM 2K (2K= 2 different materials) grip combines the durability of KTM standard grips and the comfort of the soft KTM grips.<ul><li class="li-disc">Harder orange material on the inside and at the grip ends for a long service life</li><li class="li-disc">Softer black material on the outside, where the hand lies on the grip, for increased comfort</li></ul> dölj mer info

79002924100

Lagerstatus: 4
Pris: 335kr
PowerParts|Handlebars/instruments/electrics|Grips
Lock-on grip set
  • Grip replacement made easy
  • Right grip permanently glued to the throttle grip
  • Left grip with aluminum clamping ring for fixing on the handlebar
  • Inconvenient gluing and securing with wire no longer necessary
<ul><li class="li-square">Grip replacement made easy</li><li class="li-square">Right grip permanently glued to the throttle grip</li><li class="li-square">Left grip with aluminum clamping ring for fixing on the handlebar</li><li class="li-square">Inconvenient gluing and securing with wire no longer necessary</li></ul> dölj mer info

79002923000

Lagerstatus: 5
Pris: 335kr
PowerParts|Handlebars/instruments/electrics|Grips
Lock-on grip set
  • Grip replacement made easy
  • Right grip permanently glued to the throttle tube
  • Left grip with aluminum clamping ring for fixing on the handlebar
  • Inconvenient gluing and securing with wire no longer necessary
  • With open grip end for mounting of closed hand guard
<ul><li class="li-square">Grip replacement made easy</li><li class="li-square">Right grip permanently glued to the throttle tube</li><li class="li-square">Left grip with aluminum clamping ring for fixing on the handlebar</li><li class="li-square">Inconvenient gluing and securing with wire no longer necessary</li><li class="li-square">With open grip end for mounting of closed hand guard</li></ul> dölj mer info

79002923100

Lagerstatus: 11
Pris: 335kr
PowerParts|Handlebars/instruments/electrics|Grips
Lock-on grip set
  • Grip replacement made easy
  • Right grip permanently glued to the throttle tube
  • Left grip with aluminum clamping ring for fixing on the handlebar
  • Inconvenient gluing and securing with wire no longer necessary
  • With open grip end for mounting of closed hand guard
<ul><li class="li-square">Grip replacement made easy</li><li class="li-square">Right grip permanently glued to the throttle tube</li><li class="li-square">Left grip with aluminum clamping ring for fixing on the handlebar</li><li class="li-square">Inconvenient gluing and securing with wire no longer necessary</li><li class="li-square">With open grip end for mounting of closed hand guard</li></ul> dölj mer info

78102922000

Lagerstatus: 26
Pris: 160kr
PowerParts|Handlebars/instruments/electrics|Grips
Mud grips
The mud grips are simply pulled over existing grips and guarantee a secure hold on the grip rubber, even in extremely muddy conditions, thanks to their special material mix.
The mud grips are simply pulled over existing grips and guarantee a secure hold on the grip rubber, even in extremely muddy conditions, thanks to their special material mix. dölj mer info

78712916000

Lagerstatus: 4
Pris: 170kr
PowerParts|Handlebars/instruments/electrics|Grips
Supporting strap
  • High-strength nylon strap
  • Indispensable for use on extreme terrain
  • Attaches to fork tube
<ul><li class="li-square">High-strength nylon strap</li><li class="li-square">Indispensable for use on extreme terrain</li><li class="li-square">Attaches to fork tube</li></ul> dölj mer info

79002013100

Lagerstatus: 4
Pris: 230kr
PowerParts|Handlebars/instruments/electrics|Grips
Throttle twist grip tube
This gives you the option of fitting the handle grips your choice on to your bike.
This gives you the option of fitting the handle grips your choice on to your bike. dölj mer info

79602182044EB

Lagerstatus: 4
Pris: 325kr
PowerParts|Handlebars/instruments/electrics|Hand guards
Handguard
  • Open version
  • Manufactured with two-component injection molding technology
  • Black mid-section = maximum strength for optimum protection
  • Coloured top and bottom parts = highly flexible, enduring even the roughest of treatment
  • Attached directly at the levers with a special mounting.
<ul><li class="li-square">Open version</li><li class="li-square">Manufactured with two-component injection molding technology </li><li class="li-square">Black mid-section = maximum strength for optimum protection</li><li class="li-square">Coloured top and bottom parts = highly flexible, enduring even the roughest of treatment</li><li class="li-square">Attached directly at the levers with a special mounting.</li></ul> dölj mer info

6030217900004

Lagerstatus: hos lev.
Pris: 685kr
PowerParts|Handlebars/instruments/electrics|Hand guards
Handguard kit

This handguard set is not just visually impressive. Thanks to the special mix of materials, the handguard protects your hands and controls from damage without immediately breaking up. They also give you outstanding weather protection.

<p>This handguard set is not just visually impressive. Thanks to the special mix of materials, the handguard protects your hands and controls from damage without immediately breaking up. They also give you outstanding weather protection.</p> dölj mer info

6030217910028

Lagerstatus: 2
Pris: 685kr
PowerParts|Handlebars/instruments/electrics|Hand guards
Handguard kit

This handguard set is not just visually impressive. Thanks to the special mix of materials, the handguard protects your hands and controls from damage without immediately breaking up. They also give you outstanding weather protection.

<p>This handguard set is not just visually impressive. Thanks to the special mix of materials, the handguard protects your hands and controls from damage without immediately breaking up. They also give you outstanding weather protection.</p> dölj mer info

6030217910030

Lagerstatus: 2
Pris: 685kr
PowerParts|Handlebars/instruments/electrics|Hand guards
Handguard kit

This handguard set is not just visually impressive. Thanks to the special mix of materials, the handguard protects your hands and controls from damage without immediately breaking up. They also give you outstanding weather protection.

<p>This handguard set is not just visually impressive. Thanks to the special mix of materials, the handguard protects your hands and controls from damage without immediately breaking up. They also give you outstanding weather protection.</p> dölj mer info

7650297900028

Lagerstatus: hos lev.
Pris: 1150kr
PowerParts|Handlebars/instruments/electrics|Hand guards
Handguard kit

This handguard set has been specially developed for your motorcycle and is an essential accessory for heavy-duty offroad and Supermoto sessions. The broad, generous proportions, combined with the robust aluminum external frame ensure good mobility together with maximum protection in the event of a collision, stones thrown up from the road, branches etc.

<p>This handguard set has been specially developed for your motorcycle and is an essential accessory for heavy-duty offroad and Supermoto sessions. The broad, generous proportions, combined with the robust aluminum external frame ensure good mobility together with maximum protection in the event of a collision, stones thrown up from the road, branches etc.</p> dölj mer info

7800207920030

Lagerstatus: 4
Pris: 635kr
PowerParts|Handlebars/instruments/electrics|Hand guards
Handguard kit
These handguards developed especially for KTM bikes are an indispensable companion for serious offroad and supermoto use. The wide, spacious design ensures excellent mobility and maximum protection against impact, flying stones, branches, etc. Cannot be fitted with Twinwall handlebar.
These handguards developed especially for KTM bikes are an indispensable companion for serious offroad and supermoto use. The wide, spacious design ensures excellent mobility and maximum protection against impact, flying stones, branches, etc. Cannot be fitted with Twinwall handlebar. dölj mer info

7800207920028

Lagerstatus: 3
Pris: 635kr
PowerParts|Handlebars/instruments/electrics|Hand guards
Handguard kit
These handguards developed especially for KTM bikes are an indispensable companion for serious offroad and supermoto use. The wide, spacious design ensures excellent mobility and maximum protection against impact, flying stones, branches, etc. Cannot be fitted with Twinwall handlebar.
These handguards developed especially for KTM bikes are an indispensable companion for serious offroad and supermoto use. The wide, spacious design ensures excellent mobility and maximum protection against impact, flying stones, branches, etc. Cannot be fitted with Twinwall handlebar. dölj mer info

7800207910004

Lagerstatus: 3
Pris: 635kr
PowerParts|Handlebars/instruments/electrics|Hand guards
Handguard kit
The closed, two-component plastic handguards developed by KTM feature a black center section that offers maximum strength for optimum protection. The colorful upper and lower parts are highly flexible and endure even the roughest of treatment without complaint. Available in two different heights.
<div class="gs01l">The closed, two-component plastic handguards developed by KTM feature a black center section that offers maximum strength for optimum protection. The colorful upper and lower parts are highly flexible and endure even the roughest of treatment without complaint. Available in two different heights.</div> dölj mer info

60302179000EB

Lagerstatus: 1
Pris: 685kr
PowerParts|Handlebars/instruments/electrics|Hand guards
Handguard kit
This handguard set is not just visually impressive. Thanks to the special mix of materials, the handguard protects your hands and controls from damage without immediately breaking up. They also give you outstanding weather protection.
  • 78002079100EB is mounted standard on the 790 Adventure R
This handguard set is not just visually impressive. Thanks to the special mix of materials, the handguard protects your hands and controls from damage without immediately breaking up. They also give you outstanding weather protection.<ul><li class="li-square">78002079100EB is mounted standard on the 790 Adventure R<br /></li></ul> dölj mer info

78002079100EB

Lagerstatus: 1
Pris: 635kr
PowerParts|Handlebars/instruments/electrics|Hand guards
Handguard kit
In the closed, two-component, plastic hand guards developed by KTM the black middle section provides maximum strength, ensuring optimum protection. The colored top and bottom parts are highly flexible and can tolerate the roughest handling. Available in two different heights.
In the closed, two-component, plastic hand guards developed by KTM the black middle section provides maximum strength, ensuring optimum protection. The colored top and bottom parts are highly flexible and can tolerate the roughest handling. Available in two different heights. dölj mer info

7650297910030

Lagerstatus: hos lev.
Pris: 1150kr
PowerParts|Handlebars/instruments/electrics|Hand guards
Handguard kit
This handguard set has been specially developed for your motorcycle and is an essential accessory for heavy-duty offroad and Supermoto sessions. The broad, generous proportions, combined with the robust aluminum external frame ensure good mobility together with maximum protection in the event of a collision, stones thrown up from the road, branches etc.
This handguard set has been specially developed for your motorcycle and is an essential accessory for heavy-duty offroad and Supermoto sessions. The broad, generous proportions, combined with the robust aluminum external frame ensure good mobility together with maximum protection in the event of a collision, stones thrown up from the road, branches etc. dölj mer info

7960218204428

Lagerstatus: 1
Pris: 325kr
PowerParts|Handlebars/instruments/electrics|Hand guards
Handguard kit
Thanks to splitting of the surfaces, these open, very light KTM (MX) handguards ensure an uncompromising racing look in the angular KTM design. In two-component injection moulding technology:
  • Black center section = maximum strength for optimum protection
  • Coloured upper and lower parts = highly flexible for enduring the roughest of treatment
  • The choice is yours: attached directly to the handlebar with a plastic bracket or directly to the lever mounting with a special adaptor.
  • Cannot be fitted with Twinwall handlebar.

Attached directly at the levers with a special mounting.

Thanks to splitting of the surfaces, these open, very light KTM (MX) handguards ensure an uncompromising racing look in the angular KTM design. In two-component injection moulding technology:<br /><ul><li class="li-disc">Black center section = maximum strength for optimum protection</li><li class="li-disc">Coloured upper and lower parts = highly flexible for enduring the roughest of treatment</li><li class="li-disc">The choice is yours: attached directly to the handlebar with a plastic bracket or directly to the lever mounting with a special adaptor.</li><li class="li-disc">Cannot be fitted with Twinwall handlebar.</li></ul><p>Attached directly at the levers with a special mounting.</p> dölj mer info

79702979000EB

Lagerstatus: hos lev.
Pris: 1460kr
PowerParts|Handlebars/instruments/electrics|Hand guards
Handguard kit
This handguard set has been specially developed for your motorcycle and is an essential accessory for heavy-duty offroad and Supermoto sessions. The broad, generous proportions, combined with the robust aluminum external frame ensure good mobility together with maximum protection in the event of a collision, stones thrown up from the road, branches etc.
This handguard set has been specially developed for your motorcycle and is an essential accessory for heavy-duty offroad and Supermoto sessions. The broad, generous proportions, combined with the robust aluminum external frame ensure good mobility together with maximum protection in the event of a collision, stones thrown up from the road, branches etc. dölj mer info

7970297900028

Lagerstatus: hos lev.
Pris: 1460kr
PowerParts|Handlebars/instruments/electrics|Hand guards
Handguard kit
This handguard set has been specially developed for your motorcycle and is an essential accessory for heavy-duty offroad and Supermoto sessions. The broad, generous proportions, combined with the robust aluminum external frame ensure good mobility together with maximum protection in the event of a collision, stones thrown up from the road, branches etc.
This handguard set has been specially developed for your motorcycle and is an essential accessory for heavy-duty offroad and Supermoto sessions. The broad, generous proportions, combined with the robust aluminum external frame ensure good mobility together with maximum protection in the event of a collision, stones thrown up from the road, branches etc. dölj mer info

7970297900030

Lagerstatus: hos lev.
Pris: 1460kr
PowerParts|Handlebars/instruments/electrics|Hand guards
Handguard kit
This handguard set has been specially developed for your motorcycle and is an essential accessory for heavy-duty offroad and Supermoto sessions. The broad, generous proportions, combined with the robust aluminum external frame ensure good mobility together with maximum protection in the event of a collision, stones thrown up from the road, branches etc.
This handguard set has been specially developed for your motorcycle and is an essential accessory for heavy-duty offroad and Supermoto sessions. The broad, generous proportions, combined with the robust aluminum external frame ensure good mobility together with maximum protection in the event of a collision, stones thrown up from the road, branches etc. dölj mer info

79602979000AB

Lagerstatus: hos lev.
Pris: 520kr
PowerParts|Handlebars/instruments/electrics|Hand guards
Handguard kit
Thanks to splitting of the surfaces, these open, very light KTM (MX) handguards ensure an uncompromising racing look in the angular KTM design. In two-component injection moulding technology:
  • Black center section = maximum strength for optimum protection
  • Coloured upper and lower parts = highly flexible for enduring the roughest of treatment
  • The choice is yours: attached directly to the handlebar with a plastic bracket or directly to the lever mounting with a special adaptor
  • Cannot be fitted with Twinwall handlebar

Attached directly at the levers with a special mounting.

