• Orange with KTM logo
• 50 mm wide & 99 m long

Familiar from MotoGP and our Moto 3 factory bikes:

• Protects the lever in the event of unintentional ground contact
• No unintentional lever actuation in the event of contact with another rider/vehicle
• Simple exchange with the standard handlebar weight
• Lever guard made from unbreakable plastic
• Handlebar fitting made from high-grade cast aluminum
• Plastic guard can be replaced individually

Familiar from MotoGP and our Moto 3 factory bikes:

• Protects the lever in the event of unintentional ground contact
• No unintentional lever actuation in the event of contact with another rider/vehicle
• Simple exchange with the standard handlebar weight
• Lever guard made from unbreakable plastic
• Handlebar fitting made from high-grade cast aluminum
• Plastic guard can be replaced individually

Familiar from MotoGP and our Moto 3 factory bikes:

• Protects the lever in the event of unintentional ground contact
• No unintentional lever actuation in the event of contact with another rider/vehicle
• Simple exchange with the standard handlebar weight
• Lever guard made from unbreakable plastic
• Handlebar fitting made from high-grade cast aluminum
• Plastic guard can be replaced individually

Familiar from MotoGP and our Moto 3 factory bikes:

• Protects the lever in the event of unintentional ground contact
• No unintentional lever actuation in the event of contact with another rider/vehicle
• Simple exchange with the standard handlebar weight
• Lever guard made from unbreakable plastic
• Handlebar fitting made from high-grade cast aluminum
• Plastic guard can be replaced individually

DO YOU KNOW that all KTM CNC parts are manufactured from highest quality aluminum and therefore not only look good, they also withstand the toughest treatment? With the anodized aluminum components in the original factory look from the PowerParts range, you can turn your KTM into something very special.

In combination with the rear wheel lifting gear, this front wheel lifting gear ensures optimum support for winter storage and for working.

Please order the vehicle-specific support mandrel separately.

The closed, two-component plastic handguards developed by KTM feature a black center section that offers maximum strength for optimum protection. The colorful upper and lower parts are highly flexible and endure even the roughest of treatment without complaint. Available in two different heights.

• Enables secure attachment to the machine without scratching your handlebars or tank
• Made from durable ballistic nylon
• Load capacity of 280 kg
• Dimensions: 3,8 cm x 0,6 m
• 2 units

• Enables secure attachment to the machine without scratching your handlebars or tank
• Made from durable ballistic nylon
• Load capacity of 280 kg
• With handlebar loops
• With rubberized hooks on both belt ends
• 2 units

DO YOU KNOW that all KTM CNC parts are manufactured from highest quality aluminum and therefore not only look good, they also withstand the toughest treatment? With the anodized aluminum components in the original factory look from the PowerParts range, you can turn your KTM into something very special.

• Spring-mounted, 20° rotational movement possible towards front and rear
• More control and grip in the corners thanks to the maneuverability
• Large tread surface area of 60 mm
• Simpler and quicker weight shifting
• Simpler gear changing and braking
• Permanent contact between boot and foot pegs: extends the service life of your boots!

• Manufactured from high-strength 7075-T6 aluminum, the strongest aluminum in the world
• Free from vibration - therefore the highest power transmission efficiency
• No small stones or dirt particles can become stuck under the chain thanks to angled recesses between the teeth
• Orange anodized with a permanent, organic and environmentally friendly pigment

• Manufactured from high-strength 7075-T6 aluminium - the world's strongest aluminium.
• Sprockets with different teeth number as stock are CCCUO_EU!

• Manufactured from high-strength 7075-T6 aluminum - the world's strongest aluminum

The orange rear sprocket is already a true classic that has established itself with really strong arguments and many benefits:

• Manufactured from high-strength 7075-T6 aluminium, the strongest aluminium in the world
• Free from vibration - therefore the highest power transmission efficiency
• No small stones or dirt particles can become stuck under the chain thanks to angled recesses between the teeth
• Orange anodised with a permanent, organic and environmentally friendly pigment

The orange rear sprocket is already a true classic that has established itself with really strong arguments and many benefits:

• Manufactured from high-strength 7075-T6 aluminium, the strongest aluminium in the world
• Free from vibration - therefore the highest power transmission efficiency
• No small stones or dirt particles can become stuck under the chain thanks to angled recesses between the teeth
• Orange anodised with a permanent, organic and environmentally friendly pigment

