150 SX (2013) POWERPARTS & ACCESSORIES

77206920100

Lagerstatus: 3
Pris: 117kr
PowerParts|Airfilter
Air filter dust protection

This large-pore air filter cover acts as an additional protective layer, hence extending the filter service interval. Recommended in extremely dusty conditions.

<p>This large-pore air filter cover acts as an additional protective layer, hence extending the filter service interval. Recommended in extremely dusty conditions. </p> dölj mer info

59006922000

Lagerstatus: hos lev.
Pris: 199kr
PowerParts|Airfilter
Air filter sand protection
Recommended for use on sandy tracks. Installation together with oiled air filter and dry dust guard 77206920100.
Recommended for use on sandy tracks. Installation together with oiled air filter and dry dust guard 77206920100. dölj mer info

77206921100

Lagerstatus: 2
Pris: 117kr
PowerParts|Airfilter
Air filter water protection

Recommended in extremely wet conditions.

<p>Recommended in extremely wet conditions. </p> dölj mer info

5841301564404

Lagerstatus: 3
Pris: 7395kr
PowerParts|Brakes|Brake calliper
4 piston brake caliper
KTM brake calipers are distinguished by the following features:
  • CNC milled from high-strength solid aluminum
  • Chrome-plated pad guide pins on the brake caliper
  • The benefits:
    • Reduced brake pad canting, hence no uneven wear
    • Constant braking feel, irrespective of brake pad wear or temperature
    • No vibration from the brake

Fitting possible on SX/EXC models without adapter, with the original hand pump and brake hose.
Can only be fitted with a 17"or 16.5" front wheel. 310 mm brake disc 586.09.060.000 or 250.09.260.000 required.
In combination with brake disc 25009260000 (310 mm) no speedometer signal will be sent.

KTM brake calipers are distinguished by the following features:<br /><ul><li class="li-square">CNC milled from high-strength solid aluminum</li><li class="li-square">Chrome-plated pad guide pins on the brake caliper</li><li class="li-square">The benefits:<br /><ul><li class="li-disc">Reduced brake pad canting, hence no uneven wear</li><li class="li-disc">Constant braking feel, irrespective of brake pad wear or temperature</li><li class="li-disc">No vibration from the brake</li></ul></li></ul><p>Fitting possible on SX/EXC models without adapter, with the original hand pump and brake hose.<br />Can only be fitted with a 17"or 16.5" front wheel. 310 mm brake disc 586.09.060.000 or 250.09.260.000 required.<br />In combination with brake disc 25009260000 (310 mm) no speedometer signal will be sent.</p> dölj mer info

5941301504404

Lagerstatus: 1
Pris: 10995kr
PowerParts|Brakes|Brake calliper
6 piston brake caliper
KTM brake calipers are distinguished by the following features:
  • CNC-milled from high-strength solid aluminum
  • Chrome-plated pad guide pins on the brake caliper
  • The benefits:
    • Reduced brake pad canting, hence no uneven wear
    • Constant braking feel, irrespective of brake pad wear or temperature
    • No vibration from the brake

We recommend use of hand pump 587.13.001.100 and brake hose 594.13.011.000 (SX) or 800.13.011.000 (EXC).
Can only be fitted with a 17" or 16.5" front wheel. 310 mm brake disc 586.09.060.000 or 250.09.260.000 required.
In combination with brake disc 25009260000 (310 mm) no speedometer signal will be sent.

KTM brake calipers are distinguished by the following features:<br /><ul><li class="li-square">CNC-milled from high-strength solid aluminum</li><li class="li-square">Chrome-plated pad guide pins on the brake caliper</li><li class="li-square">The benefits:<br /><ul><li class="li-disc">Reduced brake pad canting, hence no uneven wear</li><li class="li-disc">Constant braking feel, irrespective of brake pad wear or temperature</li><li class="li-disc">No vibration from the brake</li></ul></li></ul><p>We recommend use of hand pump 587.13.001.100 and brake hose 594.13.011.000 (SX) or 800.13.011.000 (EXC).<br />Can only be fitted with a 17" or 16.5" front wheel. 310 mm brake disc 586.09.060.000 or 250.09.260.000 required.<br />In combination with brake disc 25009260000 (310 mm) no speedometer signal will be sent.</p> dölj mer info

77713975120

Lagerstatus: hos lev.
Pris: 1155kr
PowerParts|Brakes|Brake calliper
Brake caliper protection
  • Manufactured from carbon
  • Optimum protection against stone impacts
  • Can be installed on brake caliper supports 7771397501030, 7771397511030, 78113975044, 78113975144, 78113975244, 78913975044 or 78913975144
<ul><li class="li-square">Manufactured from carbon</li><li class="li-square">Optimum protection against stone impacts</li><li class="li-square">Can be installed on brake caliper supports 7771397501030, 7771397511030, 78113975044, 78113975144, 78113975244, 78913975044 or 78913975144</li></ul> dölj mer info

SXS09125512

Lagerstatus: hos lev.
Pris: 12695kr
PowerParts|Brakes|Brake calliper
Factory brake caliper
The Factory brake caliper is manufactured from high-strength aluminium, which makes it stiffer without adding any weight. The increased stiffness of the brake calliper results in a more precise pressure point and improved brake power.
The Factory brake caliper is manufactured from high-strength aluminium, which makes it stiffer without adding any weight. The increased stiffness of the brake calliper results in a more precise pressure point and improved brake power. dölj mer info

SXS07125712

Lagerstatus: hos lev.
Pris: 12095kr
PowerParts|Brakes|Brake calliper
Factory brake caliper
The factory-brake calliper is manufactured from high-strength aluminium, which makes it stiffer without adding any weight. The increased stiffness of the brake calliper results in a more precise pressure point and improved brake power. When fitting to SX models as of MY 2013, the CNC brake calliper support (7771397511030) must be used instead of the supplied brake calliper support due to the larger axle diameter.
The factory-brake calliper is manufactured from high-strength aluminium, which makes it stiffer without adding any weight. The increased stiffness of the brake calliper results in a more precise pressure point and improved brake power. When fitting to SX models as of MY 2013, the CNC brake calliper support (7771397511030) must be used instead of the supplied brake calliper support due to the larger axle diameter. dölj mer info

5941300100004

Lagerstatus: hos lev.
Pris: 7995kr
PowerParts|Brakes|Brake cylinder
Brake cylinder
The radial hand brake cylinder with 12 mm piston enables better leverage than conventional brake cylinders and is designed for offroad and supermoto models. CNC-machined from solid material and weighing in at only 305 g, it is extremely compact and very light. The short lever can be easily adjusted and delivers an extraordinarily precise feeling when applying the brakes. Ideal for use in combination with the 4-piston brake caliper 584.13.015.644/04 or the 6-piston brake caliper 594.13.015.044/04.
The radial hand brake cylinder with 12 mm piston enables better leverage than conventional brake cylinders and is designed for offroad and supermoto models. CNC-machined from solid material and weighing in at only 305 g, it is extremely compact and very light. The short lever can be easily adjusted and delivers an extraordinarily precise feeling when applying the brakes. Ideal for use in combination with the 4-piston brake caliper 584.13.015.644/04 or the 6-piston brake caliper 594.13.015.044/04. dölj mer info

57313001000

Lagerstatus: hos lev.
Pris: 4595kr
PowerParts|Brakes|Brake cylinder
Radial brake cylinder
The radial hand brake cylinder with 16 mm piston enables better leverage than conventional brake cylinders. The benefit: You need significantly less hand strength, can ride a larger piston and thus be supplied with a much better feeling for applying the brakes. Required for mounting: Brake fluid reservoir 545.13.030.044 and the associated retaining bracket 573.13.001.050.
The radial hand brake cylinder with 16 mm piston enables better leverage than conventional brake cylinders. The benefit: You need significantly less hand strength, can ride a larger piston and thus be supplied with a much better feeling for applying the brakes. Required for mounting: Brake fluid reservoir 545.13.030.044 and the associated retaining bracket 573.13.001.050. dölj mer info

58309060000

Lagerstatus: hos lev.
Pris: 2175kr
PowerParts|Brakes|Brake Discs
Brake disc
  • Extra large for extra-high brake power
  • Manufactured from special high-grade stainless steel
  • Can only be used in conjunction with standard installed brake caliper, and the brake caliper support 58413014000 or 77013914000 is therefore required for this
<ul><li class="li-square">Extra large for extra-high brake power</li><li class="li-square">Manufactured from special high-grade stainless steel</li><li class="li-square">Can only be used in conjunction with standard installed brake caliper, and the brake caliper support 58413014000 or 77013914000 is therefore required for this</li></ul> dölj mer info

77709160000

Lagerstatus: hos lev.
Pris: 2185kr
PowerParts|Brakes|Brake Discs
Brake disc
  • Floating brake disc manufactured from special high-grade stainless steel
  • Internal ring made from special high-grade stainless steel
  • Minimal wear on brake linings
<ul><li class="li-square">Floating brake disc manufactured from special high-grade stainless steel</li><li class="li-square">Internal ring made from special high-grade stainless steel</li><li class="li-square">Minimal wear on brake linings</li></ul> dölj mer info

78910960000

Lagerstatus: hos lev.
Pris: 1140kr
PowerParts|Brakes|Brake Discs
Flame brake disc
  • Manufactured from special high-grade stainless steel
  • Extra thick - i.e. 4.6 mm!
  • Potential fading of the brake is virtually completely excluded
  • Significantly longer lasting
  • With Flame design for added braking performance
  • Minimal wear on brake linings
<ul><li>Manufactured from special high-grade stainless steel</li><li>Extra thick - i.e. 4.6 mm!</li><li>Potential fading of the brake is virtually completely excluded</li><li>Significantly longer lasting</li><li>With Flame design for added braking performance</li><li>Minimal wear on brake linings</li></ul> dölj mer info

78110960000

Lagerstatus: hos lev.
Pris: 1155kr
PowerParts|Brakes|Brake Discs
Flame brake disc
  • Manufactured from special high-grade stainless steel
  • With Flame design for added braking performance
  • Minimal wear on brake linings
<ul><li>Manufactured from special high-grade stainless steel</li><li>With Flame design for added braking performance</li><li>Minimal wear on brake linings</li></ul> dölj mer info

78109960000

Lagerstatus: 2
Pris: 1855kr
PowerParts|Brakes|Brake Discs
Flame brake disc
  • Floating brake disc manufactured from special high-grade stainless steel
  • With Flame design for added braking performance
  • Minimal wear on brake linings
<ul><li>Floating brake disc manufactured from special high-grade stainless steel</li><li>With Flame design for added braking performance</li><li>Minimal wear on brake linings</li></ul> dölj mer info

78909960000

Lagerstatus: hos lev.
Pris: 1735kr
PowerParts|Brakes|Brake Discs
Flame brake disc
  • Floating brake disc manufactured from special high-grade stainless steel
  • Internal ring made from high-grade aluminum
  • With Flame design for added braking performance
  • Minimal wear on brake linings
  • The brake caliper support 78913914100 is required for mounting
<ul><li>Floating brake disc manufactured from special high-grade stainless steel</li><li>Internal ring made from high-grade aluminum</li><li>With Flame design for added braking performance</li><li>Minimal wear on brake linings</li><li>The brake caliper support 78913914100 is required for mounting</li></ul> dölj mer info

