This large-pore air filter cover acts as an additional protective layer, hence extending the filter service interval. Recommended in extremely dusty conditions.
Approvals: CCCUO_EU
This large-pore air filter cover acts as an additional protective layer, hence extending the filter service interval. Recommended in extremely dusty conditions.
Approvals: CCCUO_EU
Användarmanual:
REKOMMENDERADE PRODUKTER
Air filter sand protection
59006922000
59006922000
Lagerstatus:
Pris: 220kr
Köp
Air filter sand protection
Recommended for use on sandy tracks. Installation together with oiled air filter and dry dust guard 77206920100.
Approvals: CCCUO_EU
Recommended for use on sandy tracks. Installation together with oiled air filter and dry dust guard 77206920100.
Approvals: CCCUO_EU
Användarmanual:
PASSAR TILL
Air filter dust protection
77206920100
77206921100
Lagerstatus:
Pris: 110kr
Köp
Air filter water protection
Recommended in extremely wet conditions.
Approvals: CCCUO_EU
Recommended in extremely wet conditions.
Approvals: CCCUO_EU
Användarmanual:
5841301564404
Lagerstatus:
Pris: 6210kr
Köp
4 piston brake caliper
KTM brake calipers are distinguished by the following features:
CNC milled from high-strength solid aluminum
Chrome-plated pad guide pins on the brake caliper
The benefits:
Reduced brake pad canting, hence no uneven wear
Constant braking feel, irrespective of brake pad wear or temperature
No vibration from the brake
Fitting possible on SX/EXC models without adapter, with the original hand pump and brake hose. Can only be fitted with a 17"or 16.5" front wheel. 310 mm brake disc 586.09.060.000 or 250.09.260.000 required. In combination with brake disc 25009260000 (310 mm) no speedometer signal will be sent.
Approvals: CCCUO_EU
Colour: Orange
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
Visa hela beskrivningen
KTM brake calipers are distinguished by the following features:
CNC milled from high-strength solid aluminum
Chrome-plated pad guide pins on the brake caliper
The benefits:
Reduced brake pad canting, hence no uneven wear
Constant braking feel, irrespective of brake pad wear or temperature
No vibration from the brake
Fitting possible on SX/EXC models without adapter, with the original hand pump and brake hose. Can only be fitted with a 17"or 16.5" front wheel. 310 mm brake disc 586.09.060.000 or 250.09.260.000 required. In combination with brake disc 25009260000 (310 mm) no speedometer signal will be sent.
Can be installed on brake caliper supports 77713975044, 79613975044, 7771397501030, 7771397511030, 78113975044, 78113975144, 78113975244, 78913975044 or 78913975144.
Approvals: HOMNN_EU
Surface (PowerParts): Matte finish
Material (PowerParts): Carbon
Visa hela beskrivningen
High stiffness and strength
Made of high-quality carbon
Optimal protection against stone impact
Visual highlight
Optimal protection against stone impact
Can be installed on brake caliper supports 77713975044, 79613975044, 7771397501030, 7771397511030, 78113975044, 78113975144, 78113975244, 78913975044 or 78913975144.
Floating, stainless steel brake disc. The inner ring is made of aluminum to save weight. The pressure point doesn’t change, even when subjected to extreme temperatures and forces. Please note: Combination with 58413014000 not possible! Not for use with 2-piston Brembo® brake caliper.
Approvals: ABE
Colour: Orange
Diameter: 320 mm
Material (PowerParts): Stainless steel
Visa hela beskrivningen
Floating, stainless steel brake disc. The inner ring is made of aluminum to save weight. The pressure point doesn’t change, even when subjected to extreme temperatures and forces. Please note: Combination with 58413014000 not possible! Not for use with 2-piston Brembo® brake caliper.
Approvals: ABE
Colour: Orange
Diameter: 320 mm
Material (PowerParts): Stainless steel
Användarmanual:
77709160000
Lagerstatus:
Pris: 1695kr
Köp
Wave brake disc
Floating
Outer ring made of stainless high-performance brake steel
Inner ring anodised
Minimal wear on brake pads
Approvals: EC-V
Colour: Black
Diameter: 260 mm
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
Alignment: Front
Visa hela beskrivningen
Floating
Outer ring made of stainless high-performance brake steel
Inner ring anodised
Minimal wear on brake pads
Approvals: EC-V
Colour: Black
Diameter: 260 mm
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
Alignment: Front
Användarmanual:
77013920100
Lagerstatus:
Pris: 560kr
Köp
Banjo bolt with bleeder function
With return valve
Anodised dust protection cap
Quick and easy bleeding of the brake
Approvals: HOMNN_EU
Colour: Orange
Material (PowerParts): Aluminium
Alignment: Front
With return valve
Anodised dust protection cap
Quick and easy bleeding of the brake
Approvals: HOMNN_EU
Colour: Orange
Material (PowerParts): Aluminium
Alignment: Front
Användarmanual:
78013920000
Lagerstatus:
Pris: 455kr
Köp
Brake bleeder screw
With return valve
Anodised dust protection cap
Quick and easy bleeding of the brake
Approvals: HOMNN_EU
Colour: Orange
Material (PowerParts): Aluminium
Alignment: Front
With return valve
Anodised dust protection cap
Quick and easy bleeding of the brake
Approvals: HOMNN_EU
Colour: Orange
Material (PowerParts): Aluminium
Alignment: Front
Användarmanual:
77013914000
Lagerstatus:
Pris: 1125kr
Köp
Brake caliper support
Made of high-strength aluminum
Improved braking performance
Only for Brembo brake systems.