Thanks to splitting of the surfaces, these open, very light KTM (MX) handguards ensure an uncompromising racing look in the angular KTM design. In two-component injection moulding technology:<ul><li class="li-square">Black center section = maximum strength for optimum protection</li><li class="li-square">Coloured upper and lower parts = highly flexible for enduring the roughest of treatment</li><li class="li-square">The choice is yours: attached directly to the handlebar with a plastic bracket or directly to the lever mounting with a special adaptor</li><li class="li-square">Cannot be fitted with Twinwall handlebar</li></ul><p>Attached directly at the levers with a special mounting.</p> dölj mer info

79702979000AB

Lagerstatus: hos lev.
Pris: 1460kr
PowerParts|Handlebars/instruments/electrics|Hand guards
Handguard kit
This handguard set has been specially developed for your motorcycle and is an essential accessory for heavy-duty offroad and Supermoto sessions. The broad, generous proportions, combined with the robust aluminum external frame ensure good mobility together with maximum protection in the event of a collision, stones thrown up from the road, branches etc.
This handguard set has been specially developed for your motorcycle and is an essential accessory for heavy-duty offroad and Supermoto sessions. The broad, generous proportions, combined with the robust aluminum external frame ensure good mobility together with maximum protection in the event of a collision, stones thrown up from the road, branches etc. dölj mer info

76502979144

Lagerstatus: 8
Pris: 1030kr
PowerParts|Handlebars/instruments/electrics|Hand guards
Handguard kit
Extremely stable aluminum prevents broken levers if the bike should ever fall over.
Including fastening materials.
Extremely stable aluminum prevents broken levers if the bike should ever fall over.<br />Including fastening materials. dölj mer info

7210297900028

Lagerstatus: hos lev.
Pris: 635kr
PowerParts|Handlebars/instruments/electrics|Hand guards
Handguard kit
  • Open version
  • Manufactured with two-component injection molding technology
  • Black mid-section = maximum strength for optimum protection
  • Coloured top and bottom parts = highly flexible, enduring even the roughest of treatment
  • Attached directly at the levers with a special mounting.
<ul><li class="li-square">Open version</li><li class="li-square">Manufactured with two-component injection molding technology </li><li class="li-square">Black mid-section = maximum strength for optimum protection</li><li class="li-square">Coloured top and bottom parts = highly flexible, enduring even the roughest of treatment</li><li class="li-square">Attached directly at the levers with a special mounting.</li></ul> dölj mer info

7210297900030

Lagerstatus: hos lev.
Pris: 635kr
PowerParts|Handlebars/instruments/electrics|Hand guards
Handguard kit
  • Open version
  • Manufactured with two-component injection molding technology
  • Black mid-section = maximum strength for optimum protection
  • Coloured top and bottom parts = highly flexible, enduring even the roughest of treatment
  • Attached directly at the levers with a special mounting.
<ul><li class="li-square">Open version</li><li class="li-square">Manufactured with two-component injection molding technology </li><li class="li-square">Black mid-section = maximum strength for optimum protection</li><li class="li-square">Coloured top and bottom parts = highly flexible, enduring even the roughest of treatment</li><li class="li-square">Attached directly at the levers with a special mounting.</li></ul> dölj mer info

79702908000

Lagerstatus: 8
Pris: 230kr
PowerParts|Handlebars/instruments/electrics|Hand guards
Handlebar muffs
  • Never again cold fingers!
  • Mounting over handlebar and switches
  • Better control during winter ride-outs
<ul><li class="li-square">Never again cold fingers! </li><li class="li-square">Mounting over handlebar and switches</li><li class="li-square">Better control during winter ride-outs</li></ul> dölj mer info

79602979044

Lagerstatus: 5
Pris: 345kr
PowerParts|Handlebars/instruments/electrics|Hand guards
Wrap-around handguard kit
  • Made of sturdy plastic
  • Converts the originally open handguards into a closed version
  • Compatible also with handguards 79602979000EB/28/30/AB and 72102979000EB/28/30
<ul><li class="li-square">Made of sturdy plastic</li><li class="li-square">Converts the originally open handguards into a closed version</li><li class="li-square">Compatible also with handguards 79602979000EB/28/30/AB and 72102979000EB/28/30</li></ul> dölj mer info

78901939244

Lagerstatus: hos lev.
Pris: 565kr
PowerParts|Handlebars/instruments/electrics|Handlebar supports
Handlebar mount kit
Available in five different heights.
Included in the kit are 2x handlebar support lower parts and 2x fastening bolts.
The upper parts and bolts required for clamping the handlebar are taken from the original handlebar support.
Available in five different heights. <br />Included in the kit are 2x handlebar support lower parts and 2x fastening bolts.<br />The upper parts and bolts required for clamping the handlebar are taken from the original handlebar support. dölj mer info

77701939030

Lagerstatus: 1
Pris: 685kr
PowerParts|Handlebars/instruments/electrics|Handlebar supports
Handlebar riser
These CNC-machined, high-strength aluminum handlebar risers are extremely robust thanks to their special screw fastening (from below) on the triple clamp. Twisting and bending are therefore practically impossible. Use of these handlebar risers is only possible on CNC-machined triple clamps. Available in three different heights.
<div class="gs01l">These CNC-machined, high-strength aluminum handlebar risers are extremely robust thanks to their special screw fastening (from below) on the triple clamp. Twisting and bending are therefore practically impossible. Use of these handlebar risers is only possible on CNC-machined triple clamps. Available in three different heights.</div> dölj mer info

SXS07125200

Lagerstatus: 2
Pris: 2080kr
PowerParts|Handlebars/instruments/electrics|Handlebar supports
Progressive handlebar damping system (PHDS)
The CNC-machined handlebar mounting with cushioning rubber inserts relieves wrist and shoulder joints.
Further benefits of the PHDS:
  • Cushioning of heavy knocks
  • Absorption of vibration from chassis and engine
  • Additional handlebar damping in horizontal direction
  • Optimum steering precision
  • Handlebar height adjustable to 2 positions
  • Further damping elements available in three degrees of hardness (soft, medium, hard) for individual tuning
The CNC-machined handlebar mounting with cushioning rubber inserts relieves wrist and shoulder joints.<br />Further benefits of the PHDS:<ul><li class="li-disc">Cushioning of heavy knocks</li><li class="li-disc">Absorption of vibration from chassis and engine</li><li class="li-disc">Additional handlebar damping in horizontal direction</li><li class="li-disc">Optimum steering precision</li><li class="li-disc">Handlebar height adjustable to 2 positions</li><li class="li-disc">Further damping elements available in three degrees of hardness (soft, medium, hard) for individual tuning</li></ul> dölj mer info

5480200130004

Lagerstatus: 2
Pris: 1150kr
PowerParts|Handlebars/instruments/electrics|Handlebars
Handlebar
DO YOU KNOW that KTM handlebars must withstand very elaborate and specially developed test cycles before they come to market?
The facts:
  • All KTM handlebars are made from EN AW 7010 T6 aluminum
  • 28.5 mm diameter in the clamping area
  • 22.15 mm diameter in the lever area
  • Position markings for simple setting
  • Dimensions: A = 115 mm, B = 806 mm, C = 62 mm
DO YOU KNOW that KTM handlebars must withstand very elaborate and specially developed test cycles before they come to market?<br />The facts:<ul><li class="li-disc">All KTM handlebars are made from EN AW 7010 T6 aluminum</li><li class="li-disc">28.5 mm diameter in the clamping area</li><li class="li-disc">22.15 mm diameter in the lever area</li><li class="li-disc">Position markings for simple setting</li><li class="li-disc">Dimensions: A = 115 mm, B = 806 mm, C = 62 mm</li></ul> dölj mer info

25-9991-04

Lagerstatus: 1
Pris: 1695kr
PowerParts|Handlebars/instruments/electrics|Handlebars
Renthal Twinwall handlebar
The Renthal Twinwall 999, in KTM orange design, combines two handlebars in one: An exterior guarantees maximum strength against external damage (e.g. falling over) and is also anodized against corrosion. The interior, made of a special alloy, is also hard anodized to protect it from damage by the handlebar controls. Nylon inserts in the inner tube allow thinner walls. This saves weight and has a positive effect on the flexing properties. Rubber seals at the crossing points of the two tubes to prevent the ingress of water, dirt, cleaning agents, and other contaminants. Comes with handlebar padding.

Dimensions: A = 79 mm, B = 811 mm, C = 74 mm

The Renthal Twinwall 999, in KTM orange design, combines two handlebars in one: An exterior guarantees maximum strength against external damage (e.g. falling over) and is also anodized against corrosion. The interior, made of a special alloy, is also hard anodized to protect it from damage by the handlebar controls. Nylon inserts in the inner tube allow thinner walls. This saves weight and has a positive effect on the flexing properties. Rubber seals at the crossing points of the two tubes to prevent the ingress of water, dirt, cleaning agents, and other contaminants. Comes with handlebar padding.<p>Dimensions: A = 79 mm, B = 811 mm, C = 74 mm</p> dölj mer info

7950290100004

Lagerstatus: hos lev.
Pris: 1740kr
PowerParts|Handlebars/instruments/electrics|Handlebars
Renthal Twinwall handlebar
The Renthal winwall 996, in KTM orange design, combines two handlebars in one: An exterior guarantees maximum strength against external damage (e.g. falling over) and is also anodized against corrosion. The interior, made of a special alloy, is also hard anodized to protect it from damage by the handlebar controls. Nylon inserts in the inner tube allow thinner walls. This saves weight and has a positive effect on the flexing properties. Rubber seals at the crossing points of the two tubes to prevent the ingress of water, dirt, cleaning agents, and other contaminants. Comes with handlebar padding.

Dimensions: A = 118 mm, B = 811 mm, C = 74 mm

The Renthal winwall 996, in KTM orange design, combines two handlebars in one: An exterior guarantees maximum strength against external damage (e.g. falling over) and is also anodized against corrosion. The interior, made of a special alloy, is also hard anodized to protect it from damage by the handlebar controls. Nylon inserts in the inner tube allow thinner walls. This saves weight and has a positive effect on the flexing properties. Rubber seals at the crossing points of the two tubes to prevent the ingress of water, dirt, cleaning agents, and other contaminants. Comes with handlebar padding.<p>Dimensions: A = 118 mm, B = 811 mm, C = 74 mm</p> dölj mer info

77711979000

Lagerstatus: hos lev.
Pris: 170kr
PowerParts|Handlebars/instruments/electrics|Instruments/electrics
Auxiliary wiring harness

We recommend using this additional wiring harness for all power consumers. Furthermore you have with the option of installing power consumers such as grip heating or a fan on your SX or XC with this wiring harness. Warning: The power consumer is now connected directly to the battery. If it is not turned off, the battery is therefore also drained when the engine is switched off. Optionally available: Y-distributor 777.11.979.010 or 777.11.979.044.