58409060200

Lagerstatus: 1
Pris: 3095kr
PowerParts|Brakes|Brake Discs
Wave brake disc
Floating, stainless steel brake disc. The inner ring is made of aluminum to save weight. The pressure point doesn’t change, even when subjected to extreme temperatures and forces. Please note: Combination with 58413014000 not possible! Not for use with 2-piston Brembo® brake caliper.
Floating, stainless steel brake disc. The inner ring is made of aluminum to save weight. The pressure point doesn’t change, even when subjected to extreme temperatures and forces. Please note: Combination with 58413014000 not possible! Not for use with 2-piston Brembo® brake caliper. dölj mer info

25010960000

Lagerstatus: 1
Pris: 1155kr
PowerParts|Brakes|Brake Discs
Wave brake disc
The full equipment level for muddy track conditions minimizes the brake lining wear.
The full equipment level for muddy track conditions minimizes the brake lining wear. dölj mer info

25009260000

Lagerstatus: hos lev.
Pris: 2845kr
PowerParts|Brakes|Brake Discs
Wave brake disc
  • Floating brake disc manufactured from special high-grade stainless steel
  • Internal ring made from high-grade aluminum
  • With Wave design for added braking performance
  • Minimal wear on brake pads
  • Can only be used in conjunction with 4 piston brake caliper 5841301564404 or 6 piston brake caliper 5941301504404
  • In combination with 4 piston brake caliper 58413015644/04 no speedometer signal will be sent
<ul><li class="li-disc">Floating brake disc manufactured from special high-grade stainless steel</li><li class="li-disc">Internal ring made from high-grade aluminum</li><li class="li-disc">With Wave design for added braking performance</li><li class="li-disc">Minimal wear on brake pads</li><li class="li-disc">Can only be used in conjunction with 4 piston brake caliper 5841301564404 or 6 piston brake caliper 5941301504404</li><li class="li-disc">In combination with 4 piston brake caliper 58413015644/04 no speedometer signal will be sent</li></ul> dölj mer info

54813990200

Lagerstatus: 3
Pris: 455kr
PowerParts|Brakes|Brake Pads
Brake pad
  • 100% sintered metals
  • Very high coefficient of friction for maximum and enduring braking power
  • Low "fading" tendency when hot
  • Very effective braking in the wet as well
  • Very hard and therefore extremely long-lasting
  • Particularly beneficial in extreme conditions (e.g. sand, gravel, etc.)
<ul><li class="li-square">100% sintered metals</li><li class="li-square">Very high coefficient of friction for maximum and enduring braking power</li><li class="li-square">Low "fading" tendency when hot</li><li class="li-square">Very effective braking in the wet as well</li><li class="li-square">Very hard and therefore extremely long-lasting</li><li class="li-square">Particularly beneficial in extreme conditions (e.g. sand, gravel, etc.)</li></ul> dölj mer info

54813990100

Lagerstatus: 4
Pris: 315kr
PowerParts|Brakes|Brake Pads
Brake pad
  • Made from a special material mix with a high proportion of organic substances, therefore softer
  • With ceramic underlayer for optimum thermal insulation
  • Lower friction coefficient than sintered brake pads, so less aggressive braking feel
  • Beneficial when particularly refined responsiveness is desired for ideal brake application
<ul><li class="li-square">Made from a special material mix with a high proportion of organic substances, therefore softer</li><li class="li-square">With ceramic underlayer for optimum thermal insulation</li><li class="li-square">Lower friction coefficient than sintered brake pads, so less aggressive braking feel</li><li class="li-square">Beneficial when particularly refined responsiveness is desired for ideal brake application</li></ul> dölj mer info

59013930200

Lagerstatus: 3
Pris: 455kr
PowerParts|Brakes|Brake Pads
Brake pad
  • 100% sintered metals
  • Very high coefficient of friction for maximum and enduring braking power
  • Low "fading" tendency when hot
  • Very effective braking in the wet as well
  • Very hard and therefore extremely long-lasting
  • Particularly beneficial in extreme conditions (e.g. sand, gravel, etc.)
<ul><li class="li-square">100% sintered metals</li><li class="li-square">Very high coefficient of friction for maximum and enduring braking power</li><li class="li-square">Low "fading" tendency when hot</li><li class="li-square">Very effective braking in the wet as well</li><li class="li-square">Very hard and therefore extremely long-lasting</li><li class="li-square">Particularly beneficial in extreme conditions (e.g. sand, gravel, etc.)</li></ul> dölj mer info

59013930100

Lagerstatus: 4
Pris: 315kr
PowerParts|Brakes|Brake Pads
Brake pad
  • Made from a special material mix with a high proportion of organic substances, therefore softer
  • With ceramic underlayer for optimum thermal insulation
  • Lower friction coefficient than sintered brake pads, so less aggressive braking feel
  • Beneficial when particularly refined responsiveness is desired for ideal brake application
<ul><li class="li-square">Made from a special material mix with a high proportion of organic substances, therefore softer</li><li class="li-square">With ceramic underlayer for optimum thermal insulation</li><li class="li-square">Lower friction coefficient than sintered brake pads, so less aggressive braking feel </li><li class="li-square">Beneficial when particularly refined responsiveness is desired for ideal brake application</li></ul> dölj mer info

77013920100

Lagerstatus: 1
Pris: 575kr
PowerParts|Brakes|Special parts
Banjo bolt with bleeder function
Bleeding the brakes or changing the brake fluid is completed in a matter of seconds, even on your own: First replace the original bleeder screw on the brake caliper with this new bleeder screw equipped with a check valve. When changing the brake fluid or bleeding the system, simply release the screw on the check valve by a half turn and pump the brake fluid through the system with the brake lever. The valve prevents air from forcing its way back into the system on releasing the brake lever. Supplied with an anodized dust cap.
Bleeding the brakes or changing the brake fluid is completed in a matter of seconds, even on your own: First replace the original bleeder screw on the brake caliper with this new bleeder screw equipped with a check valve. When changing the brake fluid or bleeding the system, simply release the screw on the check valve by a half turn and pump the brake fluid through the system with the brake lever. The valve prevents air from forcing its way back into the system on releasing the brake lever. Supplied with an anodized dust cap. dölj mer info

78013920000

Lagerstatus: 2
Pris: 525kr
PowerParts|Brakes|Special parts
Brake bleeder screw
Bleeding the brakes or changing the brake fluid is completed in a matter of seconds, even on your own: First replace the original bleeder screw on the brake caliper with this new bleeder screw equipped with a check valve. When changing the brake fluid or bleeding the system, simply release the screw on the check valve by a half turn and pump the brake fluid through the system with the brake lever. The valve prevents air from forcing its way back into the system on releasing the brake lever. Supplied with an anodized dust cap. Suitable for the front brake caliper.
Bleeding the brakes or changing the brake fluid is completed in a matter of seconds, even on your own: First replace the original bleeder screw on the brake caliper with this new bleeder screw equipped with a check valve. When changing the brake fluid or bleeding the system, simply release the screw on the check valve by a half turn and pump the brake fluid through the system with the brake lever. The valve prevents air from forcing its way back into the system on releasing the brake lever. Supplied with an anodized dust cap. Suitable for the front brake caliper. dölj mer info

7771397511030

Lagerstatus: hos lev.
Pris: 1155kr
PowerParts|Brakes|Special parts
Brake caliper support
Lighter and stiffer than the standard brake caliper support. The stiffness has a positive effect on such braking properties as braking power and application. CNC-machined from highest grade aluminum and black anodized.
Available as an option: Carbon brake caliper protection 77713975120 and carbon brake disc protection 77713975030.
<div class="gs01l">Lighter and stiffer than the standard brake caliper support. The stiffness has a positive effect on such braking properties as braking power and application. CNC-machined from highest grade aluminum and black anodized.<br />Available as an option: Carbon brake caliper protection 77713975120 and carbon brake disc protection 77713975030.</div> dölj mer info

77013914000

Lagerstatus: hos lev.
Pris: 1155kr
PowerParts|Brakes|Special parts
Brake caliper support
  • Required when installing brake disc 58309060000
<ul><li class="li-square">Required when installing brake disc 58309060000</li></ul> dölj mer info

78913914100

Lagerstatus: 2
Pris: 925kr
PowerParts|Brakes|Special parts
Brake caliper support
Required for using the 270 mm brake disc 78909960000 and 2-piston Brembo brake caliper.
Required for using the 270 mm brake disc 78909960000 and 2-piston Brembo brake caliper. dölj mer info

78913975144

Lagerstatus: hos lev.
Pris: 1855kr
PowerParts|Brakes|Special parts
Brake caliper support with brake disc guard
The integrated brake disc guard protects the rear brake disc during a camber or in the heat of battle from rocks or other fixed obstacles. The brake caliper support is lighter and stiffer than the installed standard unit. The stiffness has a positive effect on braking characteristics such as braking power and modulation. CNC machined from the highest quality aluminum and anodized in black and orange. Optionally available: Carbon composite brake caliper guard 77713975120
The integrated brake disc guard protects the rear brake disc during a camber or in the heat of battle from rocks or other fixed obstacles. The brake caliper support is lighter and stiffer than the installed standard unit. The stiffness has a positive effect on braking characteristics such as braking power and modulation. CNC machined from the highest quality aluminum and anodized in black and orange. Optionally available: Carbon composite brake caliper guard 77713975120 dölj mer info

7800906110030

Lagerstatus: 1
Pris: 645kr
PowerParts|Brakes|Special parts
Brake disc guard
Very practical: The intelligent fitting system with a central adapter replaces the spacer sleeve on the wheel axle and allows the tire to be changed, brake to be serviced, etc., without removing the brake cover.
Very practical: The intelligent fitting system with a central adapter replaces the spacer sleeve on the wheel axle and allows the tire to be changed, brake to be serviced, etc., without removing the brake cover. dölj mer info

77713975030

Lagerstatus: hos lev.
Pris: 1155kr
PowerParts|Brakes|Special parts
Brake disc guard
Protects the rear brake disc from stones and other solid objects in the event of a crash or in the heat of battle. Can be fitted on the CNC brake calliper support 77713975010/30 or 77713975110/30.
Protects the rear brake disc from stones and other solid objects in the event of a crash or in the heat of battle. Can be fitted on the CNC brake calliper support 77713975010/30 or 77713975110/30. dölj mer info

50313082200

Lagerstatus: hos lev.
Pris: 117kr
PowerParts|Brakes|Special parts
Brake pad retaining pin
Lost pins are a thing of the past. With these bolts, changing brake pads is possible even in difficult conditions: quickly and simply!
Lost pins are a thing of the past. With these bolts, changing brake pads is possible even in difficult conditions: quickly and simply! dölj mer info

54812063044

Lagerstatus: 2
Pris: 117kr
PowerParts|Brakes|Special parts
Rear brake safety wire

Prevents twigs being caught between the engine and the foot brake lever and the foot brake lever being bent or blocked by this.

