450 EXC SIX DAYS (2010) POWERPARTS & ACCESSORIES

308088

Lagerstatus: 8
Pris: 71kr
Marketing Material|Merchandising Material
KTM Adhesive tape
  • Orange with KTM logo
  • 50 mm wide & 99 m long
<ul><li class="li-square">Orange with KTM logo</li><li class="li-square">50 mm wide &amp; 99 m long</li></ul> dölj mer info

59006019000

Lagerstatus: 2
Pris: 115kr
PowerParts|Air filter
Air filter dust protection
This large-pored air filter cover acts as an additional protective layer, hence extending the filter service interval. Recommended in extremely dusty conditions.
This large-pored air filter cover acts as an additional protective layer, hence extending the filter service interval. Recommended in extremely dusty conditions. dölj mer info

59006922000

Lagerstatus: 7
Pris: 195kr
PowerParts|Air filter
Air filter sand protection
Recommended for use on sandy tracks. Installation together with oiled air filter and dry dust guard 77206920100.
Recommended for use on sandy tracks. Installation together with oiled air filter and dry dust guard 77206920100. dölj mer info

59006021000

Lagerstatus: 4
Pris: 115kr
PowerParts|Air filter
Air filter water protection
Recommended in extremely wet conditions.
Recommended in extremely wet conditions. dölj mer info

59006922000

Lagerstatus: 7
Pris: 195kr
PowerParts|Archive
Air filter sand protection
Recommended for use on sandy tracks. Installation together with oiled air filter and dry dust guard 590.06.019.000.
Recommended for use on sandy tracks. Installation together with oiled air filter and dry dust guard 590.06.019.000. dölj mer info

SXS10450512

Lagerstatus: hos lev.
Pris: 6375kr
PowerParts|Archive
Akrapovi? "Slip-on Line"
dölj mer info

78105981100

Lagerstatus: hos lev.
Pris: 6955kr
PowerParts|Archive
Akrapovi? "Slip-on Line"
This Akrapovi? silencer has been specially conceived for enduro riders who are looking for the best exhaust system available on the aftermarket and who know how optimum power development can best be achieved on the enduro track or in offroad use. The hexagonal silencer is a perfect match for the sharp lines of the KTM. With removable noise reduction insert. Installation only possible with original header. Can also be fitted in combination with factory headers on 350/400/450/500/530 EXC. Combined with the original header, this silencer is homologated for road use on EXC 4-strokes MY 2012-15.
This Akrapovi? silencer has been specially conceived for enduro riders who are looking for the best exhaust system available on the aftermarket and who know how optimum power development can best be achieved on the enduro track or in offroad use. The hexagonal silencer is a perfect match for the sharp lines of the KTM. With removable noise reduction insert. Installation only possible with original header. Can also be fitted in combination with factory headers on 350/400/450/500/530 EXC. Combined with the original header, this silencer is homologated for road use on EXC 4-strokes MY 2012-15. dölj mer info

78105981100

Lagerstatus: hos lev.
Pris: 6955kr
PowerParts|Archive
Akrapovi? "Slip-on Line"
This Akrapovi? silencer has been conceived especially for enduro riders who are looking for the best exhaust system available on the aftermarket and who know how optimum power development can best be achieved on the enduro course or in offroad use. The hexagonal silencer is a perfect match for the sharp lines of the KTM. With removable noise reduction insert. Installation only possible with original header. Can also be fitted in combination with factory headers on 400/450/500/530 EXC. Combined with the original header, this silencer is licensed for road use on 2012 EXC 4-stroke models.
This Akrapovi? silencer has been conceived especially for enduro riders who are looking for the best exhaust system available on the aftermarket and who know how optimum power development can best be achieved on the enduro course or in offroad use. The hexagonal silencer is a perfect match for the sharp lines of the KTM. With removable noise reduction insert. Installation only possible with original header. Can also be fitted in combination with factory headers on 400/450/500/530 EXC. Combined with the original header, this silencer is licensed for road use on 2012 EXC 4-stroke models. dölj mer info

77713975120

Lagerstatus: hos lev.
Pris: 1150kr
PowerParts|Archive
Brake caliper protection
Optimum protection against stone impact. Can be fitted on CNC brake caliper supports 777.13.975.010.30 and 781.13.975.044.
<div class="gs01l">Optimum protection against stone impact. Can be fitted on CNC brake caliper supports 777.13.975.010.30 and 781.13.975.044.</div> dölj mer info

78913914100

Lagerstatus: 1
Pris: 915kr
PowerParts|Archive
Brake caliper support
Required for using the 270 mm brake disc 78909960000 and 2-piston Brembo brake caliper.
Required for using the 270 mm brake disc 78909960000 and 2-piston Brembo brake caliper. dölj mer info

78113975144

Lagerstatus: 1
Pris: 1845kr
PowerParts|Archive
Brake caliper support with brake disc guard
The integrated brake disc guard protects the rear brake disc from stones and other solid objects in the event of a crash or in the heat of battle. The brake caliper support is lighter and stiffer than the standard version. The stiffness has a positive effect on such braking properties as braking power and application. CNC-machined from highest grade aluminum and orange anodized.
Options available: Carbon brake caliper protection 777.13.975.120.
The integrated brake disc guard protects the rear brake disc from stones and other solid objects in the event of a crash or in the heat of battle. The brake caliper support is lighter and stiffer than the standard version. The stiffness has a positive effect on such braking properties as braking power and application. CNC-machined from highest grade aluminum and orange anodized.<br />Options available: Carbon brake caliper protection 777.13.975.120. dölj mer info

78113975144

Lagerstatus: 1
Pris: 1845kr
PowerParts|Archive
Brake caliper support with brake disc guard
The integrated brake disc guard protects the rear brake disc during a camber or in the heat of battle from rocks or other fixed obstacles. The brake caliper support is lighter and stiffer than the installed standard unit. The stiffness has a positive effect on braking characteristics such as braking power and modulation. CNC machined from the highest quality aluminum and anodized in black and orange. Optionally available: Carbon composite brake caliper guard 777.13.975.120
The integrated brake disc guard protects the rear brake disc during a camber or in the heat of battle from rocks or other fixed obstacles. The brake caliper support is lighter and stiffer than the installed standard unit. The stiffness has a positive effect on braking characteristics such as braking power and modulation. CNC machined from the highest quality aluminum and anodized in black and orange. Optionally available: Carbon composite brake caliper guard 777.13.975.120 dölj mer info

5481096120030

Lagerstatus: 2
Pris: 915kr
PowerParts|Archive
Brake disc guard
Protects the rear brake disc from stones or other solid objects in the event of a crash or when riding hard. Manufactured from high-strength aluminum.
Protects the rear brake disc from stones or other solid objects in the event of a crash or when riding hard. Manufactured from high-strength aluminum. dölj mer info

54813990100

Lagerstatus: 2
Pris: 310kr
PowerParts|Archive
Brake pad
ORGANIC BRAKE PADS
  • Made from a special material mix with a high proportion of organic substances, therefore softer
  • With ceramic underlayer for optimum thermal insulation
  • Lower friction coefficient than sintered brake pads, so less aggressive braking feel
  • Beneficial when particularly refined responsiveness is desired for ideal brake application
ORGANIC BRAKE PADS<ul><li class="li-disc">Made from a special material mix with a high proportion of organic substances, therefore softer</li><li class="li-disc">With ceramic underlayer for optimum thermal insulation</li><li class="li-disc">Lower friction coefficient than sintered brake pads, so less aggressive braking feel</li><li class="li-disc">Beneficial when particularly refined responsiveness is desired for ideal brake application</li></ul> dölj mer info

54813990200

Lagerstatus: 3
Pris: 450kr
PowerParts|Archive
Brake pad
DO YOU KNOW about the various properties and operational uses of different brake pads?
SINTERED BRAKE PADS
  • 100% sintered metals
  • Very high coefficient of friction for maximum and enduring braking power
  • Low "fading" tendency when hot
  • Very effective braking in the wet as well
  • Very hard and therefore extremely long-lasting
  • Particularly beneficial in extreme conditions (e.g. sand, gravel, etc.)
ORGANIC BRAKE PADS
  • Made from a special material mix with a high proportion of organic substances, therefore softer
  • With ceramic underlayer for optimum thermal insulation
  • Lower friction coefficient than sintered brake pads, so less aggressive braking feel
  • Beneficial when particularly refined responsiveness is desired for ideal brake application
DO YOU KNOW about the various properties and operational uses of different brake pads? <br />SINTERED BRAKE PADS<ul><li class="li-disc"> 100% sintered metals</li><li class="li-disc"> Very high coefficient of friction for maximum and enduring braking power</li><li class="li-disc"> Low "fading" tendency when hot</li><li class="li-disc"> Very effective braking in the wet as well </li><li class="li-disc"> Very hard and therefore extremely long-lasting</li><li class="li-disc"> Particularly beneficial in extreme conditions (e.g. sand, gravel, etc.) </li></ul>ORGANIC BRAKE PADS<ul><li class="li-disc"> Made from a special material mix with a high proportion of organic substances, therefore softer</li><li class="li-disc"> With ceramic underlayer for optimum thermal insulation </li><li class="li-disc"> Lower friction coefficient than sintered brake pads, so less aggressive braking feel </li><li class="li-disc"> Beneficial when particularly refined responsiveness is desired for ideal brake application</li></ul> dölj mer info

59013930100

Lagerstatus: 6
Pris: 310kr
PowerParts|Archive
Brake pad

ORGANIC BRAKE PADS

  • Made from a special material mix with a high proportion of organic substances, therefore softer
  • With ceramic underlayer for optimum thermal insulation
  • Lower friction coefficient than sintered brake pads, so less aggressive braking feel
  • Beneficial when particularly refined responsiveness is desired for ideal brake application
<p>ORGANIC BRAKE PADS</p><ul><li>Made from a special material mix with a high proportion of organic substances, therefore softer</li><li>With ceramic underlayer for optimum thermal insulation</li><li>Lower friction coefficient than sintered brake pads, so less aggressive braking feel</li><li>Beneficial when particularly refined responsiveness is desired for ideal brake application</li></ul> dölj mer info

59013930200

Lagerstatus: 5
Pris: 450kr
PowerParts|Archive
Brake pad
SINTERED BRAKE PADS
  • 100% sintered metals
  • Very high coefficient of friction for maximum and enduring braking power
  • Low "fading" tendency when hot
  • Very effective braking in the wet as well
  • Very hard and therefore extremely long-lasting
  • Particularly beneficial in extreme conditions (e.g. sand, gravel, etc.)
SINTERED BRAKE PADS<ul><li class="li-disc">100% sintered metals</li><li class="li-disc">Very high coefficient of friction for maximum and enduring braking power</li><li class="li-disc">Low "fading" tendency when hot</li><li class="li-disc">Very effective braking in the wet as well</li><li class="li-disc">Very hard and therefore extremely long-lasting</li><li class="li-disc">Particularly beneficial in extreme conditions (e.g. sand, gravel, etc.)</li></ul> dölj mer info

59013930100

Lagerstatus: 6
Pris: 310kr
PowerParts|Archive
Brake pad

ORGANIC BRAKE PADS

  • Made from a special material mix with a high proportion of organic substances, therefore softer
  • With ceramic underlayer for optimum thermal insulation
  • Lower friction coefficient than sintered brake pads, so less aggressive braking feel
  • Beneficial when particularly refined responsiveness is desired for ideal brake application
<p>ORGANIC BRAKE PADS</p><ul><li>Made from a special material mix with a high proportion of organic substances, therefore softer</li><li>With ceramic underlayer for optimum thermal insulation</li><li>Lower friction coefficient than sintered brake pads, so less aggressive braking feel</li><li>Beneficial when particularly refined responsiveness is desired for ideal brake application</li></ul> dölj mer info

79010965118EB

Lagerstatus: 3
Pris: 1150kr
PowerParts|Archive
Chain
Sometimes less can mean more! O and Z-rings have been dispensed with completely on this chain specially developed for motocross use. That and the special construction of the bearing bushes result in the perfect compromise between durability and minimum power loss.
Sometimes less can mean more! O and Z-rings have been dispensed with completely on this chain specially developed for motocross use. That and the special construction of the bearing bushes result in the perfect compromise between durability and minimum power loss. dölj mer info

78104974100

Lagerstatus: 1
Pris: 915kr
PowerParts|Archive
Chain guide bracket protection
Manufactured from high-strength aluminum. Protects the chain guide bracket from major damage. Cannot be used in combination with the T.M. Designworks chain guide
Manufactured from high-strength aluminum. Protects the chain guide bracket from major damage. Cannot be used in combination with the T.M. Designworks chain guide dölj mer info

7810407010004

Lagerstatus: 5
Pris: 375kr
PowerParts|Archive
Chainguide
In orange factory look.
<div class="gs01l">In orange factory look.</div> dölj mer info

78109945000

Lagerstatus: 1
Pris: 450kr
PowerParts|Archive
Crash bung
Protects the fork from damage in the event of a crash. Suitable for all models with 26 mm front axle.
Protects the fork from damage in the event of a crash. Suitable for all models with 26 mm front axle. dölj mer info

78110945100

Lagerstatus: 1
Pris: 450kr
PowerParts|Archive
Crash bung
Protects the swingarm in the event of a crash.
Protects the swingarm in the event of a crash. dölj mer info

78110945100

Lagerstatus: 1
Pris: 450kr
PowerParts|Archive
Crash bung
Protects the swingarm in the event of a crash.
Protects the swingarm in the event of a crash. dölj mer info

78107908144

Lagerstatus: hos lev.
Pris: 800kr
PowerParts|Archive
Factory fuel cap
DO YOU KNOW that all KTM CNC parts are manufactured from highest quality aluminum and therefore not only look good, they also withstand the toughest treatment? With the anodized aluminum components in the original factory look from the PowerParts range, you can turn your KTM into something very special.
DO YOU KNOW that all KTM CNC parts are manufactured from highest quality aluminum and therefore not only look good, they also withstand the toughest treatment? With the anodized aluminum components in the original factory look from the PowerParts range, you can turn your KTM into something very special. dölj mer info

78107908144

Lagerstatus: hos lev.
Pris: 800kr
PowerParts|Archive
Factory fuel cap
Aluminium, CNC-machined, including gasket
Aluminium, CNC-machined, including gasket dölj mer info

77338941044

Lagerstatus: 3
Pris: 450kr
PowerParts|Archive
Factory oil filter cover
DO YOU KNOW that all KTM CNC parts are manufactured from highest quality aluminum and therefore not only look good, they also withstand the toughest treatment? With the anodized aluminum components in the original factory look from the PowerParts range, you can turn your KTM into something very special.
DO YOU KNOW that all KTM CNC parts are manufactured from highest quality aluminum and therefore not only look good, they also withstand the toughest treatment? With the anodized aluminum components in the original factory look from the PowerParts range, you can turn your KTM into something very special. dölj mer info

77338941044

Lagerstatus: 3
Pris: 450kr
PowerParts|Archive
Factory oil filter cover
CNC aluminum version, orange anodized
CNC aluminum version, orange anodized dölj mer info

7801380220004

Lagerstatus: 2
Pris: 1030kr
PowerParts|Archive
Flex brake lever
dölj mer info

7870293104404

Lagerstatus: 2
Pris: 1150kr
PowerParts|Archive
Flex clutch lever
Ever had to give up during the race because of a broken clutch or brake lever? That will never happen again - these levers are designed to fold away on contact with the ground.
Suitable for all hydraulic Brembo® clutch fittings.
Ever had to give up during the race because of a broken clutch or brake lever? That will never happen again - these levers are designed to fold away on contact with the ground.<br />Suitable for all hydraulic Brembo® clutch fittings. dölj mer info

SXS13450512

Lagerstatus: hos lev.
Pris: 5565kr
PowerParts|Archive
FMF Powercore 4 silencer
A perfect introduction to the world of performance enhancement! The FMF slip-on silencer has been developed in collaboration with FMF and adapted precisely to the engine characteristics of your KTM - the only way to ensure maximum power with ultimate rideability.
The benefits:
  • Increased performance along with minimized noise level
  • Manufactured from highest grade materials
    With removable noise reduction insert.
Can only be fitted in combination with original header.
A perfect introduction to the world of performance enhancement! The FMF slip-on silencer has been developed in collaboration with FMF and adapted precisely to the engine characteristics of your KTM - the only way to ensure maximum power with ultimate rideability.<br />The benefits:<ul><li class="li-disc"> Increased performance along with minimized noise level</li><li class="li-disc"> Manufactured from highest grade materials<br />With removable noise reduction insert.</li></ul>Can only be fitted in combination with original header. dölj mer info

SXS13450512

Lagerstatus: hos lev.
Pris: 5565kr
PowerParts|Archive
FMF Powercore 4 silencer
A perfect introduction to the world of performance enhancement! The FMF slip-on silencer has been developed in collaboration with FMF and adapted precisely to the engine characteristics of your KTM - the only way to ensure maximum power with ultimate rideability.

The benefits:

  • Increased performance along with minimized noise level
  • Manufactured from highest grade materials

With removable noise reduction insert.
Can only be fitted in combination with original header.

A perfect introduction to the world of performance enhancement! The FMF slip-on silencer has been developed in collaboration with FMF and adapted precisely to the engine characteristics of your KTM - the only way to ensure maximum power with ultimate rideability.<p>The benefits:</p><ul><li class="li-disc">Increased performance along with minimized noise level</li><li class="li-disc">Manufactured from highest grade materials</li></ul><p>With removable noise reduction insert.<br />Can only be fitted in combination with original header.</p> dölj mer info

59003990250

Lagerstatus: 2
Pris: 100kr
PowerParts|Archive
Foam rubber
When positioned between engine and skid plate, less dirt can accumulate, hence allowing better cooling of the engine.
When positioned between engine and skid plate, less dirt can accumulate, hence allowing better cooling of the engine. dölj mer info

54835980000

Lagerstatus: 20
Pris: 92kr
PowerParts|Archive
Foam rubber
For extremely muddy conditions. Prevents the radiator from becoming clogged with mud and the engine from overheating.
For extremely muddy conditions. Prevents the radiator from becoming clogged with mud and the engine from overheating. dölj mer info

54813960050

Lagerstatus: 7
Pris: 290kr
PowerParts|Archive
Footbrake cylinder cover
This rear brake reservoir cap has a larger volume and additional cooling fins. This minimizes heating of the brake fluid and almost completely eliminates that dreaded "fading".
This rear brake reservoir cap has a larger volume and additional cooling fins. This minimizes heating of the brake fluid and almost completely eliminates that dreaded "fading". dölj mer info

54813960050

Lagerstatus: 7
Pris: 290kr
PowerParts|Archive
Footbrake cylinder extender
  • Increases the volume of the foot brake cylinder
  • The additional cooling ribs minimize the heat-up of the brake fluid
  • Eliminates dreaded “fading” almost completely
  • Space requirements: Total height including cover approximately 40.5 mm
<ul><li class="li-square">Increases the volume of the foot brake cylinder</li><li class="li-square">The additional cooling ribs minimize the heat-up of the brake fluid</li><li class="li-square">Eliminates dreaded “fading” almost completely</li><li class="li-square">Space requirements: Total height including cover approximately 40.5 mm</li></ul> dölj mer info

54813951100

Lagerstatus: 1
Pris: 565kr
PowerParts|Archive
Footbrake lever step plate
DO YOU KNOW that all KTM CNC parts are manufactured from highest quality aluminum and therefore not only look good, they also withstand the toughest treatment? With the anodized aluminum components in the original factory look from the PowerParts range, you can turn your KTM into something very special.
DO YOU KNOW that all KTM CNC parts are manufactured from highest quality aluminum and therefore not only look good, they also withstand the toughest treatment? With the anodized aluminum components in the original factory look from the PowerParts range, you can turn your KTM into something very special. dölj mer info

8130199400049

Lagerstatus: hos lev.
Pris: 1380kr
PowerParts|Archive
Fork protector kit
DO YOU KNOW about the special properties of carbon?
  • Extremely light: about 80% lighter than steel with the same load-bearing capacity
  • Very stable: 4 times more resilient than aluminum
  • Ultimate stiffness and strength
  • Free from corrosion
  • High continuous temperature resistance
  • Low thermal expansion
  • And, last but not least, a cool look
    Pimp your KTM with carbon components from KTM PowerParts - they save weight and look great.
Optimum protection against stone impact. Made to fit all 48 mm forks.
DO YOU KNOW about the special properties of carbon?<ul><li class="li-disc"> Extremely light: about 80% lighter than steel with the same load-bearing capacity</li><li class="li-disc"> Very stable: 4 times more resilient than aluminum</li><li class="li-disc"> Ultimate stiffness and strength</li><li class="li-disc"> Free from corrosion</li><li class="li-disc"> High continuous temperature resistance</li><li class="li-disc"> Low thermal expansion</li><li class="li-disc"> And, last but not least, a cool look<br />Pimp your KTM with carbon components from KTM PowerParts - they save weight and look great.</li></ul>Optimum protection against stone impact. Made to fit all 48 mm forks. dölj mer info

7800109420028

Lagerstatus: 3
Pris: 360kr
PowerParts|Archive
Fork protector kit
dölj mer info

8130199400049

Lagerstatus: hos lev.
Pris: 1380kr
PowerParts|Archive
Fork protector kit
  • Manufactured from carbon
  • Optimum protection against stone impacts
  • For fork tube with a diameter of 48 mm
<ul><li class="li-square">Manufactured from carbon</li><li class="li-square">Optimum protection against stone impacts</li><li class="li-square">For fork tube with a diameter of 48 mm</li></ul> dölj mer info

77301994050

Lagerstatus: 1
Pris: 240kr
PowerParts|Archive
Fork protector sticker set
For use on the closed fork protector.
For use on the closed fork protector. dölj mer info

54829094100

Lagerstatus: 4
Pris: 195kr
PowerParts|Archive
Fork support
dölj mer info

2610900104430

Lagerstatus: hos lev.
Pris: 6460kr
PowerParts|Archive
Front wheel 3.5x16.5
Black anodized.
Black anodized. dölj mer info