<p>We recommend using this additional wiring harness for all power consumers. Furthermore you have with the option of installing power consumers such as grip heating or a fan on your SX or XC with this wiring harness. Warning: The power consumer is now connected directly to the battery. If it is not turned off, the battery is therefore also drained when the engine is switched off. Optionally available: Y-distributor 777.11.979.010 or 777.11.979.044.</p> dölj mer info

79039974044

Lagerstatus: 1
Pris: 1150kr
PowerParts|Handlebars/instruments/electrics|Instruments/electrics
Combination switch
  • Select between the two different preset engine configurations
  • Activate traction control for the two different engine configurations
  • Plug & Play – easy installation on handlebar
<ul><li class="li-square">Select between the two different preset engine configurations</li><li class="li-square">Activate traction control for the two different engine configurations</li><li class="li-square">Plug &amp; Play – easy installation on handlebar</li></ul> dölj mer info

78112920000

Lagerstatus: 1
Pris: 755kr
PowerParts|Handlebars/instruments/electrics|Instruments/electrics
Hourmeter
Know exactly when the next service is due.
Know exactly when the next service is due. dölj mer info

79614901000

Lagerstatus: 4
Pris: 3240kr
PowerParts|Handlebars/instruments/electrics|Instruments/electrics
LED-Headlight
  • LED technology, specially developed for the Enduro set
  • Very high light power
  • Light intensity 1500 Lumen
  • Light color approx. 5500 Kelvin
  • Exceptionally robust
  • Can be installed in standard headlight mask
  • When installing on XC-W models, the pin assignment of the plug must be changed according to the user’s manual
  • on EXC and Freeride models, the LED headlight can be turned on and off with the high beam switch
<ul><li class="li-square">LED technology, specially developed for the Enduro set</li><li class="li-square">Very high light power</li><li class="li-square">Light intensity 1500 Lumen</li><li class="li-square">Light color approx. 5500 Kelvin</li><li class="li-square">Exceptionally robust</li><li class="li-square">Can be installed in standard headlight mask</li><li class="li-square">When installing on XC-W models, the pin assignment of the plug must be changed according to the user’s manual</li><li class="li-square">on EXC and Freeride models, the LED headlight can be turned on and off with the high beam switch</li></ul> dölj mer info

79111053000

Lagerstatus: 23
Pris: 1020kr
PowerParts|Handlebars/instruments/electrics|Instruments/electrics
Lithium ion battery

The following benefits are the mark of our lithium-ion batteries:

  • increased Cold Cranking Amps (CCA) value for better engine start in cold temperatures
  • 1 kg lighter than lead-acid battery 77311053000
  • 1.6 kg lighter than lead-acid battery 58511053000
  • Unbeatable cost/weight saving ratio
  • Mountable in any position, as it does not contain acid
  • Safe technology and long life

 

Technical data:

  • 12 V maintenance-free LiFePo4-battery
  • Capacity 2.0 Ah
  • Recommended charging current - 2.5 amps
  • Maximum charge current for fast charging - 10 amps
  • Fast charge with high charging current (up to 90% in 10 min)
  • Very low self-discharge (max. 5% per month)
  • Balanced discharge/charge of all cells through balancer
  • Contains no heavy metals

 

When mounting on 125 SX and SX-F models from 2016 onwards, the battery compartment 79011955044 is also required.

<p>The following benefits are the mark of our lithium-ion batteries:</p><ul><li class="li-square">increased Cold Cranking Amps (CCA) value for better engine start in cold temperatures</li><li class="li-square">1 kg lighter than lead-acid battery 77311053000</li><li class="li-square">1.6 kg lighter than lead-acid battery 58511053000</li><li class="li-square">Unbeatable cost/weight saving ratio</li><li class="li-square">Mountable in any position, as it does not contain acid</li><li class="li-square">Safe technology and long life</li></ul><p> </p><p>Technical data:</p><ul><li class="li-square">12 V maintenance-free LiFePo4-battery</li><li class="li-square">Capacity 2.0 Ah</li><li class="li-square">Recommended charging current - 2.5 amps</li><li class="li-square">Maximum charge current for fast charging - 10 amps</li><li class="li-square">Fast charge with high charging current (up to 90% in 10 min)</li><li class="li-square">Very low self-discharge (max. 5% per month)</li><li class="li-square">Balanced discharge/charge of all cells through balancer</li><li class="li-square">Contains no heavy metals</li></ul><p> </p><p>When mounting on 125 SX and SX-F models from 2016 onwards, the battery compartment 79011955044 is also required.<br /></p> dölj mer info

7201390224404

Lagerstatus: hos lev.
Pris: 1150kr
PowerParts|Handlebars/instruments/electrics|Levers
Flex brake lever
Ever had to give up during a race because of a broken clutch or brake lever? That will never happen again - these levers are designed to fold away on contact with the ground. For the right brake armature on the Freeride E.
Ever had to give up during a race because of a broken clutch or brake lever? That will never happen again - these levers are designed to fold away on contact with the ground. For the right brake armature on the Freeride E. dölj mer info

7200293124404

Lagerstatus: hos lev.
Pris: 1150kr
PowerParts|Handlebars/instruments/electrics|Levers
Flex clutch lever
Ever had to give up during a race because of a broken clutch or brake lever? That will never happen again - these levers are designed to fold away on contact with the ground. For the left brake armature on the Freeride E.
Ever had to give up during a race because of a broken clutch or brake lever? That will never happen again - these levers are designed to fold away on contact with the ground. For the left brake armature on the Freeride E. dölj mer info

77702944000

Lagerstatus: 8
Pris: 185kr
PowerParts|Handlebars/instruments/electrics|Special parts
Clamp
  • Including plastic insert
  • The brake or clutch armature rotates in case of a fall
  • Reduces the risk of a lever being broken
  • Suitable for all Brembo® and Formula brake and clutch assembles
<ul><li class="li-square">Including plastic insert</li><li class="li-square">The brake or clutch armature rotates in case of a fall</li><li class="li-square">Reduces the risk of a lever being broken</li><li class="li-square">Suitable for all Brembo® and Formula brake and clutch assembles</li></ul> dölj mer info

54802005000

Lagerstatus: 8
Pris: 170kr
PowerParts|Handlebars/instruments/electrics|Special parts
Handlebar ends
Protects rubber grips from grazing in the event of a fall.
Protects rubber grips from grazing in the event of a fall. dölj mer info

77202002144

Lagerstatus: 10
Pris: 255kr
PowerParts|Handlebars/instruments/electrics|Special parts
Handlebar pad
Provides optimum protection. Already a must at many events.
Provides optimum protection. Already a must at many events. dölj mer info

79002901050

Lagerstatus: 4
Pris: 405kr
PowerParts|Handlebars/instruments/electrics|Special parts
Handlebar pad

Provides optimum protection. With the integrated card holder you always have the time in view. A small extra pocket allows you to stow small items. Can also be fitted in combination with the PHDS-handlebar support.

<p>Provides optimum protection. With the integrated card holder you always have the time in view. A small extra pocket allows you to stow small items. Can also be fitted in combination with the PHDS-handlebar support.</p> dölj mer info

5021204000030

Lagerstatus: 2
Pris: 255kr
PowerParts|Handlebars/instruments/electrics|Special parts
Mirror
Left-hand version, light and robust.
<div class="gs01l">Left-hand version, light and robust.</div> dölj mer info

77012005000

Lagerstatus: hos lev.
Pris: 5215kr
PowerParts|Handlebars/instruments/electrics|Steering damper
Factory steering damper
Greater safety and stability at the front forks under speed. This extremely light and fully adjustable KTM steering damper offers a top performance for the price. The sophisticated damper mounting allows individual steering adjustment even after installation. Very low design profile.

00050000929 handle bar support kit required for use on MY16 and on XC from MY16.

Greater safety and stability at the front forks under speed. This extremely light and fully adjustable KTM steering damper offers a top performance for the price. The sophisticated damper mounting allows individual steering adjustment even after installation. Very low design profile.<p>00050000929 handle bar support kit required for use on MY16 and on XC from MY16.</p> dölj mer info

77012005144

Lagerstatus: 1
Pris: 755kr
PowerParts|Handlebars/instruments/electrics|Steering damper
Factory steering damper bracket
dölj mer info

77012005644

Lagerstatus: 2
Pris: 490kr
PowerParts|Handlebars/instruments/electrics|Steering damper
PHDS bracket for Factory steering damper
This bracket is required for fitting the progressive handlebar damping system (PHDS) SXS.07125200 in conjunction with factory steering damper 77012005000 or steering damper 58512050100, whereby the latter is only permissible if steering damper bracket 58512050144 or 58512050544 is used.
This bracket is required for fitting the progressive handlebar damping system (PHDS) SXS.07125200 in conjunction with factory steering damper 77012005000 or steering damper 58512050100, whereby the latter is only permissible if steering damper bracket 58512050144 or 58512050544 is used. dölj mer info

58512050100

Lagerstatus: hos lev.
Pris: 6955kr
PowerParts|Handlebars/instruments/electrics|Steering damper
Steering damper
Have you ever had the handlebars ripped out of your hands? This high-end steering damper provides maximum control on fast tracks and a significant increase in safety!
Further advantages
  • Extremely low weight
  • Sensitive feedback behavior
  • High speed setting
  • Optimum 25 click setting range

Proven success with the KTM Works Rally Team. Fits all SX and EXC models.

Have you ever had the handlebars ripped out of your hands? This high-end steering damper provides maximum control on fast tracks and a significant increase in safety!<br />Further advantages<ul><li>Extremely low weight</li><li>Sensitive feedback behavior</li><li>High speed setting</li><li>Optimum 25 click setting range</li></ul><p>Proven success with the KTM Works Rally Team. Fits all SX and EXC models.</p> dölj mer info

58512050144

Lagerstatus: hos lev.
Pris: 755kr
PowerParts|Handlebars/instruments/electrics|Steering damper
Steering damper bracket
dölj mer info

77212905444

Lagerstatus: hos lev.
Pris: 1845kr
PowerParts|Handlebars/instruments/electrics|Steering damper
Steering damper counter bearing
dölj mer info

00062030051

Lagerstatus: 11
Pris: 115kr
PowerParts|Lubricants/auxiliary materials
Grip glue
Perfect hold for your grips. Contents: 20 g.
Perfect hold for your grips. Contents: 20 g. dölj mer info

00062030058

Lagerstatus: 6
Pris: 86kr
PowerParts|Lubricants/auxiliary materials
Repair kit
The repair kit is a two-component epoxy resin adhesive. Hardens at room temperature: accelerated hardening possible by raising the temperature.
Use: Particularly suitable for steel, but also other metals, wood, concrete, ceramics, glass and most plastics. The steel bond is resistant to, among other things, oil, gasoline, diesel and battery acid.
Processing: Best results are achieved with clean and rough surfaces. Cut off the required amount and knead for approx. 1 minute until a uniform color is achieved. Use within 2 minutes.
At first, it seems as if there is no adhesion. Just carry on and press the adhesive mixture into the surface. Remove any excess material. When coating or repairing surfaces that are still wet, leak or are under water, apply pressure until adhesion begins. Smooth flat with water by hand for an even surface. Wash your hands with soap and water (or with a Turbo cleaning towelette) immediately after completing your work. Hardening commences after 5 to 10 minutes. The repaired part can be used again after as little as 60 minutes. The surfaces to be glued must be dry and free from dust and grease. Contents: 56 g.
The repair kit is a two-component epoxy resin adhesive. Hardens at room temperature: accelerated hardening possible by raising the temperature. <br />Use: Particularly suitable for steel, but also other metals, wood, concrete, ceramics, glass and most plastics. The steel bond is resistant to, among other things, oil, gasoline, diesel and battery acid. <br />Processing: Best results are achieved with clean and rough surfaces. Cut off the required amount and knead for approx. 1 minute until a uniform color is achieved. Use within 2 minutes.<br />At first, it seems as if there is no adhesion. Just carry on and press the adhesive mixture into the surface. Remove any excess material. When coating or repairing surfaces that are still wet, leak or are under water, apply pressure until adhesion begins. Smooth flat with water by hand for an even surface. Wash your hands with soap and water (or with a Turbo cleaning towelette) immediately after completing your work. Hardening commences after 5 to 10 minutes. The repaired part can be used again after as little as 60 minutes. The surfaces to be glued must be dry and free from dust and grease. Contents: 56 g. dölj mer info

38-2920

Lagerstatus: 3
Pris: 125kr
PowerParts|Lubricants/auxiliary materials
Thread lock

Medium-strength thread lock. Suitable for all metal thread connections.

<p> Medium-strength thread lock. Suitable for all metal thread connections.<br /></p> dölj mer info

00062030050

Lagerstatus: 6
Pris: 375kr
PowerParts|Lubricants/auxiliary materials
Thread lock

Medium strength thread lock - contents, 50 ml.