<p>Prevents twigs being caught between the engine and the foot brake lever and the foot brake lever being bent or blocked by this.</p> dölj mer info

SXS11450100

Lagerstatus: hos lev.
Pris: 505kr
PowerParts|Carbon|Offroad
Carbon fuel tap guard
DO YOU KNOW about the special properties of carbon?
  • Extremely light: about 80% lighter than steel with the same load-bearing capacity
  • Very stable: 4 times more resilient than aluminum
  • Ultimate stiffness and strength
  • Free from corrosion
  • High continuous temperature resistance
  • Low thermal expansion
  • And, last but not least, a cool look
    Pimp your KTM with carbon components from KTM PowerParts - they save weight and look great.
Prevents inadvertent actuation of the fuel tap.
DO YOU KNOW about the special properties of carbon?<ul><li class="li-disc"> Extremely light: about 80% lighter than steel with the same load-bearing capacity</li><li class="li-disc"> Very stable: 4 times more resilient than aluminum</li><li class="li-disc"> Ultimate stiffness and strength</li><li class="li-disc"> Free from corrosion</li><li class="li-disc"> High continuous temperature resistance</li><li class="li-disc"> Low thermal expansion</li><li class="li-disc"> And, last but not least, a cool look<br />Pimp your KTM with carbon components from KTM PowerParts - they save weight and look great.</li></ul>Prevents inadvertent actuation of the fuel tap. dölj mer info

7900199400049

Lagerstatus: hos lev.
Pris: 1385kr
PowerParts|Carbon|Offroad
Fork protector kit
Optimum protection against roost. Made to fit all 48 mm forks.
Optimum protection against roost. Made to fit all 48 mm forks. dölj mer info

50310165118

Lagerstatus: hos lev.
Pris: 925kr
PowerParts|Chains/Sprockets|Chains
Chain
Sometimes less can mean more! O and Z-rings have been dispensed with completely on this chain specially developed for motocross use. That and the special construction of the bearing bushes result in the perfect compromise between durability and minimum power loss.
Sometimes less can mean more! O and Z-rings have been dispensed with completely on this chain specially developed for motocross use. That and the special construction of the bearing bushes result in the perfect compromise between durability and minimum power loss. dölj mer info

5031016511804

Lagerstatus: 1
Pris: 1155kr
PowerParts|Chains/Sprockets|Chains
Chain
Sometimes less can mean more! O and Z-rings have been dispensed with completely on this chain specially developed for motocross use. That and the special construction of the bearing bushes result in the perfect compromise between durability and minimum power loss.
Sometimes less can mean more! O and Z-rings have been dispensed with completely on this chain specially developed for motocross use. That and the special construction of the bearing bushes result in the perfect compromise between durability and minimum power loss. dölj mer info

78010167118

Lagerstatus: 1
Pris: 1265kr
PowerParts|Chains/Sprockets|Chains
X-ring chain
DO YOU KNOW about the differences and benefits of a Z-ring or X-ring chain compared with an O-ring chain?
  • The Z-ring or X-ring has 4 contact points in contrast to 2 contact points with the O-ring version
  • This means higher flexibility and better running characteristics for the Z-ring or X-ring chain
  • The spring effect of the Z-ring or X-ring guarantees consistent and permanent lubrication
  • This means a significantly longer service life for the Z-ring or X-ring chain
  • The Z-ring or X-ring provides a better seal against penetration by water and dirt
DO YOU KNOW about the differences and benefits of a Z-ring or X-ring chain compared with an O-ring chain?<ul><li class="li-disc"> The Z-ring or X-ring has 4 contact points in contrast to 2 contact points with the O-ring version</li><li class="li-disc"> This means higher flexibility and better running characteristics for the Z-ring or X-ring chain</li><li class="li-disc"> The spring effect of the Z-ring or X-ring guarantees consistent and permanent lubrication </li><li class="li-disc"> This means a significantly longer service life for the Z-ring or X-ring chain </li><li class="li-disc"> The Z-ring or X-ring provides a better seal against penetration by water and dirt</li></ul> dölj mer info

79610965118EB

Lagerstatus: 1
Pris: 1505kr
PowerParts|Chains/Sprockets|Chains
XW-ring chain
  • higher flexibility and better running characteristics
  • consistent and permanent lubrication
  • better seal against water and dirt
  • significantly longer service life
<ul><li class="li-square">higher flexibility and better running characteristics</li><li class="li-square">consistent and permanent lubrication</li><li class="li-square">better seal against water and dirt</li><li class="li-square">significantly longer service life</li></ul> dölj mer info

7720305300004

Lagerstatus: 2
Pris: 199kr
PowerParts|Chains/Sprockets|Special Parts
Chain slider
In orange factory look.
<div class="gs01l">In orange factory look.</div> dölj mer info

7900305300004

Lagerstatus: hos lev.
Pris: 199kr
PowerParts|Chains/Sprockets|Special Parts
Chain slider

In orange Factory look.

<p>In orange Factory look.</p> dölj mer info

7720406610004

Lagerstatus: 2
Pris: 255kr
PowerParts|Chains/Sprockets|Special Parts
Chain sliding protection
In orange factory look.
In orange factory look. dölj mer info

7810497000004

Lagerstatus: hos lev.
Pris: 1385kr
PowerParts|Chains/Sprockets|Special Parts
Chainguide
The TM Designworks chain guide, as used by the KTM Factory Team:
  • CNC-machined from Teflon
  • With replaceable chain running surface, hence extremely durable
  • Specially designed for the challenges of offroad use
Pay attention to clearance when used in combination with a 2K chain guide. The chain guide may need to be adapted accordingly.
The TM Designworks chain guide, as used by the KTM Factory Team: <ul><li class="li-disc"> CNC-machined from Teflon</li><li class="li-disc"> With replaceable chain running surface, hence extremely durable</li><li class="li-disc"> Specially designed for the challenges of offroad use</li></ul>Pay attention to clearance when used in combination with a 2K chain guide. The chain guide may need to be adapted accordingly. dölj mer info

7810407010004

Lagerstatus: hos lev.
Pris: 285kr
PowerParts|Chains/Sprockets|Special Parts
Chainguide
In orange factory look.
<div class="gs01l">In orange factory look.</div> dölj mer info

78104974100

Lagerstatus: hos lev.
Pris: 925kr
PowerParts|Chains/Sprockets|Special Parts
Chainguide bracket protection
Chain protection out of aluminium replacing stock plastic one.
Chain protection out of aluminium replacing stock plastic one. dölj mer info

7771015104901

Lagerstatus: 2
Pris: 425kr
PowerParts|Chains/Sprockets|Sprockets
Rear sprocket
  • Manufactured from high-strength 7075-T6 aluminum - the world's strongest aluminum
<ul><li class="li-disc">Manufactured from high-strength 7075-T6 aluminum - the world's strongest aluminum</li></ul> dölj mer info

7771095105204

Lagerstatus: 1
Pris: 645kr
PowerParts|Chains/Sprockets|Sprockets
Rear sprocket
  • Manufactured from high-strength 7075-T6 aluminum, the strongest aluminum in the world
  • Originally developed for the aerospace industry and then adopted by the best rear sprocket manufacturer
  • The chain runs smoothly, straigt as a die and true, because it`s ground level to an accuracy of 0.002mm
  • Free from vibration - therefore the highest power transmission efficiency
  • Orange anodized with a permanent, organic and environmentally friendly pigment
<ul><li class="li-square">Manufactured from high-strength 7075-T6 aluminum, the strongest aluminum in the world</li><li class="li-square">Originally developed for the aerospace industry and then adopted by the best rear sprocket manufacturer</li><li class="li-square">The chain runs smoothly, straigt as a die and true, because it`s ground level to an accuracy of 0.002mm</li><li class="li-square">Free from vibration - therefore the highest power transmission efficiency</li><li class="li-square">Orange anodized with a permanent, organic and environmentally friendly pigment</li></ul> dölj mer info

58210951052

Lagerstatus: 1
Pris: 340kr
PowerParts|Chains/Sprockets|Sprockets
Rear sprocket
For longer trips, we recommend this extremely low-wear, QStE 460 steel sprocket.
For longer trips, we recommend this extremely low-wear, QStE 460 steel sprocket. dölj mer info

5841005104104

Lagerstatus: hos lev.
Pris: 760kr
PowerParts|Chains/Sprockets|Sprockets
Supersprox stealth rear sprocket
  • High-strength alloy steel teeth for extra long life
  • Aluminum center section reduces the unsprung mass
  • Permanently joined together with high-tensile rivets
  • At least three times longer service life than any other aluminum rear sprockets
  • 50% lighter than conventional steel sprockets

Further advantages: Longer service life of the entire drive train kit

<ul><li class="li-square">High-strength alloy steel teeth for extra long life</li><li class="li-square">Aluminum center section reduces the unsprung mass</li><li class="li-square">Permanently joined together with high-tensile rivets</li><li class="li-square">At least three times longer service life than any other aluminum rear sprockets</li><li class="li-square">50% lighter than conventional steel sprockets</li></ul><p>Further advantages: Longer service life of the entire drive train kit</p> dölj mer info

5841005105204

Lagerstatus: hos lev.
Pris: 760kr
PowerParts|Chains/Sprockets|Sprockets
Supersprox stealth rear sprocket
If you are looking for the highest quality and performance, this rear sprocket is just the thing for you!
  • High-strength alloy steel teeth for extra long life
  • Aluminum center section reduces the unsprung mass
  • Permanently joined together with high-tensile rivets
  • At least three times longer service life than any other aluminum rear sprockets
  • 50% lighter than conventional steel sprockets

Further advantages: Longer service life of the entire drive train kit

Manufactured exclusively for KTM by Supersprox. This product is protected by the following patents in the EU and the US. EU Patent # EP1573234. US Patent # 7.481.729. Patent holder Supersprox a.s.

If you are looking for the highest quality and performance, this rear sprocket is just the thing for you!<ul><li class="li-disc">High-strength alloy steel teeth for extra long life</li><li class="li-disc">Aluminum center section reduces the unsprung mass</li><li class="li-disc">Permanently joined together with high-tensile rivets</li><li class="li-disc">At least three times longer service life than any other aluminum rear sprockets</li><li class="li-disc">50% lighter than conventional steel sprockets</li></ul><p>Further advantages: Longer service life of the entire drive train kit</p><p>Manufactured exclusively for KTM by Supersprox. This product is protected by the following patents in the EU and the US. EU Patent # EP1573234. US Patent # 7.481.729. Patent holder Supersprox a.s.</p> dölj mer info

SXS05450210

Lagerstatus: 4
Pris: 290kr
PowerParts|CNC Parts anodized|Chassis
Brake cylinder and clutch reservoir cover
Installation possible with all Brembo® brake and clutch master cylinders.
Installation possible with all Brembo® brake and clutch master cylinders. dölj mer info

SXS08300040

Lagerstatus: hos lev.
Pris: 455kr
PowerParts|CNC Parts anodized|Chassis
Factory adjuster wheel set
DID YOU KNOW that all KTM CNC parts are manufactured from high grade aluminum, which not only looks great but can also stand up to the toughest loads? The original factory look, anodized aluminum PowerParts are just the thing to give your KTM that something special.

Not suitable for air forks.