Required for using the 320 mm brake disc 58309060000 with Brembo brake caliper
Approvals: HOMNN_EU
Material (PowerParts): Aluminium
Visa hela beskrivningen
Made of high-strength aluminum
Improved braking performance
Only for Brembo brake systems.
Required for using the 320 mm brake disc 58309060000 with Brembo brake caliper
DO YOU KNOW that all KTM CNC parts are manufactured from highest quality aluminum and therefore not only look good, they also withstand the toughest treatment? With the anodized aluminum components in the original factory look from the PowerParts range, you can turn your KTM into something very special.
Approvals: HOMNN_EU
Colour: Orange
Factory Racing: USED BY FACTORY RACING
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
Visa hela beskrivningen
DO YOU KNOW that all KTM CNC parts are manufactured from highest quality aluminum and therefore not only look good, they also withstand the toughest treatment? With the anodized aluminum components in the original factory look from the PowerParts range, you can turn your KTM into something very special.
This plastic protector prevents damage to the water-pump cover and radiator hose in the hose connection area.
Approvals: HOMNN_EU
Colour: Orange
This plastic protector prevents damage to the water-pump cover and radiator hose in the hose connection area.
Approvals: HOMNN_EU
Colour: Orange
Användarmanual:
SXS10450512
Lagerstatus:
Pris: 7455kr
Köp
Akrapovič "Slip-on Line"
This slip-on factory silencer has been developed in collaboration with Akrapovič for the very specific requirements of enduring offroad use (for enduro, motocross and supermoto too) and very carefully tuned to the KTM characteristics. The benefits:
Improved torque curve combined with very rideable peak performance
More sensitive throttle response and resulting improved traction
Durability suitable for extreme enduro use
Made from titanium - that means: ultra-light
Welded on brackets
Reinforced titanium end cap (factory team standard)
Pleasant deep sound
Tuned for compliance with the latest applicable noise regulations
With removable noise reduction insert. Can only be fitted in combination with original header.
Approvals: CCCUO_EU
Factory Racing: USED BY FACTORY RACING
Material (PowerParts): Titanium
Visa hela beskrivningen
This slip-on factory silencer has been developed in collaboration with Akrapovič for the very specific requirements of enduring offroad use (for enduro, motocross and supermoto too) and very carefully tuned to the KTM characteristics. The benefits:
Improved torque curve combined with very rideable peak performance
More sensitive throttle response and resulting improved traction
Durability suitable for extreme enduro use
Made from titanium - that means: ultra-light
Welded on brackets
Reinforced titanium end cap (factory team standard)
Pleasant deep sound
Tuned for compliance with the latest applicable noise regulations
With removable noise reduction insert. Can only be fitted in combination with original header.
Approvals: CCCUO_EU
Factory Racing: USED BY FACTORY RACING
Material (PowerParts): Titanium
Användarmanual:
RESERVDELAR
DUMMY RIVET 4,8X 8,0 NIRO
0011480800
SXS10450517
SXS10450514
SPARKARRESTOR INSERT
SXS07250518
SXS07540509
EXHAUST-SPRING SMALL W. RUBBER
57305016100
ceramic anti-seizing grease
76505099070
COPPER PASTE
76505099060
SXS10450535
Lagerstatus:
Pris: 1245kr
Köp
Heat protection
DID YOU ALREADY KNOW about the special properties of carbon fiber?
Extremely light: 80% lighter than steel with the same strength
Exceptionally stable: Four times more durable than aluminum
Maximum stiffness and tensile strength
Free from corrosion
High longterm temperature durability
Minimal heat expansion
And not least of all it looks just cool
Suitable for assembly with works and original manifolds. Only suitable for assembly with manifolds without resonance body.
Approvals: HOMNN_EU
Material (PowerParts): Carbon
Visa hela beskrivningen
DID YOU ALREADY KNOW about the special properties of carbon fiber?
Extremely light: 80% lighter than steel with the same strength
Exceptionally stable: Four times more durable than aluminum
Maximum stiffness and tensile strength
Free from corrosion
High longterm temperature durability
Minimal heat expansion
And not least of all it looks just cool
Suitable for assembly with works and original manifolds. Only suitable for assembly with manifolds without resonance body.
Approvals: HOMNN_EU
Material (PowerParts): Carbon
54803047000
Lagerstatus:
Pris: 295kr
Köp
Footpeg slider kit
Protects the footpegs from damage during a potential fall
For use with stock foot pegs.
Approvals: HOMNN_EU
Colour: Black
Protects the footpegs from damage during a potential fall
For use with stock foot pegs.
Approvals: HOMNN_EU
Colour: Black
78003940244
Lagerstatus:
Pris: 2255kr
Köp
Pivot Pegz
Move along with weight shift
Permanent contact between boot and footpeg
Extends the service life of your boots
Enlarged tread area
More control
More curve pressure
Easier and faster weight shifting
Easier shifting and braking
Spring-mounted, 20-degree rotational movement possible towards front and rear
Approvals: EC-V
Visa hela beskrivningen
Move along with weight shift
Permanent contact between boot and footpeg
Extends the service life of your boots
Enlarged tread area
More control
More curve pressure
Easier and faster weight shifting
Easier shifting and braking
Spring-mounted, 20-degree rotational movement possible towards front and rear
Adjustable to 3 different heights: 28 mm, 37 mm, 46 mm. Available for handlebar diameters 22 mm and 28 mm.