  • Temperature resistant from -55 to +200 °C 
  • Fills gaps up to 0.25 mm
  • Final strength achieved after 1 to 3 hours
<p>Medium strength thread lock - contents, 50 ml.</p><ul><li>Temperature resistant from -55 to +200 °C </li><li>Fills gaps up to 0.25 mm</li><li>Final strength achieved after 1 to 3 hours<br /></li></ul> dölj mer info

76512924000

Lagerstatus: 2
Pris: 170kr
PowerParts|Luggage
Inner bag
Keep your belongings dry and safe from dust with this handy and water resistant bag which can be placed inside the motorcycle luggage.
  • Waterproof resistant coating
  • Waterproof roll closure
Keep your belongings dry and safe from dust with this handy and water resistant bag which can be placed inside the motorcycle luggage.<ul><li class="li-square">Waterproof resistant coating</li><li class="li-square">Waterproof roll closure</li></ul> dölj mer info

78112978100

Lagerstatus: 2
Pris: 915kr
PowerParts|Luggage
Luggage bag
The robust, waterproof bag can be fitted simply and without additional installation materials. The volume of the bag is approx. 5 l. For use on Freeride models, rear rack 72012927044 is required.
<div class="gs01l">The robust, waterproof bag can be fitted simply and without additional installation materials. The volume of the bag is approx. 5 l. For use on Freeride models, rear rack 72012927044 is required.</div> dölj mer info

78112978200

Lagerstatus: hos lev.
Pris: 915kr
PowerParts|Luggage
Luggage bag
The robust, waterproof bag can be fitted simply and without additional installation materials. The volume of the bag is approx. 5 l. For use on Freeride models, rear rack 72012927044 is required.
<div class="gs01l">The robust, waterproof bag can be fitted simply and without additional installation materials. The volume of the bag is approx. 5 l. For use on Freeride models, rear rack 72012927044 is required.</div> dölj mer info

72012927044

Lagerstatus: 1
Pris: 1495kr
PowerParts|Luggage
Rear rack
Reinforcement for the rear end of your Freeride. Required when using universal rear bag 5 L 78112978100.
Reinforcement for the rear end of your Freeride. Required when using universal rear bag 5 L 78112978100. dölj mer info

62002903150

Lagerstatus: hos lev.
Pris: 230kr
PowerParts|Navigation
GPS bag
Keeps documents, maps, navigation and communication equipment (e.g., cellphone) dry and protected against vibration in your field of vision.
  • Suitable for all KTM GPS holders
  • Size: 170 x 130 x 35 mm
Keeps documents, maps, navigation and communication equipment (e.g., cellphone) dry and protected against vibration in your field of vision.<ul><li class="li-disc">Suitable for all KTM GPS holders</li><li class="li-disc">Size: 170 x 130 x 35 mm</li></ul> dölj mer info

60112092070

Lagerstatus: 2
Pris: 335kr
PowerParts|Navigation
Handlebar cross brace
Universally applicable for mounting the GPS bracket.
Universally applicable for mounting the GPS bracket. dölj mer info

61712991100

Lagerstatus: 2
Pris: 810kr
PowerParts|Navigation
Smartphone bracket
  • Universal and discreet mounting solution for your smartphone
  • Counterpart for the smartphone cases.
  • The smartphone can be easily mounted on the motorcycle by turning it 90°.
  • Can be clamped on the handlebar (including different adaptor)
  • The arm can be rotated in any position for the perfect position for your smartphone.
<ul><li class="li-square">Universal and discreet mounting solution for your smartphone</li><li class="li-square">Counterpart for the smartphone cases.</li><li class="li-square">The smartphone can be easily mounted on the motorcycle by turning it 90°.</li><li class="li-square">Can be clamped on the handlebar (including different adaptor)</li><li class="li-square">The arm can be rotated in any position for the perfect position for your smartphone.</li></ul> dölj mer info

61712991400

Lagerstatus: 1
Pris: 460kr
PowerParts|Navigation
Smartphone case HUAWEI Mate 20 Pro
  • Protects your expensive smartphone and still keeping a slim design
  • Integrated counterpart for the smartphone bracket
  • The smartphone can be easily mounted on the motorcycle by turning it 90°
<ul><li class="li-square">Protects your expensive smartphone and still keeping a slim design</li><li class="li-square">Integrated counterpart for the smartphone bracket</li><li class="li-square">The smartphone can be easily mounted on the motorcycle by turning it 90°</li></ul> dölj mer info

61712990100

Lagerstatus: 1
Pris: 460kr
PowerParts|Navigation
Smartphone case iPhone 6/6S/7/8
  • Unobtrusive protection for your expensive smartphone
  • Integrated counterpart for the smartphone bracket
  • The smartphone can easily be mounted on the bracket by turning it 90°.
<ul><li>Unobtrusive protection for your expensive smartphone</li><li>Integrated counterpart for the smartphone bracket</li><li>The smartphone can easily be mounted on the bracket by turning it 90°.</li></ul> dölj mer info

61712990000

Lagerstatus: 3
Pris: 460kr
PowerParts|Navigation
Smartphone case iPhone 6/6S/7/8 PLUS
  • Unobtrusive protection for your expensive smartphone
  • Integrated counterpart for the smartphone bracket
  • The smartphone can easily be mounted on the bracket by turning it 90°.
<ul><li>Unobtrusive protection for your expensive smartphone</li><li>Integrated counterpart for the smartphone bracket</li><li>The smartphone can easily be mounted on the bracket by turning it 90°.</li></ul> dölj mer info

61712990200

Lagerstatus: 1
Pris: 460kr
PowerParts|Navigation
Smartphone case iPhone X/XS
  • Unobtrusive protection for your expensive smartphone
  • Integrated counterpart for the smartphone bracket
  • The smartphone can easily be mounted on the bracket by turning it 90°.
<ul><li>Unobtrusive protection for your expensive smartphone</li><li>Integrated counterpart for the smartphone bracket</li><li>The smartphone can easily be mounted on the bracket by turning it 90°.</li></ul> dölj mer info

61712991300

Lagerstatus: 1
Pris: 460kr
PowerParts|Navigation
Smartphone case iPhone XR
  • Protects your expensive smartphone and still keeping a slim design
  • Integrated counterpart for the smartphone bracket
  • The smartphone can be easily mounted on the motorcycle by turning it 90°
<ul><li class="li-square">Protects your expensive smartphone and still keeping a slim design</li><li class="li-square">Integrated counterpart for the smartphone bracket</li><li class="li-square">The smartphone can be easily mounted on the motorcycle by turning it 90°</li></ul> dölj mer info

61712991200

Lagerstatus: hos lev.
Pris: 460kr
PowerParts|Navigation
Smartphone case iPhone XS Max
  • Protects your expensive smartphone and still keeping a slim design
  • Integrated counterpart for the smartphone bracket
  • The smartphone can be easily mounted on the motorcycle by turning it 90°
<ul><li class="li-square">Protects your expensive smartphone and still keeping a slim design</li><li class="li-square">Integrated counterpart for the smartphone bracket</li><li class="li-square">The smartphone can be easily mounted on the motorcycle by turning it 90°</li></ul> dölj mer info

61712990400

Lagerstatus: 1
Pris: 460kr
PowerParts|Navigation
Smartphone case Samsung Galaxy S8+/S9+
  • Unobtrusive protection for your expensive smartphone
  • Integrated counterpart for the smartphone bracket
  • The smartphone can easily be mounted on the bracket by turning it 90°.
<ul><li>Unobtrusive protection for your expensive smartphone</li><li>Integrated counterpart for the smartphone bracket</li><li>The smartphone can easily be mounted on the bracket by turning it 90°.</li></ul> dölj mer info

61712990300

Lagerstatus: 1
Pris: 460kr
PowerParts|Navigation
Smartphone case Samsung Galaxy S8/S9
  • Unobtrusive protection for your expensive smartphone
  • Integrated counterpart for the smartphone bracket
  • The smartphone can easily be mounted on the bracket by turning it 90°.
<ul><li>Unobtrusive protection for your expensive smartphone</li><li>Integrated counterpart for the smartphone bracket</li><li>The smartphone can easily be mounted on the bracket by turning it 90°.</li></ul> dölj mer info

61712991000

Lagerstatus: 4
Pris: 230kr
PowerParts|Navigation
Smartphone universal adapter
  • Can be stuck on any flat surface (rear side of smartphone, or smartphone case)
  • Integrated counterpart for the smartphone bracket
  • The smartphone can be easily mounted on the motorcycle by turning it 90°
  • Dimensions: 66x55mm (2.6x2.17 inch)
<ul><li class="li-square">Can be stuck on any flat surface (rear side of smartphone, or smartphone case)</li><li class="li-square">Integrated counterpart for the smartphone bracket</li><li class="li-square">The smartphone can be easily mounted on the motorcycle by turning it 90°</li><li class="li-square">Dimensions: 66x55mm (2.6x2.17 inch)</li></ul> dölj mer info

59501095100

Lagerstatus: hos lev.
Pris: 335kr
PowerParts|Protection|Chassis Offroad
Fork protector
  • Made from neoprene
  • Ideal protection for sealing the fork
  • For use with the open fork protector
  • For fork tube with a diameter of 43 mm
<ul><li class="li-square">Made from neoprene</li><li class="li-square">Ideal protection for sealing the fork</li><li class="li-square">For use with the open fork protector</li><li class="li-square">For fork tube with a diameter of 43 mm</li></ul> dölj mer info

72003994000

Lagerstatus: 2
Pris: 255kr
PowerParts|Protection|Chassis Offroad
Frame protection sticker set
For protecting your frame without altering the slender profile of your bike.
For protecting your frame without altering the slender profile of your bike. dölj mer info

52000092

Lagerstatus: 4
Pris: 310kr
PowerParts|Protection|Chassis Offroad
Protective fork sticker set
Extra thick film; protects the outer tubes against stone impact
For all 48 mm forks
Extra thick film; protects the outer tubes against stone impact<br />For all 48 mm forks dölj mer info

52000093

Lagerstatus: 4
Pris: 310kr
PowerParts|Protection|Chassis Offroad
Protective fork sticker set
Extra thick film; protects the outer tubes against stone impact
For all 48 mm forks
Extra thick film; protects the outer tubes against stone impact<br />For all 48 mm forks dölj mer info

72132975044

Lagerstatus: hos lev.
Pris: 635kr
PowerParts|Protection|Engine guard, 2-stroke Offroad
Clutch slave cylinder protection
DO YOU KNOW about the benefits of the KTM case guard?
  • Prevents damage to the engine case in the event of the chain breaking
  • No pulling-in of stones between chain and engine case (material-friendly)
  • CNC-machined from high-strength aluminum
  • Best possible and effective protection for the clutch slave cylinder
DO YOU KNOW about the benefits of the KTM case guard?<ul><li class="li-disc"> Prevents damage to the engine case in the event of the chain breaking</li><li class="li-disc"> No pulling-in of stones between chain and engine case (material-friendly)</li><li class="li-disc"> CNC-machined from high-strength aluminum</li><li class="li-disc"> Best possible and effective protection for the clutch slave cylinder</li></ul> dölj mer info

59003990250

Lagerstatus: hos lev.
Pris: 100kr
PowerParts|Protection|Engine guard, 2-stroke Offroad
Foam rubber
When positioned between engine and skid plate, less dirt can accumulate, hence allowing better cooling of the engine.
When positioned between engine and skid plate, less dirt can accumulate, hence allowing better cooling of the engine. dölj mer info

79230994500EB

Lagerstatus: 3
Pris: 635kr
PowerParts|Protection|Engine guard, 4-stroke Offroad
Clutch cover protection
  • Made from plastic
  • Optimum protection against stone impacts
  • Protects against the cover being pressed in by the brake lever in case of a fall
  • For the original outer clutch cover
<ul><li class="li-square">Made from plastic</li><li class="li-square">Optimum protection against stone impacts</li><li class="li-square">Protects against the cover being pressed in by the brake lever in case of a fall</li><li class="li-square">For the original outer clutch cover</li></ul> dölj mer info

72103990000

Lagerstatus: hos lev.
Pris: 1615kr
PowerParts|Protection|Engine guard, 4-stroke Offroad
Skid plate
The KTM aluminum skid plates provide the most effective protection for frame and engine:
  • Made from 4mm-thick, high-strength, robust aluminum
  • Side parts welded from inside and out
  • Extremely hard-wearing and endurance-tested for the toughest offroad use
  • Precisely fitting design - specially developed for KTM models
  • Highest quality workmanship
  • Quick and simple installation
The KTM aluminum skid plates provide the most effective protection for frame and engine:<ul><li class="li-disc">Made from 4mm-thick, high-strength, robust aluminum</li><li class="li-disc">Side parts welded from inside and out</li><li class="li-disc">Extremely hard-wearing and endurance-tested for the toughest offroad use </li><li class="li-disc">Precisely fitting design - specially developed for KTM models</li><li class="li-disc">Highest quality workmanship</li><li class="li-disc">Quick and simple installation</li></ul> dölj mer info

70007040000

Lagerstatus: hos lev.
Pris: 1315kr
PowerParts|Seats|Offroad
Seat
Also provides shorter riders with optimum control of the motorcycle in difficult terrain.
Approx. 7 mm lower than the standard seat.
Also provides shorter riders with optimum control of the motorcycle in difficult terrain.<br />Approx. 7 mm lower than the standard seat. dölj mer info

70007940000

Lagerstatus: hos lev.
Pris: 1615kr
PowerParts|Seats|Offroad
Seat
Particularly elastic foam for extra comfort. Standard height. On E-SX approx. 7 mm higher than the standard seat.
<div class="gs01l">Particularly elastic foam for extra comfort. Standard height. On E-SX approx. 7 mm higher than the standard seat.</div> dölj mer info