78107990100

Lagerstatus: 9
Pris: 335kr
PowerParts|Archive
Fuel filter
Easy &amp; safe: Filter fitted directly at the tank opening. This means that no dirt enters the fuel tank or the injection system during refueling. Fits on all 3/4 in filler caps.
Easy &amp;amp; safe: Filter fitted directly at the tank opening. This means that no dirt enters the fuel tank or the injection system during refueling. Fits on all 3/4 in filler caps. dölj mer info

77734931144

Lagerstatus: 1
Pris: 565kr
PowerParts|Archive
Gear shift lever step plate
5 mm wider contact surface than standard.
5 mm wider contact surface than standard. dölj mer info

76012992244

Lagerstatus: 1
Pris: 1495kr
PowerParts|Archive
GPS bracket
Simple fitting on every original KTM handlebar clamp by means of a cushioned support. Provides the opportunity of attaching an electric socket and securing the navigation system, together with its bracket, against theft. If you want to lock your sat-nav securely, you'll also need one of the PowerParts GPS brackets.
Simple fitting on every original KTM handlebar clamp by means of a cushioned support. Provides the opportunity of attaching an electric socket and securing the navigation system, together with its bracket, against theft. If you want to lock your sat-nav securely, you'll also need one of the PowerParts GPS brackets. dölj mer info

76012992244

Lagerstatus: 1
Pris: 1495kr
PowerParts|Archive
GPS bracket
Simple fitting on every original KTM handlebar clamp by means of a cushioned support. Provides the opportunity of attaching an electric socket.
Simple fitting on every original KTM handlebar clamp by means of a cushioned support. Provides the opportunity of attaching an electric socket. dölj mer info

62002903100

Lagerstatus: hos lev.
Pris: 635kr
PowerParts|Archive
GPS support
Only for use on original handlebar mounting.
Only for use on original handlebar mounting. dölj mer info

62002903100

Lagerstatus: hos lev.
Pris: 635kr
PowerParts|Archive
GPS support
Only for use on original handlebar mounting.
Only for use on original handlebar mounting. dölj mer info

78112964000

Lagerstatus: 11
Pris: 565kr
PowerParts|Archive
Grip heater
Ensures warm hands, even in bad weather. Can only be fitted by an authorized KTM dealer.
Ensures warm hands, even in bad weather. Can only be fitted by an authorized KTM dealer. dölj mer info

6030217910028

Lagerstatus: 2
Pris: 685kr
PowerParts|Archive
Handguard kit
The closed, two-component plastic handguards developed by KTM feature a black center section that offers maximum strength for optimum protection. The colorful upper and lower parts are highly flexible and endure even the roughest of treatment without complaint. Available in two different heights.
The closed, two-component plastic handguards developed by KTM feature a black center section that offers maximum strength for optimum protection. The colorful upper and lower parts are highly flexible and endure even the roughest of treatment without complaint. Available in two different heights. dölj mer info

6030217910030

Lagerstatus: 2
Pris: 685kr
PowerParts|Archive
Handguard kit
The closed, two-component plastic handguards developed by KTM feature a black center section that offers maximum strength for optimum protection. The colorful upper and lower parts are highly flexible and endure even the roughest of treatment without complaint. Available in two different heights.
The closed, two-component plastic handguards developed by KTM feature a black center section that offers maximum strength for optimum protection. The colorful upper and lower parts are highly flexible and endure even the roughest of treatment without complaint. Available in two different heights. dölj mer info

7800207920028

Lagerstatus: 2
Pris: 635kr
PowerParts|Archive
Handguard kit
The closed, two-component plastic handguards developed by KTM feature a black center section that offers maximum strength for optimum protection. The colorful upper and lower parts are highly flexible and endure even the roughest of treatment without complaint. Available in two different heights.
<div class="gs01l">The closed, two-component plastic handguards developed by KTM feature a black center section that offers maximum strength for optimum protection. The colorful upper and lower parts are highly flexible and endure even the roughest of treatment without complaint. Available in two different heights.</div> dölj mer info

7800207920030

Lagerstatus: 5
Pris: 635kr
PowerParts|Archive
Handguard kit

The closed, two-component plastic handguards developed by KTM feature a black center section that offers maximum strength for optimum protection. The colorful upper and lower parts are highly flexible and endure even the roughest of treatment without complaint. Available in two different heights.

<p>The closed, two-component plastic handguards developed by KTM feature a black center section that offers maximum strength for optimum protection. The colorful upper and lower parts are highly flexible and endure even the roughest of treatment without complaint. Available in two different heights.</p> dölj mer info

6030217900004

Lagerstatus: 2
Pris: 685kr
PowerParts|Archive
Handguard kit
These handguards are an indispensable companion for serious offroad and supermoto use. The wide, spacious design ensures excellent freedom of movement and maximum protection against impact, flying stones, branches, etc. Supplied complete with the components required for fitting to 22 and 28 mm diameter handlebars.
These handguards are an indispensable companion for serious offroad and supermoto use. The wide, spacious design ensures excellent freedom of movement and maximum protection against impact, flying stones, branches, etc. Supplied complete with the components required for fitting to 22 and 28 mm diameter handlebars. dölj mer info

6030217910030

Lagerstatus: 2
Pris: 685kr
PowerParts|Archive
Handguard kit
These handguards are an indispensable companion for serious offroad and supermoto use. The wide, spacious design ensures excellent freedom of movement and maximum protection against impact, flying stones, branches, etc. Supplied complete with the components required for fitting to 22 and 28 mm diameter handlebars.
These handguards are an indispensable companion for serious offroad and supermoto use. The wide, spacious design ensures excellent freedom of movement and maximum protection against impact, flying stones, branches, etc. Supplied complete with the components required for fitting to 22 and 28 mm diameter handlebars. dölj mer info

77202002144

Lagerstatus: 11
Pris: 255kr
PowerParts|Archive
Handlebar pad
Already a must at many events
Already a must at many events dölj mer info

77512950200

Lagerstatus: 2
Pris: 450kr
PowerParts|Archive
Lashing strap set
2x high quality tie-downs with rubberized fastening hooks and handlebar loops. In the KTM colors orange/black and featuring the KTM logo.
2x high quality tie-downs with rubberized fastening hooks and handlebar loops. In the KTM colors orange/black and featuring the KTM logo. dölj mer info

77512950200

Lagerstatus: 2
Pris: 450kr
PowerParts|Archive
Lashing strap set
With KTM tie downs, any bike can be easily secured without scratching the handlebar. The extra wide straps (38 mm) are equipped with a rubberized hook and loop at one end and a carabiner at the other. In the KTM colors orange/black, complete with KTM logo.
With KTM tie downs, any bike can be easily secured without scratching the handlebar. The extra wide straps (38 mm) are equipped with a rubberized hook and loop at one end and a carabiner at the other. In the KTM colors orange/black, complete with KTM logo. dölj mer info

77512950300

Lagerstatus: 2
Pris: 195kr
PowerParts|Archive
Lashing strap set
  • Enables secure attachment to the machine without scratching your handlebars or tank
  • Made from durable ballistic nylon
  • Load capacity of 280 kg
  • Dimensions: 3,8 cm x 0,6 m
  • 2 units
<ul><li>Enables secure attachment to the machine without scratching your handlebars or tank</li><li>Made from durable ballistic nylon</li><li>Load capacity of 280 kg</li><li>Dimensions: 3,8 cm x 0,6 m </li><li>2 units</li></ul> dölj mer info

77512950200

Lagerstatus: 2
Pris: 450kr
PowerParts|Archive
Lashing strap set
  • Enables secure attachment to the machine without scratching your handlebars or tank
  • Made from durable ballistic nylon
  • Load capacity of 280 kg
  • With handlebar loops
  • With rubberized hooks on both belt ends
  • 2 units
<ul><li>Enables secure attachment to the machine without scratching your handlebars or tank</li><li>Made from durable ballistic nylon</li><li>Load capacity of 280 kg</li><li>With handlebar loops</li><li>With rubberized hooks on both belt ends</li><li>2 units</li></ul> dölj mer info

78129955100

Lagerstatus: 3
Pris: 755kr
PowerParts|Archive
Lift stand
SX/EXC: 315 mm/425 mm
Maximum load: 150 kg
SX/EXC: 315 mm/425 mm<br />Maximum load: 150 kg dölj mer info

79111053000

Lagerstatus: hos lev.
Pris: 1020kr
PowerParts|Archive
Lithium ion battery

The following benefits are the mark of our lithium-ion batteries:

  • 1 kg lighter than the standard battery 77311053000
  • 1.6 kg lighter than the standard battery 58511053000
  • Unbeatable cost/weight saving ratio
  • Mountable in any position, as it does not contains acid
  • Safe technology and long life

Technical data:

  • 12 V maintenance-free LiFePo4-battery
  • Capacity 1.2 Ah
  • Recommended charging current - 2.5 amps
  • Maximum charge current for fast charging - 12 amps
  • Fast charge with high charging current (up to 90% in 6 min)
  • Very low self-discharge (max. 5% per month)
  • Balanced discharge/charge of all cells through balancer
  • Contains no heavy metals

When mounting on 125 SX and SX-F models from 2016 onwards, the battery compartment 790.11.955.044 is also required.

<p>The following benefits are the mark of our lithium-ion batteries:</p><ul><li class="li-disc">1 kg lighter than the standard battery 77311053000</li><li class="li-disc">1.6 kg lighter than the standard battery 58511053000</li><li class="li-disc">Unbeatable cost/weight saving ratio</li><li class="li-disc">Mountable in any position, as it does not contains acid</li><li class="li-disc">Safe technology and long life</li></ul><p>Technical data:</p><ul><li class="li-disc">12 V maintenance-free LiFePo4-battery</li><li class="li-disc">Capacity 1.2 Ah</li><li class="li-disc">Recommended charging current - 2.5 amps</li><li class="li-disc">Maximum charge current for fast charging - 12 amps</li><li class="li-disc">Fast charge with high charging current (up to 90% in 6 min)</li><li class="li-disc">Very low self-discharge (max. 5% per month)</li><li class="li-disc">Balanced discharge/charge of all cells through balancer</li><li class="li-disc">Contains no heavy metals</li></ul><p>When mounting on 125 SX and SX-F models from 2016 onwards, the battery compartment 790.11.955.044 is also required.</p> dölj mer info

79111053000

Lagerstatus: hos lev.
Pris: 1020kr
PowerParts|Archive
Lithium ion battery
1 kg lighter than battery 585.11.053.000 (4 Ah) and 0.7 kg lighter than battery 773.11.053.000 (3 kg).
1 kg lighter than battery 585.11.053.000 (4 Ah) and 0.7 kg lighter than battery 773.11.053.000 (3 kg). dölj mer info

78112978100

Lagerstatus: 2
Pris: 915kr
PowerParts|Archive
Luggage bag
The robust, waterproof bag can be fitted simply and without additional installation materials. The volume of the bag is approx. 5 l. For use on Freeride models, rear rack 720.12.927.044 is required.
<div class="gs01l">The robust, waterproof bag can be fitted simply and without additional installation materials. The volume of the bag is approx. 5 l. For use on Freeride models, rear rack 720.12.927.044 is required.</div> dölj mer info

79430920044

Lagerstatus: 20
Pris: 230kr
PowerParts|Archive
Oil plug

DO YOU KNOW that all KTM CNC parts are manufactured from highest quality aluminum and therefore not only look good, they also withstand the toughest treatment? With the anodized aluminum components in the original factory look from the PowerParts range, you can turn your KTM into something very special.

<p>DO YOU KNOW that all KTM CNC parts are manufactured from highest quality aluminum and therefore not only look good, they also withstand the toughest treatment? With the anodized aluminum components in the original factory look from the PowerParts range, you can turn your KTM into something very special.</p> dölj mer info

78003940244

Lagerstatus: hos lev.
Pris: 2310kr
PowerParts|Archive
Pivot Pegz
Ingenious: Foot pegs that move with you when you shift your weight. Developed and tested by KTM professional riders. Ideal for Motocross, Enduro and Supermoto.
The benefits:
  • Spring-mounted, 20° rotational movement possible towards front and rear
  • More control and grip in the corners thanks to the maneuverability
  • Large tread surface area of 60 mm
  • Simpler and quicker weight shifting
  • Simpler gear changing and braking
  • Permanent contact between boot and foot pegs: extends the service life of your boots!
Ingenious: Foot pegs that move with you when you shift your weight. Developed and tested by KTM professional riders. Ideal for Motocross, Enduro and Supermoto.<br />The benefits:<ul><li class="li-disc"> Spring-mounted, 20° rotational movement possible towards front and rear</li><li class="li-disc"> More control and grip in the corners thanks to the maneuverability</li><li class="li-disc"> Large tread surface area of 60 mm</li><li class="li-disc"> Simpler and quicker weight shifting</li><li class="li-disc"> Simpler gear changing and braking</li><li class="li-disc"> Permanent contact between boot and foot pegs: extends the service life of your boots!</li></ul> dölj mer info

7811297300099

Lagerstatus: 1
Pris: 915kr
PowerParts|Archive
Plastic drum
20 liters, KTM orange plastic canister for use on the racetrack. Includes a flexible hose and screw cap. For legal reasons, not to be used in some countries for storage and transportation of gasoline.
20 liters, KTM orange plastic canister for use on the racetrack. Includes a flexible hose and screw cap. For legal reasons, not to be used in some countries for storage and transportation of gasoline. dölj mer info

7811297300099

Lagerstatus: 1
Pris: 915kr
PowerParts|Archive
Plastic drum
18 l, KTM orange plastic drum for use on the racetrack. Complete with flexible hose and screw cap. Must not be used for storing or transporting fuel in some countries for legal reasons.
18 l, KTM orange plastic drum for use on the racetrack. Complete with flexible hose and screw cap. Must not be used for storing or transporting fuel in some countries for legal reasons. dölj mer info

7901203010004

Lagerstatus: 14
Pris: 81kr
PowerParts|Archive
Plug
Keeps water out of the silencer during cleaning. For internal diameters 15 mm - 38 mm.
Keeps water out of the silencer during cleaning. For internal diameters 15 mm - 38 mm. dölj mer info

59512030200

Lagerstatus: 5
Pris: 81kr
PowerParts|Archive
Plug
Keeps water out of the silencer during cleaning. For internal diameters 40 mm – 62 mm.
Keeps water out of the silencer during cleaning. For internal diameters 40 mm – 62 mm. dölj mer info

77703020000

Lagerstatus: 1
Pris: 320kr
PowerParts|Archive
Plug-in stand
dölj mer info

52000092

Lagerstatus: 6
Pris: 310kr
PowerParts|Archive
Protective fork sticker set
Extra thick film; protects the outer tubes against stone impact.
Black. For all 48 mm forks.
Extra thick film; protects the outer tubes against stone impact.<br />Black. For all 48 mm forks. dölj mer info

52000093

Lagerstatus: 3
Pris: 310kr
PowerParts|Archive
Protective fork sticker set
Extra thick film; protects the outer tubes against stone impact.
Transparent. For all 48 mm forks.
Extra thick film; protects the outer tubes against stone impact.<br />Transparent. For all 48 mm forks. dölj mer info

52000140

Lagerstatus: hos lev.
Pris: 270kr
PowerParts|Archive
Protective fork sticker set
Extra thick film; protects the outer tubes against stone impact.
For all 43 mm forks.
Extra thick film; protects the outer tubes against stone impact.<br />For all 43 mm forks. dölj mer info

78135941244

Lagerstatus: 1
Pris: 2660kr
PowerParts|Archive
Radiator fan

Indispensable in extreme conditions, this fan provides more air, ensuring better cooling and maximum power. It’s in your own hands: With the digital control unit, you can adjust the activation temperature to suit prevailing conditions and read the current temperature at any time. The freely selectable activation temperature lies between 65°C and 95°C. The deactivation temperature is adjusted automatically and always lies 1°C below the selected activation temperature. For the installation on EXC 4-stroke models till MY11 and on all EXC 2-stroke models the auxiliary wiring harness 777.11.979.000 is needed. From MY14 the Y-distributor wiring 777.11.979.010 is required for the installation on EXC 4-stroke models. Auxiliary wiring harness 777.11.979.000 for installation on  XC models.

<p>Indispensable in extreme conditions, this fan provides more air, ensuring better cooling and maximum power. It’s in your own hands: With the digital control unit, you can adjust the activation temperature to suit prevailing conditions and read the current temperature at any time. The freely selectable activation temperature lies between 65°C and 95°C. The deactivation temperature is adjusted automatically and always lies 1°C below the selected activation temperature. For the installation on EXC 4-stroke models till MY11 and on all EXC 2-stroke models the auxiliary wiring harness 777.11.979.000 is needed. From MY14 the Y-distributor wiring 777.11.979.010 is required for the installation on EXC 4-stroke models. Auxiliary wiring harness 777.11.979.000 for installation on  XC models.</p> dölj mer info

81235941144

Lagerstatus: 2
Pris: 1615kr
PowerParts|Archive
Radiator fan
Specifically suited to extreme conditions: for more air, better cooling and maximum power. Indispensable not only at the Erzberg or the Extreme Lumezzane.
Specifically suited to extreme conditions: for more air, better cooling and maximum power. Indispensable not only at the Erzberg or the Extreme Lumezzane. dölj mer info

78135936100

Lagerstatus: 1
Pris: 1150kr
PowerParts|Archive
Radiator protection
Perfect crash bar for radiators. Simple fitting. Installation not possible with larger tanks that take the place of the radiator spoiler.
Perfect crash bar for radiators. Simple fitting. Installation not possible with larger tanks that take the place of the radiator spoiler. dölj mer info

78135936100

Lagerstatus: 1
Pris: 1150kr
PowerParts|Archive
Radiator protection
Perfect crash bar for radiators. Simple fitting. Installation not possible with larger tanks that take the place of the radiator spoiler.
Perfect crash bar for radiators. Simple fitting. Installation not possible with larger tanks that take the place of the radiator spoiler. dölj mer info

78135936100

Lagerstatus: 1
Pris: 1150kr
PowerParts|Archive
Radiator protection
dölj mer info

78113900000

Lagerstatus: 3
Pris: 1150kr
PowerParts|Archive
Rear brake conversion kit
For use with the automatic clutch. Allows braking of the rear wheel with the left hand, hence providing additional control in critical situations (e.g. steep downhills).
For use with the automatic clutch. Allows braking of the rear wheel with the left hand, hence providing additional control in critical situations (e.g. steep downhills). dölj mer info

78113900000

Lagerstatus: 3
Pris: 1150kr
PowerParts|Archive
Rear brake conversion kit
For use with the automatic clutch. Allows braking of the rear wheel with the left hand, hence providing additional control in critical situations (e.g. steep downhills).
For use with the automatic clutch. Allows braking of the rear wheel with the left hand, hence providing additional control in critical situations (e.g. steep downhills). dölj mer info

78113900000

Lagerstatus: 3
Pris: 1150kr
PowerParts|Archive
Rear brake conversion kit
For use with the automatic clutch. Allows braking of the rear wheel with the left hand, hence providing additional control in critical situations (e.g. steep downhills).
For use with the automatic clutch. Allows braking of the rear wheel with the left hand, hence providing additional control in critical situations (e.g. steep downhills). dölj mer info

58210951050

Lagerstatus: 1
Pris: 335kr
PowerParts|Archive
Rear sprocket
For longer trips, we recommend this extremely low-wear, QStE 460 steel sprocket.
For longer trips, we recommend this extremely low-wear, QStE 460 steel sprocket. dölj mer info

7771095105004

Lagerstatus: 1
Pris: 635kr
PowerParts|Archive
Rear sprocket
The orange rear sprocket is already a true classic that has established itself with really strong arguments and many benefits:
  • Manufactured from high-strength 7075-T6 aluminum, the strongest aluminum in the world
  • Free from vibration - therefore the highest power transmission efficiency
  • No small stones or dirt particles can become stuck under the chain thanks to angled recesses between the teeth
  • Orange anodized with a permanent, organic and environmentally friendly pigment
The orange rear sprocket is already a true classic that has established itself with really strong arguments and many benefits:<ul><li class="li-disc">Manufactured from high-strength 7075-T6 aluminum, the strongest aluminum in the world</li><li class="li-disc">Free from vibration - therefore the highest power transmission efficiency</li><li class="li-disc">No small stones or dirt particles can become stuck under the chain thanks to angled recesses between the teeth</li><li class="li-disc">Orange anodized with a permanent, organic and environmentally friendly pigment</li></ul> dölj mer info

58210951048

Lagerstatus: hos lev.
Pris: 335kr
PowerParts|Archive
Rear sprocket
dölj mer info

7771015104801

Lagerstatus: 2
Pris: 420kr
PowerParts|Archive
Rear sprocket
  • Manufactured from high-strength 7075-T6 aluminium - the world's strongest aluminium.
  • Sprockets with different teeth number as stock are CCCUO_EU!
<ul><li class="li-square">Manufactured from high-strength 7075-T6 aluminium - the world's strongest aluminium.</li><li class="li-square">Sprockets with different teeth number as stock are CCCUO_EU!</li></ul> dölj mer info

7771015104901

Lagerstatus: 1
Pris: 420kr
PowerParts|Archive
Rear sprocket
dölj mer info

7771015105101

Lagerstatus: hos lev.
Pris: 420kr
PowerParts|Archive
Rear sprocket
  • Manufactured from high-strength 7075-T6 aluminum - the world's strongest aluminum
<ul><li class="li-disc">Manufactured from high-strength 7075-T6 aluminum - the world's strongest aluminum</li></ul> dölj mer info

58310151052

Lagerstatus: 1
Pris: 420kr
PowerParts|Archive
Rear sprocket
  • Manufactured from high-strength 7075-T6 aluminum - the world's strongest aluminum
<ul><li class="li-disc">Manufactured from high-strength 7075-T6 aluminum - the world's strongest aluminum</li></ul> dölj mer info

7771095104804

Lagerstatus: 2
Pris: 635kr
PowerParts|Archive
Rear sprocket

The orange rear sprocket is already a true classic that has established itself with really strong arguments and many benefits:

  • Manufactured from high-strength 7075-T6 aluminium, the strongest aluminium in the world
  • Free from vibration - therefore the highest power transmission efficiency
  • No small stones or dirt particles can become stuck under the chain thanks to angled recesses between the teeth
  • Orange anodised with a permanent, organic and environmentally friendly pigment
<p>The orange rear sprocket is already a true classic that has established itself with really strong arguments and many benefits:<br /></p><ul><li class="li-square">Manufactured from high-strength 7075-T6 aluminium, the strongest aluminium in the world</li><li class="li-square">Free from vibration - therefore the highest power transmission efficiency</li><li class="li-square">No small stones or dirt particles can become stuck under the chain thanks to angled recesses between the teeth</li><li class="li-square">Orange anodised with a permanent, organic and environmentally friendly pigment</li></ul> dölj mer info

7771095104904

Lagerstatus: 2
Pris: 635kr
PowerParts|Archive
Rear sprocket

The orange rear sprocket is already a true classic that has established itself with really strong arguments and many benefits:

  • Manufactured from high-strength 7075-T6 aluminium, the strongest aluminium in the world
  • Free from vibration - therefore the highest power transmission efficiency
  • No small stones or dirt particles can become stuck under the chain thanks to angled recesses between the teeth
  • Orange anodised with a permanent, organic and environmentally friendly pigment

The orange rear sprocket is already a true classic that has established itself with really strong arguments and many benefits:

  • Manufactured from high-strength 7075-T6 aluminium, the strongest aluminium in the world
  • Free from vibration - therefore the highest power transmission efficiency
  • No small stones or dirt particles can become stuck under the chain thanks to angled recesses between the teeth
  • Orange anodised with a permanent, organic and environmentally friendly pigment
<p>The orange rear sprocket is already a true classic that has established itself with really strong arguments and many benefits:<br /></p><ul><li class="li-square">Manufactured from high-strength 7075-T6 aluminium, the strongest aluminium in the world</li><li class="li-square">Free from vibration - therefore the highest power transmission efficiency</li><li class="li-square">No small stones or dirt particles can become stuck under the chain thanks to angled recesses between the teeth</li><li class="li-square">Orange anodised with a permanent, organic and environmentally friendly pigment</li></ul><p></p><p>The orange rear sprocket is already a true classic that has established itself with really strong arguments and many benefits:<br /></p><ul><li class="li-square">Manufactured from high-strength 7075-T6 aluminium, the strongest aluminium in the world</li><li class="li-square">Free from vibration - therefore the highest power transmission efficiency</li><li class="li-square">No small stones or dirt particles can become stuck under the chain thanks to angled recesses between the teeth</li><li class="li-square">Orange anodised with a permanent, organic and environmentally friendly pigment</li></ul> dölj mer info

7771095105204

Lagerstatus: 1
Pris: 635kr
PowerParts|Archive
Rear sprocket
The orange rear sprocket is already a true classic that has established itself with really strong arguments and many benefits:
  • Manufactured from high-strength 7075-T6 aluminum, the strongest aluminum in the world
  • Free from vibration - therefore the highest power transmission efficiency
  • No small stones or dirt particles can become stuck under the chain thanks to angled recesses between the teeth
  • Orange anodized with a permanent, organic and environmentally friendly pigment
The orange rear sprocket is already a true classic that has established itself with really strong arguments and many benefits:<ul><li class="li-disc">Manufactured from high-strength 7075-T6 aluminum, the strongest aluminum in the world</li><li class="li-disc">Free from vibration - therefore the highest power transmission efficiency</li><li class="li-disc">No small stones or dirt particles can become stuck under the chain thanks to angled recesses between the teeth</li><li class="li-disc">Orange anodized with a permanent, organic and environmentally friendly pigment</li></ul> dölj mer info

5831005024491

Lagerstatus: hos lev.
Pris: 1760kr
PowerParts|Archive
Rear sprocket carrier
dölj mer info

2611000104430

Lagerstatus: hos lev.
Pris: 7310kr
PowerParts|Archive
Rear wheel 5.0x17"
Black anodized.
Black anodized. dölj mer info

77310201044

Lagerstatus: hos lev.
Pris: 5695kr
PowerParts|Archive
Rear wheel 5x17"
Silver.
Silver. dölj mer info

00029090100

Lagerstatus: 2
Pris: 635kr
PowerParts|Archive
Sag scale
Makes setting the sag significantly simpler. Folding version for easy stowing in the tool box.
Makes setting the sag significantly simpler. Folding version for easy stowing in the tool box. dölj mer info

00029999300

Lagerstatus: hos lev.
Pris: 1150kr
PowerParts|Archive
Screw kit
Contains all the most-used bolts and small parts for current SX and EXC models. 30 % saving compared with purchasing individual parts.
Contains all the most-used bolts and small parts for current SX and EXC models. 30 % saving compared with purchasing individual parts. dölj mer info

00029999300

Lagerstatus: hos lev.
Pris: 1150kr
PowerParts|Archive
Screw kit
Contains all the most-used bolts and small parts for current SX and EXC models. 30 % saving compared with purchasing individual parts.
Contains all the most-used bolts and small parts for current SX and EXC models. 30 % saving compared with purchasing individual parts. dölj mer info

00029999300

Lagerstatus: hos lev.
Pris: 1150kr
PowerParts|Archive
Screw kit
Contains all the most-used bolts and small parts for current SX and EXC models. 30 % saving compared with purchasing individual parts.
Contains all the most-used bolts and small parts for current SX and EXC models. 30 % saving compared with purchasing individual parts. dölj mer info

7802996200030

Lagerstatus: 3
Pris: 170kr
PowerParts|Archive
Screw pan
Magnetic. Never lose a bolt again!
Perfect for use in combination with the SX stand.
Magnetic. Never lose a bolt again!<br />Perfect for use in combination with the SX stand. dölj mer info

79012906000

Lagerstatus: hos lev.
Pris: 1495kr
PowerParts|Archive
Service pit mat
These mats conform with the official FIM regulations already mandatory on many routes corresponds. The facts:
  • Made from polyester, with special rubberized back
  • Gas and oil resistant
  • In special KTM design
  • Size: 100 x 170 cm
These mats conform with the official FIM regulations already mandatory on many routes corresponds. The facts:<ul><li class="li-disc">Made from polyester, with special rubberized back</li><li class="li-disc"> Gas and oil resistant</li><li class="li-disc">In special KTM design</li><li class="li-disc">Size: 100 x 170 cm</li></ul> dölj mer info

78003190100

Lagerstatus: hos lev.
Pris: 1245kr
PowerParts|Archive
Skid plate
Never without one! KTM plastic skid plates combine many special qualities:
  • Manufactured using state-of-the-art plastic injection moulding technology
  • Made from special high-strength plastic
  • Developed for use in the toughest offroad terrain
  • Maximum protection at minimum possible weight
  • Precisely fitting design - especially for KTM models
  • Simple installation making use of a special quick-release mechanism
  • Removed in five seconds flat
Never without one! KTM plastic skid plates combine many special qualities: <ul><li class="li-disc"> Manufactured using state-of-the-art plastic injection moulding technology</li><li class="li-disc"> Made from special high-strength plastic</li><li class="li-disc"> Developed for use in the toughest offroad terrain</li><li class="li-disc"> Maximum protection at minimum possible weight</li><li class="li-disc"> Precisely fitting design - especially for KTM models</li><li class="li-disc"> Simple installation making use of a special quick-release mechanism</li><li class="li-disc"> Removed in five seconds flat</li></ul> dölj mer info

00029996000

Lagerstatus: 3
Pris: 2660kr
PowerParts|Archive
Spoke torque wrench
On this spoke wrench, the torque is preset at 5.4 Nm. This prevents over-tightening of the spoke nipples. Too much torque when tightening the spoke nipples is the most frequent cause of broken spokes. Wrench size 6.8 mm.
On this spoke wrench, the torque is preset at 5.4 Nm. This prevents over-tightening of the spoke nipples. Too much torque when tightening the spoke nipples is the most frequent cause of broken spokes. Wrench size 6.8 mm. dölj mer info

77212991100

Lagerstatus: 3
Pris: 170kr
PowerParts|Archive
Spoke wrench
6 mm and 7 mm.
6 mm and 7 mm. dölj mer info

77212991100

Lagerstatus: 3
Pris: 170kr
PowerParts|Archive
Spoke wrench
6 mm and 7 mm
6 mm and 7 mm dölj mer info

5030501700004

Lagerstatus: 1
Pris: 150kr
PowerParts|Archive
Spring hook
Tool for removing exhaust springs
Tool for removing exhaust springs dölj mer info

77212905444

Lagerstatus: hos lev.
Pris: 1845kr
PowerParts|Archive
Steering damper counter bearing
dölj mer info

78712916000

Lagerstatus: 3
Pris: 170kr
PowerParts|Archive
Supporting strap
dölj mer info

78712917000

Lagerstatus: 3
Pris: 255kr
PowerParts|Archive
Supporting strap
dölj mer info

78102994100

Lagerstatus: 3
Pris: 310kr
PowerParts|Archive
Throttle cable protection
Who hasn't had to interrupt a training session or even abandon a race due to a snapped throttle cable? This simple-to-fit, aluminum part reduces this risk to a minimum. The protector is simply attached to the throttle cable guide on the throttle grip, thereby preventing the throttle cable from snapping.
Who hasn't had to interrupt a training session or even abandon a race due to a snapped throttle cable? This simple-to-fit, aluminum part reduces this risk to a minimum. The protector is simply attached to the throttle cable guide on the throttle grip, thereby preventing the throttle cable from snapping. dölj mer info

00029098300

Lagerstatus: hos lev.
Pris: 800kr
PowerParts|Archive
Toolbox
38-piece, 1/4" toolbox in orange with high-quality, chrome-vanadium tools.
Content:
  • Ratchet (with locking device), lever, two extensions and socket wrench
  • Hexagon sockets from 4 to 14
  • Allen keys from 3 to 8
  • Phillips, slotted and Torx bits
With this, small jobs on your KTM can be completed quickly and reliably. Whether you're removing fairings or changing the oil, you'll definitely find the right tool here.
38-piece, 1/4" toolbox in orange with high-quality, chrome-vanadium tools.<br />Content:<ul><li class="li-disc">Ratchet (with locking device), lever, two extensions and socket wrench</li><li class="li-disc">Hexagon sockets from 4 to 14</li><li class="li-disc">Allen keys from 3 to 8</li><li class="li-disc">Phillips, slotted and Torx bits</li></ul>With this, small jobs on your KTM can be completed quickly and reliably. Whether you're removing fairings or changing the oil, you'll definitely find the right tool here. dölj mer info

00029098400

Lagerstatus: 2
Pris: 1845kr
PowerParts|Archive
Toolbox
60-piece, 3/8" toolbox in orange with high-quality, chrome-vanadium tools.
Content:
  • Ratchet (with locking device), lever, two extensions and socket wrench
  • Hexagon sockets from 6 to 24
  • Allen keys from 3 to 10
  • Phillips and slotted bits
  • Torx bits from 15 to 55
With this, small jobs on your KTM can be completed quickly and reliably. Whether you're removing fairings or changing the oil, you'll definitely find the right tool here.
60-piece, 3/8" toolbox in orange with high-quality, chrome-vanadium tools.<br />Content:<ul><li class="li-disc">Ratchet (with locking device), lever, two extensions and socket wrench</li><li class="li-disc">Hexagon sockets from 6 to 24</li><li class="li-disc">Allen keys from 3 to 10</li><li class="li-disc">Phillips and slotted bits</li><li class="li-disc">Torx bits from 15 to 55</li></ul>With this, small jobs on your KTM can be completed quickly and reliably. Whether you're removing fairings or changing the oil, you'll definitely find the right tool here. dölj mer info

7771097605004

Lagerstatus: 11
Pris: 170kr
PowerParts|Archive
Valve cap set
Orange anodized valve caps with valve opening function.
Orange anodized valve caps with valve opening function. dölj mer info

7771097615004

Lagerstatus: 9
Pris: 115kr
PowerParts|Archive
Valve cap set
dölj mer info

78109960000

Lagerstatus: 2
Pris: 1845kr
PowerParts|Archive
Wave brake disc
Floating, stainless steel brake disc. As a result of the hot disc being able to expand, the pressure point remains constant even at extreme temperatures and loads. The primary condition for consistently quick lap times.
Floating, stainless steel brake disc. As a result of the hot disc being able to expand, the pressure point remains constant even at extreme temperatures and loads. The primary condition for consistently quick lap times. dölj mer info

78110960000

Lagerstatus: 1
Pris: 1150kr
PowerParts|Archive
Wave brake disc
dölj mer info

25010960000

Lagerstatus: 1
Pris: 1150kr
PowerParts|Archive
Wave brake disc
  • Diameter 220 mm
  • Manufactured from special high-grade stainless steel
  • Full version for muddy track conditions
  • Minimizes wear of the brake linings
<ul><li class="li-square">Diameter 220 mm</li><li class="li-square">Manufactured from special high-grade stainless steel</li><li class="li-square">Full version for muddy track conditions</li><li class="li-square">Minimizes wear of the brake linings</li></ul> dölj mer info

25009260000

Lagerstatus: hos lev.
Pris: 2275kr
PowerParts|Archive
Wave brake disc
  • Diameter 310 mm
  • Floating brake disc manufactured from special high-grade stainless steel
  • Internal ring made from high-grade aluminum
  • Larger diameter for added braking performance
  • Minimal wear on brake linings
  • Can only be used in conjunction with the 4-piston brake caliper 58413015644/04 or 6-piston brake caliper 59413015044/04
<ul><li class="li-square">Diameter 310 mm</li><li class="li-square">Floating brake disc manufactured from special high-grade stainless steel</li><li class="li-square">Internal ring made from high-grade aluminum</li><li class="li-square">Larger diameter for added braking performance</li><li class="li-square">Minimal wear on brake linings</li><li class="li-square">Can only be used in conjunction with the 4-piston brake caliper 58413015644/04 or 6-piston brake caliper 59413015044/04</li></ul> dölj mer info

79610965118EB

Lagerstatus: hos lev.
Pris: 1495kr
PowerParts|Archive
Z-ring chain
DO YOU KNOW about the differences and benefits of a Z-ring or X-ring chain compared with an O-ring chain?
  • The Z-ring or X-ring has 4 contact points in contrast to 2 contact points with the O-ring version
  • This means higher flexibility and better running characteristics for the Z-ring or X-ring chain
  • The spring effect of the Z-ring or X-ring guarantees consistent and permanent lubrication
  • This means a significantly longer service life for the Z-ring or X-ring chain
  • The Z-ring or X-ring provides a better seal against penetration by water and dirt
DO YOU KNOW about the differences and benefits of a Z-ring or X-ring chain compared with an O-ring chain?<ul><li class="li-disc"> The Z-ring or X-ring has 4 contact points in contrast to 2 contact points with the O-ring version</li><li class="li-disc"> This means higher flexibility and better running characteristics for the Z-ring or X-ring chain</li><li class="li-disc"> The spring effect of the Z-ring or X-ring guarantees consistent and permanent lubrication </li><li class="li-disc"> This means a significantly longer service life for the Z-ring or X-ring chain </li><li class="li-disc"> The Z-ring or X-ring provides a better seal against penetration by water and dirt</li></ul> dölj mer info

5841301564404

Lagerstatus: 3
Pris: 7015kr
PowerParts|Brakes|Brake calipers
4 piston brake caliper
KTM brake calipers are distinguished by the following features:
  • CNC milled from high-strength solid aluminum
  • Chrome-plated pad guide pins on the brake caliper
  • The benefits:
    • Reduced brake pad canting, hence no uneven wear
    • Constant braking feel, irrespective of brake pad wear or temperature
    • No vibration from the brake

Fitting possible on SX/EXC models without adapter, with the original hand pump and brake hose.
Can only be fitted with a 17"or 16.5" front wheel. 310 mm brake disc 586.09.060.000 or 250.09.260.000 required.
In combination with brake disc 25009260000 (310 mm) no speedometer signal will be sent.

KTM brake calipers are distinguished by the following features:<br /><ul><li class="li-square">CNC milled from high-strength solid aluminum</li><li class="li-square">Chrome-plated pad guide pins on the brake caliper</li><li class="li-square">The benefits:<br /><ul><li class="li-disc">Reduced brake pad canting, hence no uneven wear</li><li class="li-disc">Constant braking feel, irrespective of brake pad wear or temperature</li><li class="li-disc">No vibration from the brake</li></ul></li></ul><p>Fitting possible on SX/EXC models without adapter, with the original hand pump and brake hose.<br />Can only be fitted with a 17"or 16.5" front wheel. 310 mm brake disc 586.09.060.000 or 250.09.260.000 required.<br />In combination with brake disc 25009260000 (310 mm) no speedometer signal will be sent.</p> dölj mer info

5941301504404

Lagerstatus: 1
Pris: 8930kr
PowerParts|Brakes|Brake calipers
6 piston brake caliper
KTM brake calipers are distinguished by the following features:
  • CNC-milled from high-strength solid aluminum
  • Chrome-plated pad guide pins on the brake caliper
  • The benefits:
    • Reduced brake pad canting, hence no uneven wear
    • Constant braking feel, irrespective of brake pad wear or temperature
    • No vibration from the brake

We recommend use of hand pump 587.13.001.100 and brake hose 594.13.011.000 (SX) or 800.13.011.000 (EXC).
Can only be fitted with a 17" or 16.5" front wheel. 310 mm brake disc 586.09.060.000 or 250.09.260.000 required.
In combination with brake disc 25009260000 (310 mm) no speedometer signal will be sent.

KTM brake calipers are distinguished by the following features:<br /><ul><li class="li-square">CNC-milled from high-strength solid aluminum</li><li class="li-square">Chrome-plated pad guide pins on the brake caliper</li><li class="li-square">The benefits:<br /><ul><li class="li-disc">Reduced brake pad canting, hence no uneven wear</li><li class="li-disc">Constant braking feel, irrespective of brake pad wear or temperature</li><li class="li-disc">No vibration from the brake</li></ul></li></ul><p>We recommend use of hand pump 587.13.001.100 and brake hose 594.13.011.000 (SX) or 800.13.011.000 (EXC).<br />Can only be fitted with a 17" or 16.5" front wheel. 310 mm brake disc 586.09.060.000 or 250.09.260.000 required.<br />In combination with brake disc 25009260000 (310 mm) no speedometer signal will be sent.</p> dölj mer info

77713975120

Lagerstatus: hos lev.
Pris: 1150kr
PowerParts|Brakes|Brake calipers
Brake caliper protection
  • Manufactured from carbon
  • Optimum protection against stone impacts
  • Can be installed on brake caliper supports 79613975044, 7771397501030, 7771397511030, 78113975044, 78113975144, 78113975244, 78913975044 or 78913975144
<ul><li class="li-square">Manufactured from carbon</li><li class="li-square">Optimum protection against stone impacts</li><li class="li-square">Can be installed on brake caliper supports 79613975044, 7771397501030, 7771397511030, 78113975044, 78113975144, 78113975244, 78913975044 or 78913975144</li></ul> dölj mer info

SXS07125712

Lagerstatus: hos lev.
Pris: 11490kr
PowerParts|Brakes|Brake calipers
Factory brake caliper
The factory-brake calliper is manufactured from high-strength aluminium, which makes it stiffer without adding any weight. The increased stiffness of the brake calliper results in a more precise pressure point and improved brake power. When fitting to SX models as of MY 2013, the CNC brake calliper support (7771397511030) must be used instead of the supplied brake calliper support due to the larger axle diameter.
The factory-brake calliper is manufactured from high-strength aluminium, which makes it stiffer without adding any weight. The increased stiffness of the brake calliper results in a more precise pressure point and improved brake power. When fitting to SX models as of MY 2013, the CNC brake calliper support (7771397511030) must be used instead of the supplied brake calliper support due to the larger axle diameter. dölj mer info

SXS09125512

Lagerstatus: hos lev.
Pris: 12125kr
PowerParts|Brakes|Brake calipers
Factory brake caliper
The Factory brake caliper is manufactured from high-strength aluminium, which makes it stiffer without adding any weight. The increased stiffness of the brake calliper results in a more precise pressure point and improved brake power.
The Factory brake caliper is manufactured from high-strength aluminium, which makes it stiffer without adding any weight. The increased stiffness of the brake calliper results in a more precise pressure point and improved brake power. dölj mer info

5941300100004

Lagerstatus: hos lev.
Pris: 7655kr
PowerParts|Brakes|Brake cylinders
Brake cylinder
The radial hand brake cylinder with 17,5 mm piston enables better leverage than conventional brake cylinders and is designed for offroad and supermoto models. CNC-machined from solid material and weighing in at only 305 g, it is extremely compact and very light. The short lever can be easily adjusted and delivers an extraordinarily precise feeling when applying the brakes. Ideal for use in combination with the 4-piston brake caliper 58413015644/04 or the 6-piston brake caliper 59413015044/04.
The radial hand brake cylinder with 17,5 mm piston enables better leverage than conventional brake cylinders and is designed for offroad and supermoto models. CNC-machined from solid material and weighing in at only 305 g, it is extremely compact and very light. The short lever can be easily adjusted and delivers an extraordinarily precise feeling when applying the brakes. Ideal for use in combination with the 4-piston brake caliper 58413015644/04 or the 6-piston brake caliper 59413015044/04. dölj mer info

57313001000

Lagerstatus: hos lev.
Pris: 4635kr
PowerParts|Brakes|Brake cylinders
Radial brake cylinder
The radial hand brake cylinder with 16 mm piston enables better leverage than conventional brake cylinders. The benefit: You need significantly less hand strength, can ride a larger piston and thus be supplied with a much better feeling for applying the brakes. Required for mounting: Brake fluid reservoir 545.13.030.044 and the associated retaining bracket 573.13.001.050.
The radial hand brake cylinder with 16 mm piston enables better leverage than conventional brake cylinders. The benefit: You need significantly less hand strength, can ride a larger piston and thus be supplied with a much better feeling for applying the brakes. Required for mounting: Brake fluid reservoir 545.13.030.044 and the associated retaining bracket 573.13.001.050. dölj mer info

58309060000

Lagerstatus: hos lev.
Pris: 2295kr
PowerParts|Brakes|Brake discs
Brake disc
  • Extra large for extra-high brake power
  • Manufactured from special high-grade stainless steel
  • Can only be used in conjunction with standard installed brake caliper, and the brake caliper support 58413014000 or 77013914000 is therefore required for this
<ul><li class="li-square">Extra large for extra-high brake power</li><li class="li-square">Manufactured from special high-grade stainless steel</li><li class="li-square">Can only be used in conjunction with standard installed brake caliper, and the brake caliper support 58413014000 or 77013914000 is therefore required for this</li></ul> dölj mer info