Approvals: CCCUO_EU
Material (PowerParts): Aluminium
Adjustable to 3 different heights: 28 mm, 37 mm, 46 mm. Available for handlebar diameters 22 mm and 28 mm.
Approvals: CCCUO_EU
Material (PowerParts): Aluminium
Användarmanual:
79701939144
Pris: 560kr
Köp
Handlebar mount kit
Available in five different heights. Included in the kit are 2x handlebar support lower parts and 2x fastening bolts. The upper parts and bolts required for clamping the handlebar are taken from the original handlebar support.
Approvals: EC-V
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
Height (PowerParts): 37
Visa hela beskrivningen
Available in five different heights. Included in the kit are 2x handlebar support lower parts and 2x fastening bolts. The upper parts and bolts required for clamping the handlebar are taken from the original handlebar support.
For conversion from 22 mm-diameter handlebars to handlebars with a diameter of 28 mm.
Approvals: CCCUO_EU
Material (PowerParts): Aluminium
For conversion from 22 mm-diameter handlebars to handlebars with a diameter of 28 mm.
Approvals: CCCUO_EU
Material (PowerParts): Aluminium
77701939020
Pris: 675kr
Köp
Handlebar riser
These CNC-machined, high-strength aluminum handlebar risers are extremely robust thanks to their special screw fastening (from below) on the triple clamp. Twisting and bending are therefore practically impossible. Use of these handlebar risers is only possible on CNC-machined triple clamps. Available in three different heights.
Approvals: CCCUO_EU
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
Height (PowerParts): 20
Visa hela beskrivningen
These CNC-machined, high-strength aluminum handlebar risers are extremely robust thanks to their special screw fastening (from below) on the triple clamp. Twisting and bending are therefore practically impossible. Use of these handlebar risers is only possible on CNC-machined triple clamps. Available in three different heights.
Approvals: CCCUO_EU
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
Height (PowerParts): 20
RESERVDELAR
HH COLLAR SCREW M 8X30 WS=10
0025080306
54801043020
Lagerstatus:
Pris: 345kr
Köp
Handlebar riser
Can only be fitted in combination with handlebar support 5900103920001S (standard on EXC models up to MY 2011).
Approvals: CCCUO_EU
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
Height (PowerParts): 20
Visa hela beskrivningen
Can only be fitted in combination with handlebar support 5900103920001S (standard on EXC models up to MY 2011).
Tested in complex and specially-developed test cycles
Position markings for easy adjustment
Dimensions: A = 115 mm, B = 806 mm, C = 62 mm
Approvals: CCCUO_EU
Colour: Orange
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
Visa hela beskrivningen
Made of high-strength aluminum
Tested in complex and specially-developed test cycles
Position markings for easy adjustment
Dimensions: A = 115 mm, B = 806 mm, C = 62 mm
Approvals: CCCUO_EU
Colour: Orange
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
26202901000
Lagerstatus:
Pris: 2255kr
Köp
ProTaper handlebar
Upgrade your bike with this factory handlebar and make use of the advantages of an adjustable crossbar, depending on the track ground:
When locked, the crossbar is solid (stiff)
When unlocked, the crossbar is flexible
Dimensions: A = 112 mm, B = 811 mm, C = 88 mm
Approvals: CCCUO_EU
Diameter: 28 mm
Factory Racing: USED BY FACTORY RACING
Visa hela beskrivningen
Upgrade your bike with this factory handlebar and make use of the advantages of an adjustable crossbar, depending on the track ground:
When locked, the crossbar is solid (stiff)
When unlocked, the crossbar is flexible
Dimensions: A = 112 mm, B = 811 mm, C = 88 mm
Approvals: CCCUO_EU
Diameter: 28 mm
Factory Racing: USED BY FACTORY RACING
7950290100004
Lagerstatus:
Pris: 2265kr
Köp
Renthal Twinwall handlebar
The Twinwall, in the KTM orange design
Two handlebars in one
The exterior ensures maximum resistance to external damage (e.g. fall)
Additionally hard anodised against corrosion
The interior, made of a special alloy, is also hard anodised to protect it from damage by the handlebar controls.
Nylon inserts in the inner tube allow thinner walls
Very good flex properties
Comes with handlebar pad
Renthal Twinwall 996
Dimensions: A = 118 mm, B = 811 mm, C = 74 mm
Approvals: CCCUO_EU
Colour: Orange
Factory Racing: USED BY FACTORY RACING
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
Visa hela beskrivningen
The Twinwall, in the KTM orange design
Two handlebars in one
The exterior ensures maximum resistance to external damage (e.g. fall)
Additionally hard anodised against corrosion
The interior, made of a special alloy, is also hard anodised to protect it from damage by the handlebar controls.
Nylon inserts in the inner tube allow thinner walls
Very good flex properties
Comes with handlebar pad
Renthal Twinwall 996
Dimensions: A = 118 mm, B = 811 mm, C = 74 mm
Approvals: CCCUO_EU
Colour: Orange
Factory Racing: USED BY FACTORY RACING
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
79502901000C1
Lagerstatus:
Pris: 2265kr
Köp
Renthal Twinwall handlebar
Two handlebars in one
The exterior ensures maximum resistance to external damage (e.g. fall)
Additionally hard anodised against corrosion
The interior, made of a special alloy, is also hard anodised to protect it from damage by the handlebar controls.