The orange rear sprocket is already a true classic that has established itself with really strong arguments and many benefits:

• Manufactured from high-strength 7075-T6 aluminium, the strongest aluminium in the world
• Free from vibration - therefore the highest power transmission efficiency
• No small stones or dirt particles can become stuck under the chain thanks to angled recesses between the teeth
• Orange anodised with a permanent, organic and environmentally friendly pigment

• Manufactured from high-strength 7075-T6 aluminum, the strongest aluminum in the world
• Free from vibration - therefore the highest power transmission efficiency
• No small stones or dirt particles can become stuck under the chain thanks to angled recesses between the teeth
• Orange anodized with a permanent, organic and environmentally friendly pigment

• Made from polyester, with special rubberized back
• Gas and oil resistant
• In special KTM design
• Size: 100 x 170 cm

• Ratchet (with locking device), lever, two extensions and socket wrench
• Hexagon sockets from 4 to 14
• Allen keys from 3 to 8
• Phillips, slotted and Torx bits

• Ratchet (with locking device), lever, two extensions and socket wrench
• Hexagon sockets from 6 to 24
• Allen keys from 3 to 10
• Phillips and slotted bits
• Torx bits from 15 to 55

The iBracket is the perfect solution for attaching your smartphone quickly and securely to your vehicle, if you want to use it for navigation, for example.

• Intelligent 3D closure with one-handed operation
• CNC laser-cut and shaped stainless steel components
• Tailor-made precision closure contour
• Plastic corners with UV light-resistant silicone rings
• Rotatable by 90°
• Dimensions: 142 x 72,5 x 8,1 mm

The iBracket can be fitted on all our mountings for GPS brackets and it takes only a few minutes.

Also suitable for other smartphones:

• Sony Xperia M2
• Samsung A5
• Nokia Lumia 930
• Nokia Lumia 1020
• Nokia Lumia 830

The iBracket is the perfect solution for attaching your smartphone quickly and securely to your vehicle, if you want to use it for navigation, for example.

• Intelligent 3D closure with one-handed operation
• CNC laser-cut and shaped stainless steel components
• Tailor-made precision closure contour
• Plastic corners with UV light-resistant silicone rings
• Rotatable by 90°
• Dimensions: 158,2 x 77,9 x 7,3 mm

The iBracket can be fitted on all our mountings for GPS brackets and it takes only a few minutes.

The iBracket is the perfect solution for attaching your smartphone quickly and securely to your vehicle, if you want to use it for navigation, for example.

• Intelligent 3D closure with one-handed operation
• CNC laser-cut and shaped stainless steel components
• Tailor-made precision closure contour
• Plastic corners with UV light-resistant silicone rings
• Rotatable by 90°
• Dimensions: 138,1 x 67 x 6,9 mm

The iBracket can be fitted on all our mountings for GPS brackets and it takes only a few minutes.

Also suitable for other smartphones:

• Samsung Galaxy Alpha
• Huawei Ascend Y530

• The Z-ring or X-ring has 4 contact points in contrast to 2 contact points with the O-ring version
• This means higher flexibility and better running characteristics for the Z-ring or X-ring chain
• The spring effect of the Z-ring or X-ring guarantees consistent and permanent lubrication
• This means a significantly longer service life for the Z-ring or X-ring chain
• The Z-ring or X-ring provides a better seal against penetration by water and dirt

Adaptive brake lights are already very widely fitted as standard in the automotive industry, now you can retrofit one to your KTM as well.

Benefits and safety features:

• High-end electronics detect emergency braking based on speed and deceleration values
• If emergency braking is detected, the brake light flashes until the brake is released
• A flashing light is noticed more quickly
• Minimizes risk of a rear-end collision
• Only for models without ABS

• The Z-ring or X-ring has 4 contact points in contrast to 2 contact points with the O-ring version
• This means higher flexibility and better running characteristics for the Z-ring or X-ring chain
• The spring effect of the Z-ring or X-ring guarantees consistent and permanent lubrication
• This means a significantly longer service life for the Z-ring or X-ring chain
• The Z-ring or X-ring provides a better seal against penetration by water and dirt

• Manufactured from high-strength 7075-T6 aluminum, the strongest aluminum in the world
• Originally developed for the aerospace industry and then adopted by the best rear sprocket manufacturer
• The chain runs smoothly, straigt as a die and true, because it`s ground level to an accuracy of 0.002mm
• Free from vibration - therefore the highest power transmission efficiency
• Orange anodized with a permanent, organic and environmentally friendly pigment
• Sprockets with different teeth number as stock are CCCUO_EU!