79407978000

Lagerstatus: 4
Pris: 120kr
PowerParts|Seats|Offroad
Seat pocket
Recommended for storing your timecard during races. Stick it directly to the seat with grip glue.
Recommended for storing your timecard during races. Stick it directly to the seat with grip glue. dölj mer info

72112955044

Lagerstatus: hos lev.
Pris: 1960kr
PowerParts|Suspension/triple clamp
Lowering kit
The low suspension kits specially developed by KTM in collaboration with WP are the perfect compromise between maximum chassis performance and minimum possible seat height. Just like the standard parts, the components used here are manufactured from the highest quality materials and, just like the standard parts, they have been specially tuned for offroad use in intensive endurance tests. To ensure best possible function of the suspension kits, we only recommend use with a rider weight of up to 70 kg.
The low suspension kits specially developed by KTM in collaboration with WP are the perfect compromise between maximum chassis performance and minimum possible seat height. Just like the standard parts, the components used here are manufactured from the highest quality materials and, just like the standard parts, they have been specially tuned for offroad use in intensive endurance tests. To ensure best possible function of the suspension kits, we only recommend use with a rider weight of up to 70 kg. dölj mer info

U6951010

Lagerstatus: 7
Pris: 115kr
PowerParts|Tanks
Factory fuel cap vent
DO YOU KNOW that all KTM CNC parts are manufactured from highest quality aluminum and therefore not only look good, they also withstand the toughest treatment? With the anodized aluminum components in the original factory look from the PowerParts range, you can turn your KTM into something very special.
DO YOU KNOW that all KTM CNC parts are manufactured from highest quality aluminum and therefore not only look good, they also withstand the toughest treatment? With the anodized aluminum components in the original factory look from the PowerParts range, you can turn your KTM into something very special. dölj mer info

77707988017

Lagerstatus: 1
Pris: 565kr
PowerParts|Tanks
Fuel pump connection
The factory fuel pump connection - also used by KTM factory riders - allows the fuel hose to be routed closer along the engine, thereby preventing the fuel hose from being pulled off unintentionally in offroad use.
The factory fuel pump connection - also used by KTM factory riders - allows the fuel hose to be routed closer along the engine, thereby preventing the fuel hose from being pulled off unintentionally in offroad use. dölj mer info

7723199700004

Lagerstatus: 4
Pris: 255kr
PowerParts|Tanks
Vent hose
Fuel-proof for tank and carburetor venting, approx. 3 m. Should only be used for venting purposes and not as a connection between tank and carburetor.
Fuel-proof for tank and carburetor venting, approx. 3 m. Should only be used for venting purposes and not as a connection between tank and carburetor. dölj mer info

78929955100

Lagerstatus: 2
Pris: 755kr
PowerParts|Tool/transport|Stands
Lift stand

Tool for lifting the motorcycle.

Stroke: 260/370 mm
Maximum load:  150 kg

<p>Tool for lifting the motorcycle.</p><p>Stroke: 260/370 mm<br />Maximum load:  150 kg</p> dölj mer info

78003923050

Lagerstatus: hos lev.
Pris: 685kr
PowerParts|Tool/transport|Stands
Stand plate
Specially for soft ground, such as sand. Size: 75 mm x 50 mm
Specially for soft ground, such as sand. Size: 75 mm x 50 mm dölj mer info

79629974000

Lagerstatus: hos lev.
Pris: 1495kr
PowerParts|Tool/transport|Tool
<table><tr><td>Battery charging and testing unit</td></tr></table>
  • Specially developed for LiFePo4-batteries
  • Voltages 13.2 V
  • Charging current - 2.5 amps
  • Optimizes battery performance and service life
  • Recovery mode for low battery voltage
  • Precise battery monitoring
<ul><li>Specially developed for LiFePo4-batteries</li><li>Voltages 13.2 V</li><li>Charging current - 2.5 amps</li><li>Optimizes battery performance and service life</li><li>Recovery mode for low battery voltage</li><li>Precise battery monitoring</li></ul> dölj mer info

58429074000

Lagerstatus: hos lev.
Pris: 1900kr
PowerParts|Tool/transport|Tool
Battery charging and testing unit
A must for every workshop/garage. Testing, charging and keeping batteries fresh made easy. Fully automatic and economical battery charging by means of programmed charge characteristic.
Clear LC display shows charging level. Reverse polarity protection, short-circuit protection, overload protection.
Adapter for UK : 584.29.074.001, Adapter for AUS: 584.29.074.002
CAUTION: The battery charger must not be connected to lithium-ion batteries for longer than 24h, lithium-ion batteries are also not suitable for trickle charging.
A must for every workshop/garage. Testing, charging and keeping batteries fresh made easy. Fully automatic and economical battery charging by means of programmed charge characteristic.<br />Clear LC display shows charging level. Reverse polarity protection, short-circuit protection, overload protection.<br />Adapter for UK : 584.29.074.001, Adapter for AUS: 584.29.074.002<br />CAUTION: The battery charger must not be connected to lithium-ion batteries for longer than 24h, lithium-ion batteries are also not suitable for trickle charging. dölj mer info

00029901000

Lagerstatus: 2
Pris: 290kr
PowerParts|Tool/transport|Tool
Bead buddy
The Bead Buddy acts as your third hand when fitting tires. Holds the tire in the tire bed, thereby making tire fitting much easier. Simply hook it into the spokes and away you go. Particularly recommended for tire fitting with mousse.
The Bead Buddy acts as your third hand when fitting tires. Holds the tire in the tire bed, thereby making tire fitting much easier. Simply hook it into the spokes and away you go. Particularly recommended for tire fitting with mousse. dölj mer info

00029940000

Lagerstatus: hos lev.
Pris: 345kr
PowerParts|Tool/transport|Tool
Cable organizer
  • Easy handling and operation
  • More safety
  • Less wear on the cord
  • Made of high quality material
  • Cable not included
<ul><li class="li-disc">Easy handling and operation</li><li class="li-disc">More safety</li><li class="li-disc">Less wear on the cord</li><li class="li-disc">Made of high quality material</li><li class="li-disc">Cable not included</li></ul> dölj mer info

U6951130

Lagerstatus: hos lev.
Pris: 115kr
PowerParts|Tool/transport|Tool
Cable tie
100x, length:20 cm.
100x, length:20 cm. dölj mer info

35-2801

Lagerstatus: 43
Pris: 209kr
PowerParts|Tool/transport|Tool
Chain breaker
dölj mer info

00029920000EB

Lagerstatus: 8
Pris: 230kr
PowerParts|Tool/transport|Tool
Chain gage

Patented gage for three important checks:

  • Check and adjust chain tension
  • Check chain lengthening (wear)
  • Check positioning of rear wheel axle
<p>Patented gage for three important checks:</p><ul><li class="li-square">Check and adjust chain tension</li><li class="li-square">Check chain lengthening (wear)</li><li class="li-square">Check positioning of rear wheel axle</li></ul> dölj mer info

79629974030

Lagerstatus: hos lev.
Pris: 230kr
PowerParts|Tool/transport|Tool
Charging cable
dölj mer info

79129941000

Lagerstatus: 11
Pris: 205kr
PowerParts|Tool/transport|Tool
Feeler gauge
0.10 mm; 0.12 mm; 0.15 mm; 0.20 mm; 0.25 mm
0.10 mm; 0.12 mm; 0.15 mm; 0.20 mm; 0.25 mm dölj mer info

60412002000

Lagerstatus: 4
Pris: 170kr
PowerParts|Tool/transport|Tool
First aid kit
  • Contents are in accordance with DIN standard 13167-2014 for motorcyclists
  • Waterproof packaging
  • With its slim shape and Velcro straps at the back, the first aid kit is easy to store

Note:

It is mandatory to carry a first aid kit in many countries (such as Austria, Italy, Portugal and Spain).

<ul><li class="li-square">Contents are in accordance with DIN standard 13167-2014 for motorcyclists</li><li class="li-square">Waterproof packaging</li><li class="li-square">With its slim shape and Velcro straps at the back, the first aid kit is easy to store</li></ul><p>Note:</p><p>It is mandatory to carry a first aid kit in many countries (such as Austria, Italy, Portugal and Spain).</p> dölj mer info

77312030000

Lagerstatus: 2
Pris: 635kr
PowerParts|Tool/transport|Tool
Foot pump
Small and light, so very portable - saves the day in the event of a puncture on the move! Mini-footpump with pressure gauge on the swiveling valve head that fits all prevalent valves. Integrated double-cylinder with pressure switch-over to high pressure. Maximum 12 bar. Height: approx. 170 mm folded together.
Small and light, so very portable - saves the day in the event of a puncture on the move! Mini-footpump with pressure gauge on the swiveling valve head that fits all prevalent valves. Integrated double-cylinder with pressure switch-over to high pressure. Maximum 12 bar. Height: approx. 170 mm folded together. dölj mer info

78129994000

Lagerstatus: 8
Pris: 335kr
PowerParts|Tool/transport|Tool
Fork seal doctor
This clever tool is a must for every motorcycle toolbox. With it, you can remove dirt from your fork seals effortlessly. No matter whether it's in the garage or directly at the racetrack. this tool extends the life of your seals many times over. For all 48 mm forks.
This clever tool is a must for every motorcycle toolbox. With it, you can remove dirt from your fork seals effortlessly. No matter whether it's in the garage or directly at the racetrack. this tool extends the life of your seals many times over. For all 48 mm forks. dölj mer info

59029050000

Lagerstatus: 3
Pris: 115kr
PowerParts|Tool/transport|Tool
Funnel
Funnel specially developed for KTM motorcycles. Diameter (small and large) optimized to suit the filler neck; special groove for optimum ventilation.
Funnel specially developed for KTM motorcycles. Diameter (small and large) optimized to suit the filler neck; special groove for optimum ventilation. dölj mer info

78029063000

Lagerstatus: 3
Pris: 115kr
PowerParts|Tool/transport|Tool
Measuring cup
With scaling for both the fluid level and different mixture ratios. Perfect for changing the oil and for preparing larger quantities of 2-stroke mixture in the canister. Simple handling thanks to the ergonomic design.
With scaling for both the fluid level and different mixture ratios. Perfect for changing the oil and for preparing larger quantities of 2-stroke mixture in the canister. Simple handling thanks to the ergonomic design. dölj mer info

54829035000

Lagerstatus: 6
Pris: 100kr
PowerParts|Tool/transport|Tool
Mud removal tool
Use this to remove the dirt from your last mud battle with ease! A motorcycle grip rubber (not included) can be fitted to the grip.
Use this to remove the dirt from your last mud battle with ease! A motorcycle grip rubber (not included) can be fitted to the grip. dölj mer info

00029997000

Lagerstatus: 1
Pris: 810kr
PowerParts|Tool/transport|Tool
Multi-purpose tool
The perfect alternative tool on the go. Conveniently packaged in a small bag you can use the tool for following fittings: 14, 12, 10, 8 mm hexagon sockets; 6, 8, 13 mm socket wrench; Inserts for slotted and Phillips screw heads, 5 mm / 6 mm Allen keys, 25/30 and 40/45 Torx; bottle opener; Option for attaching for 3/8 "and 1/4" socket wrench.
The perfect alternative tool on the go. Conveniently packaged in a small bag you can use the tool for following fittings: 14, 12, 10, 8 mm hexagon sockets; 6, 8, 13 mm socket wrench; Inserts for slotted and Phillips screw heads, 5 mm / 6 mm Allen keys, 25/30 and 40/45 Torx; bottle opener; Option for attaching for 3/8 "and 1/4" socket wrench. dölj mer info

7802906500004

Lagerstatus: 7
Pris: 115kr
PowerParts|Tool/transport|Tool
Oil bottle
Perfect for all 2-stroke riders on the move. The small bottle fits in your tool bag or jacket. Capacity 250 ml, with scaling for different mixture ratios (1 : 40 / 2.5 %; 1 : 50 / 2 %; 1 : 60 / 1.7 %; 1 : 80 / 1.25 %)
Perfect for all 2-stroke riders on the move. The small bottle fits in your tool bag or jacket. Capacity 250 ml, with scaling for different mixture ratios (1 : 40 / 2.5 %; 1 : 50 / 2 %; 1 : 60 / 1.7 %; 1 : 80 / 1.25 %) dölj mer info

59512030200

Lagerstatus: 5
Pris: 81kr
PowerParts|Tool/transport|Tool
Plug
Keeps water out of the silencer during cleaning. For internal diameters 37 mm – 62 mm.
Keeps water out of the silencer during cleaning. For internal diameters 37 mm – 62 mm. dölj mer info

7901203000004

Lagerstatus: 1
Pris: 81kr
PowerParts|Tool/transport|Tool
Plug
Keeps water out of the silencer during cleaning. For internal diameters 37 mm - 62 mm.
Keeps water out of the silencer during cleaning. For internal diameters 37 mm - 62 mm. dölj mer info

7901203010004

Lagerstatus: 15
Pris: 81kr
PowerParts|Tool/transport|Tool
Plug
To prevent the ingress of water in the silencer when cleaning. For inner diameters 15 mm - 38 mm.
To prevent the ingress of water in the silencer when cleaning. For inner diameters 15 mm - 38 mm. dölj mer info

54812016000

Lagerstatus: 1
Pris: 405kr
PowerParts|Tool/transport|Tool
Safety wire
200 m Wire with 0.61 mm diameter.
200 m Wire with 0.61 mm diameter. dölj mer info

00029090100

Lagerstatus: 2
Pris: 635kr
PowerParts|Tool/transport|Tool
Sag scale
Makes setting the sag significantly simpler. Folding version for easy stowing in the tool box.
Makes setting the sag significantly simpler. Folding version for easy stowing in the tool box. dölj mer info

7802996200030

Lagerstatus: 4
Pris: 170kr
PowerParts|Tool/transport|Tool
Screw pan
Magnetic. Never lose a bolt again!
Perfect for use in combination with the SX stand.
Magnetic. Never lose a bolt again!<br />Perfect for use in combination with the SX stand. dölj mer info

00029098200

Lagerstatus: 4
Pris: 255kr
PowerParts|Tool/transport|Tool
Screwdriver kit
High quality, 5-piece screwdriver set in the KTM design.
High quality, 5-piece screwdriver set in the KTM design. dölj mer info

7802906400004

Lagerstatus: 2
Pris: 58kr
PowerParts|Tool/transport|Tool
Spark plug box
With space for storing fuses.
With space for storing fuses. dölj mer info

77212991100

Lagerstatus: 13
Pris: 170kr
PowerParts|Tool/transport|Tool
Spoke wrench
6 mm and 6,8 mm
6 mm and 6,8 mm dölj mer info

58312078000

Lagerstatus: 2
Pris: 170kr
PowerParts|Tool/transport|Tool
Tool bag

The optimum solution for always having the most important tools to hand when on the road.