Nylon inserts in the inner tube allow thinner walls
Very good flex properties
Comes with handlebar pad
Renthal Twinwall 996
Dimensions: A = 118 mm, B = 811 mm, C = 74 mm
Approvals: CCCUO_EU
Colour: Black
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
Visa hela beskrivningen
Two handlebars in one
The exterior ensures maximum resistance to external damage (e.g. fall)
Additionally hard anodised against corrosion
The interior, made of a special alloy, is also hard anodised to protect it from damage by the handlebar controls.
Nylon inserts in the inner tube allow thinner walls
Very good flex properties
Comes with handlebar pad
Renthal Twinwall 996
Dimensions: A = 118 mm, B = 811 mm, C = 74 mm
Approvals: CCCUO_EU
Colour: Black
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
25-9991-04
Lagerstatus:
Pris: 2549kr
Köp
Renthal Twinwall handlebar
The Twinwall, in the KTM orange design
Two handlebars in one
The exterior ensures maximum resistance to external damage (e.g. fall)
Additionally hard anodised against corrosion
The interior, made of a special alloy, is also hard anodised to protect it from damage by the handlebar controls.
Nylon inserts in the inner tube allow thinner walls
Very good flex properties
Comes with handlebar pad
Renthal Twinwall 999
Dimensions: A = 104 mm, B = 811 mm, C = 74 mm
Approvals: CCCUO_EU
Colour: Orange
Factory Racing: USED BY FACTORY RACING
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
Visa hela beskrivningen
The Twinwall, in the KTM orange design
Two handlebars in one
The exterior ensures maximum resistance to external damage (e.g. fall)
Additionally hard anodised against corrosion
The interior, made of a special alloy, is also hard anodised to protect it from damage by the handlebar controls.
Nylon inserts in the inner tube allow thinner walls
Very good flex properties
Comes with handlebar pad
Renthal Twinwall 999
Dimensions: A = 104 mm, B = 811 mm, C = 74 mm
Approvals: CCCUO_EU
Colour: Orange
Factory Racing: USED BY FACTORY RACING
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
77711979000
Lagerstatus:
Pris: 175kr
Köp
Auxiliary wiring harness
Enables power consumers such as grip heater or radiator fans to be installed on motocross or cross-country models as well
The power consumer is now connected directly to the battery. Consequently, the battery is also drained when the engine is not running, unless the consumer is switched off.
Approvals: HOMNN_EU
Visa hela beskrivningen
Enables power consumers such as grip heater or radiator fans to be installed on motocross or cross-country models as well
The power consumer is now connected directly to the battery. Consequently, the battery is also drained when the engine is not running, unless the consumer is switched off.
Approvals: HOMNN_EU
REKOMMENDERADE PRODUKTER
Auxiliary wiring harness
77711979010
Auxiliary wiring harness
77711979044
77711979010
Lagerstatus:
Pris: 100kr
Köp
Auxiliary wiring harness
The Y-distributor allows you to connect two power consumers to auxiliary wiring harness 77711979000.
Approvals: HOMNN_EU
The Y-distributor allows you to connect two power consumers to auxiliary wiring harness 77711979000.
Approvals: HOMNN_EU
REKOMMENDERADE PRODUKTER
Auxiliary wiring harness
77711979000
77711979044
Lagerstatus:
Pris: 325kr
Köp
Auxiliary wiring harness
The Y-distributor allows you to connect two power consumers to auxiliary wiring harness 77711979000. The connected power consumer can be switched off with the integrated switch. This prevents the battery from being drained unnecessarily.
Approvals: HOMNN_EU
Visa hela beskrivningen
The Y-distributor allows you to connect two power consumers to auxiliary wiring harness 77711979000. The connected power consumer can be switched off with the integrated switch. This prevents the battery from being drained unnecessarily.
With this bracket the pull switch has an accessible, defined location. Recommended in combination with the Y-DISTRIBUTOR SWITCH 77711979044.
Approvals: HOMNN_EU
Material (PowerParts): Stainless steel
With this bracket the pull switch has an accessible, defined location. Recommended in combination with the Y-DISTRIBUTOR SWITCH 77711979044.
Approvals: HOMNN_EU
Material (PowerParts): Stainless steel
REKOMMENDERADE PRODUKTER
Auxiliary wiring harness
77711979044
7800293120004
Lagerstatus:
Pris: 295kr
Köp
Clutch lever
CNC milled from high-strength aluminum
Elegant anodised surface
Visual highlight with technical and ergonomic added value
Ergonomically perfect shape (the result of years of racing experience)
Adjustable grip width
Suitable for all hydraulic Brembo® clutch mountings.
Approvals: HOMNN_EU
Colour: Orange
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
Weight: 0.055
Visa hela beskrivningen
CNC milled from high-strength aluminum
Elegant anodised surface
Visual highlight with technical and ergonomic added value
Ergonomically perfect shape (the result of years of racing experience)
Adjustable grip width
Suitable for all hydraulic Brembo® clutch mountings.