• For longer trips, we recommend this extremely low-wear, QStE 460 steel sprocket.
• Sprockets with different teeth number as stock are CCCUO_EU!

• High-strength alloy steel teeth for extra long life
• Aluminum center section reduces the unsprung mass
• Permanently joined together with high-tensile rivets
• At least three times longer service life than any other aluminum rear sprockets
• 50% lighter than conventional steel sprockets

Further advantages: Longer service life of the entire drive train kit

Manufactured exclusively for KTM by Supersprox. This product is protected by the following patents in the EU and the US. EU Patent # EP1573234. US Patent # 7.481.729. Patent holder Supersprox a.s.

• High-strength alloy steel teeth for extra long life
• Aluminum center section reduces the unsprung mass
• Permanently joined together with high-tensile rivets
• At least three times longer service life than any other aluminum rear sprockets
• 50% lighter than conventional steel sprockets

Further advantages: Longer service life of the entire drive train kit

These high-quality aluminum CNC components feature a superior abrasion-resistant eloxal coating and make a bold visual statement.

These high-quality aluminum CNC components feature a superior abrasion-resistant eloxal coating and make a bold visual statement.

These high-quality aluminum CNC components feature a superior abrasion-resistant eloxal coating and make a bold visual statement.

Ingenious: Foot pegs that move with you when you shift your weight. Ideal for Motocross, Enduro and Supermoto.

The benefits:

• Spring-mounted, 20-degree rotational movement possible towards front and rear
• More control and grip in the corners thanks to the maneuverability
• Large tread surface of 60 mm
• Simpler and quicker weight shifting
• Simpler gear changing and braking
• Permanent contact between boot and foot peg: extends the service life of your boots!

• Ergonomic; contour matched to the shape of the hand for maximum comfort
• Small "half waffle" ribs on the rear for secure grip
• Made from two materials with different grades of hardness
• Three areas for the metal safety wire
• Grip hardness: medium

• Ergonomic; contour matched to the shape of the hand for maximum comfort
• Small "half waffle" ribs on the rear for secure grip
• Made from two materials with different grades of hardness
• Three areas for the metal safety wire
• Grip hardness: soft

• Harder orange material on the inside and at the grip ends for a long service life
• Softer black material on the outside, where the hand lies on the grip, for increased comfort
• With open grip ends for closed handguards or bar ends

• Harder orange material on the inside and at the grip ends for a long service life
• Softer black material on the outside, where the hand lies on the grip, for increased comfort

• Protects the lever in the event of unintentional ground contact
• No unintentional lever actuation in the event of contact with another rider/vehicle
• Simple exchange with the standard handlebar weight
• Lever guard made from unbreakable plastic
• Handlebar fitting made from high-grade cast aluminum
• Plastic guard can be replaced individually

Familiar from MotoGP and our Moto 3 factory bikes:

• Protects the lever in the event of unintentional ground contact
• No unintentional lever actuation in the event of contact with another rider/vehicle
• Simple exchange with the standard handlebar weight
• Lever guard made from unbreakable plastic
• Handlebar fitting made from high-grade cast aluminum
• Plastic guard can be replaced individually

This handguard set is not just visually impressive. Thanks to the special mix of materials, the handguard protects your hands and controls from damage without immediately breaking up. They also give you outstanding weather protection.

This handguard set is not just visually impressive. Thanks to the special mix of materials, the handguard protects your hands and controls from damage without immediately breaking up. They also give you outstanding weather protection.

This handguard set is not just visually impressive. Thanks to the special mix of materials, the handguard protects your hands and controls from damage without immediately breaking up. They also give you outstanding weather protection.

• 78002079100EB is mounted standard on the 790 Adventure R
  

• Cushioning of heavy knocks
• Absorption of vibration from chassis and engine
• Additional handlebar damping in horizontal direction
• Optimum steering precision
• Handlebar height adjustable to 2 positions
• Further damping elements available in three degrees of hardness (soft, medium, hard) for individual tuning

Medium-strength thread lock. Suitable for all metal thread connections.