DID YOU KNOW that all KTM CNC parts are manufactured from high grade aluminum, which not only looks great but can also stand up to the toughest loads? The original factory look, anodized aluminum PowerParts are just the thing to give your KTM that something special.<p>Not suitable for air forks.</p> dölj mer info

U6951010

Lagerstatus: 4
Pris: 117kr
PowerParts|CNC Parts anodized|Chassis
Factory fuel cap vent
DO YOU KNOW that all KTM CNC parts are manufactured from highest quality aluminum and therefore not only look good, they also withstand the toughest treatment? With the anodized aluminum components in the original factory look from the PowerParts range, you can turn your KTM into something very special.
DO YOU KNOW that all KTM CNC parts are manufactured from highest quality aluminum and therefore not only look good, they also withstand the toughest treatment? With the anodized aluminum components in the original factory look from the PowerParts range, you can turn your KTM into something very special. dölj mer info

U6951981

Lagerstatus: 3
Pris: 255kr
PowerParts|CNC Parts anodized|Chassis
Footbrake cylinder cover
DO YOU KNOW that all KTM CNC parts are manufactured from highest quality aluminum and therefore not only look good, they also withstand the toughest treatment? With the anodized aluminum components in the original factory look from the PowerParts range, you can turn your KTM into something very special.
DO YOU KNOW that all KTM CNC parts are manufactured from highest quality aluminum and therefore not only look good, they also withstand the toughest treatment? With the anodized aluminum components in the original factory look from the PowerParts range, you can turn your KTM into something very special. dölj mer info

54813960050

Lagerstatus: hos lev.
Pris: 240kr
PowerParts|CNC Parts anodized|Chassis
Footbrake cylinder extender
  • Increases the volume of the foot brake cylinder
  • The additional cooling ribs minimize the heat-up of the brake fluid
  • Eliminates dreaded “fading” almost completely
  • Space requirements: Total height including cover approximately 40.5 mm
<ul><li class="li-square">Increases the volume of the foot brake cylinder</li><li class="li-square">The additional cooling ribs minimize the heat-up of the brake fluid</li><li class="li-square">Eliminates dreaded “fading” almost completely</li><li class="li-square">Space requirements: Total height including cover approximately 40.5 mm</li></ul> dölj mer info

54813951100

Lagerstatus: 1
Pris: 575kr
PowerParts|CNC Parts anodized|Chassis
Footbrake lever step plate
7 mm wider contact surface than standard.
7 mm wider contact surface than standard. dölj mer info

77734931144

Lagerstatus: 1
Pris: 575kr
PowerParts|CNC Parts anodized|Chassis
Gear shift lever step plate
dölj mer info

79430920044

Lagerstatus: 8
Pris: 230kr
PowerParts|CNC Parts anodized|Engine
Oil plug

These high-quality aluminum CNC components feature a superior abrasion-resistant eloxal coating and make a bold visual statement.

<p>These high-quality aluminum CNC components feature a superior abrasion-resistant eloxal coating and make a bold visual statement.</p> dölj mer info

51535924044

Lagerstatus: hos lev.
Pris: 995kr
PowerParts|Cooling|Hoses
Radiator hose
For a higher level of performance and appearance! These reinforced silicon-rubber cooling hoses have been specially developed to withstand extreme pressures and temperatures. The special surface of their rubber compound has also improved the flow behavior.
For a higher level of performance and appearance! These reinforced silicon-rubber cooling hoses have been specially developed to withstand extreme pressures and temperatures. The special surface of their rubber compound has also improved the flow behavior. dölj mer info

54835980000

Lagerstatus: 11
Pris: 69kr
PowerParts|Cooling|Protection
Foam rubber
For extremely muddy conditions. Prevents the radiator from becoming clogged with mud and the engine from overheating.
For extremely muddy conditions. Prevents the radiator from becoming clogged with mud and the engine from overheating. dölj mer info

77735936244

Lagerstatus: hos lev.
Pris: 1505kr
PowerParts|Cooling|Protection
Radiator protection
Perfect protection for the radiator; easily fitted.
Perfect protection for the radiator; easily fitted. dölj mer info

7733503400028

Lagerstatus: 4
Pris: 93kr
PowerParts|Cooling|Protection
Radiator protection
Suitable for the left and right side.
Suitable for the left and right side. dölj mer info

78135936100

Lagerstatus: 1
Pris: 1155kr
PowerParts|Cooling|Protection
Radiator protection
Perfect protection for the radiator; easily fitted.
Perfect protection for the radiator; easily fitted. dölj mer info

7733503400030

Lagerstatus: 7
Pris: 93kr
PowerParts|Cooling|Protection
Radiator protection
Suitable for the left and right side.
Suitable for the left and right side. dölj mer info

SXS10150051

Lagerstatus: hos lev.
Pris: 1265kr
PowerParts|Engine|Engine parts, 2-stroke
Factory cylinder head
Specially designed for use on sandy tracks (high thermal loads!). Volume 14.8 ml = less compression (standard: 13.8 ml).
Specially designed for use on sandy tracks (high thermal loads!). Volume 14.8 ml = less compression (standard: 13.8 ml). dölj mer info

SXS13125044

Lagerstatus: hos lev.
Pris: 3095kr
PowerParts|Engine|Engine parts, 2-stroke
Factory cylinder head
The SXS cylinder heads with variable combustion chamber are a must-have for any racer and offer the following properties:
  • Cylinder head separate from combustion chamber
  • Easy modification of the engine characteristic by changing the combustion chamber insert (e.g., from Motocross to Enduro setting)
  • No need to replace the entire cylinder head in case of wear; only the insert needs to be replaced
  • The aluminum alloys used provide improved heat dissipation and thus improved performance gains

To boost your motorcycle's performance even further, we recommend a combination of the factory cylinder heads with the following parts:

  • SXS spark plug
  • SXS digital box
  • factory exhaust system

IMPORTANT:

The carburetor jetting must be adjusted to the selected combustion chamber insert and your vehicle model year (e.g. selected combustion chamber insert = Motocross type; vehicle = 250 EXC model year 09; carburetor jetting to be selected = 250 SX model year 09). The carburetor jettings for models 250 and 300 are identical. When using the "EXTREM" combustion chamber insert, always select the SX carburetor jetting for your vehicle's model year. More information on the carburetor jetting can be obtained from your authorized dealer.

The SXS cylinder heads with variable combustion chamber are a must-have for any racer and offer the following properties:<ul><li class="li-square">Cylinder head separate from combustion chamber</li><li class="li-square">Easy modification of the engine characteristic by changing the combustion chamber insert (e.g., from Motocross to Enduro setting)</li><li class="li-square">No need to replace the entire cylinder head in case of wear; only the insert needs to be replaced</li><li class="li-square">The aluminum alloys used provide improved heat dissipation and thus improved performance gains</li></ul><p>To boost your motorcycle's performance even further, we recommend a combination of the factory cylinder heads with the following parts:</p><ul><li class="li-square">SXS spark plug</li><li class="li-square">SXS digital box</li><li class="li-square">factory exhaust system</li></ul><p>IMPORTANT:</p><p>The carburetor jetting must be adjusted to the selected combustion chamber insert and your vehicle model year (e.g. selected combustion chamber insert = Motocross type; vehicle = 250 EXC model year 09; carburetor jetting to be selected = 250 SX model year 09). The carburetor jettings for models 250 and 300 are identical. When using the "EXTREM" combustion chamber insert, always select the SX carburetor jetting for your vehicle's model year. More information on the carburetor jetting can be obtained from your authorized dealer.</p> dölj mer info

SXS13144081

Lagerstatus: hos lev.
Pris: 1505kr
PowerParts|Engine|Engine parts, 2-stroke
Factory cylinder head combustion chamber insert
  • Specially developed for extreme conditions
  • Manufactured in a purpose developed alloy
  • Enhanced performance from the engine due to the excellent conductivity of the material used with unchanged combustion chamber
  • Reduces unwanted detonations in the cylinder, that in turn has a positive effect on the service life as well as on the performance of the engine
<ul><li class="li-square">Specially developed for extreme conditions</li><li class="li-square">Manufactured in a purpose developed alloy</li><li class="li-square">Enhanced performance from the engine due to the excellent conductivity of the material used with unchanged combustion chamber</li><li class="li-square">Reduces unwanted detonations in the cylinder, that in turn has a positive effect on the service life as well as on the performance of the engine</li></ul> dölj mer info

SXS13144061

Lagerstatus: hos lev.
Pris: 645kr
PowerParts|Engine|Engine parts, 2-stroke
Factory cylinder head combustion chamber insert
  • Specially developed for application in Motocross
  • Made from high-grade aluminum
  • With standard combustion chamber
<ul><li>Specially developed for application in Motocross</li><li>Made from high-grade aluminum</li><li>With standard combustion chamber</li></ul> dölj mer info

SXS02125071

Lagerstatus: hos lev.
Pris: 740kr
PowerParts|Engine|Engine parts, 2-stroke
Factory spark plug
  • Extremely robust spark plug
  • Center electrode tip made of iridium
  • Reinforced ground electrode (against vibration and breakage)
  • Special design with improved anti-sooting characteristic
  • Recommended in combination with factory cylinder heads, factor exhaust systems or factory digital box
<ul><li class="li-square">Extremely robust spark plug</li><li class="li-square">Center electrode tip made of iridium</li><li class="li-square">Reinforced ground electrode (against vibration and breakage)</li><li class="li-square">Special design with improved anti-sooting characteristic</li><li class="li-square">Recommended in combination with factory cylinder heads, factor exhaust systems or factory digital box</li></ul> dölj mer info

50305981000

Lagerstatus: hos lev.
Pris: 6695kr
PowerParts|Exhaust systems|2-Stroke Offroad
Akrapovi? "Slip-on Line"
Akrapovi? silencer - that means years of racing experience, perfect material selection and sports design. Even for 2-strokes! The benefits:
  • Minimal weight
  • Maximum top-end performance
  • Perfectly distributed torque curve
  • Lowest noise level of any 2-stroke silencer
  • Long service life

Combined with the original header, this Akrapovi? silencer is licensed for road use on 2012-16 EXC 2-stroke models (except for the 200 EXC).