<p>The optimum solution for always having the most important tools to hand when on the road.</p> dölj mer info

00029098400

Lagerstatus: 2
Pris: 1845kr
PowerParts|Tool/transport|Tool
Toolbox
60-piece, 3/8" toolbox in orange with high-quality, chrome-vanadium tools.
Content:
  • Ratchet (with locking device), lever, two extensions and socket wrench
  • Hexagon sockets from 6 to 24
  • Allen keys from 3 to 10
  • Phillips and slotted bits
  • Torx bits from 15 to 55
With this, small jobs on your KTM can be completed quickly and reliably. Whether you're removing fairings or changing the oil, you'll definitely find the right tool here.
60-piece, 3/8" toolbox in orange with high-quality, chrome-vanadium tools.<br />Content:<ul><li class="li-disc">Ratchet (with locking device), lever, two extensions and socket wrench</li><li class="li-disc">Hexagon sockets from 6 to 24</li><li class="li-disc">Allen keys from 3 to 10</li><li class="li-disc">Phillips and slotted bits</li><li class="li-disc">Torx bits from 15 to 55</li></ul>With this, small jobs on your KTM can be completed quickly and reliably. Whether you're removing fairings or changing the oil, you'll definitely find the right tool here. dölj mer info

00029098300

Lagerstatus: hos lev.
Pris: 800kr
PowerParts|Tool/transport|Tool
Toolbox
38-piece, 1/4" toolbox in orange with high-quality, chrome-vanadium tools.
Content:
  • Ratchet (with locking device), lever, two extensions and socket wrench
  • Hexagon sockets from 4 to 14
  • Allen keys from 3 to 8
  • Phillips, slotted and Torx bits
With this, small jobs on your KTM can be completed quickly and reliably. Whether you're removing fairings or changing the oil, you'll definitely find the right tool here.
38-piece, 1/4" toolbox in orange with high-quality, chrome-vanadium tools.<br />Content:<ul><li class="li-disc">Ratchet (with locking device), lever, two extensions and socket wrench</li><li class="li-disc">Hexagon sockets from 4 to 14</li><li class="li-disc">Allen keys from 3 to 8</li><li class="li-disc">Phillips, slotted and Torx bits</li></ul>With this, small jobs on your KTM can be completed quickly and reliably. Whether you're removing fairings or changing the oil, you'll definitely find the right tool here. dölj mer info

00029996000

Lagerstatus: 2
Pris: 2660kr
PowerParts|Tool/transport|Tool
Torque wrench
High-quality, adjustable torque wrench 5-25 NM, including the following accessories:
  • Push-on spoke wrenches in sizes 5.65 and 6.95 mm
  • Push-on ratchet ¼"
  • Ratchet attachments: 6, 8, 10 mm socket wrench, 15 Torx
High-quality, adjustable torque wrench 5-25 NM, including the following accessories:<ul><li class="li-square">Push-on spoke wrenches in sizes 5.65 and 6.95 mm</li><li class="li-square">Push-on ratchet ¼"</li><li class="li-square">Ratchet attachments: 6, 8, 10 mm socket wrench, 15 Torx</li></ul> dölj mer info

51012092000

Lagerstatus: 7
Pris: 150kr
PowerParts|Tool/transport|Tool
Tyre lever
There's racing experience here as well! Practical tire iron - short version ideal for the portable tool bag.
There's racing experience here as well! Practical tire iron - short version ideal for the portable tool bag. dölj mer info

51012093000

Lagerstatus: 14
Pris: 170kr
PowerParts|Tool/transport|Tool
Tyre lever
There's racing experience here as well! Practical tire iron - long version for minimum effort.
There's racing experience here as well! Practical tire iron - long version for minimum effort. dölj mer info

78129984000

Lagerstatus: hos lev.
Pris: 1150kr
PowerParts|Tool/transport|Tool
Tyre lever kit
Made of high strength, orange anodized aluminum; not suitable for tire mounting with mousse. With integrated ring wrench SW 32, 27, 17, 13 and 10 mm.
Made of high strength, orange anodized aluminum; not suitable for tire mounting with mousse. With integrated ring wrench SW 32, 27, 17, 13 and 10 mm. dölj mer info

77329068000

Lagerstatus: 5
Pris: 450kr
PowerParts|Tool/transport|Tool
Tyre pressure gauge
Comfortable and easy to use. Fits all standard valves. Pressure display in bar or psi. Integrated pressure release valve for accurate pressure adjustment. Disengageable display and work area lighting. Energy-saving function with automatic cut-off. Maximum measuring pressure: 11 bar.
Comfortable and easy to use. Fits all standard valves. Pressure display in bar or psi. Integrated pressure release valve for accurate pressure adjustment. Disengageable display and work area lighting. Energy-saving function with automatic cut-off. Maximum measuring pressure: 11 bar. dölj mer info

54829068000

Lagerstatus: 2
Pris: 335kr
PowerParts|Tool/transport|Tool
Tyre pressure gauge
Easy to use! Measuring range 0 bar – 4 bar. Clamping head rotatable through 90° on a flexible stainless steel feed line. The valve shaft is therefore accessed easily and quickly. Very accurate measurements by way of a durable internal membrane. Internal pressure is reduced after use by a relief valve (push button).
Easy to use! Measuring range 0 bar – 4 bar. Clamping head rotatable through 90° on a flexible stainless steel feed line. The valve shaft is therefore accessed easily and quickly. Very accurate measurements by way of a durable internal membrane. Internal pressure is reduced after use by a relief valve (push button). dölj mer info

81212016100

Lagerstatus: 4
Pris: 115kr
PowerParts|Tool/transport|Tool
Wash cap fuel hose
Use highly recommended when washing the bike thoroughly; in other words, when the fuel tank is removed. Prevents water from entering the fuel line.
Use highly recommended when washing the bike thoroughly; in other words, when the fuel tank is removed. Prevents water from entering the fuel line. dölj mer info

58310025000

Lagerstatus: hos lev.
Pris: 405kr
PowerParts|Tool/transport|Tool
Wheel alignment gauge
The ideal tool for checking perfect wheel position when tensioning the chain.
The ideal tool for checking perfect wheel position when tensioning the chain. dölj mer info

00029015000

Lagerstatus: 1
Pris: 565kr
PowerParts|Tool/transport|Tool
Wire pliers
Recommended, very practical, high quality tool to help you twist safety wire like a professional.
Recommended, very practical, high quality tool to help you twist safety wire like a professional. dölj mer info

U6951277

Lagerstatus: hos lev.
Pris: 2310kr
PowerParts|Tool/transport|Transport
Bike ramp
High quality, folding aluminum ramp with straps for secure attachment on loading. Weighing in at 5.5 kg, it withstands a load of 180 kg. The total length is approx.200 cm, folded approx.100 cm.
High quality, folding aluminum ramp with straps for secure attachment on loading. Weighing in at 5.5 kg, it withstands a load of 180 kg. The total length is approx.200 cm, folded approx.100 cm. dölj mer info

61012016000

Lagerstatus: 4
Pris: 115kr
PowerParts|Tool/transport|Transport
Brake lock
Practical help when loading the bike or jacking it up with the rear wheel lifting device.
Practical help when loading the bike or jacking it up with the rear wheel lifting device. dölj mer info

54829094100

Lagerstatus: 1
Pris: 195kr
PowerParts|Tool/transport|Transport
Fork support
  • Stabilizes your motorcycle during transportation
  • Protects the fork shaft seal rings and fork springs from damage due to overly strong tightening down with lashing straps while transportation
  • Gets clamped in between the tyre and the bottom of the front wheel fender
<ul><li class="li-square">Stabilizes your motorcycle during transportation</li><li class="li-square">Protects the fork shaft seal rings and fork springs from damage due to overly strong tightening down with lashing straps while transportation</li><li class="li-square">Gets clamped in between the tyre and the bottom of the front wheel fender</li></ul> dölj mer info

SXS05125600

Lagerstatus: 6
Pris: 115kr
PowerParts|Tool/transport|Transport
Grip protection set
Prevents dirty grips.
Prevents dirty grips. dölj mer info

77512950200

Lagerstatus: 2
Pris: 450kr
PowerParts|Tool/transport|Transport
Lashing strap set
  • Enables secure attachment to the machine without scratching your handlebars or tank
  • With rubberized hooks and handlebar loops on belt ends
  • 2 units
<ul><li>Enables secure attachment to the machine without scratching your handlebars or tank</li><li>With rubberized hooks and handlebar loops on belt ends</li><li>2 units</li></ul> dölj mer info

77512950300

Lagerstatus: 2
Pris: 195kr
PowerParts|Tool/transport|Transport
Lashing strap set
  • Enables secure attachment to the machine without scratching your handlebars or tank
  • Made from durable ballistic nylon
  • Load capacity of 280 kg
  • With handlebar loops
  • With rubberized hooks on both belt ends
<ul><li class="li-square">Enables secure attachment to the machine without scratching your handlebars or tank</li><li class="li-square">Made from durable ballistic nylon</li><li class="li-square">Load capacity of 280 kg</li><li class="li-square">With handlebar loops</li><li class="li-square">With rubberized hooks on both belt ends</li></ul> dölj mer info

79412950000

Lagerstatus: 4
Pris: 565kr
PowerParts|Tool/transport|Transport
Lashing strap set
  • Enables secure fastening to the machine without scratching your handlebars or tank
  • Made from durable ballistic nylon
  • Load capacity of 280 kg
  • With handlebar loops
  • With a rubberized hook and a carabiner on the belt ends
  • 2 units
<ul><li>Enables secure fastening to the machine without scratching your handlebars or tank</li><li>Made from durable ballistic nylon</li><li>Load capacity of 280 kg</li><li>With handlebar loops</li><li>With a rubberized hook and a carabiner on the belt ends</li><li>2 units</li></ul> dölj mer info

79029930000

Lagerstatus: 1
Pris: 520kr
PowerParts|Tool/transport|Transport
Pit board
To display the most important information to the driver in the race or during training. Incl. white marker pen to write on black backside.
To display the most important information to the driver in the race or during training. Incl. white marker pen to write on black backside. dölj mer info

7811297300099

Lagerstatus: 1
Pris: 915kr
PowerParts|Tool/transport|Transport
Plastic drum
20 liter, KTM transparent plastic canister for use on the racetrack. Includes a flexible hose and screw cap. For legal reasons, not to be used in some countries for storage and transportation of gasoline.
20 liter, KTM transparent plastic canister for use on the racetrack. Includes a flexible hose and screw cap. For legal reasons, not to be used in some countries for storage and transportation of gasoline. dölj mer info

62512007000

Lagerstatus: hos lev.
Pris: 1150kr
PowerParts|Tool/transport|Transport
Protective indoor cover
No hope for dust, scratches, etc. The indoor bike cover turns every KTM into a real eye-catcher in the garage. The fabric consists of a special material with a distinctive structure that is completely impermeable to dust and dirt. The inner side has a soft lining.
No hope for dust, scratches, etc. The indoor bike cover turns every KTM into a real eye-catcher in the garage. The fabric consists of a special material with a distinctive structure that is completely impermeable to dust and dirt. The inner side has a soft lining. dölj mer info