Medium strength thread lock - contents, 50 ml.

• Temperature resistant from -55 to +200 °C 
• Fills gaps up to 0.25 mm
• Final strength achieved after 1 to 3 hours
  

• Waterproof resistant coating
• Waterproof roll closure

• Volume: 16 - 32 l
• Including rain cover
• Backpack function, with very high quality back part and shoulder straps
• Shoulder straps will be used for mounting the bag on the motorcylce
• Stowage compartment for U-lock 60012016000
• For fixing the bag on the 1290 Super Duke GT and 790 Duke, it is recommended to mount the grips for the pillion

Bag with Quicklock system for easy mounting. The volume of the bag can be varied between 12 l and 18 l.
An additional carrier plate is required for mounting.

• Manufactured from durable nylon, with abrasion-resistant edging made from reflective material
• Extremely robust, all-round zip fasteners
• Map pocket, individual compartments
• Attached with sturdy soft ties
• Max. volume 18 l
• Scope of supply: tank bag, rain hood, shoulder strap

With 48 liter of storage space, this top case easily stows two full-face helmets. It makes use of a practical press-lock system and a combination lock for opening the cover and releasing the fastening.

• Dimensions 61 cm x 46 cm x 31 cm
• Volume 48 l

With 48 liter of storage space, this top case easily stows two full-face helmets. It makes use of a practical press-lock system and a combination lock for opening the cover and releasing the fastening.

• Dimensions 61 cm x 46 cm x 31 cm
• Volume 48 l

With 48 liter of storage space, this top case easily stows two full-face helmets. It makes use of a practical press-lock system and a combination lock for opening the cover and releasing the fastening.

• Dimensions 61 cm x 46 cm x 31 cm
• Volume 48 l

With 48 liter of storage space, this top case easily stows two full-face helmets. It makes use of a practical press-lock system and a combination lock for opening the cover and releasing the fastening.

• Dimensions 61 cm x 46 cm x 31 cm
• Volume 48 l

With 48 liter of storage space, this top case easily stows two full-face helmets. It makes use of a practical press-lock system and a combination lock for opening the cover and releasing the fastening.

• Dimensions 61 cm x 46 cm x 31 cm
• Volume 48 l

• Suitable for all KTM GPS holders
• Size: 170 x 130 x 35 mm

Only for use on original handlebar mounting.

• Universal and discreet mounting solution for your smartphone
• Counterpart for the smartphone cases.
• The smartphone can be easily mounted on the motorcycle by turning it 90°.
• Can be clamped on the handlebar (including different adaptor)
• The arm can be rotated in any position for the perfect position for your smartphone.

• Protects your expensive smartphone and still keeping a slim design
• Integrated counterpart for the smartphone bracket
• The smartphone can be easily mounted on the motorcycle by turning it 90°

• Protects your expensive smartphone and still keeping a slim design
• Integrated counterpart for the smartphone bracket
• The smartphone can be easily mounted on the motorcycle by turning it 90°

• Protects your expensive smartphone and still keeping a slim design
• Integrated counterpart for the smartphone bracket
• The smartphone can be easily mounted on the motorcycle by turning it 90°

• Protects your expensive smartphone and still keeping a slim design
• Integrated counterpart for the smartphone bracket
• The smartphone can be easily mounted on the motorcycle by turning it 90°

• Unobtrusive protection for your expensive smartphone
• Integrated counterpart for the smartphone bracket
• The smartphone can easily be mounted on the bracket by turning it 90°.

• Unobtrusive protection for your expensive smartphone
• Integrated counterpart for the smartphone bracket
• The smartphone can easily be mounted on the bracket by turning it 90°.

• Unobtrusive protection for your expensive smartphone
• Integrated counterpart for the smartphone bracket
• The smartphone can easily be mounted on the bracket by turning it 90°.