78909960000

Lagerstatus: hos lev.
Pris: 1730kr
PowerParts|Brakes|Brake discs
Flame brake disc
  • Floating brake disc manufactured from special high-grade stainless steel
  • Internal ring made from high-grade aluminum
  • With Flame design for added braking performance
  • Minimal wear on brake linings
<ul><li>Floating brake disc manufactured from special high-grade stainless steel</li><li>Internal ring made from high-grade aluminum</li><li>With Flame design for added braking performance</li><li>Minimal wear on brake linings</li></ul> dölj mer info

78109960000

Lagerstatus: 2
Pris: 1845kr
PowerParts|Brakes|Brake discs
Flame brake disc
  • Floating brake disc manufactured from special high-grade stainless steel
  • With Flame design for added braking performance
  • Minimal wear on brake linings
<ul><li>Floating brake disc manufactured from special high-grade stainless steel</li><li>With Flame design for added braking performance</li><li>Minimal wear on brake linings</li></ul> dölj mer info

78110960000

Lagerstatus: 1
Pris: 1150kr
PowerParts|Brakes|Brake discs
Flame brake disc
  • Manufactured from special high-grade stainless steel
  • With Flame design for added braking performance
  • Minimal wear on brake linings
<ul><li>Manufactured from special high-grade stainless steel</li><li>With Flame design for added braking performance</li><li>Minimal wear on brake linings</li></ul> dölj mer info

78910960000

Lagerstatus: hos lev.
Pris: 1150kr
PowerParts|Brakes|Brake discs
Flame brake disc
  • Manufactured from special high-grade stainless steel
  • Extra thick - i.e. 4.6 mm!
  • Potential fading of the brake is virtually completely excluded
  • Significantly longer lasting
  • With Flame design for added braking performance
  • Minimal wear on brake linings
<ul><li>Manufactured from special high-grade stainless steel</li><li>Extra thick - i.e. 4.6 mm!</li><li>Potential fading of the brake is virtually completely excluded</li><li>Significantly longer lasting</li><li>With Flame design for added braking performance</li><li>Minimal wear on brake linings</li></ul> dölj mer info

25010960000

Lagerstatus: 1
Pris: 1150kr
PowerParts|Brakes|Brake discs
Wave brake disc
The full equipment level for muddy track conditions minimizes the brake lining wear.
The full equipment level for muddy track conditions minimizes the brake lining wear. dölj mer info

58409060200

Lagerstatus: 1
Pris: 3125kr
PowerParts|Brakes|Brake discs
Wave brake disc
Floating, stainless steel brake disc. The inner ring is made of aluminum to save weight. The pressure point doesn’t change, even when subjected to extreme temperatures and forces. Please note: Combination with 58413014000 not possible! Not for use with 2-piston Brembo® brake caliper.
Floating, stainless steel brake disc. The inner ring is made of aluminum to save weight. The pressure point doesn’t change, even when subjected to extreme temperatures and forces. Please note: Combination with 58413014000 not possible! Not for use with 2-piston Brembo® brake caliper. dölj mer info

25009260000

Lagerstatus: hos lev.
Pris: 2275kr
PowerParts|Brakes|Brake discs
Wave brake disc
  • Floating brake disc manufactured from special high-grade stainless steel
  • Internal ring made from high-grade aluminum
  • With Wave design for added braking performance
  • Minimal wear on brake pads
  • Can only be used in conjunction with 4 piston brake caliper 5841301564404 or 6 piston brake caliper 5941301504404
  • In combination with 4 piston brake caliper 58413015644/04 no speedometer signal will be sent
<ul><li class="li-disc">Floating brake disc manufactured from special high-grade stainless steel</li><li class="li-disc">Internal ring made from high-grade aluminum</li><li class="li-disc">With Wave design for added braking performance</li><li class="li-disc">Minimal wear on brake pads</li><li class="li-disc">Can only be used in conjunction with 4 piston brake caliper 5841301564404 or 6 piston brake caliper 5941301504404</li><li class="li-disc">In combination with 4 piston brake caliper 58413015644/04 no speedometer signal will be sent</li></ul> dölj mer info

77709160000

Lagerstatus: 1
Pris: 1300kr
PowerParts|Brakes|Brake discs
Wave brake disc
  • Floating brake disc manufactured from special high-grade stainless steel
  • Internal ring made from special high-grade stainless steel
  • Minimal wear on brake linings
<ul><li class="li-square">Floating brake disc manufactured from special high-grade stainless steel</li><li class="li-square">Internal ring made from special high-grade stainless steel</li><li class="li-square">Minimal wear on brake linings</li></ul> dölj mer info

59013930100

Lagerstatus: 6
Pris: 310kr
PowerParts|Brakes|Brake linings
Brake pad
  • Made from a special material mix with a high proportion of organic substances, therefore softer
  • With ceramic underlayer for optimum thermal insulation
  • Lower friction coefficient than sintered brake pads, so less aggressive braking feel
  • Beneficial when particularly refined responsiveness is desired for ideal brake application
<ul><li class="li-square">Made from a special material mix with a high proportion of organic substances, therefore softer</li><li class="li-square">With ceramic underlayer for optimum thermal insulation</li><li class="li-square">Lower friction coefficient than sintered brake pads, so less aggressive braking feel </li><li class="li-square">Beneficial when particularly refined responsiveness is desired for ideal brake application</li></ul> dölj mer info

59013930200

Lagerstatus: 5
Pris: 450kr
PowerParts|Brakes|Brake linings
Brake pad
  • 100% sintered metals
  • Very high coefficient of friction for maximum and enduring braking power
  • Low "fading" tendency when hot
  • Very effective braking in the wet as well
  • Very hard and therefore extremely long-lasting
  • Particularly beneficial in extreme conditions (e.g. sand, gravel, etc.)
<ul><li class="li-square">100% sintered metals</li><li class="li-square">Very high coefficient of friction for maximum and enduring braking power</li><li class="li-square">Low "fading" tendency when hot</li><li class="li-square">Very effective braking in the wet as well</li><li class="li-square">Very hard and therefore extremely long-lasting</li><li class="li-square">Particularly beneficial in extreme conditions (e.g. sand, gravel, etc.)</li></ul> dölj mer info

54813990100

Lagerstatus: 2
Pris: 310kr
PowerParts|Brakes|Brake linings
Brake pad
  • Made from a special material mix with a high proportion of organic substances, therefore softer
  • With ceramic underlayer for optimum thermal insulation
  • Lower friction coefficient than sintered brake pads, so less aggressive braking feel
  • Beneficial when particularly refined responsiveness is desired for ideal brake application
<ul><li class="li-square">Made from a special material mix with a high proportion of organic substances, therefore softer</li><li class="li-square">With ceramic underlayer for optimum thermal insulation</li><li class="li-square">Lower friction coefficient than sintered brake pads, so less aggressive braking feel</li><li class="li-square">Beneficial when particularly refined responsiveness is desired for ideal brake application</li></ul> dölj mer info

54813990200

Lagerstatus: 3
Pris: 450kr
PowerParts|Brakes|Brake linings
Brake pad
  • 100% sintered metals
  • Very high coefficient of friction for maximum and enduring braking power
  • Low "fading" tendency when hot
  • Very effective braking in the wet as well
  • Very hard and therefore extremely long-lasting
  • Particularly beneficial in extreme conditions (e.g. sand, gravel, etc.)
<ul><li class="li-square">100% sintered metals</li><li class="li-square">Very high coefficient of friction for maximum and enduring braking power</li><li class="li-square">Low "fading" tendency when hot</li><li class="li-square">Very effective braking in the wet as well</li><li class="li-square">Very hard and therefore extremely long-lasting</li><li class="li-square">Particularly beneficial in extreme conditions (e.g. sand, gravel, etc.)</li></ul> dölj mer info

77013920100

Lagerstatus: 1
Pris: 565kr
PowerParts|Brakes|Special parts
Banjo bolt with bleeder function
Bleeding the brakes or changing the brake fluid is completed in a matter of seconds, even on your own: First replace the original bleeder screw on the brake caliper with this new bleeder screw equipped with a check valve. When changing the brake fluid or bleeding the system, simply release the screw on the check valve by a half turn and pump the brake fluid through the system with the brake lever. The valve prevents air from forcing its way back into the system on releasing the brake lever. Supplied with an anodized dust cap.
Bleeding the brakes or changing the brake fluid is completed in a matter of seconds, even on your own: First replace the original bleeder screw on the brake caliper with this new bleeder screw equipped with a check valve. When changing the brake fluid or bleeding the system, simply release the screw on the check valve by a half turn and pump the brake fluid through the system with the brake lever. The valve prevents air from forcing its way back into the system on releasing the brake lever. Supplied with an anodized dust cap. dölj mer info

78013920000

Lagerstatus: 2
Pris: 450kr
PowerParts|Brakes|Special parts
Brake bleeder screw
Bleeding the brakes or changing the brake fluid is completed in a matter of seconds, even on your own: First replace the original bleeder screw on the brake caliper with this new bleeder screw equipped with a check valve. When changing the brake fluid or bleeding the system, simply release the screw on the check valve by a half turn and pump the brake fluid through the system with the brake lever. The valve prevents air from forcing its way back into the system on releasing the brake lever. Supplied with an anodized dust cap. Suitable for the front brake caliper.
Bleeding the brakes or changing the brake fluid is completed in a matter of seconds, even on your own: First replace the original bleeder screw on the brake caliper with this new bleeder screw equipped with a check valve. When changing the brake fluid or bleeding the system, simply release the screw on the check valve by a half turn and pump the brake fluid through the system with the brake lever. The valve prevents air from forcing its way back into the system on releasing the brake lever. Supplied with an anodized dust cap. Suitable for the front brake caliper. dölj mer info

78913914100

Lagerstatus: 1
Pris: 915kr
PowerParts|Brakes|Special parts
Brake caliper support
Required for using the 270 mm brake disc 78909960000 and 2-piston Brembo brake caliper.
Required for using the 270 mm brake disc 78909960000 and 2-piston Brembo brake caliper. dölj mer info

77013914000

Lagerstatus: 1
Pris: 1150kr
PowerParts|Brakes|Special parts
Brake caliper support
  • Required when installing brake disc 58309060000
<ul><li class="li-square">Required when installing brake disc 58309060000</li></ul> dölj mer info

78113975244

Lagerstatus: hos lev.
Pris: 1845kr
PowerParts|Brakes|Special parts
Brake caliper support with brake disc guard
The integrated brake disc guard protects the rear brake disc during a camber or in the heat of battle from rocks or other fixed obstacles. The brake caliper support is lighter and stiffer than the installed standard unit. The stiffness has a positive effect on braking characteristics such as braking power and modulation. CNC machined from the highest quality aluminum and anodized in black and orange. Optionally available: Carbon composite brake caliper guard 77713975120
The integrated brake disc guard protects the rear brake disc during a camber or in the heat of battle from rocks or other fixed obstacles. The brake caliper support is lighter and stiffer than the installed standard unit. The stiffness has a positive effect on braking characteristics such as braking power and modulation. CNC machined from the highest quality aluminum and anodized in black and orange. Optionally available: Carbon composite brake caliper guard 77713975120 dölj mer info

79613975044

Lagerstatus: hos lev.
Pris: 1845kr
PowerParts|Brakes|Special parts
Brake caliper support with brake disc guard
The integrated brake disc guard protects the rear brake disc during a camber or in the heat of battle from rocks or other fixed obstacles. The brake caliper support is lighter and stiffer than the installed standard unit. The stiffness has a positive effect on braking characteristics such as braking power and modulation. CNC machined from the highest quality aluminum and anodized in black and orange. Optionally available: Carbon composite brake caliper guard 77713975120
The integrated brake disc guard protects the rear brake disc during a camber or in the heat of battle from rocks or other fixed obstacles. The brake caliper support is lighter and stiffer than the installed standard unit. The stiffness has a positive effect on braking characteristics such as braking power and modulation. CNC machined from the highest quality aluminum and anodized in black and orange. Optionally available: Carbon composite brake caliper guard 77713975120 dölj mer info

5481096120004

Lagerstatus: 2
Pris: 915kr
PowerParts|Brakes|Special parts
Brake disc guard
Protects the rear brake disc from stones or other solid objects in the event of a crash or when riding hard. Manufactured from high-strength aluminum.
Protects the rear brake disc from stones or other solid objects in the event of a crash or when riding hard. Manufactured from high-strength aluminum. dölj mer info

5481096120030

Lagerstatus: 2
Pris: 915kr
PowerParts|Brakes|Special parts
Brake disc guard
Protects the rear brake disc from stones or other solid objects in the event of a crash or when riding hard. Manufactured from high-strength aluminum.
Protects the rear brake disc from stones or other solid objects in the event of a crash or when riding hard. Manufactured from high-strength aluminum. dölj mer info

50313082200

Lagerstatus: 2
Pris: 115kr
PowerParts|Brakes|Special parts
Brake pad retaining pin
Lost pins are a thing of the past. With these bolts, changing brake pads is possible even in difficult conditions: quickly and simply!
Lost pins are a thing of the past. With these bolts, changing brake pads is possible even in difficult conditions: quickly and simply! dölj mer info

79013961000

Lagerstatus: 7
Pris: 285kr
PowerParts|Brakes|Special parts
Footbrake cylinder extender
  • Increases the volume of the foot brake cylinder
  • The surface structure reduces the heat-up of the brake fluid
  • Helps to eliminate dreaded "fading"
  • Space requirements: Total height including cover approximately 26,5 mm
<ul><li class="li-square">Increases the volume of the foot brake cylinder</li><li class="li-square">The surface structure reduces the heat-up of the brake fluid</li><li class="li-square">Helps to eliminate dreaded "fading"</li><li class="li-square">Space requirements: Total height including cover approximately 26,5 mm</li></ul> dölj mer info

78113900100

Lagerstatus: 1
Pris: 1150kr
PowerParts|Brakes|Special parts
Rear brake conversion kit
For use with the automatic clutch. Allows braking of the rear wheel with the left hand, hence providing additional control in critical situations (e.g. steep downhills).
For use with the automatic clutch. Allows braking of the rear wheel with the left hand, hence providing additional control in critical situations (e.g. steep downhills). dölj mer info

54812063044

Lagerstatus: 2
Pris: 115kr
PowerParts|Brakes|Special parts
Rear brake safety wire

Prevents twigs being caught between the engine and the foot brake lever and the foot brake lever being bent or blocked by this.

<p>Prevents twigs being caught between the engine and the foot brake lever and the foot brake lever being bent or blocked by this.</p> dölj mer info

SXS04125100

Lagerstatus: 3
Pris: 500kr
PowerParts|Carbon|Offroad
Carbon fuel tap guard
DO YOU KNOW about the special properties of carbon?
  • Extremely light: about 80% lighter than steel with the same load-bearing capacity
  • Very stable: 4 times more resilient than aluminum
  • Ultimate stiffness and strength
  • Free from corrosion
  • High continuous temperature resistance
  • Low thermal expansion
  • And, last but not least, a cool look
    Pimp your KTM with carbon components from KTM PowerParts - they save weight and look great.
Prevents inadvertent actuation of the fuel tap.
DO YOU KNOW about the special properties of carbon?<ul><li class="li-disc"> Extremely light: about 80% lighter than steel with the same load-bearing capacity</li><li class="li-disc"> Very stable: 4 times more resilient than aluminum</li><li class="li-disc"> Ultimate stiffness and strength</li><li class="li-disc"> Free from corrosion</li><li class="li-disc"> High continuous temperature resistance</li><li class="li-disc"> Low thermal expansion</li><li class="li-disc"> And, last but not least, a cool look<br />Pimp your KTM with carbon components from KTM PowerParts - they save weight and look great.</li></ul>Prevents inadvertent actuation of the fuel tap. dölj mer info

7900199400049

Lagerstatus: hos lev.
Pris: 1380kr
PowerParts|Carbon|Offroad
Fork protector kit
  • Made of carbon
  • Optimum protection against roost
  • Made to fit all 48 mm forks
<ul><li class="li-square">Made of carbon</li><li class="li-square">Optimum protection against roost </li><li class="li-square">Made to fit all 48 mm forks</li></ul> dölj mer info

50310165118

Lagerstatus: 4
Pris: 915kr
PowerParts|Chains/rear sprockets|Chains
Chain
Sometimes less can mean more! O and Z-rings have been dispensed with completely on this chain specially developed for motocross use. That and the special construction of the bearing bushes result in the perfect compromise between durability and minimum power loss.
Sometimes less can mean more! O and Z-rings have been dispensed with completely on this chain specially developed for motocross use. That and the special construction of the bearing bushes result in the perfect compromise between durability and minimum power loss. dölj mer info

79010965118EB

Lagerstatus: 3
Pris: 1150kr
PowerParts|Chains/rear sprockets|Chains
Chain
Sometimes less can mean more! O and Z-rings have been dispensed with completely on this chain specially developed for motocross use. That and the special construction of the bearing bushes result in the perfect compromise between durability and minimum power loss.
Sometimes less can mean more! O and Z-rings have been dispensed with completely on this chain specially developed for motocross use. That and the special construction of the bearing bushes result in the perfect compromise between durability and minimum power loss. dölj mer info

69010965120

Lagerstatus: hos lev.
Pris: 2310kr
PowerParts|Chains/rear sprockets|Chains
Chain
High-strength, free-running chain that reduces resistance! This means extra power!
High-strength, free-running chain that reduces resistance! This means extra power! dölj mer info

78010167118

Lagerstatus: 3
Pris: 1265kr
PowerParts|Chains/rear sprockets|Chains
X-ring chain
DO YOU KNOW about the differences and benefits of a Z-ring or X-ring chain compared with an O-ring chain?
  • The Z-ring or X-ring has 4 contact points in contrast to 2 contact points with the O-ring version
  • This means higher flexibility and better running characteristics for the Z-ring or X-ring chain
  • The spring effect of the Z-ring or X-ring guarantees consistent and permanent lubrication
  • This means a significantly longer service life for the Z-ring or X-ring chain
  • The Z-ring or X-ring provides a better seal against penetration by water and dirt
DO YOU KNOW about the differences and benefits of a Z-ring or X-ring chain compared with an O-ring chain?<ul><li class="li-disc"> The Z-ring or X-ring has 4 contact points in contrast to 2 contact points with the O-ring version</li><li class="li-disc"> This means higher flexibility and better running characteristics for the Z-ring or X-ring chain</li><li class="li-disc"> The spring effect of the Z-ring or X-ring guarantees consistent and permanent lubrication </li><li class="li-disc"> This means a significantly longer service life for the Z-ring or X-ring chain </li><li class="li-disc"> The Z-ring or X-ring provides a better seal against penetration by water and dirt</li></ul> dölj mer info

79610965118EB

Lagerstatus: hos lev.
Pris: 1495kr
PowerParts|Chains/rear sprockets|Chains
XW-ring chain
  • higher flexibility and better running characteristics
  • consistent and permanent lubrication
  • better seal against water and dirt
  • significantly longer service life
<ul><li class="li-square">higher flexibility and better running characteristics</li><li class="li-square">consistent and permanent lubrication</li><li class="li-square">better seal against water and dirt</li><li class="li-square">significantly longer service life</li></ul> dölj mer info

7771095105004

Lagerstatus: 1
Pris: 635kr
PowerParts|Chains/rear sprockets|Rear sprockets
Rear sprocket
  • Manufactured from high-strength 7075-T6 aluminum, the strongest aluminum in the world
  • Originally developed for the aerospace industry and then adopted by the best rear sprocket manufacturer
  • The chain runs smoothly, straigt as a die and true, because it`s ground level to an accuracy of 0.002mm
  • Free from vibration - therefore the highest power transmission efficiency
  • Orange anodized with a permanent, organic and environmentally friendly pigment
  • Sprockets with different teeth number as stock are CCCUO_EU!
<ul><li class="li-square">Manufactured from high-strength 7075-T6 aluminum, the strongest aluminum in the world</li><li class="li-square">Originally developed for the aerospace industry and then adopted by the best rear sprocket manufacturer</li><li class="li-square">The chain runs smoothly, straigt as a die and true, because it`s ground level to an accuracy of 0.002mm</li><li class="li-square">Free from vibration - therefore the highest power transmission efficiency</li><li class="li-square">Orange anodized with a permanent, organic and environmentally friendly pigment</li><li class="li-square">Sprockets with different teeth number as stock are CCCUO_EU!</li></ul> dölj mer info

58210951042

Lagerstatus: 1
Pris: 335kr
PowerParts|Chains/rear sprockets|Rear sprockets
Rear sprocket
  • For longer trips, we recommend this extremely low-wear, QStE 460 steel sprocket.
  • Sprockets with different teeth number as stock are CCCUO_EU!
<ul><li class="li-square">For longer trips, we recommend this extremely low-wear, QStE 460 steel sprocket.</li><li class="li-square">Sprockets with different teeth number as stock are CCCUO_EU!</li></ul> dölj mer info

5841005103804

Lagerstatus: 1
Pris: 755kr
PowerParts|Chains/rear sprockets|Rear sprockets
Supersprox stealth rear sprocket
If you are looking for the highest quality and performance, this rear sprocket is just the thing for you!
  • High-strength alloy steel teeth for extra long life
  • Aluminum center section reduces the unsprung mass
  • Permanently joined together with high-tensile rivets
  • At least three times longer service life than any other aluminum rear sprockets
  • 50% lighter than conventional steel sprockets

Further advantages: Longer service life of the entire drive train kit

Manufactured exclusively for KTM by Supersprox. This product is protected by the following patents in the EU and the US. EU Patent # EP1573234. US Patent # 7.481.729. Patent holder Supersprox a.s.