Approvals: HOMNN_EU
Colour: Orange
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
Weight: 0.055
Användarmanual:
REKOMMENDERADE PRODUKTER
7801390200004
Brake lever
7871399204404
77702944000
Lagerstatus:
Pris: 220kr
Köp
Clamp
CNC milled from high-strength aluminum
Elegant anodised surface
Visual highlight
Including plastic insert
Reduces the risk of a lever being broken
Suitable for all Brembo® and Formula brake and clutch assembles
Approvals: HOMNN_EU
Colour: Orange
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
Visa hela beskrivningen
CNC milled from high-strength aluminum
Elegant anodised surface
Visual highlight
Including plastic insert
Reduces the risk of a lever being broken
Suitable for all Brembo® and Formula brake and clutch assembles
Approvals: HOMNN_EU
Colour: Orange
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
54802005000
Lagerstatus:
Pris: 175kr
Köp
Handlebar ends
CNC milled from high-strength aluminum
Elegant anodised surface
Visual highlight
Prevents the hand grips from chafing in the event of a fall
Approvals: HOMNN_EU
Colour: Orange
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
Visa hela beskrivningen
CNC milled from high-strength aluminum
Elegant anodised surface
Visual highlight
Prevents the hand grips from chafing in the event of a fall
Approvals: HOMNN_EU
Colour: Orange
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
RESERVDELAR
FLAT HEAD SCREW DIN7991-M 6X50
0991060503
hex nut DIN 934 M6
0934060003
79002901050
Lagerstatus:
Pris: 435kr
Köp
Handlebar pad
Already mandatory in many competitions
Provides optimum protection
Visual highlight
With the integrated card holder you always have the time in view. A small extra pocket allows you to stow small items. Can also be fitted in combination with the PHDS-handlebar support.
Approvals: HOMNN_EU
Colour: Orange
Visa hela beskrivningen
Already mandatory in many competitions
Provides optimum protection
Visual highlight
With the integrated card holder you always have the time in view. A small extra pocket allows you to stow small items. Can also be fitted in combination with the PHDS-handlebar support.
Includes an anti vibration module which decouples the smartphone from the bracket / motorcycle with a specific developed elastomer inlay. It reduces the transfer of vibrations, generated by the motorcycle, to the smartphone and protects it`s sensitive components.
Can be mounted on older versions of the smartphone bracket to adapt it to the new "SPC+" mounting system
Approvals: HOMNN_EU
Colour: Black
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
Visa hela beskrivningen
Includes an anti vibration module which decouples the smartphone from the bracket / motorcycle with a specific developed elastomer inlay. It reduces the transfer of vibrations, generated by the motorcycle, to the smartphone and protects it`s sensitive components.
Can be mounted on older versions of the smartphone bracket to adapt it to the new "SPC+" mounting system
Approvals: HOMNN_EU
Colour: Black
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
REKOMMENDERADE PRODUKTER
Smartphone case
A62412991040
Smartphone case
A62412991050
Smartphone case
A62412991060
Smartphone case
A62412991070
00010000423
00010000424
PASSAR TILL
Smartphone bracket
61712994400
61712994100
61712991100
62002903150
Lagerstatus:
Pris: 230kr
Köp
GPS bag
For waterproof storage of documents, maps, cellphones, navigation devices etc.
Suitable for all KTM GPS holders. Size: 170 x 130 x 35 mm
Approvals: HOMNN_EU
Colour: Black
For waterproof storage of documents, maps, cellphones, navigation devices etc.
Suitable for all KTM GPS holders. Size: 170 x 130 x 35 mm
Approvals: HOMNN_EU
Colour: Black
Användarmanual:
PASSAR TILL
61312992044
90512992044
GPS bracket
76012992244
GPS bracket
93002903100
GPS bracket
61512992044
93002903100
Lagerstatus:
Pris: 735kr
Köp
GPS bracket
Suitable for all Garmin GPS devices
Suitable for all TomTom GPS devices
Suitable for the Touratech iBracket
Mounting on the standard handlebar clamps
Approvals: HOMNN_EU
Colour: Black
Suitable for all Garmin GPS devices
Suitable for all TomTom GPS devices
Suitable for the Touratech iBracket
Mounting on the standard handlebar clamps
Approvals: HOMNN_EU
Colour: Black
Användarmanual:
REKOMMENDERADE PRODUKTER
GPS bag
62002903150
Touratech-iBracket
60412993400
Touratech-iBracket
60412993500
60412993600
Touratech-iBracket
60412993700
60412993800
60412993900
60112092070
Lagerstatus:
Pris: 345kr
Köp
Handlebar cross brace
Universally applicable for mounting the GPS bracket
Approvals: HOMNN_EU
Material (PowerParts): Aluminium
Universally applicable for mounting the GPS bracket
Universal and inconspicuous bracket for your smartphone
Optimal solution for quick and secure fastening of your smartphone on the vehicle
Can be clamped on the handlebar (including different adapter). The arm can be rotated in any position for the perfect position for your smartphone.
Includes also a anti vibration module which decouples the smartphone from the bracket / motorcycle with a specific developed elastomer inlay. It reduces the transfer of vibrations, generated by the motorcycle, to the smartphone and protects it`s sensitive components.
New "SPC+" mounting system
Approvals: HOMNN_EU
Colour: Black
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
Visa hela beskrivningen
Universal and inconspicuous bracket for your smartphone
Optimal solution for quick and secure fastening of your smartphone on the vehicle
Can be clamped on the handlebar (including different adapter). The arm can be rotated in any position for the perfect position for your smartphone.
Includes also a anti vibration module which decouples the smartphone from the bracket / motorcycle with a specific developed elastomer inlay. It reduces the transfer of vibrations, generated by the motorcycle, to the smartphone and protects it`s sensitive components.