• Protects your expensive smartphone and still keeping a slim design
• Integrated counterpart for the smartphone bracket
• The smartphone can be easily mounted on the motorcycle by turning it 90°

• Protects your expensive smartphone and still keeping a slim design
• Integrated counterpart for the smartphone bracket
• The smartphone can be easily mounted on the motorcycle by turning it 90°

• Protects your expensive smartphone and still keeping a slim design
• Integrated counterpart for the smartphone bracket
• The smartphone can be easily mounted on the motorcycle by turning it 90°

• Protects your expensive smartphone and still keeping a slim design
• Integrated counterpart for the smartphone bracket
• The smartphone can be easily mounted on the motorcycle by turning it 90°

• Unobtrusive protection for your expensive smartphone
• Integrated counterpart for the smartphone bracket
• The smartphone can easily be mounted on the bracket by turning it 90°.

• Unobtrusive protection for your expensive smartphone
• Integrated counterpart for the smartphone bracket
• The smartphone can easily be mounted on the bracket by turning it 90°.

• Can be stuck on any flat surface (rear side of smartphone, or smartphone case)
• Integrated counterpart for the smartphone bracket
• The smartphone can be easily mounted on the motorcycle by turning it 90°
• Dimensions: 66x55mm (2.6x2.17 inch)

The iBracket is the perfect solution for attaching your smartphone quickly and securely to your vehicle, if you want to use it for navigation, for example.

• Intelligent 3D closure with one-handed operation
• CNC laser-cut and shaped stainless steel components
• Tailor-made precision closure contour
• Plastic corners with UV light-resistant silicone rings
• Rotatable by 90°
• Dimensions: 142 x 72,5 x 8,1 mm

The iBracket can be fitted on all our mountings for GPS brackets and it takes only a few minutes.

Also suitable for other smartphones:

• Sony Xperia M2
• Samsung A5
• Nokia Lumia 930
• Nokia Lumia 1020
• Nokia Lumia 830

The iBracket is the perfect solution for attaching your smartphone quickly and securely to your vehicle, if you want to use it for navigation, for example.

• Intelligent 3D closure with one-handed operation
• CNC laser-cut and shaped stainless steel components
• Tailor-made precision closure contour
• Plastic corners with UV light-resistant silicone rings
• Rotatable by 90°

The iBracket can be fitted on all our mountings for GPS brackets and it takes only a few minutes.

The iBracket is the perfect solution for attaching your smartphone quickly and securely to your vehicle, if you want to use it for navigation, for example.

• Intelligent 3D closure with one-handed operation
• CNC laser-cut and shaped stainless steel components
• Tailor-made precision closure contour
• Plastic corners with UV light-resistant silicone rings
• Rotatable by 90°

The iBracket can be fitted on all our mountings for GPS brackets and it takes only a few minutes.

The iBracket is the perfect solution for attaching your smartphone quickly and securely to your vehicle, if you want to use it for navigation, for example.

• Intelligent 3D closure with one-handed operation
• CNC laser-cut and shaped stainless steel components
• Tailor-made precision closure contour
• Plastic corners with UV light-resistant silicone rings
• Rotatable by 90°
• Dimensions: 138,1 x 67 x 6,9 mm

The iBracket can be fitted on all our mountings for GPS brackets and it takes only a few minutes.

Also suitable for other smartphones:

• Samsung Galaxy Alpha
• Huawei Ascend Y530

The iBracket is the perfect solution for attaching your smartphone quickly and securely to your vehicle, if you want to use it for navigation, for example.

• Intelligent 3D closure with one-handed operation
• CNC laser-cut and shaped stainless steel components
• Tailor-made precision closure contour
• Plastic corners with UV light-resistant silicone rings
• Rotatable by 90°
• Dimensions: 158,2 x 77,9 x 7,3 mm

The iBracket can be fitted on all our mountings for GPS brackets and it takes only a few minutes.

The iBracket is the perfect solution for attaching your smartphone quickly and securely to your vehicle, if you want to use it for navigation, for example.

• Intelligent 3D closure with one-handed operation
• CNC laser-cut and shaped stainless steel components
• Tailor-made precision closure contour
• Plastic corners with UV light-resistant silicone rings
• Rotatable by 90°

The iBracket can be fitted on all our mountings for GPS brackets and it takes only a few minutes.

• Made from neoprene
• Ideal protection for sealing the fork
• For use with the closed fork protector
• For fork tube with a diameter of 48 mm

• Made from neoprene
• Ideal protection for sealing the fork
• For use with the open fork protector
• For fork tube with a diameter of 48 mm

Required for installing alarm system 60012035100; contains all the necessary parts for fixing it securely to the vehicle.