If you are looking for the highest quality and performance, this rear sprocket is just the thing for you!<ul><li class="li-disc">High-strength alloy steel teeth for extra long life</li><li class="li-disc">Aluminum center section reduces the unsprung mass</li><li class="li-disc">Permanently joined together with high-tensile rivets</li><li class="li-disc">At least three times longer service life than any other aluminum rear sprockets</li><li class="li-disc">50% lighter than conventional steel sprockets</li></ul><p>Further advantages: Longer service life of the entire drive train kit</p><p>Manufactured exclusively for KTM by Supersprox. This product is protected by the following patents in the EU and the US. EU Patent # EP1573234. US Patent # 7.481.729. Patent holder Supersprox a.s.</p> dölj mer info

5841005104104

Lagerstatus: hos lev.
Pris: 755kr
PowerParts|Chains/rear sprockets|Rear sprockets
Supersprox stealth rear sprocket
  • High-strength alloy steel teeth for extra long life
  • Aluminum center section reduces the unsprung mass
  • Permanently joined together with high-tensile rivets
  • At least three times longer service life than any other aluminum rear sprockets
  • 50% lighter than conventional steel sprockets

Further advantages: Longer service life of the entire drive train kit

<ul><li class="li-square">High-strength alloy steel teeth for extra long life</li><li class="li-square">Aluminum center section reduces the unsprung mass</li><li class="li-square">Permanently joined together with high-tensile rivets</li><li class="li-square">At least three times longer service life than any other aluminum rear sprockets</li><li class="li-square">50% lighter than conventional steel sprockets</li></ul><p>Further advantages: Longer service life of the entire drive train kit</p> dölj mer info

7900305300004

Lagerstatus: 5
Pris: 125kr
PowerParts|Chains/rear sprockets|Special parts
Chain slider

In orange Factory look.

<p>In orange Factory look.</p> dölj mer info

7730305300004

Lagerstatus: 2
Pris: 125kr
PowerParts|Chains/rear sprockets|Special parts
Chain slider
In orange factory look.
<div class="gs01l">In orange factory look.</div> dölj mer info

7730406600004

Lagerstatus: 2
Pris: 255kr
PowerParts|Chains/rear sprockets|Special parts
Chain sliding protection
In orange factory look.
<div class="gs01l">In orange factory look.</div> dölj mer info

7810407010004

Lagerstatus: 5
Pris: 375kr
PowerParts|Chains/rear sprockets|Special parts
Chainguide
In orange factory look.
<div class="gs01l">In orange factory look.</div> dölj mer info

7810497000004

Lagerstatus: 2
Pris: 1380kr
PowerParts|Chains/rear sprockets|Special parts
Chainguide
The TM Designworks chain guide, as used by the KTM Factory Team:
  • CNC-machined from Teflon
  • With replaceable chain running surface, hence extremely durable
  • Specially designed for the challenges of offroad use
Pay attention to clearance when used in combination with a 2K chain guide. The chain guide may need to be adapted accordingly.
The TM Designworks chain guide, as used by the KTM Factory Team: <ul><li class="li-disc"> CNC-machined from Teflon</li><li class="li-disc"> With replaceable chain running surface, hence extremely durable</li><li class="li-disc"> Specially designed for the challenges of offroad use</li></ul>Pay attention to clearance when used in combination with a 2K chain guide. The chain guide may need to be adapted accordingly. dölj mer info

78104974100

Lagerstatus: 1
Pris: 915kr
PowerParts|Chains/rear sprockets|Special parts
Chainguide bracket protection
  • Manufactured from high-strength aluminum
  • Protects the chain guide bracket from major damage
  • Cannot be used in combination with the T.M. Designworks chain guide
<ul><li class="li-square">Manufactured from high-strength aluminum</li><li class="li-square">Protects the chain guide bracket from major damage</li><li class="li-square">Cannot be used in combination with the T.M. Designworks chain guide</li></ul> dölj mer info

SXS05450210

Lagerstatus: 3
Pris: 290kr
PowerParts|CNC-parts, anodized|Chassis
Brake cylinder and clutch reservoir cover
Installation possible with all Brembo® brake and clutch master cylinders.
Installation possible with all Brembo® brake and clutch master cylinders. dölj mer info

SXS08300040

Lagerstatus: hos lev.
Pris: 450kr
PowerParts|CNC-parts, anodized|Chassis
Factory adjuster wheel set
DID YOU KNOW that all KTM CNC parts are manufactured from high grade aluminum, which not only looks great but can also stand up to the toughest loads? The original factory look, anodized aluminum PowerParts are just the thing to give your KTM that something special.
Not suitable for air forks.
DID YOU KNOW that all KTM CNC parts are manufactured from high grade aluminum, which not only looks great but can also stand up to the toughest loads? The original factory look, anodized aluminum PowerParts are just the thing to give your KTM that something special.<br />Not suitable for air forks. dölj mer info

U6951981

Lagerstatus: 4
Pris: 255kr
PowerParts|CNC-parts, anodized|Chassis
Footbrake cylinder cover
DO YOU KNOW that all KTM CNC parts are manufactured from highest quality aluminum and therefore not only look good, they also withstand the toughest treatment? With the anodized aluminum components in the original factory look from the PowerParts range, you can turn your KTM into something very special.
DO YOU KNOW that all KTM CNC parts are manufactured from highest quality aluminum and therefore not only look good, they also withstand the toughest treatment? With the anodized aluminum components in the original factory look from the PowerParts range, you can turn your KTM into something very special. dölj mer info

54813951100

Lagerstatus: 1
Pris: 565kr
PowerParts|CNC-parts, anodized|Chassis
Footbrake lever step plate
7 mm wider contact surface than standard.
7 mm wider contact surface than standard. dölj mer info

77734931144

Lagerstatus: 1
Pris: 565kr
PowerParts|CNC-parts, anodized|Chassis
Gear shift lever step plate
dölj mer info

77338941044

Lagerstatus: 3
Pris: 450kr
PowerParts|CNC-parts, anodized|Engine
Oil filter cover
CNC machined version, highly resistant aluminium
Precious anodized surface
CNC machined version, highly resistant aluminium<br />Precious anodized surface dölj mer info

79430920044

Lagerstatus: 20
Pris: 230kr
PowerParts|CNC-parts, anodized|Engine
Oil plug
'CNC machined version, highly resistant aluminium
Precious anodized surface
'CNC machined version, highly resistant aluminium<br />Precious anodized surface dölj mer info

SXS07450265

Lagerstatus: 1
Pris: 335kr
PowerParts|CNC-parts, anodized|Engine
Oil pump cover
DO YOU KNOW that all KTM CNC parts are manufactured from highest quality aluminum and therefore not only look good, they also withstand the toughest treatment? With the anodized aluminum components in the original factory look from the PowerParts range, you can turn your KTM into something very special.
DO YOU KNOW that all KTM CNC parts are manufactured from highest quality aluminum and therefore not only look good, they also withstand the toughest treatment? With the anodized aluminum components in the original factory look from the PowerParts range, you can turn your KTM into something very special. dölj mer info

54835980000

Lagerstatus: 20
Pris: 92kr
PowerParts|Cooling|Protection
Foam rubber
For extremely muddy conditions. Prevents the radiator from becoming clogged with mud and the engine from overheating.
For extremely muddy conditions. Prevents the radiator from becoming clogged with mud and the engine from overheating. dölj mer info

7733503400030

Lagerstatus: 4
Pris: 92kr
PowerParts|Cooling|Protection
Radiator protection
Suitable for the left and right side.
Suitable for the left and right side. dölj mer info

78135936100

Lagerstatus: 1
Pris: 1150kr
PowerParts|Cooling|Protection
Radiator protection
Perfect protection for the radiator; easily fitted.
Perfect protection for the radiator; easily fitted. dölj mer info

7733503400028

Lagerstatus: 3
Pris: 92kr
PowerParts|Cooling|Protection
Radiator protection
Suitable for the left and right side.
Suitable for the left and right side. dölj mer info

81235941144

Lagerstatus: 2
Pris: 1615kr
PowerParts|Cooling|Radiator fan
Radiator fan
Specifically suited to extreme conditions: for more air, better cooling and maximum power. Indispensable not only at the Erzberg or Romaniacs.
Specifically suited to extreme conditions: for more air, better cooling and maximum power. Indispensable not only at the Erzberg or Romaniacs. dölj mer info

SXS08250030

Lagerstatus: 3
Pris: 76kr
PowerParts|Engine|Engine parts, 4-stroke
Factory acceleration pump spring
Increases the output of the accelerator pump. Benefit: better responsiveness.
Increases the output of the accelerator pump. Benefit: better responsiveness. dölj mer info

59031017300

Lagerstatus: 1
Pris: 335kr
PowerParts|Engine|Engine parts, 4-stroke
Factory mixture control screw
Practical tool for regulating the mixture on the carburetor - without the need for any other tools.
Practical tool for regulating the mixture on the carburetor - without the need for any other tools. dölj mer info

SXS10450512

Lagerstatus: hos lev.
Pris: 6375kr
PowerParts|Exhaust systems|4-stroke Offroad
Akrapovi? "Slip-on Line"
This slip-on factory silencer has been developed in collaboration with Akrapovi? for the very specific requirements of enduring offroad use (for enduro, motocross and supermoto too) and very carefully tuned to the KTM characteristics.
The benefits:
  • Improved torque curve combined with very rideable peak performance
  • More sensitive throttle response and resulting improved traction
  • Durability suitable for extreme enduro use
  • Made from titanium - that means: ultra-light
  • Welded on brackets
  • Reinforced titanium end cap (factory team standard)
  • Pleasant deep sound
  • Tuned for compliance with the latest applicable noise regulations

With removable noise reduction insert.
Can only be fitted in combination with original header.

This slip-on factory silencer has been developed in collaboration with Akrapovi? for the very specific requirements of enduring offroad use (for enduro, motocross and supermoto too) and very carefully tuned to the KTM characteristics. <br />The benefits:<br /><ul><li class="li-square">Improved torque curve combined with very rideable peak performance</li><li class="li-square">More sensitive throttle response and resulting improved traction</li><li class="li-square">Durability suitable for extreme enduro use</li><li class="li-square">Made from titanium - that means: ultra-light</li><li class="li-square">Welded on brackets</li><li class="li-square">Reinforced titanium end cap (factory team standard)</li><li class="li-square">Pleasant deep sound</li><li class="li-square">Tuned for compliance with the latest applicable noise regulations</li></ul><p>With removable noise reduction insert.<br />Can only be fitted in combination with original header.</p> dölj mer info

78105981100

Lagerstatus: hos lev.
Pris: 6955kr
PowerParts|Exhaust systems|4-stroke Offroad
Akrapovi? "Slip-on Line"
This Akrapovi? silencer has been conceived especially for enduro riders who are looking for the best exhaust system available on the aftermarket and who know how optimum power development can best be achieved on the enduro course or in offroad use. The hexagonal silencer is a perfect match for the sharp lines of the KTM. With removable noise reduction insert. Installation only possible with original header. Can also be fitted in combination with factory headers on 350/400/450/500/530 EXC.
This Akrapovi? silencer has been conceived especially for enduro riders who are looking for the best exhaust system available on the aftermarket and who know how optimum power development can best be achieved on the enduro course or in offroad use. The hexagonal silencer is a perfect match for the sharp lines of the KTM. With removable noise reduction insert. Installation only possible with original header. Can also be fitted in combination with factory headers on 350/400/450/500/530 EXC. dölj mer info

SXS13450513

Lagerstatus: hos lev.
Pris: 5565kr
PowerParts|Exhaust systems|4-stroke Offroad
FMF Powercore 4 silencer
This FMF slip-on main silencer is made from the highest quality materials, and not only stands out from the standard silencer with its appearance, but has been optimally adapted in terms of torque and power to the power characteristic of the series engine. Installation only possible in combination with original manifold.
This FMF slip-on main silencer is made from the highest quality materials, and not only stands out from the standard silencer with its appearance, but has been optimally adapted in terms of torque and power to the power characteristic of the series engine. Installation only possible in combination with original manifold. dölj mer info

SXS07250535

Lagerstatus: hos lev.
Pris: 1135kr
PowerParts|Exhaust systems|Heat protection
Heat protection
Suitable for fitting to Akrapovi? header "Evolution Line" and original headers. Can only be fitted to headers without a soundbox.
Suitable for fitting to Akrapovi? header "Evolution Line" and original headers. Can only be fitted to headers without a soundbox. dölj mer info

54803095000

Lagerstatus: 3
Pris: 81kr
PowerParts|Footpegs
Foam rubber
For extremely muddy conditions.
For extremely muddy conditions. dölj mer info

78003940244

Lagerstatus: hos lev.
Pris: 2310kr
PowerParts|Footpegs
Pivot Pegz

Ingenious: Foot pegs that move with you when you shift your weight. Ideal for Motocross, Enduro and Supermoto.

The benefits:

  • Spring-mounted, 20-degree rotational movement possible towards front and rear
  • More control and grip in the corners thanks to the maneuverability
  • Large tread surface of 60 mm
  • Simpler and quicker weight shifting
  • Simpler gear changing and braking
  • Permanent contact between boot and foot peg: extends the service life of your boots!
<p>Ingenious: Foot pegs that move with you when you shift your weight. Ideal for Motocross, Enduro and Supermoto. </p><p>The benefits:</p><ul><li>Spring-mounted, 20-degree rotational movement possible towards front and rear</li><li>More control and grip in the corners thanks to the maneuverability</li><li>Large tread surface of 60 mm</li><li>Simpler and quicker weight shifting</li><li>Simpler gear changing and braking</li><li>Permanent contact between boot and foot peg: extends the service life of your boots!</li></ul> dölj mer info

U6951716

Lagerstatus: 6
Pris: 100kr
PowerParts|Handlebars/instruments/electrics|Grips
Grip donut set
Optimum protection against blisters on the thumbs with these coated neoprene rings. Simple to slide onto the grips.
Optimum protection against blisters on the thumbs with these coated neoprene rings. Simple to slide onto the grips. dölj mer info

78112964000

Lagerstatus: 11
Pris: 565kr
PowerParts|Handlebars/instruments/electrics|Grips
Grip heater
Ensures warm hands, even in bad weather. Can only be fitted by an authorized KTM dealer. We recommend use of auxiliary wiring harness 77711979000 for installation.
<div class="gs01l">Ensures warm hands, even in bad weather. Can only be fitted by an authorized KTM dealer. We recommend use of auxiliary wiring harness 77711979000 for installation.</div> dölj mer info

54802021100

Lagerstatus: 10
Pris: 155kr
PowerParts|Handlebars/instruments/electrics|Grips
Grip set
The special half-waffle grip has been developed to meet the demands and preferences of our factory riders, with the clear objectives: comfort AND safety - because no calluses on the palms and secure grip mean less stress when riding.
The benefits:
  • Ergonomic; contour matched to the shape of the hand for maximum comfort
  • Small "half waffle" ribs on the rear for secure grip
  • Made from two materials with different grades of hardness
  • Three areas for the metal safety wire
  • Grip hardness: medium
The special half-waffle grip has been developed to meet the demands and preferences of our factory riders, with the clear objectives: comfort AND safety - because no calluses on the palms and secure grip mean less stress when riding.<br />The benefits:<ul><li class="li-square">Ergonomic; contour matched to the shape of the hand for maximum comfort</li><li class="li-square">Small "half waffle" ribs on the rear for secure grip</li><li class="li-square">Made from two materials with different grades of hardness</li><li class="li-square">Three areas for the metal safety wire</li><li class="li-square">Grip hardness: medium</li></ul> dölj mer info

54802021000

Lagerstatus: 6
Pris: 155kr
PowerParts|Handlebars/instruments/electrics|Grips
Grip set
The special half-waffle grip has been developed to meet the demands and preferences of our factory riders, with the clear objectives: comfort AND safety - because no calluses on the palms and secure grip mean less stress when riding.
The benefits:
  • Ergonomic; contour matched to the shape of the hand for maximum comfort
  • Small "half waffle" ribs on the rear for secure grip
  • Made from two materials with different grades of hardness
  • Three areas for the metal safety wire
  • Grip hardness: soft
The special half-waffle grip has been developed to meet the demands and preferences of our factory riders, with the clear objectives: comfort AND safety - because no calluses on the palms and secure grip mean less stress when riding.<br />The benefits:<ul><li class="li-square">Ergonomic; contour matched to the shape of the hand for maximum comfort</li><li class="li-square">Small "half waffle" ribs on the rear for secure grip</li><li class="li-square">Made from two materials with different grades of hardness</li><li class="li-square">Three areas for the metal safety wire</li><li class="li-square">Grip hardness: soft</li></ul> dölj mer info

63002021200

Lagerstatus: 12
Pris: 255kr
PowerParts|Handlebars/instruments/electrics|Grips
Grip set
The KTM 2K (2K= 2 different materials) grip combines the durability of KTM standard grips and the comfort of the soft KTM grips.
  • Harder orange material on the inside and at the grip ends for a long service life
  • Softer black material on the outside, where the hand lies on the grip, for increased comfort
  • With open grip ends for closed handguards or bar ends
The KTM 2K (2K= 2 different materials) grip combines the durability of KTM standard grips and the comfort of the soft KTM grips.<ul><li class="li-disc">Harder orange material on the inside and at the grip ends for a long service life</li><li class="li-disc">Softer black material on the outside, where the hand lies on the grip, for increased comfort</li><li class="li-disc">With open grip ends for closed handguards or bar ends</li></ul> dölj mer info

63002021100

Lagerstatus: 10
Pris: 255kr
PowerParts|Handlebars/instruments/electrics|Grips
Grip set
The KTM 2K (2K= 2 different materials) grip combines the durability of KTM standard grips and the comfort of the soft KTM grips.
  • Harder orange material on the inside and at the grip ends for a long service life
  • Softer black material on the outside, where the hand lies on the grip, for increased comfort
The KTM 2K (2K= 2 different materials) grip combines the durability of KTM standard grips and the comfort of the soft KTM grips.<ul><li class="li-disc">Harder orange material on the inside and at the grip ends for a long service life</li><li class="li-disc">Softer black material on the outside, where the hand lies on the grip, for increased comfort</li></ul> dölj mer info

78102924000

Lagerstatus: 17
Pris: 335kr
PowerParts|Handlebars/instruments/electrics|Grips
Lock-on grip set
  • Grip replacement made easy
  • Right grip permanently glued to the throttle grip
  • Left grip with aluminum clamping ring for fixing on the handlebar
  • Inconvenient gluing and securing with wire no longer necessary
<ul><li class="li-square">Grip replacement made easy</li><li class="li-square">Right grip permanently glued to the throttle grip</li><li class="li-square">Left grip with aluminum clamping ring for fixing on the handlebar</li><li class="li-square">Inconvenient gluing and securing with wire no longer necessary</li></ul> dölj mer info

78102922000

Lagerstatus: 25
Pris: 160kr
PowerParts|Handlebars/instruments/electrics|Grips
Mud grips
The mud grips are simply pulled over existing grips and guarantee a secure hold on the grip rubber, even in extremely muddy conditions, thanks to their special material mix.
The mud grips are simply pulled over existing grips and guarantee a secure hold on the grip rubber, even in extremely muddy conditions, thanks to their special material mix. dölj mer info

78112916000

Lagerstatus: 3
Pris: 170kr
PowerParts|Handlebars/instruments/electrics|Grips
Supporting strap
  • High-strength nylon strap
  • Indispensable for use on extreme terrain
  • Attaches to fork tube
<ul><li class="li-square">High-strength nylon strap</li><li class="li-square">Indispensable for use on extreme terrain</li><li class="li-square">Attaches to fork tube</li></ul> dölj mer info

78712917000

Lagerstatus: 3
Pris: 255kr
PowerParts|Handlebars/instruments/electrics|Grips
Supporting strap
  • High-strength nylon strap
  • Indispensable for use on extreme terrain
  • Makes it easy to get your bike upright
  • Attaches to rear frame
<ul><li class="li-square">High-strength nylon strap</li><li class="li-square">Indispensable for use on extreme terrain</li><li class="li-square">Makes it easy to get your bike upright</li><li class="li-square">Attaches to rear frame</li></ul> dölj mer info

6030217900004

Lagerstatus: 2
Pris: 685kr
PowerParts|Handlebars/instruments/electrics|Hand guards
Handguard kit

This handguard set is not just visually impressive. Thanks to the special mix of materials, the handguard protects your hands and controls from damage without immediately breaking up. They also give you outstanding weather protection.

<p>This handguard set is not just visually impressive. Thanks to the special mix of materials, the handguard protects your hands and controls from damage without immediately breaking up. They also give you outstanding weather protection.</p> dölj mer info

6030217910028

Lagerstatus: 2
Pris: 685kr
PowerParts|Handlebars/instruments/electrics|Hand guards
Handguard kit

This handguard set is not just visually impressive. Thanks to the special mix of materials, the handguard protects your hands and controls from damage without immediately breaking up. They also give you outstanding weather protection.

<p>This handguard set is not just visually impressive. Thanks to the special mix of materials, the handguard protects your hands and controls from damage without immediately breaking up. They also give you outstanding weather protection.</p> dölj mer info

6030217910030

Lagerstatus: 2
Pris: 685kr
PowerParts|Handlebars/instruments/electrics|Hand guards
Handguard kit

This handguard set is not just visually impressive. Thanks to the special mix of materials, the handguard protects your hands and controls from damage without immediately breaking up. They also give you outstanding weather protection.

<p>This handguard set is not just visually impressive. Thanks to the special mix of materials, the handguard protects your hands and controls from damage without immediately breaking up. They also give you outstanding weather protection.</p> dölj mer info

7650297900028

Lagerstatus: hos lev.
Pris: 1150kr
PowerParts|Handlebars/instruments/electrics|Hand guards
Handguard kit

This handguard set has been specially developed for your motorcycle and is an essential accessory for heavy-duty offroad and Supermoto sessions. The broad, generous proportions, combined with the robust aluminum external frame ensure good mobility together with maximum protection in the event of a collision, stones thrown up from the road, branches etc.