New "SPC+" mounting system
Approvals: HOMNN_EU
Colour: Black
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
REKOMMENDERADE PRODUKTER
Smartphone case
A62412991040
Smartphone case
A62412991050
Smartphone case
A62412991060
Smartphone case
A62412991070
00010000423
00010000424
61712992800
Pris från: 510kr
Köp
Smartphone case
Smartphone can be easily removed with its cover
Protects your valuable smartphone
Optimal solution for quick and secure fastening of your smartphone on the vehicle
Approvals: HOMNN_EU
Colour: Black
Smartphone: IPhone 11 PRO
Visa hela beskrivningen
Smartphone can be easily removed with its cover
Protects your valuable smartphone
Optimal solution for quick and secure fastening of your smartphone on the vehicle
Approvals: HOMNN_EU
Colour: Black
Smartphone: IPhone 11 PRO
Användarmanual:
REKOMMENDERADE PRODUKTER
Smartphone bracket
61712994400
A62412991040
Pris: 570kr
Köp
Smartphone case
Protects your valuable smartphone
Optimal solution for quick and secure fastening of your smartphone on the vehicle
Smartphone can be easily removed with its cover
New "SPC+" mounting system, but there is also an adapter included to mount the case also on the previous mounting system.
Including a magnetic ring, so the case is also "MagSafe" compatible.
Extremely slim design, 40% thinner compared to the previous smartphone case generation.
Approvals: HOMNN_EU
Colour: Black
Smartphone: IPhone14
Visa hela beskrivningen
Protects your valuable smartphone
Optimal solution for quick and secure fastening of your smartphone on the vehicle
Smartphone can be easily removed with its cover
New "SPC+" mounting system, but there is also an adapter included to mount the case also on the previous mounting system.
Including a magnetic ring, so the case is also "MagSafe" compatible.
Extremely slim design, 40% thinner compared to the previous smartphone case generation.
Approvals: HOMNN_EU
Colour: Black
Smartphone: IPhone14
REKOMMENDERADE PRODUKTER
Smartphone bracket
A62412992010
Smartphone adapter
A62412992020
00010000423
00010000424
61712991400
Lagerstatus:
Pris: 510kr
Köp
Smartphone case HUAWEI Mate 20 Pro
Smartphone can be easily removed with its cover
Protects your valuable smartphone
Optimal solution for quick and secure fastening of your smartphone on the vehicle
Approvals: HOMNN_EU
Colour: Black
Smartphone: HUAWEI Mate 20 Pro
Visa hela beskrivningen
Smartphone can be easily removed with its cover
Protects your valuable smartphone
Optimal solution for quick and secure fastening of your smartphone on the vehicle
Approvals: HOMNN_EU
Colour: Black
Smartphone: HUAWEI Mate 20 Pro
Användarmanual:
REKOMMENDERADE PRODUKTER
Weather protection cover HUAWEI Mate 20 Pro
61712992700
Smartphone bracket
61712994400
61712991300
Lagerstatus:
Pris: 510kr
Köp
Smartphone case iPhone XR
Smartphone can be easily removed with its cover
Protects your valuable smartphone
Optimal solution for quick and secure fastening of your smartphone on the vehicle
Approvals: HOMNN_EU
Colour: Black
Smartphone: IPhone XR
Visa hela beskrivningen
Smartphone can be easily removed with its cover
Protects your valuable smartphone
Optimal solution for quick and secure fastening of your smartphone on the vehicle
DO YOU KNOW about the benefits of the KTM case guard?
Prevents damage to the engine case in the event of the chain breaking
No pulling-in of stones between chain and engine case (material-friendly)
CNC-machined from high-strength aluminum
Best possible and effective protection for the clutch slave cylinder
Approvals: HOMNN_EU
Material (PowerParts): Aluminium
Visa hela beskrivningen
DO YOU KNOW about the benefits of the KTM case guard?
Prevents damage to the engine case in the event of the chain breaking
No pulling-in of stones between chain and engine case (material-friendly)
CNC-machined from high-strength aluminum
Best possible and effective protection for the clutch slave cylinder
Approvals: HOMNN_EU
Material (PowerParts): Aluminium
77203990200
Lagerstatus:
Pris: 1125kr
Köp
Skid plate
This generation of KTM aluminum skid plates offers the most effective protection for frame and engine:
Exceptionally robust rear fastening clamp
Made of 4 mm strong, high-tensile, robust aluminum
Extremely durable and endurance-tested for the toughest off-road use
Custom design - specifically developed for KTM models
Highest grade quality workmanship
Simple and quick assembly
Approvals: HOMNN_EU
Material (PowerParts): Aluminium
Visa hela beskrivningen
This generation of KTM aluminum skid plates offers the most effective protection for frame and engine:
Exceptionally robust rear fastening clamp
Made of 4 mm strong, high-tensile, robust aluminum
Extremely durable and endurance-tested for the toughest off-road use
Custom design - specifically developed for KTM models
Highest grade quality workmanship
Simple and quick assembly
Approvals: HOMNN_EU
Material (PowerParts): Aluminium
REKOMMENDERADE PRODUKTER
Foam rubber
59003990250
RESERVDELAR
SHIMSTRIPE 1000X11X3
78103190030
77203990150
BRACKET SKID-PLATE
77203990060
HH COLLAR SCREW M 6X15 WS=8
0024060156
78907940050
Lagerstatus:
Pris: 965kr
Köp
Factory Racing seat cover
This seat cover with transversely stitched ribs ensures maximum support with unrestricted freedom of movement thanks to its special design. For standard height seats.
Approvals: HOMNN_EU
Colour: Blue
Factory Racing: USED BY FACTORY RACING
Visa hela beskrivningen
This seat cover with transversely stitched ribs ensures maximum support with unrestricted freedom of movement thanks to its special design. For standard height seats.