61312007000

Lagerstatus: 1
Pris: 1150kr
PowerParts|Tool/transport|Transport
Protective outdoor cover
The KTM outdoor bike cover guarantees perfect protection all year round. The cover is made from an exclusive, pigmented fabric. Including practical carrier bag.
The KTM outdoor bike cover guarantees perfect protection all year round. The cover is made from an exclusive, pigmented fabric. Including practical carrier bag. dölj mer info

59012007000

Lagerstatus: hos lev.
Pris: 915kr
PowerParts|Tool/transport|Transport
Protective outdoor cover
The KTM outdoor bike cover guarantees perfect protection all year round. The cover is made from an exclusive, pigmented fabric. Including practical carrier bag.
The KTM outdoor bike cover guarantees perfect protection all year round. The cover is made from an exclusive, pigmented fabric. Including practical carrier bag. dölj mer info

79012906100

Lagerstatus: 2
Pris: 1495kr
PowerParts|Tool/transport|Transport
Service pit mat
These mats conform with the official FIM regulations already mandatory on many routes corresponds. The facts:
  • Made from polyester, with special rubberized back
  • Gas and oil resistant
  • In special KTM design
  • Size: 100 x 170 cm
These mats conform with the official FIM regulations already mandatory on many routes corresponds. The facts:<ul><li class="li-disc">Made from polyester, with special rubberized back</li><li class="li-disc"> Gas and oil resistant</li><li class="li-disc">In special KTM design</li><li class="li-disc">Size: 100 x 170 cm</li></ul> dölj mer info

78012006000

Lagerstatus: 2
Pris: 800kr
PowerParts|Tool/transport|Transport
Service pit mat
This mat is already obligatory at many races. The special material mix prevents spilt fuel from seeping into the ground. The mat helps in finding fallen tools, bolts and other small loose parts when servicing outdoors. The special KTM design brings the total factory look to your service zone. Size: 160 cm x 100 cm
This mat is already obligatory at many races. The special material mix prevents spilt fuel from seeping into the ground. The mat helps in finding fallen tools, bolts and other small loose parts when servicing outdoors. The special KTM design brings the total factory look to your service zone. Size: 160 cm x 100 cm dölj mer info

54812004000

Lagerstatus: 2
Pris: 115kr
PowerParts|Tool/transport|Transport
Transport cover
For rear sprockets up to 50T and 220 mm - 260 mm brake discs.
For rear sprockets up to 50T and 220 mm - 260 mm brake discs. dölj mer info

60012016000

Lagerstatus: hos lev.
Pris: 1495kr
PowerParts|Tool/transport|Transport
U-lock
High-quality U-lock made from hardened steel with a double locking mechanism. Locking cylinder with optimum protection against any attempts at manipulation. 250,000 key versions. Two keys supplied as standard. Includes rotating PVC cover that protects the cylinder lock from dirt. High quality corrosion protection.
High-quality U-lock made from hardened steel with a double locking mechanism. Locking cylinder with optimum protection against any attempts at manipulation. 250,000 key versions. Two keys supplied as standard. Includes rotating PVC cover that protects the cylinder lock from dirt. High quality corrosion protection. dölj mer info

72108190000

Lagerstatus: hos lev.
Pris: 1750kr
PowerParts|Trim parts/decals|Decals
Graphics kit
Standard is just not your thing?
Customize your own jaw-dropping motorcycle and stand out from the competition.
Standard is just not your thing?<br />Customize your own jaw-dropping motorcycle and stand out from the competition. dölj mer info

00029949010

Lagerstatus: hos lev.
Pris: 230kr
PowerParts|Trim parts/decals|Decals
Multipack cleaning towel
  • 10 pcs. cleanig towels, packed separately
  • towel size 285 x 200 mm
  • 70% Isopropanol
  • ideal for cleaning of surfaces before application of stickers
<ul><li class="li-square">10 pcs. cleanig towels, packed separately</li><li class="li-square">towel size 285 x 200 mm</li><li class="li-square">70% Isopropanol</li><li class="li-square">ideal for cleaning of surfaces before application of stickers</li></ul> dölj mer info

52000140

Lagerstatus: 1
Pris: 270kr
PowerParts|Trim parts/decals|Decals
Protective fork sticker set
  • Extra thick film
  • Protects the outer tubes against stone impact
<ul><li class="li-square">Extra thick film</li><li class="li-square">Protects the outer tubes against stone impact</li></ul> dölj mer info

322200

Lagerstatus: 1
Pris: 29kr
PowerParts|Trim parts/decals|Decals
Start numbers
13 cm Tall, 3 pieces each
13 cm Tall, 3 pieces each dölj mer info

322100

Lagerstatus: 6
Pris: 29kr
PowerParts|Trim parts/decals|Decals
Start numbers
13 cm Tall, 3 pieces each
13 cm Tall, 3 pieces each dölj mer info

79608978000

Lagerstatus: 27
Pris: 285kr
PowerParts|Trim parts/decals|Decals
Sticker sheet
KTM stickers, made from robust material to stick on your bike, car, trailer, etc. Contains 5 sheets.
KTM stickers, made from robust material to stick on your bike, car, trailer, etc. Contains 5 sheets. dölj mer info

4720801000028

Lagerstatus: hos lev.
Pris: 270kr
PowerParts|Trim parts/decals|Trim parts
Fender
dölj mer info

47208010000EB

Lagerstatus: 1
Pris: 270kr
PowerParts|Trim parts/decals|Trim parts
Fender
dölj mer info

4710109400004

Lagerstatus: 1
Pris: 295kr
PowerParts|Trim parts/decals|Trim parts
Fork protector kit
dölj mer info

4710109400028

Lagerstatus: 2
Pris: 295kr
PowerParts|Trim parts/decals|Trim parts
Fork protector kit
dölj mer info

4720109400028

Lagerstatus: 2
Pris: 295kr
PowerParts|Trim parts/decals|Trim parts
Fork protector kit
dölj mer info

72108001000EB

Lagerstatus: hos lev.
Pris: 335kr
PowerParts|Trim parts/decals|Trim parts
Headlight shroud
dölj mer info

7210800100028

Lagerstatus: hos lev.
Pris: 335kr
PowerParts|Trim parts/decals|Trim parts
Headlight shroud
dölj mer info

7000804100028

Lagerstatus: hos lev.
Pris: 300kr
PowerParts|Trim parts/decals|Trim parts
Side fairing
dölj mer info

7000804200028

Lagerstatus: hos lev.
Pris: 300kr
PowerParts|Trim parts/decals|Trim parts
Side fairing
dölj mer info

7000702505028

Lagerstatus: hos lev.
Pris: 360kr
PowerParts|Trim parts/decals|Trim parts
Side fairing
dölj mer info

7000702505128

Lagerstatus: hos lev.
Pris: 360kr
PowerParts|Trim parts/decals|Trim parts
Side fairing
dölj mer info

7000805400030

Lagerstatus: hos lev.
Pris: 635kr
PowerParts|Trim parts/decals|Trim parts
Spoiler set
dölj mer info

7000811310028

Lagerstatus: hos lev.
Pris: 520kr
PowerParts|Trim parts/decals|Trim parts
Tail section
dölj mer info

7000811310030

Lagerstatus: hos lev.
Pris: 520kr
PowerParts|Trim parts/decals|Trim parts
Tail section
dölj mer info

U6951087

Lagerstatus: 4
Pris: 92kr
PowerParts|Wheels|Special parts
Hub sticker kit
4 pieces 37 mm x31 mm , 4 pieces 48 mm x40 mm.
4 pieces 37 mm x31 mm , 4 pieces 48 mm x40 mm. dölj mer info

7771097605004

Lagerstatus: 8
Pris: 170kr
PowerParts|Wheels|Special parts
Valve cap set
Orange anodized valve caps with valve opening function.
Orange anodized valve caps with valve opening function. dölj mer info

7771097615004

Lagerstatus: 5
Pris: 115kr
PowerParts|Wheels|Special parts
Valve cap set
Orange anodized valve caps.
Orange anodized valve caps. dölj mer info

78009099000

Lagerstatus: 5
Pris: 335kr
PowerParts|Wheels|Special parts
Wheel rim sticker kit
  • For wheel size 18/21"; 19/21"
  • Pre-cut sticker
  • Suitable for front and rear rim
<ul><li class="li-square">For wheel size 18/21"; 19/21"</li><li class="li-square">Pre-cut sticker</li><li class="li-square">Suitable for front and rear rim</li></ul> dölj mer info

78109999000

Lagerstatus: 2
Pris: 335kr
PowerParts|Wheels|Special parts
Wheel rim sticker kit
  • For wheel size 18/21"; 19/21"
  • Pre-cut sticker
  • Suitable for front and rear rim
<ul><li class="li-square">For wheel size 18/21"; 19/21"</li><li class="li-square">Pre-cut sticker</li><li class="li-square">Suitable for front and rear rim</li></ul> dölj mer info

00050000083

Lagerstatus: hos lev.
Pris: 220kr
SpareParts Kits|Oil filter kit
Oil filter kit

The oil filter kit contains all the filters, sieves, O-rings and seals you need for an oil change.

<p>The oil filter kit contains all the filters, sieves, O-rings and seals you need for an oil change.</p> dölj mer info

T1205

Lagerstatus: hos lev.
Pris: 250kr
SpareParts Kits|Suspension tool
Calibrating unit
Tool for calibrating components (DU bush)
Tool for calibrating components (DU bush) dölj mer info

T107S

Lagerstatus: hos lev.
Pris: 325kr
SpareParts Kits|Suspension tool
Depth micrometer
Tool for determining distances
Tool for determining distances dölj mer info

T170S1

Lagerstatus: hos lev.
Pris: 4780kr
SpareParts Kits|Suspension tool
Filling tool
Tool for filling the damper with nitrogen
Tool for filling the damper with nitrogen dölj mer info

T1204

Lagerstatus: hos lev.
Pris: 225kr
SpareParts Kits|Suspension tool
Mounting sleeve
Tool for mounting and pressing out components (dirt scraper, DU bush)
Tool for mounting and pressing out components (dirt scraper, DU bush) dölj mer info

T150S

Lagerstatus: hos lev.
Pris: 450kr
SpareParts Kits|Suspension tool
Mounting tool
Tool for pressing in components (DU bush in seal ring retainer)
Tool for pressing in components (DU bush in seal ring retainer) dölj mer info

T1206

Lagerstatus: hos lev.
Pris: 250kr
SpareParts Kits|Suspension tool
Pressing tool
Tool for pressing in components (heim joint)
Tool for pressing in components (heim joint) dölj mer info

T1207S

Lagerstatus: hos lev.
Pris: 310kr
SpareParts Kits|Suspension tool
Pressing tool
Tool for pressing in components (heim joint)
Tool for pressing in components (heim joint) dölj mer info

00029013018

Lagerstatus: hos lev.
Pris: 570kr
Special tools|Bleeder tool
Bleeder cover
Adapter for hand or foot brake cylinder, for filling or bleeding the brake system
Adapter for hand or foot brake cylinder, for filling or bleeding the brake system dölj mer info

00029013012

Lagerstatus: hos lev.
Pris: 950kr
Special tools|Bleeder tool
Bleeder cover
Adapter for hand or foot brake cylinder, for filling or bleeding the brake system
Adapter for hand or foot brake cylinder, for filling or bleeding the brake system dölj mer info

00029013100

Lagerstatus: hos lev.
Pris: 9040kr
Special tools|Bleeder tool
Bleeding device
Tool for servicing hydraulic brake systems
Tool for servicing hydraulic brake systems dölj mer info

75029047000

Lagerstatus: hos lev.
Pris: 3800kr
Special tools|Crankshaft pressing tool
Crankshaft pressing tool
Tool for pressing the crankshaft together
Tool for pressing the crankshaft together dölj mer info

79029108000

Lagerstatus: hos lev.
Pris: 1860kr
Special tools|Crankshaft pressing tool
Insert for crankshaft pressing tool
Sleeve with cover used as insert in the pressing tool for pressing the crankshaft together
Sleeve with cover used as insert in the pressing tool for pressing the crankshaft together dölj mer info

77229032000

Lagerstatus: hos lev.
Pris: 430kr
Special tools|Crankshaft pressing tool
Separator plate
Tool for pressing out balancer shaft drive gear wheel
Tool for pressing out balancer shaft drive gear wheel dölj mer info

79029009000

Lagerstatus: hos lev.
Pris: 1290kr
Special tools|Crankshaft pressing tool
Separator plate
Tool for separating the crankshaft
Tool for separating the crankshaft dölj mer info

00029014000

Lagerstatus: hos lev.
Pris: 9630kr
Special tools|Electrical system / diagnosis
Cable connector unlocking kit
Pinout kit including case and crimping pliers for repairing wiring harnesses or replacing the most common connectors
Pinout kit including case and crimping pliers for repairing wiring harnesses or replacing the most common connectors dölj mer info