<p>This handguard set has been specially developed for your motorcycle and is an essential accessory for heavy-duty offroad and Supermoto sessions. The broad, generous proportions, combined with the robust aluminum external frame ensure good mobility together with maximum protection in the event of a collision, stones thrown up from the road, branches etc.</p> dölj mer info

7800207920030

Lagerstatus: 5
Pris: 635kr
PowerParts|Handlebars/instruments/electrics|Hand guards
Handguard kit
These handguards developed especially for KTM bikes are an indispensable companion for serious offroad and supermoto use. The wide, spacious design ensures excellent mobility and maximum protection against impact, flying stones, branches, etc. Cannot be fitted with Twinwall handlebar.
These handguards developed especially for KTM bikes are an indispensable companion for serious offroad and supermoto use. The wide, spacious design ensures excellent mobility and maximum protection against impact, flying stones, branches, etc. Cannot be fitted with Twinwall handlebar. dölj mer info

7800207920028

Lagerstatus: 2
Pris: 635kr
PowerParts|Handlebars/instruments/electrics|Hand guards
Handguard kit
These handguards developed especially for KTM bikes are an indispensable companion for serious offroad and supermoto use. The wide, spacious design ensures excellent mobility and maximum protection against impact, flying stones, branches, etc. Cannot be fitted with Twinwall handlebar.
These handguards developed especially for KTM bikes are an indispensable companion for serious offroad and supermoto use. The wide, spacious design ensures excellent mobility and maximum protection against impact, flying stones, branches, etc. Cannot be fitted with Twinwall handlebar. dölj mer info

7800207910004

Lagerstatus: 2
Pris: 635kr
PowerParts|Handlebars/instruments/electrics|Hand guards
Handguard kit
The closed, two-component plastic handguards developed by KTM feature a black center section that offers maximum strength for optimum protection. The colorful upper and lower parts are highly flexible and endure even the roughest of treatment without complaint. Available in two different heights.
<div class="gs01l">The closed, two-component plastic handguards developed by KTM feature a black center section that offers maximum strength for optimum protection. The colorful upper and lower parts are highly flexible and endure even the roughest of treatment without complaint. Available in two different heights.</div> dölj mer info

60302179000EB

Lagerstatus: 1
Pris: 685kr
PowerParts|Handlebars/instruments/electrics|Hand guards
Handguard kit
This handguard set is not just visually impressive. Thanks to the special mix of materials, the handguard protects your hands and controls from damage without immediately breaking up. They also give you outstanding weather protection.
  • 78002079100EB is mounted standard on the 790 Adventure R
This handguard set is not just visually impressive. Thanks to the special mix of materials, the handguard protects your hands and controls from damage without immediately breaking up. They also give you outstanding weather protection.<ul><li class="li-square">78002079100EB is mounted standard on the 790 Adventure R<br /></li></ul> dölj mer info

78002079100EB

Lagerstatus: hos lev.
Pris: 635kr
PowerParts|Handlebars/instruments/electrics|Hand guards
Handguard kit
In the closed, two-component, plastic hand guards developed by KTM the black middle section provides maximum strength, ensuring optimum protection. The colored top and bottom parts are highly flexible and can tolerate the roughest handling. Available in two different heights.
In the closed, two-component, plastic hand guards developed by KTM the black middle section provides maximum strength, ensuring optimum protection. The colored top and bottom parts are highly flexible and can tolerate the roughest handling. Available in two different heights. dölj mer info

7650297910030

Lagerstatus: hos lev.
Pris: 1150kr
PowerParts|Handlebars/instruments/electrics|Hand guards
Handguard kit
This handguard set has been specially developed for your motorcycle and is an essential accessory for heavy-duty offroad and Supermoto sessions. The broad, generous proportions, combined with the robust aluminum external frame ensure good mobility together with maximum protection in the event of a collision, stones thrown up from the road, branches etc.
This handguard set has been specially developed for your motorcycle and is an essential accessory for heavy-duty offroad and Supermoto sessions. The broad, generous proportions, combined with the robust aluminum external frame ensure good mobility together with maximum protection in the event of a collision, stones thrown up from the road, branches etc. dölj mer info

79702979000EB

Lagerstatus: hos lev.
Pris: 1460kr
PowerParts|Handlebars/instruments/electrics|Hand guards
Handguard kit
This handguard set has been specially developed for your motorcycle and is an essential accessory for heavy-duty offroad and Supermoto sessions. The broad, generous proportions, combined with the robust aluminum external frame ensure good mobility together with maximum protection in the event of a collision, stones thrown up from the road, branches etc.
This handguard set has been specially developed for your motorcycle and is an essential accessory for heavy-duty offroad and Supermoto sessions. The broad, generous proportions, combined with the robust aluminum external frame ensure good mobility together with maximum protection in the event of a collision, stones thrown up from the road, branches etc. dölj mer info

79702979000AB

Lagerstatus: hos lev.
Pris: 1460kr
PowerParts|Handlebars/instruments/electrics|Hand guards
Handguard kit
This handguard set has been specially developed for your motorcycle and is an essential accessory for heavy-duty offroad and Supermoto sessions. The broad, generous proportions, combined with the robust aluminum external frame ensure good mobility together with maximum protection in the event of a collision, stones thrown up from the road, branches etc.
This handguard set has been specially developed for your motorcycle and is an essential accessory for heavy-duty offroad and Supermoto sessions. The broad, generous proportions, combined with the robust aluminum external frame ensure good mobility together with maximum protection in the event of a collision, stones thrown up from the road, branches etc. dölj mer info

76502979144

Lagerstatus: 12
Pris: 1030kr
PowerParts|Handlebars/instruments/electrics|Hand guards
Handguard kit
Extremely stable aluminum prevents broken levers if the bike should ever fall over.
Including fastening materials.
Extremely stable aluminum prevents broken levers if the bike should ever fall over.<br />Including fastening materials. dölj mer info

7770297900028

Lagerstatus: hos lev.
Pris: 520kr
PowerParts|Handlebars/instruments/electrics|Hand guards
Handguard kit
Thanks to splitting of the surfaces, these open, very light MX handguards ensure an uncompromising racing look. In two-component injection moulding technology:
  • Black mid-section = maximum strength for optimum protection
  • Coloured top and bottom parts = highly flexible, enduring even the roughest of treatment
Mounted directly on the handlebar with a plastic bracket.
Thanks to splitting of the surfaces, these open, very light MX handguards ensure an uncompromising racing look. In two-component injection moulding technology:<ul><li class="li-disc">Black mid-section = maximum strength for optimum protection</li><li class="li-disc">Coloured top and bottom parts = highly flexible, enduring even the roughest of treatment</li></ul>Mounted directly on the handlebar with a plastic bracket. dölj mer info

7770297900004

Lagerstatus: hos lev.
Pris: 520kr
PowerParts|Handlebars/instruments/electrics|Hand guards
Handguard kit
Thanks to splitting of the surfaces, these open, very light KTM MX handguards ensure an uncompromising racing look in the angular KTM design. In two-component injection moulding technology:
  • Black mid-section = maximum strength for optimum protection
  • Coloured top and bottom parts = highly flexible, enduring even the roughest of treatment
Mounted directly on the handlebar with a plastic bracket.
Thanks to splitting of the surfaces, these open, very light KTM MX handguards ensure an uncompromising racing look in the angular KTM design. In two-component injection moulding technology: <ul><li class="li-disc"> Black mid-section = maximum strength for optimum protection</li><li class="li-disc"> Coloured top and bottom parts = highly flexible, enduring even the roughest of treatment</li></ul>Mounted directly on the handlebar with a plastic bracket. dölj mer info

78102979044

Lagerstatus: 6
Pris: 150kr
PowerParts|Handlebars/instruments/electrics|Hand guards
Handguard kit
Thanks to splitting of the surfaces, these open, very light KTM MX handguards ensure an uncompromising racing look in the angular KTM design. In two-component injection moulding technology:
  • Black mid-section = maximum strength for optimum protection
  • Coloured top and bottom parts = highly flexible, enduring even the roughest of treatment
  • Attached directly at the levers with a special mounting.
Thanks to splitting of the surfaces, these open, very light KTM MX handguards ensure an uncompromising racing look in the angular KTM design. In two-component injection moulding technology: <ul><li class="li-disc"> Black mid-section = maximum strength for optimum protection</li><li class="li-disc"> Coloured top and bottom parts = highly flexible, enduring even the roughest of treatment</li><li class="li-disc">Attached directly at the levers with a special mounting.</li></ul> dölj mer info

7810297910028

Lagerstatus: hos lev.
Pris: 520kr
PowerParts|Handlebars/instruments/electrics|Hand guards
Handguard kit
Thanks to splitting of the surfaces, these open, very light KTM MX handguards ensure an uncompromising racing look in the angular KTM design. In two-component injection moulding technology:
  • Black mid-section = maximum strength for optimum protection
  • Coloured top and bottom parts = highly flexible, enduring even the roughest of treatment
  • Attached directly at the levers with a special mounting.
Thanks to splitting of the surfaces, these open, very light KTM MX handguards ensure an uncompromising racing look in the angular KTM design. In two-component injection moulding technology: <ul><li class="li-disc"> Black mid-section = maximum strength for optimum protection</li><li class="li-disc"> Coloured top and bottom parts = highly flexible, enduring even the roughest of treatment</li><li class="li-disc">Attached directly at the levers with a special mounting.</li></ul> dölj mer info

7700207900004

Lagerstatus: 2
Pris: 520kr
PowerParts|Handlebars/instruments/electrics|Hand guards
Handguard kit
Thanks to splitting of the surfaces, these open, very light KTM handguards ensure an uncompromising racing look in the angular KTM design. In two-component injection moulding technology:
  • Black mid-section = maximum strength for optimum protection
  • Orange top and bottom parts = highly flexible, enduring even the roughest of treatment
Thanks to splitting of the surfaces, these open, very light KTM handguards ensure an uncompromising racing look in the angular KTM design. In two-component injection moulding technology: <ul><li class="li-disc"> Black mid-section = maximum strength for optimum protection</li><li class="li-disc"> Orange top and bottom parts = highly flexible, enduring even the roughest of treatment</li></ul> dölj mer info

59501039144

Lagerstatus: 2
Pris: 1005kr
PowerParts|Handlebars/instruments/electrics|Handlebar supports
Factory handlebar support
Adjustable to 3 different heights: 28 mm, 37 mm, 46 mm. Available for handlebar diameters 22 mm and 28 mm.
Adjustable to 3 different heights: 28 mm, 37 mm, 46 mm. Available for handlebar diameters 22 mm and 28 mm. dölj mer info

59001039144

Lagerstatus: 1
Pris: 875kr
PowerParts|Handlebars/instruments/electrics|Handlebar supports
Handlebar mount kit
For conversion from 22 mm-diameter handlebars to handlebars with a diameter of 28 mm.
For conversion from 22 mm-diameter handlebars to handlebars with a diameter of 28 mm. dölj mer info

78901939244

Lagerstatus: 1
Pris: 565kr
PowerParts|Handlebars/instruments/electrics|Handlebar supports
Handlebar mount kit
Available in five different heights.
Included in the kit are 2x handlebar support lower parts and 2x fastening bolts.
The upper parts and bolts required for clamping the handlebar are taken from the original handlebar support.
Available in five different heights. <br />Included in the kit are 2x handlebar support lower parts and 2x fastening bolts.<br />The upper parts and bolts required for clamping the handlebar are taken from the original handlebar support. dölj mer info

77701939030

Lagerstatus: 1
Pris: 685kr
PowerParts|Handlebars/instruments/electrics|Handlebar supports
Handlebar riser
These CNC-machined, high-strength aluminum handlebar risers are extremely robust thanks to their special screw fastening (from below) on the triple clamp. Twisting and bending are therefore practically impossible. Use of these handlebar risers is only possible on CNC-machined triple clamps. Available in three different heights.
<div class="gs01l">These CNC-machined, high-strength aluminum handlebar risers are extremely robust thanks to their special screw fastening (from below) on the triple clamp. Twisting and bending are therefore practically impossible. Use of these handlebar risers is only possible on CNC-machined triple clamps. Available in three different heights.</div> dölj mer info

54801043020

Lagerstatus: 2
Pris: 335kr
PowerParts|Handlebars/instruments/electrics|Handlebar supports
Handlebar riser
Can only be fitted in combination with handlebar support 59001039100 (standard on EXC models up to MY 2011).
20 mm
Can only be fitted in combination with handlebar support 59001039100 (standard on EXC models up to MY 2011).<br />20 mm dölj mer info

54801043012

Lagerstatus: 2
Pris: 335kr
PowerParts|Handlebars/instruments/electrics|Handlebar supports
Handlebar riser
Can only be fitted in combination with handlebar support 59001039100 (standard on EXC models up to MY 2011).
12 mm
Can only be fitted in combination with handlebar support 59001039100 (standard on EXC models up to MY 2011).<br />12 mm dölj mer info

SXS07125200

Lagerstatus: 2
Pris: 2080kr
PowerParts|Handlebars/instruments/electrics|Handlebar supports
Progressive handlebar damping system (PHDS)
The CNC-machined handlebar mounting with cushioning rubber inserts relieves wrist and shoulder joints.
Further benefits of the PHDS:
  • Cushioning of heavy knocks
  • Absorption of vibration from chassis and engine
  • Additional handlebar damping in horizontal direction
  • Optimum steering precision
  • Handlebar height adjustable to 2 positions
  • Further damping elements available in three degrees of hardness (soft, medium, hard) for individual tuning
The CNC-machined handlebar mounting with cushioning rubber inserts relieves wrist and shoulder joints.<br />Further benefits of the PHDS:<ul><li class="li-disc">Cushioning of heavy knocks</li><li class="li-disc">Absorption of vibration from chassis and engine</li><li class="li-disc">Additional handlebar damping in horizontal direction</li><li class="li-disc">Optimum steering precision</li><li class="li-disc">Handlebar height adjustable to 2 positions</li><li class="li-disc">Further damping elements available in three degrees of hardness (soft, medium, hard) for individual tuning</li></ul> dölj mer info

5480200130004

Lagerstatus: 4
Pris: 1150kr
PowerParts|Handlebars/instruments/electrics|Handlebars
Handlebar
DO YOU KNOW that KTM handlebars must withstand very elaborate and specially developed test cycles before they come to market?
The facts:
  • All KTM handlebars are made from EN AW 7010 T6 aluminum
  • 28.5 mm diameter in the clamping area
  • 22.15 mm diameter in the lever area
  • Position markings for simple setting
  • Dimensions: A = 115 mm, B = 806 mm, C = 62 mm
DO YOU KNOW that KTM handlebars must withstand very elaborate and specially developed test cycles before they come to market?<br />The facts:<ul><li class="li-disc">All KTM handlebars are made from EN AW 7010 T6 aluminum</li><li class="li-disc">28.5 mm diameter in the clamping area</li><li class="li-disc">22.15 mm diameter in the lever area</li><li class="li-disc">Position markings for simple setting</li><li class="li-disc">Dimensions: A = 115 mm, B = 806 mm, C = 62 mm</li></ul> dölj mer info

25-9991-04

Lagerstatus: 2
Pris: 1695kr
PowerParts|Handlebars/instruments/electrics|Handlebars
Renthal Twinwall handlebar
The Renthal Twinwall 999, in KTM orange design, combines two handlebars in one: An exterior guarantees maximum strength against external damage (e.g. falling over) and is also anodized against corrosion. The interior, made of a special alloy, is also hard anodized to protect it from damage by the handlebar controls. Nylon inserts in the inner tube allow thinner walls. This saves weight and has a positive effect on the flexing properties. Rubber seals at the crossing points of the two tubes to prevent the ingress of water, dirt, cleaning agents, and other contaminants. Comes with handlebar padding.

Dimensions: A = 79 mm, B = 811 mm, C = 74 mm

The Renthal Twinwall 999, in KTM orange design, combines two handlebars in one: An exterior guarantees maximum strength against external damage (e.g. falling over) and is also anodized against corrosion. The interior, made of a special alloy, is also hard anodized to protect it from damage by the handlebar controls. Nylon inserts in the inner tube allow thinner walls. This saves weight and has a positive effect on the flexing properties. Rubber seals at the crossing points of the two tubes to prevent the ingress of water, dirt, cleaning agents, and other contaminants. Comes with handlebar padding.<p>Dimensions: A = 79 mm, B = 811 mm, C = 74 mm</p> dölj mer info

7950290100004

Lagerstatus: hos lev.
Pris: 1740kr
PowerParts|Handlebars/instruments/electrics|Handlebars
Renthal Twinwall handlebar
The Renthal winwall 996, in KTM orange design, combines two handlebars in one: An exterior guarantees maximum strength against external damage (e.g. falling over) and is also anodized against corrosion. The interior, made of a special alloy, is also hard anodized to protect it from damage by the handlebar controls. Nylon inserts in the inner tube allow thinner walls. This saves weight and has a positive effect on the flexing properties. Rubber seals at the crossing points of the two tubes to prevent the ingress of water, dirt, cleaning agents, and other contaminants. Comes with handlebar padding.

Dimensions: A = 118 mm, B = 811 mm, C = 74 mm

The Renthal winwall 996, in KTM orange design, combines two handlebars in one: An exterior guarantees maximum strength against external damage (e.g. falling over) and is also anodized against corrosion. The interior, made of a special alloy, is also hard anodized to protect it from damage by the handlebar controls. Nylon inserts in the inner tube allow thinner walls. This saves weight and has a positive effect on the flexing properties. Rubber seals at the crossing points of the two tubes to prevent the ingress of water, dirt, cleaning agents, and other contaminants. Comes with handlebar padding.<p>Dimensions: A = 118 mm, B = 811 mm, C = 74 mm</p> dölj mer info

77711979000

Lagerstatus: 1
Pris: 170kr
PowerParts|Handlebars/instruments/electrics|Instruments/electrics
Auxiliary wiring harness

We recommend using this additional wiring harness for all power consumers. Furthermore you have with the option of installing power consumers such as grip heating or a fan on your SX or XC with this wiring harness. Warning: The power consumer is now connected directly to the battery. If it is not turned off, the battery is therefore also drained when the engine is switched off. Optionally available: Y-distributor 777.11.979.010 or 777.11.979.044.

<p>We recommend using this additional wiring harness for all power consumers. Furthermore you have with the option of installing power consumers such as grip heating or a fan on your SX or XC with this wiring harness. Warning: The power consumer is now connected directly to the battery. If it is not turned off, the battery is therefore also drained when the engine is switched off. Optionally available: Y-distributor 777.11.979.010 or 777.11.979.044.</p> dölj mer info

77711979010

Lagerstatus: 3
Pris: 92kr
PowerParts|Handlebars/instruments/electrics|Instruments/electrics
Auxiliary wiring harness
The Y-distributor allows you to connect two power consumers to auxiliary wiring harness 77711979000.
<div class="gs01l">The Y-distributor allows you to connect two power consumers to auxiliary wiring harness 77711979000.</div> dölj mer info

77711979044

Lagerstatus: 1
Pris: 290kr
PowerParts|Handlebars/instruments/electrics|Instruments/electrics
Auxiliary wiring harness
The Y-distributor allows you to connect two power consumers to auxiliary wiring harness 77711979000. The connected power consumer can be switched off with the integrated switch. This prevents the battery from being drained unnecessarily.
<div class="gs01l">The Y-distributor allows you to connect two power consumers to auxiliary wiring harness 77711979000. The connected power consumer can be switched off with the integrated switch. This prevents the battery from being drained unnecessarily.</div> dölj mer info

78112920000

Lagerstatus: 2
Pris: 755kr
PowerParts|Handlebars/instruments/electrics|Instruments/electrics
Hourmeter
Know exactly when the next service is due.
Know exactly when the next service is due. dölj mer info

78112920044

Lagerstatus: 2
Pris: 150kr
PowerParts|Handlebars/instruments/electrics|Instruments/electrics
Hourmeter bracket
To assemble the hourmeter 78112920000 on the triple clamp.
To assemble the hourmeter 78112920000 on the triple clamp. dölj mer info

7801490120030

Lagerstatus: hos lev.
Pris: 5585kr
PowerParts|Handlebars/instruments/electrics|Instruments/electrics
X2 headlight
The revolution in lighting technology: This lightweight, ultra-bright headlight turns night into day. Ideal for all 24-hour racers. Fitted in a matter of seconds. Matching orange start number sticker 7800890700004 available. A stator kit needs to be fitted for use on some KTM models (see stator kit info).
The revolution in lighting technology: This lightweight, ultra-bright headlight turns night into day. Ideal for all 24-hour racers. Fitted in a matter of seconds. Matching orange start number sticker 7800890700004 available. A stator kit needs to be fitted for use on some KTM models (see stator kit info). dölj mer info

7801390200004

Lagerstatus: 3
Pris: 255kr
PowerParts|Handlebars/instruments/electrics|Levers
Brake lever
DO YOU KNOW about the benefits of forged brake and clutch levers from KTM PowerParts?
  • Manufactured from high-strength aluminum, forged and then CNC-machined
  • This extensive production process guarantees a long service life, maximum flexibility and a precise fit
  • Ergonomically perfected shape (the result of years of racing experience)
  • Predefined breaking point
  • Orange anodized
Suitable for all hydraulic Brembo® brake systems.
DO YOU KNOW about the benefits of forged brake and clutch levers from KTM PowerParts?<ul><li class="li-disc"> Manufactured from high-strength aluminum, forged and then CNC-machined </li><li class="li-disc"> This extensive production process guarantees a long service life, maximum flexibility and a precise fit</li><li class="li-disc"> Ergonomically perfected shape (the result of years of racing experience)</li><li class="li-disc"> Predefined breaking point</li><li class="li-disc"> Orange anodized</li></ul>Suitable for all hydraulic Brembo® brake systems. dölj mer info

7800293120004

Lagerstatus: 4
Pris: 255kr
PowerParts|Handlebars/instruments/electrics|Levers
Clutch lever
DO YOU KNOW about the benefits of forged brake and clutch levers from KTM PowerParts?
  • Manufactured from high-strength aluminum, forged and then CNC-machined
  • This extensive production process guarantees a long service life, maximum flexibility and a precise fit
  • Ergonomically perfected shape (the result of years of racing experience)
  • Predefined breaking point
  • Orange anodized
Suitable for all hydraulic Brembo® clutch mountings.
DO YOU KNOW about the benefits of forged brake and clutch levers from KTM PowerParts?<ul><li class="li-disc"> Manufactured from high-strength aluminum, forged and then CNC-machined </li><li class="li-disc"> This extensive production process guarantees a long service life, maximum flexibility and a precise fit</li><li class="li-disc"> Ergonomically perfected shape (the result of years of racing experience)</li><li class="li-disc"> Predefined breaking point</li><li class="li-disc"> Orange anodized</li></ul>Suitable for all hydraulic Brembo® clutch mountings. dölj mer info

78013802000

Lagerstatus: 1
Pris: 1155kr
PowerParts|Handlebars/instruments/electrics|Levers
Flex brake lever
Ever had to give up during the race because of a broken clutch or brake lever? That will never happen again - these levers are designed to fold away on contact with the ground.
Suitable for all hydraulic Brembo® brake systems.
Ever had to give up during the race because of a broken clutch or brake lever? That will never happen again - these levers are designed to fold away on contact with the ground.<br />Suitable for all hydraulic Brembo® brake systems. dölj mer info

7801380220004

Lagerstatus: 2
Pris: 1030kr
PowerParts|Handlebars/instruments/electrics|Levers
Flex brake lever
Ever had to give up during the race because of a broken clutch or brake lever? That will never happen again - these levers are designed to fold away on contact with the ground.
Suitable for all hydraulic Brembo® brake systems.
Ever had to give up during the race because of a broken clutch or brake lever? That will never happen again - these levers are designed to fold away on contact with the ground.<br />Suitable for all hydraulic Brembo® brake systems. dölj mer info

7870293104404

Lagerstatus: 2
Pris: 1150kr
PowerParts|Handlebars/instruments/electrics|Levers
Flex clutch lever
Ever had to give up during the race because of a broken clutch or brake lever? That will never happen again - these levers are designed to fold away on contact with the ground.
Suitable for all hydraulic Brembo® clutch fittings.
Ever had to give up during the race because of a broken clutch or brake lever? That will never happen again - these levers are designed to fold away on contact with the ground.<br />Suitable for all hydraulic Brembo® clutch fittings. dölj mer info

77702944000

Lagerstatus: 7
Pris: 185kr
PowerParts|Handlebars/instruments/electrics|Special parts
Clamp
  • Including plastic insert
  • The brake or clutch armature rotates in case of a fall
  • Reduces the risk of a lever being broken
  • Suitable for all Brembo® and Formula brake and clutch assembles
<ul><li class="li-square">Including plastic insert</li><li class="li-square">The brake or clutch armature rotates in case of a fall</li><li class="li-square">Reduces the risk of a lever being broken</li><li class="li-square">Suitable for all Brembo® and Formula brake and clutch assembles</li></ul> dölj mer info

54802005000

Lagerstatus: 5
Pris: 170kr
PowerParts|Handlebars/instruments/electrics|Special parts
Handlebar ends
Protects rubber grips from grazing in the event of a fall.
Protects rubber grips from grazing in the event of a fall. dölj mer info

79002901050

Lagerstatus: 5
Pris: 405kr
PowerParts|Handlebars/instruments/electrics|Special parts
Handlebar pad

Provides optimum protection. With the integrated card holder you always have the time in view. A small extra pocket allows you to stow small items. Can also be fitted in combination with the PHDS-handlebar support.