With its blue cover, this seat suits the current factory-style graphics kits. Standard height.
Approvals: HOMNN_EU
Colour: Blue
With its blue cover, this seat suits the current factory-style graphics kits. Standard height.
Approvals: HOMNN_EU
Colour: Blue
RESERVDELAR
SEAT COVER BLUE
77707040150
77207940900
Lagerstatus:
Pris: 1690kr
Köp
Factory seat
This seat provides great freedom of movement, but still a perfect hold. The "wave surface" acts as a step even though it isn't one. Standard height.
Approvals: HOMNN_EU
Colour: Black
This seat provides great freedom of movement, but still a perfect hold. The "wave surface" acts as a step even though it isn't one. Standard height.
Approvals: HOMNN_EU
Colour: Black
RESERVDELAR
SEAT COVER WAVE
77207940550
77707940050
Lagerstatus:
Pris: 965kr
Köp
Factory seat cover
What backs up the rear of Cairoli and Co on the bike? No-less than this waffle-shaped and extremely robust factory seat cover. Why not try it out yourself? For standard height seats.
Approvals: HOMNN_EU
Colour: Black
What backs up the rear of Cairoli and Co on the bike? No-less than this waffle-shaped and extremely robust factory seat cover. Why not try it out yourself? For standard height seats.
Approvals: HOMNN_EU
Colour: Black
77207940600
Lagerstatus:
Pris: 1690kr
Köp
Seat
Also provides shorter riders with optimum control of the motorcycle in difficult terrain. Approx. 15 mm lower than the standard seat.
Approvals: HOMNN_EU
Height (PowerParts): -15
Also provides shorter riders with optimum control of the motorcycle in difficult terrain. Approx. 15 mm lower than the standard seat.
Approvals: HOMNN_EU
Height (PowerParts): -15
RESERVDELAR
77207940050
79407978000
Lagerstatus:
Pris: 130kr
Köp
Seat pocket
Recommended for storing your timecard during races. Stick it directly to the seat with grip glue.
Approvals: HOMNN_EU
Recommended for storing your timecard during races. Stick it directly to the seat with grip glue.
Approvals: HOMNN_EU
REKOMMENDERADE PRODUKTER
Grip glue
00062030051
77207940800
Lagerstatus:
Pris: 1575kr
Köp
Step up seat
The factory rider seat: Thanks to the special step, there's no slipping backwards when you open up the throttle. Standard height.
Approvals: HOMNN_EU
Colour: Black
The factory rider seat: Thanks to the special step, there's no slipping backwards when you open up the throttle. Standard height.
Approvals: HOMNN_EU
Colour: Black
RESERVDELAR
77207940050
78913914100
Lagerstatus:
Pris: 1125kr
Köp
Brake caliper support
Made of high-strength aluminum
Improved braking performance
Required for using a 270 mm brake disc and 2-piston Brembo brake caliper.
Approvals: HOMNN_EU
Colour: Black
Surface (PowerParts): Anodized
Visa hela beskrivningen
Made of high-strength aluminum
Improved braking performance
Required for using a 270 mm brake disc and 2-piston Brembo brake caliper.
The perfect alternative tool on the go. Conveniently packaged in a small bag you can use the tool for following fittings: 14, 12, 10, 8 mm hexagon sockets; 6, 8, 13 mm socket wrench; Inserts for slotted and Phillips screw heads, 5 mm / 6 mm Allen keys, 25/30 and 40/45 Torx; bottle opener; Option for attaching for 3/8 "and 1/4" socket wrench.
Approvals: HOMNN_EU
Visa hela beskrivningen
The perfect alternative tool on the go. Conveniently packaged in a small bag you can use the tool for following fittings: 14, 12, 10, 8 mm hexagon sockets; 6, 8, 13 mm socket wrench; Inserts for slotted and Phillips screw heads, 5 mm / 6 mm Allen keys, 25/30 and 40/45 Torx; bottle opener; Option for attaching for 3/8 "and 1/4" socket wrench.
Approvals: HOMNN_EU
Användarmanual:
7802906500004
Lagerstatus:
Pris: 110kr
Köp
Oil bottle
Perfect for all 2-stroke riders on the move. The small bottle fits in your tool bag or jacket. Capacity 250 ml, with scaling for different mixture ratios (1 : 40 / 2.5 %; 1 : 50 / 2 %; 1 : 60 / 1.7 %; 1 : 80 / 1.25 %)
Approvals: HOMNN_EU
Colour: Transparent
Volume: 0.25
Visa hela beskrivningen
Perfect for all 2-stroke riders on the move. The small bottle fits in your tool bag or jacket. Capacity 250 ml, with scaling for different mixture ratios (1 : 40 / 2.5 %; 1 : 50 / 2 %; 1 : 60 / 1.7 %; 1 : 80 / 1.25 %)
On this spoke wrench, the torque is preset at 6 Nm. This prevents over-tightening of the spoke nipples. Too much torque when tightening the spoke nipples is the most frequent cause of broken spokes. Wrench size 6.8 mm.
Approvals: HOMNN_EU
Visa hela beskrivningen
On this spoke wrench, the torque is preset at 6 Nm. This prevents over-tightening of the spoke nipples. Too much torque when tightening the spoke nipples is the most frequent cause of broken spokes. Wrench size 6.8 mm.