00029095050

Lagerstatus: hos lev.
Pris: 15970kr
Special tools|Electrical system / diagnosis
EU battery charger 
Specially designed battery charger for the correct charging of various 12-V batteries (acid, AGM and lithium-ion), backup operation with diagnosis and flash operations, refresh function at deep discharge, initial charge for the activation of dry batteries, the software can be updated using a dongle
Specially designed battery charger for the correct charging of various 12-V batteries (acid, AGM and lithium-ion), backup operation with diagnosis and flash operations, refresh function at deep discharge, initial charge for the activation of dry batteries, the software can be updated using a dongle dölj mer info

61229001000

Lagerstatus: hos lev.
Pris: 16095kr
Special tools|Engine fixing arm
Engine assembly stand
Tool (incl. chassis, crank rotation mechanism, oil pan, and engine bracket) for mounting the removed engine
Tool (incl. chassis, crank rotation mechanism, oil pan, and engine bracket) for mounting the removed engine dölj mer info

79229002000

Lagerstatus: hos lev.
Pris: 780kr
Special tools|Engine fixing arm
Holder and fitting for work stand
Tool for securing the removed engine on the engine assembly stand
Tool for securing the removed engine on the engine assembly stand dölj mer info

58012009000

Lagerstatus: 3
Pris: 325kr
Special tools|Extractor tool
Puller
Tool for pulling off components (rotor)
Tool for pulling off components (rotor) dölj mer info

58429037037

Lagerstatus: hos lev.
Pris: 620kr
Special tools|Extractor tool
Puller
Tool for pulling off components (inner bearing race of crankshaft)
Tool for pulling off components (inner bearing race of crankshaft) dölj mer info

77229001044

Lagerstatus: hos lev.
Pris: 625kr
Special tools|Extractor tool
Puller
Tool for pulling off components (camshaft gear)
Tool for pulling off components (camshaft gear) dölj mer info

46129021000

Lagerstatus: hos lev.
Pris: 2035kr
Special tools|Extractor tool
Puller
Tool for pulling off components (primary gear wheel, sleeve, main shaft, rotor)
Tool for pulling off components (primary gear wheel, sleeve, main shaft, rotor) dölj mer info

79229048000

Lagerstatus: 1
Pris: 790kr
Special tools|Extractor tool
Puller
Tool for disengaging components (sections of the engine case)
Tool for disengaging components (sections of the engine case) dölj mer info

T14016S

Lagerstatus: hos lev.
Pris: 280kr
Special tools|Fork
Clamping stand
Tool for clamping components (piston rod)
Tool for clamping components (piston rod) dölj mer info

T120

Lagerstatus: hos lev.
Pris: 410kr
Special tools|Fork
Drift
Tool for driving components out (collar bushings)
Tool for driving components out (collar bushings) dölj mer info

T528S

Lagerstatus: hos lev.
Pris: 665kr
Special tools|Fork
Mounting tool
Tool for holding when assembling fork legs
Tool for holding when assembling fork legs dölj mer info

T512

Lagerstatus: hos lev.
Pris: 250kr
Special tools|Fork
Protecting sleeve
Tool for protecting components (inner tube)
Tool for protecting components (inner tube) dölj mer info

T14091

Lagerstatus: hos lev.
Pris: 300kr
Special tools|Fork
Ring wrench
Tool for loosening and tightening components (screw cap)
Tool for loosening and tightening components (screw cap) dölj mer info

T14026S1

Lagerstatus: hos lev.
Pris: 425kr
Special tools|Fork
Support tool
Tool for assembling the fork legs (pulling out piston rod)
Tool for assembling the fork legs (pulling out piston rod) dölj mer info

60029012000

Lagerstatus: hos lev.
Pris: 155kr
Special tools|Measuring tool &amp; setting gauge
clearance gauge
Tool for measuring bearing play
Tool for measuring bearing play dölj mer info

79329006000

Lagerstatus: hos lev.
Pris: 185kr
Special tools|Measuring tool &amp; setting gauge
Banjo bolt
Banjo bolt for pressure testing tool, for checking oil pressure
Banjo bolt for pressure testing tool, for checking oil pressure dölj mer info

59029041100

Lagerstatus: 5
Pris: 115kr
Special tools|Measuring tool &amp; setting gauge
Feeler gauge
Tool for checking and measuring installed gaps
Tool for checking and measuring installed gaps dölj mer info

77329006000

Lagerstatus: 1
Pris: 495kr
Special tools|Measuring tool &amp; setting gauge
Oil pressure adapter
Adapter for pressure testing tool, for checking oil pressure
Adapter for pressure testing tool, for checking oil pressure dölj mer info

61029094000

Lagerstatus: hos lev.
Pris: 2385kr
Special tools|Measuring tool &amp; setting gauge
Pressure testing tool
Tool for checking fuel and oil pressure
Tool for checking fuel and oil pressure dölj mer info

61029093000

Lagerstatus: hos lev.
Pris: 1465kr
Special tools|Measuring tool &amp; setting gauge
Testing hose
Hose for pressure testing tool, for checking the fuel pressure
Hose for pressure testing tool, for checking the fuel pressure dölj mer info

58429094000

Lagerstatus: hos lev.
Pris: 6040kr
Special tools|Measuring tool &amp; setting gauge
Torque wrench kit
Torque wrench with various bits in the kit for tightening fittings to tightening torque (spokes)
Torque wrench with various bits in the kit for tightening fittings to tightening torque (spokes) dölj mer info

50305017000C1

Lagerstatus: 16
Pris: 150kr
Special tools|Other tools
Spring hook
Tool for removing exhaust springs
Tool for removing exhaust springs dölj mer info

50329050000

Lagerstatus: 15
Pris: 220kr
Special tools|Other tools
Syringe
Tool for extracting and adding liquids
Tool for extracting and adding liquids dölj mer info

77729030100

Lagerstatus: 1
Pris: 445kr
Special tools|Piston tool
Insertion for piston ring lock
Tool for installing the piston ring lock in the piston
Tool for installing the piston ring lock in the piston dölj mer info

60029015000

Lagerstatus: hos lev.
Pris: 760kr
Special tools|Piston tool
Piston ring compressor
Tool for tensioning piston rings when installing the piston in the cylinder
Tool for tensioning piston rings when installing the piston in the cylinder dölj mer info

60029057000

Lagerstatus: hos lev.
Pris: 1285kr
Special tools|Pliers
Hose clamp plier
Tool for mounting hose clamps
Tool for mounting hose clamps dölj mer info

51012011000

Lagerstatus: hos lev.
Pris: 415kr
Special tools|Pliers
Lock ring plier
Tool for removing the oil filter
Tool for removing the oil filter dölj mer info

77229010000

Lagerstatus: hos lev.
Pris: 1060kr
Special tools|Pliers
Valve stem seals plier
Tool for removing valve stem seals
Tool for removing valve stem seals dölj mer info

58429091000

Lagerstatus: hos lev.
Pris: 225kr
Special tools|Pressing tool
Pressing tool
Tool for pressing components in (bearing rings when changing steering head bearing)
Tool for pressing components in (bearing rings when changing steering head bearing) dölj mer info

58429092000

Lagerstatus: hos lev.
Pris: 235kr
Special tools|Pressing tool
Pressing tool
Tool for pressing components out (bearing rings when changing steering head bearing)
Tool for pressing components out (bearing rings when changing steering head bearing) dölj mer info

58429089000

Lagerstatus: hos lev.
Pris: 275kr
Special tools|Pressing tool
Tool bracket
Tool for pressing components in and out (bearing rings when changing steering head bearing)
Tool for pressing components in and out (bearing rings when changing steering head bearing) dölj mer info

75029090000

Lagerstatus: 1
Pris: 165kr
Special tools|Protecting sleeves &amp; protection caps
Protection cap
Tool for protecting components (removal of primary gear wheel)
Tool for protecting components (removal of primary gear wheel) dölj mer info

77229031000

Lagerstatus: hos lev.
Pris: 180kr
Special tools|Protecting sleeves &amp; protection caps
Protection cap
Tool for protecting components (removal of balancer shaft drive gear wheel)
Tool for protecting components (removal of balancer shaft drive gear wheel) dölj mer info

T1565

Lagerstatus: hos lev.
Pris: 520kr
Special tools|Shock absorber
Filling adapter
Adapter for filling tool for filling the damper with nitrogen
Adapter for filling tool for filling the damper with nitrogen dölj mer info

T1554

Lagerstatus: hos lev.
Pris: 410kr
Special tools|Shock absorber
Mounting sleeve
Tool for mounting components (seal ring retainer on piston rod)
Tool for mounting components (seal ring retainer on piston rod) dölj mer info

T1504

Lagerstatus: hos lev.
Pris: 270kr
Special tools|Shock absorber
Pressing tool
Tool for positioning components (DU bush in seal ring retainer)
Tool for positioning components (DU bush in seal ring retainer) dölj mer info

T1240S

Lagerstatus: hos lev.
Pris: 38859kr
Special tools|Shock absorber
Vacuum pump
Tool for bleeding and filling dampers
Tool for bleeding and filling dampers dölj mer info

77229172000

Lagerstatus: hos lev.
Pris: 1060kr
Special tools|Spark plug wrench
Spark plug wrench with link
Tool for removing and installing spark plugs
Tool for removing and installing spark plugs dölj mer info

51129003000

Lagerstatus: hos lev.
Pris: 1605kr
Special tools|Support tool
Holding wrench
Tool for holding components (clutch)
Tool for holding components (clutch) dölj mer info

90129051000

Lagerstatus: hos lev.
Pris: 585kr
Special tools|Support tool
Hook wrench
Tool for securing components (steering head bearing)
Tool for securing components (steering head bearing) dölj mer info

77029041200

Lagerstatus: 1
Pris: 330kr
Special tools|Valve and timing tool
Insert for valve spring lever
Tool for installing and removing valves and valve springs
Tool for installing and removing valves and valve springs dölj mer info

77229026000

Lagerstatus: hos lev.
Pris: 260kr
Special tools|Valve and timing tool
Limit plug gauge
Tool for checking valve guides
Tool for checking valve guides dölj mer info

61229021000

Lagerstatus: hos lev.
Pris: 415kr
Special tools|Valve and timing tool
Release device for timing chain tensioner
Tool for installing timing chain tensioner
Tool for installing timing chain tensioner dölj mer info

59029019000

Lagerstatus: hos lev.
Pris: 1155kr
Special tools|Valve and timing tool
Valve spring mounter
Tool for installing and removing valves and valve springs
Tool for installing and removing valves and valve springs dölj mer info

00029XC2009

Lagerstatus: hos lev.
Pris: 1980kr
Special tools|XC_2
12 V power supply cable
External power supply for the VCI for vehicles without battery and for flashing of specific control units
External power supply for the VCI for vehicles without battery and for flashing of specific control units dölj mer info

00029XC2014

Lagerstatus: hos lev.
Pris: 2260kr
Special tools|XC_2
Battery
Battery for the Getac F110 diagnostics tablet
Battery for the Getac F110 diagnostics tablet dölj mer info

00029XC2003

Lagerstatus: hos lev.
Pris: 2105kr
Special tools|XC_2
Battery charger
Battery charger and power supply unit for Getac F110 diagnostics tablet
Battery charger and power supply unit for Getac F110 diagnostics tablet dölj mer info

00029XC2011

Lagerstatus: hos lev.
Pris: 2345kr
Special tools|XC_2
Case
Case including inlay for storing the VCI and all cables and adapters for diagnosis
Case including inlay for storing the VCI and all cables and adapters for diagnosis dölj mer info

00029XC2007

Lagerstatus: hos lev.
Pris: 1845kr
Special tools|XC_2
Diagnostics cable extension
Extension cables between VCI and diagnostic connector on the vehicle
Extension cables between VCI and diagnostic connector on the vehicle dölj mer info

00029XC2002

Lagerstatus: hos lev.
Pris: 945kr
Special tools|XC_2
Hand strap
Handle for diagnostics tablet
Handle for diagnostics tablet dölj mer info

00029XC2015

Lagerstatus: hos lev.
Pris: 960kr
Special tools|XC_2
Input stylus
Stylus for input via the touch screen of the Getac F110 diagnostics tablet
Stylus for input via the touch screen of the Getac F110 diagnostics tablet dölj mer info

00029XC2010

Lagerstatus: hos lev.
Pris: 1185kr
Special tools|XC_2
RideRecorder trigger
Tip switch for triggering a marker while recording measurement data
Tip switch for triggering a marker while recording measurement data dölj mer info

00029XC2008

Lagerstatus: hos lev.
Pris: 895kr
Special tools|XC_2
USB cable
USB cable type A to ODU MINI-SNAP Series L (diagnostics tablet to VCI)
USB cable type A to ODU MINI-SNAP Series L (diagnostics tablet to VCI) dölj mer info

00029XC2005

Lagerstatus: hos lev.
Pris: 260kr
Special tools|XC_2
VCI attachment
Attachment for the VCI incl. attachment for the fuel tank
Attachment for the VCI incl. attachment for the fuel tank dölj mer info