Akrapovi? silencer - that means years of racing experience, perfect material selection and sports design. Even for 2-strokes! The benefits:<ul><li class="li-disc">Minimal weight</li><li class="li-disc">Maximum top-end performance</li><li class="li-disc">Perfectly distributed torque curve</li><li class="li-disc">Lowest noise level of any 2-stroke silencer</li><li class="li-disc">Long service life</li></ul><p><strong>Combined with the original header, this Akrapovi? silencer is licensed for road use on 2012-16 EXC 2-stroke models (except for the 200 EXC).</strong></p> dölj mer info

SXS11144501

Lagerstatus: hos lev.
Pris: 3095kr
PowerParts|Exhaust systems|2-Stroke Offroad
Factory expansion chamber
Quality made in Europe. The exhausts developed and manufactured in cooperation with Doma are visually reduced to the bare minimum and hence meet the high standards demanded by KTM factory riders.The benefits:
  • Optimum rideability thanks to a fuller torque curve
  • Minimum weight for maximum power development
  • Manufactured from robust steel
  • Untreated surface for unadulterated factory look
  • Unmistakeable, full sound
We recommend combination with a factory or Six Days silencer for a perfectly tuned and performance-optimized system.
Quality made in Europe. The exhausts developed and manufactured in cooperation with Doma are visually reduced to the bare minimum and hence meet the high standards demanded by KTM factory riders.The benefits:<ul><li class="li-disc">Optimum rideability thanks to a fuller torque curve</li><li class="li-disc">Minimum weight for maximum power development</li><li class="li-disc">Manufactured from robust steel</li><li class="li-disc">Untreated surface for unadulterated factory look</li><li class="li-disc">Unmistakeable, full sound</li></ul>We recommend combination with a factory or Six Days silencer for a perfectly tuned and performance-optimized system. dölj mer info

SXS11125550

Lagerstatus: 1
Pris: 1855kr
PowerParts|Exhaust systems|2-Stroke Offroad
Factory silencer
Doma silencers ("Made in Europe") provide a guaranteed increase in performance throughout the entire rev range and are ideally suited to the sporty silhouette of KTM 2-stroke bikes. They are employed in many official racing series. Additional benefits:
  • Manufactured from highest grade aluminum
  • Full sound yet low noise level
  • Low weight
  • Perfect fit, simple fitting
We recommend combination with a factory pipe for optimum rideability and even better performance.
Doma silencers ("Made in Europe") provide a guaranteed increase in performance throughout the entire rev range and are ideally suited to the sporty silhouette of KTM 2-stroke bikes. They are employed in many official racing series. Additional benefits:<ul><li class="li-disc">Manufactured from highest grade aluminum</li><li class="li-disc">Full sound yet low noise level</li><li class="li-disc">Low weight</li><li class="li-disc">Perfect fit, simple fitting</li></ul>We recommend combination with a factory pipe for optimum rideability and even better performance. dölj mer info

SXS11144500

Lagerstatus: hos lev.
Pris: 3495kr
PowerParts|Exhaust systems|2-Stroke Offroad
FMF Fatty expansion chamber
  • Made from high quality, extra strong and durable sheet steel
  • Nickel-plated surface
  • Wide, even rev band
  • High rev speed
  • More traction and better control under full throttle
  • Including O-rings
  • Recommended in combination with an FMF silencer for a perfectly matched full system with optimum performance
<ul><li>Made from high quality, extra strong and durable sheet steel</li><li>Nickel-plated surface</li><li>Wide, even rev band</li><li>High rev speed</li><li>More traction and better control under full throttle</li><li>Including O-rings</li><li>Recommended in combination with an FMF silencer for a perfectly matched full system with optimum performance</li></ul> dölj mer info

SXS11150550

Lagerstatus: hos lev.
Pris: 2205kr
PowerParts|Exhaust systems|2-Stroke Offroad
FMF Powercore 2 silencer
  • Outer sleeve manufactured from high-grade aluminum
  • Full sound despite low noise level
  • Light weight
  • Perfect fit
  • Easy to install
  • Recommended in combination with a FMF Fatty pipe for a perfectly matched full system with optimum performance
  • Specially developed for use in Motocross
<ul><li class="li-square">Outer sleeve manufactured from high-grade aluminum</li><li class="li-square">Full sound despite low noise level</li><li class="li-square">Light weight</li><li class="li-square">Perfect fit</li><li class="li-square">Easy to install</li><li class="li-square">Recommended in combination with a FMF Fatty pipe for a perfectly matched full system with optimum performance</li><li class="li-square">Specially developed for use in Motocross</li></ul> dölj mer info

SXS12125560

Lagerstatus: hos lev.
Pris: 2205kr
PowerParts|Exhaust systems|2-Stroke Offroad
FMF Powercore 2 silencer
  • Outer sleeve manufactured from high-grade aluminum
  • Full sound despite low noise level
  • Light weight
  • Perfect fit
  • Easy to install
  • Recommended in combination with a FMF Fatty pipe for a perfectly matched full system with optimum performance
  • Specially developed for enduro use
<ul><li class="li-square">Outer sleeve manufactured from high-grade aluminum</li><li class="li-square">Full sound despite low noise level</li><li class="li-square">Light weight</li><li class="li-square">Perfect fit</li><li class="li-square">Easy to install</li><li class="li-square">Recommended in combination with a FMF Fatty pipe for a perfectly matched full system with optimum performance</li><li class="li-square">Specially developed for enduro use</li></ul> dölj mer info

SXS11125560

Lagerstatus: hos lev.
Pris: 1855kr
PowerParts|Exhaust systems|2-Stroke Offroad
Six Days silencer
These silencers provide a guaranteed performance boost over the whole RPM range, and fit perfectly with the sporty silhouette of our 2-stroke bikes. Used in many official race series. Other benefits:
  • Made from the finest aluminum
  • Full sound despite low noise level
  • Lightweight
  • Perfect fit, easy to install

We recommend combining them with a factory exhaust for optimal rideability and even better performance.

These silencers provide a guaranteed performance boost over the whole RPM range, and fit perfectly with the sporty silhouette of our 2-stroke bikes. Used in many official race series. Other benefits:<ul><li class="li-square">Made from the finest aluminum</li><li class="li-square">Full sound despite low noise level</li><li class="li-square">Lightweight</li><li class="li-square">Perfect fit, easy to install</li></ul><p>We recommend combining them with a factory exhaust for optimal rideability and even better performance.</p> dölj mer info

50305994000

Lagerstatus: hos lev.
Pris: 1975kr
PowerParts|Exhaust systems|Heat Protection
Expansion chamber guard

DID YOU ALREADY KNOW about the special properties of carbon fiber?

  • Extremely light: 80% lighter than steel with the same strength
  • Exceptionally stable: Four times more durable than aluminum
  • Maximum stiffness and tensile strength
  • Free from corrosion
  • High longterm temperature durability
  • Minimal heat expansion
  • And not least of all it looks just cool
The feather light carbon protector for maximum service life of your exhaust. The large cover is ideal protection against flying debris, branches etc.
<p>DID YOU ALREADY KNOW about the special properties of carbon fiber?</p><ul><li class="li-disc">Extremely light: 80% lighter than steel with the same strength</li><li class="li-disc">Exceptionally stable: Four times more durable than aluminum</li><li class="li-disc">Maximum stiffness and tensile strength</li><li class="li-disc">Free from corrosion</li><li class="li-disc">High longterm temperature durability</li><li class="li-disc">Minimal heat expansion</li><li class="li-disc">And not least of all it looks just cool</li></ul>The feather light carbon protector for maximum service life of your exhaust. The large cover is ideal protection against flying debris, branches etc. dölj mer info

77203940000

Lagerstatus: hos lev.
Pris: 3195kr
PowerParts|Footrests
Akrapovi? Footpeg set
33% lighter, despite increased tread surface 90 mm x 55 mm (compared to the standard footrests 82 mm x 45 mm). These titanium footrests have been developed to the specifications of our KTM factory riders. Use of the special titanium alloy also allows wear to be reduced to a minimum.
33% lighter, despite increased tread surface 90 mm x 55 mm (compared to the standard footrests 82 mm x 45 mm). These titanium footrests have been developed to the specifications of our KTM factory riders. Use of the special titanium alloy also allows wear to be reduced to a minimum. dölj mer info

54803095000

Lagerstatus: 2
Pris: 82kr
PowerParts|Footrests
Foam rubber
For extremely muddy conditions.
For extremely muddy conditions. dölj mer info

78003940244

Lagerstatus: hos lev.
Pris: 2325kr
PowerParts|Footrests
Pivot Pegz

Ingenious: Foot pegs that move with you when you shift your weight. Ideal for Motocross, Enduro and Supermoto.

The benefits:

  • Spring-mounted, 20-degree rotational movement possible towards front and rear
  • More control and grip in the corners thanks to the maneuverability
  • Large tread surface of 60 mm
  • Simpler and quicker weight shifting
  • Simpler gear changing and braking
  • Permanent contact between boot and foot peg: extends the service life of your boots!
<p>Ingenious: Foot pegs that move with you when you shift your weight. Ideal for Motocross, Enduro and Supermoto. </p><p>The benefits:</p><ul><li>Spring-mounted, 20-degree rotational movement possible towards front and rear</li><li>More control and grip in the corners thanks to the maneuverability</li><li>Large tread surface of 60 mm</li><li>Simpler and quicker weight shifting</li><li>Simpler gear changing and braking</li><li>Permanent contact between boot and foot peg: extends the service life of your boots!</li></ul> dölj mer info

U6951716

Lagerstatus: hos lev.
Pris: 105kr
PowerParts|Handlebar/Instruments/Electric|Grips
Grip donut set
Optimum protection against blisters on the thumbs with these coated neoprene rings. Simple to slide onto the grips.
Optimum protection against blisters on the thumbs with these coated neoprene rings. Simple to slide onto the grips. dölj mer info

78112917000

Lagerstatus: 1
Pris: 575kr
PowerParts|Handlebar/Instruments/Electric|Grips
Grip handle
  • High-strength aluminum grip
  • Indispensable for use on extreme terrain
  • Makes it easy to get your bike upright
  • Attaches to silencer bracket on rear frame
<ul><li class="li-square">High-strength aluminum grip</li><li class="li-square">Indispensable for use on extreme terrain</li><li class="li-square">Makes it easy to get your bike upright</li><li class="li-square">Attaches to silencer bracket on rear frame<br /></li></ul> dölj mer info

78112964000

Lagerstatus: hos lev.
Pris: 575kr
PowerParts|Handlebar/Instruments/Electric|Grips
Grip heater
Ensures warm hands, even in bad weather. Can only be fitted by an authorized KTM dealer. We recommend use of auxiliary wiring harness 77711979000 for installation.
<div class="gs01l">Ensures warm hands, even in bad weather. Can only be fitted by an authorized KTM dealer. We recommend use of auxiliary wiring harness 77711979000 for installation.</div> dölj mer info

54802021000

Lagerstatus: 4
Pris: 210kr
PowerParts|Handlebar/Instruments/Electric|Grips
Grip set
The special half-waffle grip has been developed to meet the demands and preferences of our factory riders, with the clear objectives: comfort AND safety - because no calluses on the palms and secure grip mean less stress when riding.
The benefits:
  • Ergonomic; contour matched to the shape of the hand for maximum comfort
  • Small "half waffle" ribs on the rear for secure grip
  • Made from two materials with different grades of hardness
  • Available in two versions (soft and medium)
  • Three areas for the metal safety wire
The special half-waffle grip has been developed to meet the demands and preferences of our factory riders, with the clear objectives: comfort AND safety - because no calluses on the palms and secure grip mean less stress when riding.<br />The benefits:<ul><li class="li-disc"> Ergonomic; contour matched to the shape of the hand for maximum comfort</li><li class="li-disc"> Small "half waffle" ribs on the rear for secure grip</li><li class="li-disc"> Made from two materials with different grades of hardness</li><li class="li-disc"> Available in two versions (soft and medium)</li><li class="li-disc"> Three areas for the metal safety wire</li></ul> dölj mer info

54802021100

Lagerstatus: 5
Pris: 199kr
PowerParts|Handlebar/Instruments/Electric|Grips
Grip set
The special half-waffle grip has been developed to meet the demands and preferences of our factory riders, with the clear objectives: comfort AND safety - because no calluses on the palms and secure grip mean less stress when riding.
The benefits:
  • Ergonomic; contour matched to the shape of the hand for maximum comfort
  • Small "half waffle" ribs on the rear for secure grip
  • Made from two materials with different grades of hardness
  • Available in two versions (soft and medium)
  • Three areas for the metal safety wire
The special half-waffle grip has been developed to meet the demands and preferences of our factory riders, with the clear objectives: comfort AND safety - because no calluses on the palms and secure grip mean less stress when riding.<br />The benefits:<ul><li class="li-disc"> Ergonomic; contour matched to the shape of the hand for maximum comfort</li><li class="li-disc"> Small "half waffle" ribs on the rear for secure grip</li><li class="li-disc"> Made from two materials with different grades of hardness</li><li class="li-disc"> Available in two versions (soft and medium)</li><li class="li-disc"> Three areas for the metal safety wire</li></ul> dölj mer info