There's racing experience here as well! Practical tyre lever set, consisting of
3 x short version 51012092100
3 x long version 51012093100
Approvals: HOMNN_EU
Colour: Black
Material (PowerParts): Steel
Visa hela beskrivningen
There's racing experience here as well! Practical tyre lever set, consisting of
3 x short version 51012092100
3 x long version 51012093100
Approvals: HOMNN_EU
Colour: Black
Material (PowerParts): Steel
58312078000
Lagerstatus:
Pris: 175kr
Köp
Tool bag
The optimum solution for always having the most important tools to hand when on the road.
Approvals: HOMNN_EU
The optimum solution for always having the most important tools to hand when on the road.
Approvals: HOMNN_EU
00029098400
Lagerstatus:
Pris: 2030kr
Köp
Toolbox
60-piece, 3/8" toolbox in orange with high-quality, chrome-vanadium tools. Content:
Ratchet (with locking device), lever, two extensions and socket wrench
Hexagon sockets from 6 to 24
Allen keys from 3 to 10
Phillips and slotted bits
Torx bits from 15 to 55
With this, small jobs on your KTM can be completed quickly and reliably. Whether you're removing fairings or changing the oil, you'll definitely find the right tool here.
Approvals: HOMNN_EU
Colour: Orange
Visa hela beskrivningen
60-piece, 3/8" toolbox in orange with high-quality, chrome-vanadium tools. Content:
Ratchet (with locking device), lever, two extensions and socket wrench
Hexagon sockets from 6 to 24
Allen keys from 3 to 10
Phillips and slotted bits
Torx bits from 15 to 55
With this, small jobs on your KTM can be completed quickly and reliably. Whether you're removing fairings or changing the oil, you'll definitely find the right tool here.
Approvals: HOMNN_EU
Colour: Orange
00029098300
Lagerstatus:
Pris: 855kr
Köp
Toolbox
38-piece, 1/4" toolbox in orange with high-quality, chrome-vanadium tools. Content:
Ratchet (with locking device), lever, two extensions and socket wrench
Hexagon sockets from 4 to 14
Allen keys from 3 to 8
Phillips, slotted and Torx bits
With this, small jobs on your KTM can be completed quickly and reliably. Whether you're removing fairings or changing the oil, you'll definitely find the right tool here.
Approvals: HOMNN_EU
Visa hela beskrivningen
38-piece, 1/4" toolbox in orange with high-quality, chrome-vanadium tools. Content:
Ratchet (with locking device), lever, two extensions and socket wrench
Hexagon sockets from 4 to 14
Allen keys from 3 to 8
Phillips, slotted and Torx bits
With this, small jobs on your KTM can be completed quickly and reliably. Whether you're removing fairings or changing the oil, you'll definitely find the right tool here.
Approvals: HOMNN_EU
00029996000
Lagerstatus:
Pris: 3040kr
Köp
Torque wrench
High-quality, adjustable torque wrench 5-25 NM, including the following accessories:
Push-on spoke wrenches in sizes 5.65 and 6.95 mm
Push-on ratchet ¼"
Ratchet attachments: 6, 8, 10 mm socket wrench, 15 Torx
Approvals: HOMNN_EU
Visa hela beskrivningen
High-quality, adjustable torque wrench 5-25 NM, including the following accessories:
Push-on spoke wrenches in sizes 5.65 and 6.95 mm
Push-on ratchet ¼"
Ratchet attachments: 6, 8, 10 mm socket wrench, 15 Torx
Approvals: HOMNN_EU
78129984000
Lagerstatus:
Pris: 1125kr
Köp
Tyre lever kit
Made of high strength, orange anodized aluminum; not suitable for tire mounting with mousse. With integrated ring wrench SW 32, 27, 17, 13 and 10 mm.
Approvals: HOMNN_EU
Colour: Orange
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
Visa hela beskrivningen
Made of high strength, orange anodized aluminum; not suitable for tire mounting with mousse. With integrated ring wrench SW 32, 27, 17, 13 and 10 mm.
Approvals: HOMNN_EU
Colour: Orange
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
77329068000
Lagerstatus:
Pris: 455kr
Köp
Tyre pressure gauge
Comfortable and easy to use
Fits all standard valves. Pressure display in bar or psi
Integrated pressure release valve for accurate pressure adjustment
Disengageable display and work area lighting
Energy-saving function with automatic cut-off
Maximum measuring pressure: 11 bar
Approvals: HOMNN_EU
Colour: Black
Visa hela beskrivningen
Comfortable and easy to use
Fits all standard valves. Pressure display in bar or psi
Integrated pressure release valve for accurate pressure adjustment
Disengageable display and work area lighting
Energy-saving function with automatic cut-off
Maximum measuring pressure: 11 bar
Approvals: HOMNN_EU
Colour: Black
Användarmanual:
54829068000
Lagerstatus:
Pris: 345kr
Köp
Tyre pressure gauge
Easy to use! Measuring range 0 bar – 4 bar. Clamping head rotatable through 90° on a flexible stainless steel feed line. The valve shaft is therefore accessed easily and quickly. Very accurate measurements by way of a durable internal membrane. Internal pressure is reduced after use by a relief valve (push button).
Approvals: HOMNN_EU
Visa hela beskrivningen
Easy to use! Measuring range 0 bar – 4 bar. Clamping head rotatable through 90° on a flexible stainless steel feed line. The valve shaft is therefore accessed easily and quickly. Very accurate measurements by way of a durable internal membrane. Internal pressure is reduced after use by a relief valve (push button).