• Lock body machined from high-grade aluminum
• Premium quality, orange anodized surface finish
• Bolted directly to the brake caliper
• High-strength steel pin slides directly into the holes in the brake disc
• No vehicle movement possible when locked
• No dismantling possible when locked

• This paddock stand adaptor offers an even better stand for your KTM
• A designed braking point allows you to remove the rest of the bolt out of the swingarm in case of a crash

• This paddock stand adaptor offers an even better stand for your KTM
• A designed braking point allows you to remove the rest of the bolt out of the swingarm in case of a crash

• Easy handling and operation
• More safety
• Less wear on the cord
• Made of high quality material
• Cable not included

• 100 mm length
• 20 blades: 0,05 - 0,1 - 0,15 - 0,2 - 0,25 - 0,3- 0,35 - 0,4 - 0,45 - 0,5 - 0,55 - 0,6 - 0,65 - 0,7 - 0,75 - 0,8 - 0,85 - 0,9 - 0,95 - 1,0 mm

• Contents are in accordance with DIN standard 13167-2014 for motorcyclists
• Waterproof packaging
• With its slim shape and Velcro straps at the back, the first aid kit is easy to store

Note:

It is mandatory to carry a first aid kit in many countries (such as Austria, Italy, Portugal and Spain).

The optimum solution for always having the most important tools to hand when on the road.

• Ratchet (with locking device), lever, two extensions and socket wrench
• Hexagon sockets from 6 to 24
• Allen keys from 3 to 10
• Phillips and slotted bits
• Torx bits from 15 to 55

• Ratchet (with locking device), lever, two extensions and socket wrench
• Hexagon sockets from 4 to 14
• Allen keys from 3 to 8
• Phillips, slotted and Torx bits

• Push-on spoke wrenches in sizes 5.65 and 6.95 mm
• Push-on ratchet ¼"
• Ratchet attachments: 6, 8, 10 mm socket wrench, 15 Torx

• Optimum tire temperature achieved in just 30 min
• LED for monitoring tire warming
• Turns off automatically when the temperature reaches 78 °C to 80 °C
• Special fire-proof internal insulation in pure aramid fiber for maximum energy efficiency
• External cable and plug made of special rubber, resistant to grease and oil (max temp. 200 °C)
• Manufactured from robust nylon, with silicone surface finish for protection against acid and dirt
• Completely waterproof (inside and out), so safe and reliable in the rain as well
• CE-certified
• 230 V , 50 – 60 Hz, Euro plug
• Fits tire sizes up to max. 160/60 - 17

• Enables secure attachment to the machine without scratching your handlebars or tank
• With rubberized hooks and handlebar loops on belt ends
• 2 units

• Enables secure attachment to the machine without scratching your handlebars or tank
• Made from durable ballistic nylon
• Load capacity of 280 kg
• With handlebar loops
• With rubberized hooks on both belt ends

• Enables secure fastening to the machine without scratching your handlebars or tank
• Made from durable ballistic nylon
• Load capacity of 280 kg
• With handlebar loops
• With a rubberized hook and a carabiner on the belt ends
• 2 units

• Made from polyester, with special rubberized back
• Gas and oil resistant
• In special KTM design
• Size: 100 x 170 cm

• 10 pcs. cleanig towels, packed separately
• towel size 285 x 200 mm
• 70% Isopropanol
• ideal for cleaning of surfaces before application of stickers

• Set for front and rear wheel
• Pre-cut stickers

• For wheel size 17"
• Pre-cut sticker
• Suitable for front and rear rim

• For wheel size 17"
• Pre-cut sticker
• Suitable for front and rear rim

The seal set contains all the seals you need to repair your cylinder.

This drive kit consists of a 15 tooth front and a 42 tooth rear sprocket wheel, a DID chain and master link.

This drive kit consists of a 16 tooth front and a 40 tooth rear sprocket wheel, a DID chain and master link.

The oil filter kit contains all the filters, sieves, O-rings and seals you need for an oil change.

HeliCoil plus

Spark plug thread repair selection M10x1 / M12x1.25 / M14x1.25.

This shim kit includes all the valve shims you need for setting your valves in a neat box.

(stock photo)