63002021100

Lagerstatus: hos lev.
Pris: 250kr
PowerParts|Handlebar/Instruments/Electric|Grips
Grip set
The KTM 2K (2K= 2 different materials) grip combines the durability of KTM standard grips and the comfort of the soft KTM grips.
  • Harder orange material on the inside and at the grip ends for a long service life
  • Softer black material on the outside, where the hand lies on the grip, for increased comfort
The KTM 2K (2K= 2 different materials) grip combines the durability of KTM standard grips and the comfort of the soft KTM grips.<ul><li class="li-disc">Harder orange material on the inside and at the grip ends for a long service life</li><li class="li-disc">Softer black material on the outside, where the hand lies on the grip, for increased comfort</li></ul> dölj mer info

63002021200

Lagerstatus: 14
Pris: 290kr
PowerParts|Handlebar/Instruments/Electric|Grips
Grip set
The KTM 2K (2K= 2 different materials) grip combines the durability of KTM standard grips and the comfort of the soft KTM grips.
  • Harder orange material on the inside and at the grip ends for a long service life
  • Softer black material on the outside, where the hand lies on the grip, for increased comfort
  • With open grip ends for closed handguards or bar ends
The KTM 2K (2K= 2 different materials) grip combines the durability of KTM standard grips and the comfort of the soft KTM grips.<ul><li class="li-disc">Harder orange material on the inside and at the grip ends for a long service life</li><li class="li-disc">Softer black material on the outside, where the hand lies on the grip, for increased comfort</li><li class="li-disc">With open grip ends for closed handguards or bar ends</li></ul> dölj mer info

78102924000

Lagerstatus: hos lev.
Pris: 340kr
PowerParts|Handlebar/Instruments/Electric|Grips
Lock-on grip set
  • Grip replacement made easy
  • Right grip permanently glued to the throttle grip
  • Left grip with aluminum clamping ring for fixing on the handlebar
  • Inconvenient gluing and securing with wire no longer necessary
<ul><li class="li-square">Grip replacement made easy</li><li class="li-square">Right grip permanently glued to the throttle grip</li><li class="li-square">Left grip with aluminum clamping ring for fixing on the handlebar</li><li class="li-square">Inconvenient gluing and securing with wire no longer necessary</li></ul> dölj mer info

78102922000

Lagerstatus: hos lev.
Pris: 163kr
PowerParts|Handlebar/Instruments/Electric|Grips
Mud grips
The mud grips are simply pulled over existing grips and guarantee a secure hold on the grip rubber, even in extremely muddy conditions, thanks to their special material mix.
The mud grips are simply pulled over existing grips and guarantee a secure hold on the grip rubber, even in extremely muddy conditions, thanks to their special material mix. dölj mer info

78712916000

Lagerstatus: 3
Pris: 175kr
PowerParts|Handlebar/Instruments/Electric|Grips
Supporting strap
  • High-strength nylon strap
  • Indispensable for use on extreme terrain
  • Attaches to fork tube
<ul><li class="li-square">High-strength nylon strap</li><li class="li-square">Indispensable for use on extreme terrain</li><li class="li-square">Attaches to fork tube</li></ul> dölj mer info

78712917000

Lagerstatus: 2
Pris: 255kr
PowerParts|Handlebar/Instruments/Electric|Grips
Supporting strap
  • High-strength nylon strap
  • Indispensable for use on extreme terrain
  • Makes it easy to get your bike upright
  • Attaches to rear frame
<ul><li class="li-square">High-strength nylon strap</li><li class="li-square">Indispensable for use on extreme terrain</li><li class="li-square">Makes it easy to get your bike upright</li><li class="li-square">Attaches to rear frame</li></ul> dölj mer info

55102925000

Lagerstatus: 10+
Pris: 1855kr
PowerParts|Handlebar/Instruments/Electric|Grips
Throttle twist grip
The throttle twist grip has three differently profiled cams, each with a different gear ratio. This allows the throttle response characteristics to be varied in accordance with personal requirements.
The throttle twist grip has three differently profiled cams, each with a different gear ratio. This allows the throttle response characteristics to be varied in accordance with personal requirements. dölj mer info

7810297910028

Lagerstatus: hos lev.
Pris: 525kr
PowerParts|Handlebar/Instruments/Electric|Handguards
Handguard kit
Thanks to splitting of the surfaces, these open, very light KTM MX handguards ensure an uncompromising racing look in the angular KTM design. In two-component injection moulding technology:
  • Black mid-section = maximum strength for optimum protection
  • Coloured top and bottom parts = highly flexible, enduring even the roughest of treatment
  • Attached directly at the levers with a special mounting.
Thanks to splitting of the surfaces, these open, very light KTM MX handguards ensure an uncompromising racing look in the angular KTM design. In two-component injection moulding technology: <ul><li class="li-disc"> Black mid-section = maximum strength for optimum protection</li><li class="li-disc"> Coloured top and bottom parts = highly flexible, enduring even the roughest of treatment</li><li class="li-disc">Attached directly at the levers with a special mounting.</li></ul> dölj mer info

78102979044

Lagerstatus: 5
Pris: 152kr
PowerParts|Handlebar/Instruments/Electric|Handguards
Handguard kit
Thanks to splitting of the surfaces, these open, very light KTM MX handguards ensure an uncompromising racing look in the angular KTM design. In two-component injection moulding technology:
  • Black mid-section = maximum strength for optimum protection
  • Coloured top and bottom parts = highly flexible, enduring even the roughest of treatment
  • Attached directly at the levers with a special mounting.
Thanks to splitting of the surfaces, these open, very light KTM MX handguards ensure an uncompromising racing look in the angular KTM design. In two-component injection moulding technology: <ul><li class="li-disc"> Black mid-section = maximum strength for optimum protection</li><li class="li-disc"> Coloured top and bottom parts = highly flexible, enduring even the roughest of treatment</li><li class="li-disc">Attached directly at the levers with a special mounting.</li></ul> dölj mer info

7770297900004

Lagerstatus: hos lev.
Pris: 525kr
PowerParts|Handlebar/Instruments/Electric|Handguards
Handguard kit
Thanks to splitting of the surfaces, these open, very light KTM MX handguards ensure an uncompromising racing look in the angular KTM design. In two-component injection moulding technology:
  • Black mid-section = maximum strength for optimum protection
  • Coloured top and bottom parts = highly flexible, enduring even the roughest of treatment
Mounted directly on the handlebar with a plastic bracket.
Thanks to splitting of the surfaces, these open, very light KTM MX handguards ensure an uncompromising racing look in the angular KTM design. In two-component injection moulding technology: <ul><li class="li-disc"> Black mid-section = maximum strength for optimum protection</li><li class="li-disc"> Coloured top and bottom parts = highly flexible, enduring even the roughest of treatment</li></ul>Mounted directly on the handlebar with a plastic bracket. dölj mer info

7770297900028

Lagerstatus: hos lev.
Pris: 525kr
PowerParts|Handlebar/Instruments/Electric|Handguards
Handguard kit
Thanks to splitting of the surfaces, these open, very light MX handguards ensure an uncompromising racing look. In two-component injection moulding technology:
  • Black mid-section = maximum strength for optimum protection
  • Coloured top and bottom parts = highly flexible, enduring even the roughest of treatment
Mounted directly on the handlebar with a plastic bracket.
Thanks to splitting of the surfaces, these open, very light MX handguards ensure an uncompromising racing look. In two-component injection moulding technology:<ul><li class="li-disc">Black mid-section = maximum strength for optimum protection</li><li class="li-disc">Coloured top and bottom parts = highly flexible, enduring even the roughest of treatment</li></ul>Mounted directly on the handlebar with a plastic bracket. dölj mer info

7970297900030

Lagerstatus: hos lev.
Pris: 1465kr
PowerParts|Handlebar/Instruments/Electric|Handguards
Handguard kit
This handguard set has been specially developed for your motorcycle and is an essential accessory for heavy-duty offroad and Supermoto sessions. The broad, generous proportions, combined with the robust aluminum external frame ensure good mobility together with maximum protection in the event of a collision, stones thrown up from the road, branches etc.
This handguard set has been specially developed for your motorcycle and is an essential accessory for heavy-duty offroad and Supermoto sessions. The broad, generous proportions, combined with the robust aluminum external frame ensure good mobility together with maximum protection in the event of a collision, stones thrown up from the road, branches etc. dölj mer info

7970297900028

Lagerstatus: hos lev.
Pris: 1465kr
PowerParts|Handlebar/Instruments/Electric|Handguards
Handguard kit
This handguard set has been specially developed for your motorcycle and is an essential accessory for heavy-duty offroad and Supermoto sessions. The broad, generous proportions, combined with the robust aluminum external frame ensure good mobility together with maximum protection in the event of a collision, stones thrown up from the road, branches etc.
This handguard set has been specially developed for your motorcycle and is an essential accessory for heavy-duty offroad and Supermoto sessions. The broad, generous proportions, combined with the robust aluminum external frame ensure good mobility together with maximum protection in the event of a collision, stones thrown up from the road, branches etc. dölj mer info

79702979000EB

Lagerstatus: hos lev.
Pris: 1465kr
PowerParts|Handlebar/Instruments/Electric|Handguards
Handguard kit
This handguard set has been specially developed for your motorcycle and is an essential accessory for heavy-duty offroad and Supermoto sessions. The broad, generous proportions, combined with the robust aluminum external frame ensure good mobility together with maximum protection in the event of a collision, stones thrown up from the road, branches etc.
This handguard set has been specially developed for your motorcycle and is an essential accessory for heavy-duty offroad and Supermoto sessions. The broad, generous proportions, combined with the robust aluminum external frame ensure good mobility together with maximum protection in the event of a collision, stones thrown up from the road, branches etc. dölj mer info

76502979144

Lagerstatus: hos lev.
Pris: 1035kr
PowerParts|Handlebar/Instruments/Electric|Handguards
Handguard kit
Extremely stable aluminum prevents broken levers if the bike should ever fall over.
Including fastening materials.
Extremely stable aluminum prevents broken levers if the bike should ever fall over.<br />Including fastening materials. dölj mer info

7650297910030

Lagerstatus: hos lev.
Pris: 1155kr
PowerParts|Handlebar/Instruments/Electric|Handguards
Handguard kit
This handguard set has been specially developed for your motorcycle and is an essential accessory for heavy-duty offroad and Supermoto sessions. The broad, generous proportions, combined with the robust aluminum external frame ensure good mobility together with maximum protection in the event of a collision, stones thrown up from the road, branches etc.
This handguard set has been specially developed for your motorcycle and is an essential accessory for heavy-duty offroad and Supermoto sessions. The broad, generous proportions, combined with the robust aluminum external frame ensure good mobility together with maximum protection in the event of a collision, stones thrown up from the road, branches etc. dölj mer info

60302179000EB

Lagerstatus: hos lev.
Pris: 690kr
PowerParts|Handlebar/Instruments/Electric|Handguards
Handguard kit

This handguard set is not just visually impressive. Thanks to the special mix of materials, the handguard protects your hands and controls from damage without immediately breaking up. They also give you outstanding weather protection.