<p>Provides optimum protection. With the integrated card holder you always have the time in view. A small extra pocket allows you to stow small items. Can also be fitted in combination with the PHDS-handlebar support.</p> dölj mer info

SXS07250800

Lagerstatus: 10
Pris: 290kr
PowerParts|Handlebars/instruments/electrics|Special parts
Handlebar pad
Provides optimum protection. Already a must at many events.
Provides optimum protection. Already a must at many events. dölj mer info

5021204000030

Lagerstatus: 2
Pris: 255kr
PowerParts|Handlebars/instruments/electrics|Special parts
Mirror
Left-hand version, light and robust.
<div class="gs01l">Left-hand version, light and robust.</div> dölj mer info

78102994100

Lagerstatus: 3
Pris: 310kr
PowerParts|Handlebars/instruments/electrics|Special parts
Throttle cable protection
  • Prevents snapping of throttle cable wire
  • Simple to fit
  • Made of aluminum
<ul><li>Prevents snapping of throttle cable wire</li><li>Simple to fit</li><li>Made of aluminum</li></ul> dölj mer info

77012005000

Lagerstatus: hos lev.
Pris: 5215kr
PowerParts|Handlebars/instruments/electrics|Steering damper
Factory steering damper
Greater safety and stability at the front forks under speed. This extremely light and fully adjustable KTM steering damper offers a top performance for the price. The sophisticated damper mounting allows individual steering adjustment even after installation. Very low design profile.

00050000929 handle bar support kit required for use on MY16 and on XC from MY16.

Greater safety and stability at the front forks under speed. This extremely light and fully adjustable KTM steering damper offers a top performance for the price. The sophisticated damper mounting allows individual steering adjustment even after installation. Very low design profile.<p>00050000929 handle bar support kit required for use on MY16 and on XC from MY16.</p> dölj mer info

77012005544

Lagerstatus: hos lev.
Pris: 755kr
PowerParts|Handlebars/instruments/electrics|Steering damper
Factory steering damper bracket
When used with SX models from model year 16, the post mount 77212905444 must be installed.
When used with SX models from model year 16, the post mount 77212905444 must be installed. dölj mer info

77012005644

Lagerstatus: 2
Pris: 490kr
PowerParts|Handlebars/instruments/electrics|Steering damper
PHDS bracket for Factory steering damper
This bracket is required for fitting the progressive handlebar damping system (PHDS) SXS.07125200 in conjunction with factory steering damper 77012005000 or steering damper 58512050100, whereby the latter is only permissible if steering damper bracket 58512050144 or 58512050544 is used.
This bracket is required for fitting the progressive handlebar damping system (PHDS) SXS.07125200 in conjunction with factory steering damper 77012005000 or steering damper 58512050100, whereby the latter is only permissible if steering damper bracket 58512050144 or 58512050544 is used. dölj mer info

58512050100

Lagerstatus: hos lev.
Pris: 6955kr
PowerParts|Handlebars/instruments/electrics|Steering damper
Steering damper
Have you ever had the handlebars ripped out of your hands? This high-end steering damper provides maximum control on fast tracks and a significant increase in safety!
Further advantages
  • Extremely low weight
  • Sensitive feedback behavior
  • High speed setting
  • Optimum 25 click setting range

Proven success with the KTM Works Rally Team. Fits all SX and EXC models.

Have you ever had the handlebars ripped out of your hands? This high-end steering damper provides maximum control on fast tracks and a significant increase in safety!<br />Further advantages<ul><li>Extremely low weight</li><li>Sensitive feedback behavior</li><li>High speed setting</li><li>Optimum 25 click setting range</li></ul><p>Proven success with the KTM Works Rally Team. Fits all SX and EXC models.</p> dölj mer info

58512050544

Lagerstatus: hos lev.
Pris: 755kr
PowerParts|Handlebars/instruments/electrics|Steering damper
Steering damper bracket
When used with SX models from model year 16, the post mount 77212905444 must be installed.
When used with SX models from model year 16, the post mount 77212905444 must be installed. dölj mer info

58512050044

Lagerstatus: 2
Pris: 755kr
PowerParts|Handlebars/instruments/electrics|Steering damper
Steering damper bracket
dölj mer info

77012005044

Lagerstatus: 1
Pris: 755kr
PowerParts|Handlebars/instruments/electrics|Steering damper
Steering damper bracket
dölj mer info

77212905444

Lagerstatus: hos lev.
Pris: 1845kr
PowerParts|Handlebars/instruments/electrics|Steering damper
Steering damper counter bearing
dölj mer info

00062030051

Lagerstatus: 16
Pris: 115kr
PowerParts|Lubricants/auxiliary materials
Grip glue
Perfect hold for your grips. Contents: 20 g.
Perfect hold for your grips. Contents: 20 g. dölj mer info

00062030058

Lagerstatus: 5
Pris: 86kr
PowerParts|Lubricants/auxiliary materials
Repair kit
The repair kit is a two-component epoxy resin adhesive. Hardens at room temperature: accelerated hardening possible by raising the temperature.
Use: Particularly suitable for steel, but also other metals, wood, concrete, ceramics, glass and most plastics. The steel bond is resistant to, among other things, oil, gasoline, diesel and battery acid.
Processing: Best results are achieved with clean and rough surfaces. Cut off the required amount and knead for approx. 1 minute until a uniform color is achieved. Use within 2 minutes.
At first, it seems as if there is no adhesion. Just carry on and press the adhesive mixture into the surface. Remove any excess material. When coating or repairing surfaces that are still wet, leak or are under water, apply pressure until adhesion begins. Smooth flat with water by hand for an even surface. Wash your hands with soap and water (or with a Turbo cleaning towelette) immediately after completing your work. Hardening commences after 5 to 10 minutes. The repaired part can be used again after as little as 60 minutes. The surfaces to be glued must be dry and free from dust and grease. Contents: 56 g.
The repair kit is a two-component epoxy resin adhesive. Hardens at room temperature: accelerated hardening possible by raising the temperature. <br />Use: Particularly suitable for steel, but also other metals, wood, concrete, ceramics, glass and most plastics. The steel bond is resistant to, among other things, oil, gasoline, diesel and battery acid. <br />Processing: Best results are achieved with clean and rough surfaces. Cut off the required amount and knead for approx. 1 minute until a uniform color is achieved. Use within 2 minutes.<br />At first, it seems as if there is no adhesion. Just carry on and press the adhesive mixture into the surface. Remove any excess material. When coating or repairing surfaces that are still wet, leak or are under water, apply pressure until adhesion begins. Smooth flat with water by hand for an even surface. Wash your hands with soap and water (or with a Turbo cleaning towelette) immediately after completing your work. Hardening commences after 5 to 10 minutes. The repaired part can be used again after as little as 60 minutes. The surfaces to be glued must be dry and free from dust and grease. Contents: 56 g. dölj mer info

38-2920

Lagerstatus: 18
Pris: 125kr
PowerParts|Lubricants/auxiliary materials
Thread lock

Medium-strength thread lock. Suitable for all metal thread connections.

<p> Medium-strength thread lock. Suitable for all metal thread connections.<br /></p> dölj mer info

00062030050

Lagerstatus: 7
Pris: 375kr
PowerParts|Lubricants/auxiliary materials
Thread lock

Medium strength thread lock - contents, 50 ml.

  • Temperature resistant from -55 to +200 °C 
  • Fills gaps up to 0.25 mm
  • Final strength achieved after 1 to 3 hours
<p>Medium strength thread lock - contents, 50 ml.</p><ul><li>Temperature resistant from -55 to +200 °C </li><li>Fills gaps up to 0.25 mm</li><li>Final strength achieved after 1 to 3 hours<br /></li></ul> dölj mer info

76512924000

Lagerstatus: 2
Pris: 170kr
PowerParts|Luggage
Inner bag
Keep your belongings dry and safe from dust with this handy and water resistant bag which can be placed inside the motorcycle luggage.
  • Waterproof resistant coating
  • Waterproof roll closure
Keep your belongings dry and safe from dust with this handy and water resistant bag which can be placed inside the motorcycle luggage.<ul><li class="li-square">Waterproof resistant coating</li><li class="li-square">Waterproof roll closure</li></ul> dölj mer info

78112978100

Lagerstatus: 2
Pris: 915kr
PowerParts|Luggage
Luggage bag
The robust, waterproof bag can be fitted simply and without additional installation materials. The volume of the bag is approx. 5 l. For use on Freeride models, rear rack 72012927044 is required.
<div class="gs01l">The robust, waterproof bag can be fitted simply and without additional installation materials. The volume of the bag is approx. 5 l. For use on Freeride models, rear rack 72012927044 is required.</div> dölj mer info

78112978200

Lagerstatus: hos lev.
Pris: 915kr
PowerParts|Luggage
Luggage bag
The robust, waterproof bag can be fitted simply and without additional installation materials. The volume of the bag is approx. 5 l. For use on Freeride models, rear rack 72012927044 is required.
<div class="gs01l">The robust, waterproof bag can be fitted simply and without additional installation materials. The volume of the bag is approx. 5 l. For use on Freeride models, rear rack 72012927044 is required.</div> dölj mer info

62002903150

Lagerstatus: hos lev.
Pris: 230kr
PowerParts|Navigation
GPS bag
Keeps documents, maps, navigation and communication equipment (e.g., cellphone) dry and protected against vibration in your field of vision.
  • Suitable for all KTM GPS holders
  • Size: 170 x 130 x 35 mm
Keeps documents, maps, navigation and communication equipment (e.g., cellphone) dry and protected against vibration in your field of vision.<ul><li class="li-disc">Suitable for all KTM GPS holders</li><li class="li-disc">Size: 170 x 130 x 35 mm</li></ul> dölj mer info

93002903100

Lagerstatus: 2
Pris: 695kr
PowerParts|Navigation
GPS bracket

Only for use on original handlebar mounting.

<p>Only for use on original handlebar mounting.</p> dölj mer info

62012092044

Lagerstatus: hos lev.
Pris: 815kr
PowerParts|Navigation
GPS bracket
Universally applicable option for mounting the GPS bracket. Also for use with other models.
Universally applicable option for mounting the GPS bracket. Also for use with other models. dölj mer info

60112092070

Lagerstatus: 2
Pris: 335kr
PowerParts|Navigation
Handlebar cross brace
Universally applicable for mounting the GPS bracket.
Universally applicable for mounting the GPS bracket. dölj mer info

61712991100

Lagerstatus: hos lev.
Pris: 810kr
PowerParts|Navigation
Smartphone bracket
  • Universal and discreet mounting solution for your smartphone
  • Counterpart for the smartphone cases.
  • The smartphone can be easily mounted on the motorcycle by turning it 90°.
  • Can be clamped on the handlebar (including different adaptor)
  • The arm can be rotated in any position for the perfect position for your smartphone.
<ul><li class="li-square">Universal and discreet mounting solution for your smartphone</li><li class="li-square">Counterpart for the smartphone cases.</li><li class="li-square">The smartphone can be easily mounted on the motorcycle by turning it 90°.</li><li class="li-square">Can be clamped on the handlebar (including different adaptor)</li><li class="li-square">The arm can be rotated in any position for the perfect position for your smartphone.</li></ul> dölj mer info

61712991400

Lagerstatus: 1
Pris: 460kr
PowerParts|Navigation
Smartphone case HUAWEI Mate 20 Pro
  • Protects your expensive smartphone and still keeping a slim design
  • Integrated counterpart for the smartphone bracket
  • The smartphone can be easily mounted on the motorcycle by turning it 90°
<ul><li class="li-square">Protects your expensive smartphone and still keeping a slim design</li><li class="li-square">Integrated counterpart for the smartphone bracket</li><li class="li-square">The smartphone can be easily mounted on the motorcycle by turning it 90°</li></ul> dölj mer info

61712990100

Lagerstatus: 1
Pris: 460kr
PowerParts|Navigation
Smartphone case iPhone 6/6S/7/8
  • Unobtrusive protection for your expensive smartphone
  • Integrated counterpart for the smartphone bracket
  • The smartphone can easily be mounted on the bracket by turning it 90°.
<ul><li>Unobtrusive protection for your expensive smartphone</li><li>Integrated counterpart for the smartphone bracket</li><li>The smartphone can easily be mounted on the bracket by turning it 90°.</li></ul> dölj mer info

61712990000

Lagerstatus: 2
Pris: 460kr
PowerParts|Navigation
Smartphone case iPhone 6/6S/7/8 PLUS
  • Unobtrusive protection for your expensive smartphone
  • Integrated counterpart for the smartphone bracket
  • The smartphone can easily be mounted on the bracket by turning it 90°.
<ul><li>Unobtrusive protection for your expensive smartphone</li><li>Integrated counterpart for the smartphone bracket</li><li>The smartphone can easily be mounted on the bracket by turning it 90°.</li></ul> dölj mer info

61712990200

Lagerstatus: 1
Pris: 460kr
PowerParts|Navigation
Smartphone case iPhone X/XS
  • Unobtrusive protection for your expensive smartphone
  • Integrated counterpart for the smartphone bracket
  • The smartphone can easily be mounted on the bracket by turning it 90°.
<ul><li>Unobtrusive protection for your expensive smartphone</li><li>Integrated counterpart for the smartphone bracket</li><li>The smartphone can easily be mounted on the bracket by turning it 90°.</li></ul> dölj mer info

61712991300

Lagerstatus: 1
Pris: 460kr
PowerParts|Navigation
Smartphone case iPhone XR
  • Protects your expensive smartphone and still keeping a slim design
  • Integrated counterpart for the smartphone bracket
  • The smartphone can be easily mounted on the motorcycle by turning it 90°
<ul><li class="li-square">Protects your expensive smartphone and still keeping a slim design</li><li class="li-square">Integrated counterpart for the smartphone bracket</li><li class="li-square">The smartphone can be easily mounted on the motorcycle by turning it 90°</li></ul> dölj mer info

61712991200

Lagerstatus: hos lev.
Pris: 460kr
PowerParts|Navigation
Smartphone case iPhone XS Max
  • Protects your expensive smartphone and still keeping a slim design
  • Integrated counterpart for the smartphone bracket
  • The smartphone can be easily mounted on the motorcycle by turning it 90°
<ul><li class="li-square">Protects your expensive smartphone and still keeping a slim design</li><li class="li-square">Integrated counterpart for the smartphone bracket</li><li class="li-square">The smartphone can be easily mounted on the motorcycle by turning it 90°</li></ul> dölj mer info

61712990400

Lagerstatus: 1
Pris: 460kr
PowerParts|Navigation
Smartphone case Samsung Galaxy S8+/S9+
  • Unobtrusive protection for your expensive smartphone
  • Integrated counterpart for the smartphone bracket
  • The smartphone can easily be mounted on the bracket by turning it 90°.
<ul><li>Unobtrusive protection for your expensive smartphone</li><li>Integrated counterpart for the smartphone bracket</li><li>The smartphone can easily be mounted on the bracket by turning it 90°.</li></ul> dölj mer info

61712990300

Lagerstatus: 1
Pris: 460kr
PowerParts|Navigation
Smartphone case Samsung Galaxy S8/S9
  • Unobtrusive protection for your expensive smartphone
  • Integrated counterpart for the smartphone bracket
  • The smartphone can easily be mounted on the bracket by turning it 90°.
<ul><li>Unobtrusive protection for your expensive smartphone</li><li>Integrated counterpart for the smartphone bracket</li><li>The smartphone can easily be mounted on the bracket by turning it 90°.</li></ul> dölj mer info

61712991000

Lagerstatus: 3
Pris: 230kr
PowerParts|Navigation
Smartphone universal adapter
  • Can be stuck on any flat surface (rear side of smartphone, or smartphone case)
  • Integrated counterpart for the smartphone bracket
  • The smartphone can be easily mounted on the motorcycle by turning it 90°
  • Dimensions: 66x55mm (2.6x2.17 inch)
<ul><li class="li-square">Can be stuck on any flat surface (rear side of smartphone, or smartphone case)</li><li class="li-square">Integrated counterpart for the smartphone bracket</li><li class="li-square">The smartphone can be easily mounted on the motorcycle by turning it 90°</li><li class="li-square">Dimensions: 66x55mm (2.6x2.17 inch)</li></ul> dölj mer info

78109945000

Lagerstatus: 1
Pris: 450kr
PowerParts|Protection|Chassis Offroad
Crash bung
Protects the fork from damage in the event of a crash. Suitable for all models with 26 mm front axle.
Protects the fork from damage in the event of a crash. Suitable for all models with 26 mm front axle. dölj mer info

78110945100

Lagerstatus: 1
Pris: 450kr
PowerParts|Protection|Chassis Offroad
Crash bung
Protects the swingarm in the event of a crash.
Protects the swingarm in the event of a crash. dölj mer info

54803047000

Lagerstatus: 7
Pris: 255kr
PowerParts|Protection|Chassis Offroad
Footpeg slider kit
Glass fiber reinforced plastic. Protects the footrests from damage during a potential camber. Mountable on all motorcycles with footrests 59003041250 / 78003041050 right and 59003040250 / 78003040050 left.
Glass fiber reinforced plastic. Protects the footrests from damage during a potential camber. Mountable on all motorcycles with footrests 59003041250 / 78003041050 right and 59003040250 / 78003040050 left. dölj mer info

78001095000

Lagerstatus: 6
Pris: 335kr
PowerParts|Protection|Chassis Offroad
Fork protector
  • Made from neoprene
  • Ideal protection for sealing the fork
  • For use with the closed fork protector
  • For fork tube with a diameter of 48 mm
<ul><li class="li-square">Made from neoprene</li><li class="li-square">Ideal protection for sealing the fork</li><li class="li-square">For use with the closed fork protector</li><li class="li-square">For fork tube with a diameter of 48 mm</li></ul> dölj mer info

59501095000

Lagerstatus: 2
Pris: 335kr
PowerParts|Protection|Chassis Offroad
Fork protector
  • Made from neoprene
  • Ideal protection for sealing the fork
  • For use with the open fork protector
  • For fork tube with a diameter of 48 mm
<ul><li class="li-square">Made from neoprene</li><li class="li-square">Ideal protection for sealing the fork</li><li class="li-square">For use with the open fork protector</li><li class="li-square">For fork tube with a diameter of 48 mm</li></ul> dölj mer info

77303094100

Lagerstatus: 3
Pris: 335kr
PowerParts|Protection|Chassis Offroad
Frame protection set
Reliably prevents damage to the powder coating by dirt, crashes or the rider's boots. Also protects trousers and boots from burns on the exhaust side.
Reliably prevents damage to the powder coating by dirt, crashes or the rider's boots. Also protects trousers and boots from burns on the exhaust side. dölj mer info

7730309410004

Lagerstatus: 2
Pris: 335kr
PowerParts|Protection|Chassis Offroad
Frame protection set
Reliably prevents damage to the powder coating by dirt, crashes or the rider's boots. Also protects trousers and boots from burns on the exhaust side.
Reliably prevents damage to the powder coating by dirt, crashes or the rider's boots. Also protects trousers and boots from burns on the exhaust side. dölj mer info

77008998000

Lagerstatus: 4
Pris: 230kr
PowerParts|Protection|Chassis Offroad
Fuel tank protection sticker set
dölj mer info

59504090050

Lagerstatus: 7
Pris: 195kr
PowerParts|Protection|Chassis Offroad
PDS protection
  • Made from neoprene
  • Protect the lower PDS bearing against ingress of dirt
  • Extends the service life of the lower PDS bearing
<ul><li class="li-square">Made from neoprene</li><li class="li-square">Protect the lower PDS bearing against ingress of dirt</li><li class="li-square">Extends the service life of the lower PDS bearing</li></ul> dölj mer info