<p>This handguard set is not just visually impressive. Thanks to the special mix of materials, the handguard protects your hands and controls from damage without immediately breaking up. They also give you outstanding weather protection.</p> dölj mer info

7650297900028

Lagerstatus: hos lev.
Pris: 1155kr
PowerParts|Handlebar/Instruments/Electric|Handguards
Handguard kit

This handguard set has been specially developed for your motorcycle and is an essential accessory for heavy-duty offroad and Supermoto sessions. The broad, generous proportions, combined with the robust aluminum external frame ensure good mobility together with maximum protection in the event of a collision, stones thrown up from the road, branches etc.

<p>This handguard set has been specially developed for your motorcycle and is an essential accessory for heavy-duty offroad and Supermoto sessions. The broad, generous proportions, combined with the robust aluminum external frame ensure good mobility together with maximum protection in the event of a collision, stones thrown up from the road, branches etc.</p> dölj mer info

6030217910030

Lagerstatus: 7
Pris: 690kr
PowerParts|Handlebar/Instruments/Electric|Handguards
Handguard kit

This handguard set is not just visually impressive. Thanks to the special mix of materials, the handguard protects your hands and controls from damage without immediately breaking up. They also give you outstanding weather protection.

<p>This handguard set is not just visually impressive. Thanks to the special mix of materials, the handguard protects your hands and controls from damage without immediately breaking up. They also give you outstanding weather protection.</p> dölj mer info

6030217910028

Lagerstatus: 1
Pris: 690kr
PowerParts|Handlebar/Instruments/Electric|Handguards
Handguard kit

This handguard set is not just visually impressive. Thanks to the special mix of materials, the handguard protects your hands and controls from damage without immediately breaking up. They also give you outstanding weather protection.

<p>This handguard set is not just visually impressive. Thanks to the special mix of materials, the handguard protects your hands and controls from damage without immediately breaking up. They also give you outstanding weather protection.</p> dölj mer info

6030217900004

Lagerstatus: 1
Pris: 690kr
PowerParts|Handlebar/Instruments/Electric|Handguards
Handguard kit

This handguard set is not just visually impressive. Thanks to the special mix of materials, the handguard protects your hands and controls from damage without immediately breaking up. They also give you outstanding weather protection.

<p>This handguard set is not just visually impressive. Thanks to the special mix of materials, the handguard protects your hands and controls from damage without immediately breaking up. They also give you outstanding weather protection.</p> dölj mer info

7800207910004

Lagerstatus: 2
Pris: 645kr
PowerParts|Handlebar/Instruments/Electric|Handguards
Handguard kit
The closed, two-component plastic handguards developed by KTM feature a black center section that offers maximum strength for optimum protection. The colorful upper and lower parts are highly flexible and endure even the roughest of treatment without complaint. Available in two different heights.
<div class="gs01l">The closed, two-component plastic handguards developed by KTM feature a black center section that offers maximum strength for optimum protection. The colorful upper and lower parts are highly flexible and endure even the roughest of treatment without complaint. Available in two different heights.</div> dölj mer info

7800207920028

Lagerstatus: 1
Pris: 645kr
PowerParts|Handlebar/Instruments/Electric|Handguards
Handguard kit
These handguards developed especially for KTM bikes are an indispensable companion for serious offroad and supermoto use. The wide, spacious design ensures excellent mobility and maximum protection against impact, flying stones, branches, etc. Cannot be fitted with Twinwall handlebar.
These handguards developed especially for KTM bikes are an indispensable companion for serious offroad and supermoto use. The wide, spacious design ensures excellent mobility and maximum protection against impact, flying stones, branches, etc. Cannot be fitted with Twinwall handlebar. dölj mer info

7800207920030

Lagerstatus: 2
Pris: 645kr
PowerParts|Handlebar/Instruments/Electric|Handguards
Handguard kit
These handguards developed especially for KTM bikes are an indispensable companion for serious offroad and supermoto use. The wide, spacious design ensures excellent mobility and maximum protection against impact, flying stones, branches, etc. Cannot be fitted with Twinwall handlebar.
These handguards developed especially for KTM bikes are an indispensable companion for serious offroad and supermoto use. The wide, spacious design ensures excellent mobility and maximum protection against impact, flying stones, branches, etc. Cannot be fitted with Twinwall handlebar. dölj mer info

5480200130004

Lagerstatus: 1
Pris: 1155kr
PowerParts|Handlebar/Instruments/Electric|Handlebar
Handlebar
DO YOU KNOW that KTM handlebars must withstand very elaborate and specially developed test cycles before they come to market?
The facts:
  • All KTM handlebars are made from EN AW 7010 T6 aluminum
  • 28.5 mm diameter in the clamping area
  • 22.15 mm diameter in the lever area
  • Position markings for simple setting
  • Dimensions: A = 115 mm, B = 806 mm, C = 62 mm
DO YOU KNOW that KTM handlebars must withstand very elaborate and specially developed test cycles before they come to market?<br />The facts:<ul><li class="li-disc">All KTM handlebars are made from EN AW 7010 T6 aluminum</li><li class="li-disc">28.5 mm diameter in the clamping area</li><li class="li-disc">22.15 mm diameter in the lever area</li><li class="li-disc">Position markings for simple setting</li><li class="li-disc">Dimensions: A = 115 mm, B = 806 mm, C = 62 mm</li></ul> dölj mer info

7950290100004

Lagerstatus: hos lev.
Pris: 2325kr
PowerParts|Handlebar/Instruments/Electric|Handlebar
Renthal Twinwall handlebar
The Twinwall, in KTM orange design, combines two handlebars in one: An exterior guarantees maximum strength against external damage (e.g. falling over) and is also anodized against corrosion. The interior, made of a special alloy, is also hard anodized to protect it from damage by the handlebar controls. Nylon inserts in the inner tube allow thinner walls. This saves weight and has a positive effect on the flexing properties. Rubber seals at the crossing points of the two tubes to prevent the ingress of water, dirt, cleaning agents, and other contaminants. Comes with handlebar padding.
The Twinwall, in KTM orange design, combines two handlebars in one: An exterior guarantees maximum strength against external damage (e.g. falling over) and is also anodized against corrosion. The interior, made of a special alloy, is also hard anodized to protect it from damage by the handlebar controls. Nylon inserts in the inner tube allow thinner walls. This saves weight and has a positive effect on the flexing properties. Rubber seals at the crossing points of the two tubes to prevent the ingress of water, dirt, cleaning agents, and other contaminants. Comes with handlebar padding. dölj mer info

59501039144

Lagerstatus: 2
Pris: 1005kr
PowerParts|Handlebar/Instruments/Electric|Handlebar support
Factory handlebar support
Adjustable to 3 different heights: 28 mm, 37 mm, 46 mm. Available for handlebar diameters 22 mm and 28 mm.
Adjustable to 3 different heights: 28 mm, 37 mm, 46 mm. Available for handlebar diameters 22 mm and 28 mm. dölj mer info

59001039144

Lagerstatus: 1
Pris: 880kr
PowerParts|Handlebar/Instruments/Electric|Handlebar support
Handlebar mount kit
For conversion from 22 mm-diameter handlebars to handlebars with a diameter of 28 mm.
For conversion from 22 mm-diameter handlebars to handlebars with a diameter of 28 mm. dölj mer info

78901939044

Lagerstatus: 2
Pris: 575kr
PowerParts|Handlebar/Instruments/Electric|Handlebar support
Handlebar mount kit
Available in five different heights.
Included in the kit are 2x handlebar support lower parts and 2x fastening bolts.
The upper parts and bolts required for clamping the handlebar are taken from the original handlebar support.
Available in five different heights. <br />Included in the kit are 2x handlebar support lower parts and 2x fastening bolts.<br />The upper parts and bolts required for clamping the handlebar are taken from the original handlebar support. dölj mer info

54801043012

Lagerstatus: 1
Pris: 340kr
PowerParts|Handlebar/Instruments/Electric|Handlebar support
Handlebar riser
Can only be fitted in combination with handlebar support 59001039100 (standard on EXC models up to MY 2011).
12 mm
Can only be fitted in combination with handlebar support 59001039100 (standard on EXC models up to MY 2011).<br />12 mm dölj mer info

54801043020

Lagerstatus: hos lev.
Pris: 340kr
PowerParts|Handlebar/Instruments/Electric|Handlebar support
Handlebar riser
Can only be fitted in combination with handlebar support 59001039100 (standard on EXC models up to MY 2011).
20 mm
Can only be fitted in combination with handlebar support 59001039100 (standard on EXC models up to MY 2011).<br />20 mm dölj mer info

77701939020

Lagerstatus: 1
Pris: 645kr
PowerParts|Handlebar/Instruments/Electric|Handlebar support
Handlebar riser
These CNC-machined, high-strength aluminum handlebar risers are extremely robust thanks to their special screw fastening (from below) on the triple clamp. Twisting and bending are therefore practically impossible. Use of these handlebar risers is only possible on CNC-machined triple clamps. Available in three different heights.
<div class="gs01l">These CNC-machined, high-strength aluminum handlebar risers are extremely robust thanks to their special screw fastening (from below) on the triple clamp. Twisting and bending are therefore practically impossible. Use of these handlebar risers is only possible on CNC-machined triple clamps. Available in three different heights.</div> dölj mer info

SXS07125200

Lagerstatus: hos lev.
Pris: 2085kr
PowerParts|Handlebar/Instruments/Electric|Handlebar support
Progressive handlebar damping system (PHDS)
The CNC-machined handlebar mounting with cushioning rubber inserts relieves wrist and shoulder joints.
Further benefits of the PHDS:
  • Cushioning of heavy knocks
  • Absorption of vibration from chassis and engine
  • Additional handlebar damping in horizontal direction
  • Optimum steering precision
  • Handlebar height adjustable to 2 positions
  • Further damping elements available in three degrees of hardness (soft, medium, hard) for individual tuning
The CNC-machined handlebar mounting with cushioning rubber inserts relieves wrist and shoulder joints.<br />Further benefits of the PHDS:<ul><li class="li-disc">Cushioning of heavy knocks</li><li class="li-disc">Absorption of vibration from chassis and engine</li><li class="li-disc">Additional handlebar damping in horizontal direction</li><li class="li-disc">Optimum steering precision</li><li class="li-disc">Handlebar height adjustable to 2 positions</li><li class="li-disc">Further damping elements available in three degrees of hardness (soft, medium, hard) for individual tuning</li></ul> dölj mer info

77711979044

Lagerstatus: 1
Pris: 290kr
PowerParts|Handlebar/Instruments/Electric|Instruments/Electric
Auxiliary wiring harness
The Y-distributor allows you to connect two power consumers to auxiliary wiring harness 777.11.979.000. The connected power consumer can be switched off with the integrated switch. This prevents the battery from being drained unnecessarily.
<div class="gs01l">The Y-distributor allows you to connect two power consumers to auxiliary wiring harness 777.11.979.000. The connected power consumer can be switched off with the integrated switch. This prevents the battery from being drained unnecessarily.</div> dölj mer info

77711979010

Lagerstatus: 1
Pris: 93kr
PowerParts|Handlebar/Instruments/Electric|Instruments/Electric
Auxiliary wiring harness
The Y-distributor allows you to connect two power consumers to auxiliary wiring harness 777.11.979.000.
<div class="gs01l">The Y-distributor allows you to connect two power consumers to auxiliary wiring harness 777.11.979.000.</div> dölj mer info

77711979000

Lagerstatus: 2
Pris: 175kr
PowerParts|Handlebar/Instruments/Electric|Instruments/Electric
Auxiliary wiring harness

We recommend using this additional wiring harness for all power consumers. Furthermore you have with the option of installing power consumers such as grip heating or a fan on your SX or XC with this wiring harness. Warning: The power consumer is now connected directly to the battery. If it is not turned off, the battery is therefore also drained when the engine is switched off. Optionally available: Y-distributor 777.11.979.010 or 777.11.979.044.