52000092

Lagerstatus: 6
Pris: 310kr
PowerParts|Protection|Chassis Offroad
Protective fork sticker set
Extra thick film; protects the outer tubes against stone impact
For all 48 mm forks
Extra thick film; protects the outer tubes against stone impact<br />For all 48 mm forks dölj mer info

52000093

Lagerstatus: 3
Pris: 310kr
PowerParts|Protection|Chassis Offroad
Protective fork sticker set
Extra thick film; protects the outer tubes against stone impact
For all 48 mm forks
Extra thick film; protects the outer tubes against stone impact<br />For all 48 mm forks dölj mer info

59003990250

Lagerstatus: 2
Pris: 100kr
PowerParts|Protection|Engine guard, 2-stroke Offroad
Foam rubber
When positioned between engine and skid plate, less dirt can accumulate, hence allowing better cooling of the engine.
When positioned between engine and skid plate, less dirt can accumulate, hence allowing better cooling of the engine. dölj mer info

78032075044

Lagerstatus: hos lev.
Pris: 635kr
PowerParts|Protection|Engine guard, 4-stroke Offroad
Clutch slave cylinder protection
DO YOU KNOW about the benefits of the KTM case guard?
  • Prevents damage to the engine case in the event of the chain breaking
  • No pulling-in of stones between chain and engine case (material-friendly)
  • CNC-machined from high-strength aluminum
  • Best possible and effective protection for the clutch slave cylinder
DO YOU KNOW about the benefits of the KTM case guard?<ul><li class="li-disc"> Prevents damage to the engine case in the event of the chain breaking</li><li class="li-disc"> No pulling-in of stones between chain and engine case (material-friendly)</li><li class="li-disc"> CNC-machined from high-strength aluminum</li><li class="li-disc"> Best possible and effective protection for the clutch slave cylinder</li></ul> dölj mer info

78003090000

Lagerstatus: 2
Pris: 1570kr
PowerParts|Protection|Engine guard, 4-stroke Offroad
Skid Plate
An offroad sortie is no walk in the park! KTM aluminum skid plates provide the most effective protection for frame and engine:
  • Made from 4mm-thick, high-strength, robust aluminum
  • Extremely hard-wearing and endurance-tested for the toughest offroad use
  • Precisely fitting design - specially developed for KTM models
  • Highest quality workmanship
  • Quick and simple installation
An offroad sortie is no walk in the park! KTM aluminum skid plates provide the most effective protection for frame and engine:<ul><li class="li-disc"> Made from 4mm-thick, high-strength, robust aluminum</li><li class="li-disc"> Extremely hard-wearing and endurance-tested for the toughest offroad use</li><li class="li-disc"> Precisely fitting design - specially developed for KTM models</li><li class="li-disc"> Highest quality workmanship</li><li class="li-disc"> Quick and simple installation</li></ul> dölj mer info

78003190100

Lagerstatus: hos lev.
Pris: 1245kr
PowerParts|Protection|Engine guard, 4-stroke Offroad
Skid plate
Never without one! KTM plastic skid plates combine many special qualities:
  • Manufactured using state-of-the-art plastic injection moulding technology
  • Made from special high-strength plastic
  • Revised, extremely tough fastening system
  • Developed for use in the toughest offroad terrain
  • Maximum protection at minimum possible weight
  • Precisely fitting design - specially developed for KTM models
  • Simple installation making use of a special quick-release mechanism
  • Removed in five seconds flat
Never without one! KTM plastic skid plates combine many special qualities:<ul><li class="li-disc"> Manufactured using state-of-the-art plastic injection moulding technology</li><li class="li-disc"> Made from special high-strength plastic</li><li class="li-disc"> Revised, extremely tough fastening system</li><li class="li-disc"> Developed for use in the toughest offroad terrain</li><li class="li-disc"> Maximum protection at minimum possible weight </li><li class="li-disc"> Precisely fitting design - specially developed for KTM models </li><li class="li-disc"> Simple installation making use of a special quick-release mechanism</li><li class="li-disc"> Removed in five seconds flat</li></ul> dölj mer info

77307040100

Lagerstatus: 1
Pris: 1615kr
PowerParts|Seats|Offroad
Seat
Specially designed for riders over 1.80 m tall. Approx. 20 mm higher than the standard seat.
Specially designed for riders over 1.80 m tall. Approx. 20 mm higher than the standard seat. dölj mer info

77307040200

Lagerstatus: hos lev.
Pris: 1615kr
PowerParts|Seats|Offroad
Seat
Also provides shorter riders with optimum control of the motorcycle in difficult terrain. Approx. 15 mm lower than the standard seat.
Also provides shorter riders with optimum control of the motorcycle in difficult terrain. Approx. 15 mm lower than the standard seat. dölj mer info

77307940050

Lagerstatus: 1
Pris: 880kr
PowerParts|Seats|Offroad
Seat cover
dölj mer info

79407978000

Lagerstatus: 4
Pris: 120kr
PowerParts|Seats|Offroad
Seat pocket
Recommended for storing your timecard during races. Stick it directly to the seat with grip glue.
Recommended for storing your timecard during races. Stick it directly to the seat with grip glue. dölj mer info

78007240100

Lagerstatus: 1
Pris: 1615kr
PowerParts|Seats|Offroad
Step up seat
The factory rider seat: Thanks to the special step, there's no slipping backwards when you open up the throttle either. Standard height.
The factory rider seat: Thanks to the special step, there's no slipping backwards when you open up the throttle either. Standard height. dölj mer info

78012955044

Lagerstatus: hos lev.
Pris: 5215kr
PowerParts|Suspension/triple clamp
Lowering kit
The low suspension kits specially developed by KTM in collaboration with WP are the perfect compromise between maximum chassis performance and minimum possible seat height. Just like the standard parts, the components used here are manufactured from the highest quality materials and, just like the standard parts, they have been specially tuned for offroad use in intensive endurance tests. To ensure best possible function of the suspension kits, we only recommend use with a rider weight of up to 70 kg.
The low suspension kits specially developed by KTM in collaboration with WP are the perfect compromise between maximum chassis performance and minimum possible seat height. Just like the standard parts, the components used here are manufactured from the highest quality materials and, just like the standard parts, they have been specially tuned for offroad use in intensive endurance tests. To ensure best possible function of the suspension kits, we only recommend use with a rider weight of up to 70 kg. dölj mer info

78004905000

Lagerstatus: hos lev.
Pris: 1730kr
PowerParts|Suspension/triple clamp
Preload adjuster
Quick, precise chassis adjustment and improved appearance with the preload adjuster for the shock absorber.
The main benefits:
  • Quick preload adjustment
  • Use of the entire thread length on the shock absorber
  • Very simple to use
  • Low weight
  • dust-resistant
  • Mechanical drive mechanism
The shock absorber must be dismantled in order to fit the pre-load adjuster.
Quick, precise chassis adjustment and improved appearance with the preload adjuster for the shock absorber.<br />The main benefits:<ul><li class="li-disc"> Quick preload adjustment</li><li class="li-disc"> Use of the entire thread length on the shock absorber</li><li class="li-disc"> Very simple to use</li><li class="li-disc"> Low weight</li><li class="li-disc"> dust-resistant</li><li class="li-disc"> Mechanical drive mechanism</li></ul>The shock absorber must be dismantled in order to fit the pre-load adjuster. dölj mer info

48600074S9

Lagerstatus: hos lev.
Pris: 1615kr
PowerParts|Suspension/triple clamp
Preload adjuster set
Allows external setting of the spring preload.
Allows external setting of the spring preload. dölj mer info

59431096000

Lagerstatus: 1
Pris: 590kr
PowerParts|Tanks
Expansion tank
Prevents spilt fuel from seeping into the ground. Already a requirement at most Supermoto races. Suitable for all carburetor vent hoses.
Prevents spilt fuel from seeping into the ground. Already a requirement at most Supermoto races. Suitable for all carburetor vent hoses. dölj mer info

78107908144

Lagerstatus: hos lev.
Pris: 800kr
PowerParts|Tanks
Factory fuel cap
DO YOU KNOW that all KTM CNC parts are manufactured from highest quality aluminum and therefore not only look good, they also withstand the toughest treatment? With the anodized aluminum components in the original factory look from the PowerParts range, you can turn your KTM into something very special.
DO YOU KNOW that all KTM CNC parts are manufactured from highest quality aluminum and therefore not only look good, they also withstand the toughest treatment? With the anodized aluminum components in the original factory look from the PowerParts range, you can turn your KTM into something very special. dölj mer info

U6951010

Lagerstatus: 9
Pris: 115kr
PowerParts|Tanks
Factory fuel cap vent
DO YOU KNOW that all KTM CNC parts are manufactured from highest quality aluminum and therefore not only look good, they also withstand the toughest treatment? With the anodized aluminum components in the original factory look from the PowerParts range, you can turn your KTM into something very special.
DO YOU KNOW that all KTM CNC parts are manufactured from highest quality aluminum and therefore not only look good, they also withstand the toughest treatment? With the anodized aluminum components in the original factory look from the PowerParts range, you can turn your KTM into something very special. dölj mer info

78107990100

Lagerstatus: 9
Pris: 335kr
PowerParts|Tanks
Fuel filter
Easy and safe: Filter fitted directly at the tank opening. This means that no dirt enters the fuel tank or the injection system during refueling. Fits on all 3/4 in filler caps.
Easy and safe: Filter fitted directly at the tank opening. This means that no dirt enters the fuel tank or the injection system during refueling. Fits on all 3/4 in filler caps. dölj mer info

7723199700004

Lagerstatus: 2
Pris: 255kr
PowerParts|Tanks
Vent hose
Fuel-proof for tank and carburetor venting, approx. 3 m. Should only be used for venting purposes and not as a connection between tank and carburetor.
Fuel-proof for tank and carburetor venting, approx. 3 m. Should only be used for venting purposes and not as a connection between tank and carburetor. dölj mer info

78029155000

Lagerstatus: 1
Pris: 1030kr
PowerParts|Tool/transport|Stands
Bike stand
High quality plastic stand designed especially for KTM offroad bikes. Special features:
  • Two different heights possible
  • Can be used as a stand for the quickfill system
  • Storage space for the front and rear axle when removing the wheels
  • Attachments for the following parts: mud removal tool, exhaust plug, magnetic bolt pan and various tools
High quality plastic stand designed especially for KTM offroad bikes. Special features: <ul><li class="li-disc"> Two different heights possible</li><li class="li-disc"> Can be used as a stand for the quickfill system</li><li class="li-disc"> Storage space for the front and rear axle when removing the wheels</li><li class="li-disc"> Attachments for the following parts: mud removal tool, exhaust plug, magnetic bolt pan and various tools</li></ul> dölj mer info

78029155100

Lagerstatus: hos lev.
Pris: 1150kr
PowerParts|Tool/transport|Stands
Bike stand kit
High quality plastic stand designed especially for KTM offroad bikes. Complete with mud removal tool, exhaust plug and magnetic bolt pan.
High quality plastic stand designed especially for KTM offroad bikes. Complete with mud removal tool, exhaust plug and magnetic bolt pan. dölj mer info

77703020000

Lagerstatus: 1
Pris: 320kr
PowerParts|Tool/transport|Stands
Plug-in stand
dölj mer info

78003923050

Lagerstatus: 1
Pris: 685kr
PowerParts|Tool/transport|Stands
Stand plate
Specially for soft ground, such as sand. Size: 75 mm x 50 mm
Specially for soft ground, such as sand. Size: 75 mm x 50 mm dölj mer info

59006098100

Lagerstatus: 1
Pris: 150kr
PowerParts|Tool/transport|Tool
Air filter cover
Highly recommended! Protects the intake tract from water and dirt when cleaning the air filter box.
Highly recommended! Protects the intake tract from water and dirt when cleaning the air filter box. dölj mer info

58429074200

Lagerstatus: 1
Pris: 755kr
PowerParts|Tool/transport|Tool
Battery charger
Battery charger with test function. Plus:
- Constant current charge
- Constant voltage charge
- Trickle charging
Comes with cable for fixed installation on the battery and with connector for connecting the battery to the battery charger quickly.
Caution: The battery charger must not be connected to lithium-ion batteries.
Battery charger with test function. Plus:<br />- Constant current charge <br />- Constant voltage charge <br />- Trickle charging <br />Comes with cable for fixed installation on the battery and with connector for connecting the battery to the battery charger quickly.<br />Caution: The battery charger must not be connected to lithium-ion batteries. dölj mer info

58429074000

Lagerstatus: hos lev.
Pris: 1900kr
PowerParts|Tool/transport|Tool
Battery charging and testing unit
A must for every workshop/garage. Testing, charging and keeping batteries fresh made easy. Fully automatic and economical battery charging by means of programmed charge characteristic.
Clear LC display shows charging level. Reverse polarity protection, short-circuit protection, overload protection.
Adapter for UK : 584.29.074.001, Adapter for AUS: 584.29.074.002
CAUTION: The battery charger must not be connected to lithium-ion batteries for longer than 24h, lithium-ion batteries are also not suitable for trickle charging.
A must for every workshop/garage. Testing, charging and keeping batteries fresh made easy. Fully automatic and economical battery charging by means of programmed charge characteristic.<br />Clear LC display shows charging level. Reverse polarity protection, short-circuit protection, overload protection.<br />Adapter for UK : 584.29.074.001, Adapter for AUS: 584.29.074.002<br />CAUTION: The battery charger must not be connected to lithium-ion batteries for longer than 24h, lithium-ion batteries are also not suitable for trickle charging. dölj mer info

00029901000

Lagerstatus: 2
Pris: 290kr
PowerParts|Tool/transport|Tool
Bead buddy
The Bead Buddy acts as your third hand when fitting tires. Holds the tire in the tire bed, thereby making tire fitting much easier. Simply hook it into the spokes and away you go. Particularly recommended for tire fitting with mousse.
The Bead Buddy acts as your third hand when fitting tires. Holds the tire in the tire bed, thereby making tire fitting much easier. Simply hook it into the spokes and away you go. Particularly recommended for tire fitting with mousse. dölj mer info

00029940000

Lagerstatus: hos lev.
Pris: 345kr
PowerParts|Tool/transport|Tool
Cable organizer
  • Easy handling and operation
  • More safety
  • Less wear on the cord
  • Made of high quality material
  • Cable not included
<ul><li class="li-disc">Easy handling and operation</li><li class="li-disc">More safety</li><li class="li-disc">Less wear on the cord</li><li class="li-disc">Made of high quality material</li><li class="li-disc">Cable not included</li></ul> dölj mer info

U6951130

Lagerstatus: 2
Pris: 115kr
PowerParts|Tool/transport|Tool
Cable tie
100x, length:20 cm.
100x, length:20 cm. dölj mer info

35-2801

Lagerstatus: 46
Pris: 209kr
PowerParts|Tool/transport|Tool
Chain breaker
dölj mer info

00029920000EB

Lagerstatus: 3
Pris: 230kr
PowerParts|Tool/transport|Tool
Chain gage

Patented gage for three important checks:

  • Check and adjust chain tension
  • Check chain lengthening (wear)
  • Check positioning of rear wheel axle
<p>Patented gage for three important checks:</p><ul><li class="li-square">Check and adjust chain tension</li><li class="li-square">Check chain lengthening (wear)</li><li class="li-square">Check positioning of rear wheel axle</li></ul> dölj mer info

79129941000

Lagerstatus: 2
Pris: 205kr
PowerParts|Tool/transport|Tool
Feeler gauge
0.10 mm; 0.12 mm; 0.15 mm; 0.20 mm; 0.25 mm
0.10 mm; 0.12 mm; 0.15 mm; 0.20 mm; 0.25 mm dölj mer info

60412002000

Lagerstatus: 6
Pris: 170kr
PowerParts|Tool/transport|Tool
First aid kit
  • Contents are in accordance with DIN standard 13167-2014 for motorcyclists
  • Waterproof packaging
  • With its slim shape and Velcro straps at the back, the first aid kit is easy to store

Note:

It is mandatory to carry a first aid kit in many countries (such as Austria, Italy, Portugal and Spain).

<ul><li class="li-square">Contents are in accordance with DIN standard 13167-2014 for motorcyclists</li><li class="li-square">Waterproof packaging</li><li class="li-square">With its slim shape and Velcro straps at the back, the first aid kit is easy to store</li></ul><p>Note:</p><p>It is mandatory to carry a first aid kit in many countries (such as Austria, Italy, Portugal and Spain).</p> dölj mer info

77312030000

Lagerstatus: 3
Pris: 635kr
PowerParts|Tool/transport|Tool
Foot pump
Small and light, so very portable - saves the day in the event of a puncture on the move! Mini-footpump with pressure gauge on the swiveling valve head that fits all prevalent valves. Integrated double-cylinder with pressure switch-over to high pressure. Maximum 12 bar. Height: approx. 170 mm folded together.
Small and light, so very portable - saves the day in the event of a puncture on the move! Mini-footpump with pressure gauge on the swiveling valve head that fits all prevalent valves. Integrated double-cylinder with pressure switch-over to high pressure. Maximum 12 bar. Height: approx. 170 mm folded together. dölj mer info

78129994000

Lagerstatus: 9
Pris: 335kr
PowerParts|Tool/transport|Tool
Fork seal doctor
This clever tool is a must for every motorcycle toolbox. With it, you can remove dirt from your fork seals effortlessly. No matter whether it's in the garage or directly at the racetrack. this tool extends the life of your seals many times over. For all 48 mm forks.
This clever tool is a must for every motorcycle toolbox. With it, you can remove dirt from your fork seals effortlessly. No matter whether it's in the garage or directly at the racetrack. this tool extends the life of your seals many times over. For all 48 mm forks. dölj mer info

59029050000

Lagerstatus: 6
Pris: 115kr
PowerParts|Tool/transport|Tool
Funnel
Funnel specially developed for KTM motorcycles. Diameter (small and large) optimized to suit the filler neck; special groove for optimum ventilation.
Funnel specially developed for KTM motorcycles. Diameter (small and large) optimized to suit the filler neck; special groove for optimum ventilation. dölj mer info

SXS08250035

Lagerstatus: 1
Pris: 45kr
PowerParts|Tool/transport|Tool
Jet needle removal kit
Allows simple replacement of the carburetor needle.
Allows simple replacement of the carburetor needle. dölj mer info

78029063000

Lagerstatus: 6
Pris: 115kr
PowerParts|Tool/transport|Tool
Measuring cup
With scaling for both the fluid level and different mixture ratios. Perfect for changing the oil and for preparing larger quantities of 2-stroke mixture in the canister. Simple handling thanks to the ergonomic design.
With scaling for both the fluid level and different mixture ratios. Perfect for changing the oil and for preparing larger quantities of 2-stroke mixture in the canister. Simple handling thanks to the ergonomic design. dölj mer info

54829035000

Lagerstatus: 10
Pris: 100kr
PowerParts|Tool/transport|Tool
Mud removal tool
Use this to remove the dirt from your last mud battle with ease! A motorcycle grip rubber (not included) can be fitted to the grip.
Use this to remove the dirt from your last mud battle with ease! A motorcycle grip rubber (not included) can be fitted to the grip. dölj mer info

00029997000

Lagerstatus: 1
Pris: 810kr
PowerParts|Tool/transport|Tool
Multi-purpose tool
The perfect alternative tool on the go. Conveniently packaged in a small bag you can use the tool for following fittings: 14, 12, 10, 8 mm hexagon sockets; 6, 8, 13 mm socket wrench; Inserts for slotted and Phillips screw heads, 5 mm / 6 mm Allen keys, 25/30 and 40/45 Torx; bottle opener; Option for attaching for 3/8 "and 1/4" socket wrench.
The perfect alternative tool on the go. Conveniently packaged in a small bag you can use the tool for following fittings: 14, 12, 10, 8 mm hexagon sockets; 6, 8, 13 mm socket wrench; Inserts for slotted and Phillips screw heads, 5 mm / 6 mm Allen keys, 25/30 and 40/45 Torx; bottle opener; Option for attaching for 3/8 "and 1/4" socket wrench. dölj mer info

7802906500004

Lagerstatus: 11
Pris: 115kr
PowerParts|Tool/transport|Tool
Oil bottle
Perfect for all 2-stroke riders on the move. The small bottle fits in your tool bag or jacket. Capacity 250 ml, with scaling for different mixture ratios (1 : 40 / 2.5 %; 1 : 50 / 2 %; 1 : 60 / 1.7 %; 1 : 80 / 1.25 %)
Perfect for all 2-stroke riders on the move. The small bottle fits in your tool bag or jacket. Capacity 250 ml, with scaling for different mixture ratios (1 : 40 / 2.5 %; 1 : 50 / 2 %; 1 : 60 / 1.7 %; 1 : 80 / 1.25 %) dölj mer info

59512030200

Lagerstatus: 5
Pris: 81kr
PowerParts|Tool/transport|Tool
Plug
Keeps water out of the silencer during cleaning. For internal diameters 37 mm – 62 mm.
Keeps water out of the silencer during cleaning. For internal diameters 37 mm – 62 mm. dölj mer info

7901203000004

Lagerstatus: 1
Pris: 81kr
PowerParts|Tool/transport|Tool
Plug
Keeps water out of the silencer during cleaning. For internal diameters 37 mm - 62 mm.
Keeps water out of the silencer during cleaning. For internal diameters 37 mm - 62 mm. dölj mer info

7901203010004

Lagerstatus: 14
Pris: 81kr
PowerParts|Tool/transport|Tool
Plug
To prevent the ingress of water in the silencer when cleaning. For inner diameters 15 mm - 38 mm.
To prevent the ingress of water in the silencer when cleaning. For inner diameters 15 mm - 38 mm. dölj mer info

54812016000

Lagerstatus: 1
Pris: 405kr
PowerParts|Tool/transport|Tool
Safety wire
200 m Wire with 0.61 mm diameter.
200 m Wire with 0.61 mm diameter. dölj mer info

00029090100

Lagerstatus: 2
Pris: 635kr
PowerParts|Tool/transport|Tool
Sag scale
Makes setting the sag significantly simpler. Folding version for easy stowing in the tool box.
Makes setting the sag significantly simpler. Folding version for easy stowing in the tool box. dölj mer info

00029999300

Lagerstatus: hos lev.
Pris: 1150kr
PowerParts|Tool/transport|Tool
Screw kit