<p>We recommend using this additional wiring harness for all power consumers. Furthermore you have with the option of installing power consumers such as grip heating or a fan on your SX or XC with this wiring harness. Warning: The power consumer is now connected directly to the battery. If it is not turned off, the battery is therefore also drained when the engine is switched off. Optionally available: Y-distributor 777.11.979.010 or 777.11.979.044.</p> dölj mer info

78112920000

Lagerstatus: 1
Pris: 760kr
PowerParts|Handlebar/Instruments/Electric|Instruments/Electric
Hourmeter
Know exactly when the next service is due.
Know exactly when the next service is due. dölj mer info

78112920044

Lagerstatus: hos lev.
Pris: 152kr
PowerParts|Handlebar/Instruments/Electric|Instruments/Electric
Hourmeter bracket
To assemble the hourmeter 78112920000 on the triple clamp.
To assemble the hourmeter 78112920000 on the triple clamp. dölj mer info

SXS12450644

Lagerstatus: hos lev.
Pris: 126kr
PowerParts|Handlebar/Instruments/Electric|Instruments/Electric
Hourmeter bracket
For fitting hourmeter SXS.12.450.600.
For fitting hourmeter SXS.12.450.600. dölj mer info

51539974200

Lagerstatus: 2
Pris: 1155kr
PowerParts|Handlebar/Instruments/Electric|Instruments/Electric
Ignition curve switch
Ignition curve adjustment made easy! On all models with a digital box with pre-programmed ignition curves, this switch allows you to change the ignition curve conveniently from the handlebar. (Check your operating manual to find out whether your bike has pre-programmed ignition curves.)
Ignition curve adjustment made easy! On all models with a digital box with pre-programmed ignition curves, this switch allows you to change the ignition curve conveniently from the handlebar. (Check your operating manual to find out whether your bike has pre-programmed ignition curves.) dölj mer info

7801390200004

Lagerstatus: 3
Pris: 255kr
PowerParts|Handlebar/Instruments/Electric|Lever
Brake lever
DO YOU KNOW about the benefits of forged brake and clutch levers from KTM PowerParts?
  • Manufactured from high-strength aluminum, forged and then CNC-machined
  • This extensive production process guarantees a long service life, maximum flexibility and a precise fit
  • Ergonomically perfected shape (the result of years of racing experience)
  • Predefined breaking point
  • Orange anodized
Suitable for all hydraulic Brembo® brake systems.
DO YOU KNOW about the benefits of forged brake and clutch levers from KTM PowerParts?<ul><li class="li-disc"> Manufactured from high-strength aluminum, forged and then CNC-machined </li><li class="li-disc"> This extensive production process guarantees a long service life, maximum flexibility and a precise fit</li><li class="li-disc"> Ergonomically perfected shape (the result of years of racing experience)</li><li class="li-disc"> Predefined breaking point</li><li class="li-disc"> Orange anodized</li></ul>Suitable for all hydraulic Brembo® brake systems. dölj mer info

7800293110004

Lagerstatus: 4
Pris: 255kr
PowerParts|Handlebar/Instruments/Electric|Lever
Clutch lever
DO YOU KNOW about the benefits of forged brake and clutch levers from KTM PowerParts?
  • Manufactured from high-strength aluminum, forged and then CNC-machined
  • This extensive production process guarantees a long service life, maximum flexibility and a precise fit
  • Ergonomically perfected shape (the result of years of racing experience)
  • Predefined breaking point
  • Orange anodized
Suitable for all hydraulic Magura clutch fittings where the Flex lever is fitted as standard.
DO YOU KNOW about the benefits of forged brake and clutch levers from KTM PowerParts?<ul><li class="li-disc"> Manufactured from high-strength aluminum, forged and then CNC-machined </li><li class="li-disc"> This extensive production process guarantees a long service life, maximum flexibility and a precise fit</li><li class="li-disc"> Ergonomically perfected shape (the result of years of racing experience)</li><li class="li-disc"> Predefined breaking point</li><li class="li-disc"> Orange anodized</li></ul>Suitable for all hydraulic Magura clutch fittings where the Flex lever is fitted as standard. dölj mer info

7801380220004

Lagerstatus: 1
Pris: 1035kr
PowerParts|Handlebar/Instruments/Electric|Lever
Flex brake lever
Ever had to give up during the race because of a broken clutch or brake lever? That will never happen again - these levers are designed to fold away on contact with the ground.
Suitable for all hydraulic Brembo® brake systems.
Ever had to give up during the race because of a broken clutch or brake lever? That will never happen again - these levers are designed to fold away on contact with the ground.<br />Suitable for all hydraulic Brembo® brake systems. dölj mer info

78013802000

Lagerstatus: 1
Pris: 1155kr
PowerParts|Handlebar/Instruments/Electric|Lever
Flex brake lever
Ever had to give up during the race because of a broken clutch or brake lever? That will never happen again - these levers are designed to fold away on contact with the ground.
Suitable for all hydraulic Brembo® brake systems.
Ever had to give up during the race because of a broken clutch or brake lever? That will never happen again - these levers are designed to fold away on contact with the ground.<br />Suitable for all hydraulic Brembo® brake systems. dölj mer info

7870293104404

Lagerstatus: hos lev.
Pris: 1155kr
PowerParts|Handlebar/Instruments/Electric|Lever
Flex clutch lever
Ever had to give up during the race because of a broken clutch or brake lever? That will never happen again - these levers are designed to fold away on contact with the ground.
Suitable for all hydraulic Brembo® clutch fittings.
Ever had to give up during the race because of a broken clutch or brake lever? That will never happen again - these levers are designed to fold away on contact with the ground.<br />Suitable for all hydraulic Brembo® clutch fittings. dölj mer info

77702944000

Lagerstatus: 7
Pris: 175kr
PowerParts|Handlebar/Instruments/Electric|Special parts
Clamp
  • Including plastic insert
  • The brake or clutch armature rotates in case of a fall
  • Reduces the risk of a lever being broken
  • Suitable for all Brembo® and Formula brake and clutch assembles
<ul><li class="li-square">Including plastic insert</li><li class="li-square">The brake or clutch armature rotates in case of a fall</li><li class="li-square">Reduces the risk of a lever being broken</li><li class="li-square">Suitable for all Brembo® and Formula brake and clutch assembles</li></ul> dölj mer info

54802005000

Lagerstatus: 3
Pris: 175kr
PowerParts|Handlebar/Instruments/Electric|Special parts
Handlebar ends
Protects rubber grips from grazing in the event of a fall.
Protects rubber grips from grazing in the event of a fall. dölj mer info

77202002144

Lagerstatus: 7
Pris: 255kr
PowerParts|Handlebar/Instruments/Electric|Special parts
Handlebar pad
Provides optimum protection. Already a must at many events.
Provides optimum protection. Already a must at many events. dölj mer info

SXS07250800

Lagerstatus: 9
Pris: 290kr
PowerParts|Handlebar/Instruments/Electric|Special parts
Handlebar pad
Provides optimum protection. Already a must at many events.
Provides optimum protection. Already a must at many events. dölj mer info

79002901050

Lagerstatus: 3
Pris: 410kr
PowerParts|Handlebar/Instruments/Electric|Special parts
Handlebar pad

Provides optimum protection. With the integrated card holder you always have the time in view. A small extra pocket allows you to stow small items. Can also be fitted in combination with the PHDS-handlebar support.

<p>Provides optimum protection. With the integrated card holder you always have the time in view. A small extra pocket allows you to stow small items. Can also be fitted in combination with the PHDS-handlebar support.</p> dölj mer info

77012005000

Lagerstatus: hos lev.
Pris: 5195kr
PowerParts|Handlebar/Instruments/Electric|Steering damper
Factory steering damper
Greater safety and stability at the front forks under speed. This extremely light and fully adjustable KTM steering damper offers a top performance for the price. The sophisticated damper mounting allows individual steering adjustment even after installation. Very low design profile.

00050000929 handle bar support kit required for use on MY16 and on XC from MY16.

Greater safety and stability at the front forks under speed. This extremely light and fully adjustable KTM steering damper offers a top performance for the price. The sophisticated damper mounting allows individual steering adjustment even after installation. Very low design profile.<p>00050000929 handle bar support kit required for use on MY16 and on XC from MY16.</p> dölj mer info

77012005544

Lagerstatus: hos lev.
Pris: 760kr
PowerParts|Handlebar/Instruments/Electric|Steering damper
Factory steering damper bracket
When used with SX models from model year 16, the post mount 77212905444 must be installed.
When used with SX models from model year 16, the post mount 77212905444 must be installed. dölj mer info

77012005144

Lagerstatus: 1
Pris: 760kr
PowerParts|Handlebar/Instruments/Electric|Steering damper
Factory steering damper bracket
dölj mer info

77012005644

Lagerstatus: 1
Pris: 430kr
PowerParts|Handlebar/Instruments/Electric|Steering damper
PHDS bracket for Factory steering damper
This bracket is required for fitting the progressive handlebar damping system (PHDS) SXS.07125200 in conjunction with factory steering damper 77012005000 or steering damper 58512050100, whereby the latter is only permissible if steering damper bracket 58512050144 or 58512050544 is used.
This bracket is required for fitting the progressive handlebar damping system (PHDS) SXS.07125200 in conjunction with factory steering damper 77012005000 or steering damper 58512050100, whereby the latter is only permissible if steering damper bracket 58512050144 or 58512050544 is used. dölj mer info

58512050100

Lagerstatus: hos lev.
Pris: 7995kr
PowerParts|Handlebar/Instruments/Electric|Steering damper
Steering damper
Have you ever had the handlebars ripped out of your hands? This high-end steering damper provides maximum control on fast tracks and a significant increase in safety!
Further advantages
  • Extremely low weight
  • Sensitive feedback behavior
  • High speed setting
  • Optimum 25 click setting range

Proven success with the KTM Works Rally Team. Fits all SX and EXC models.

Have you ever had the handlebars ripped out of your hands? This high-end steering damper provides maximum control on fast tracks and a significant increase in safety!<br />Further advantages<ul><li>Extremely low weight</li><li>Sensitive feedback behavior</li><li>High speed setting</li><li>Optimum 25 click setting range</li></ul><p>Proven success with the KTM Works Rally Team. Fits all SX and EXC models.</p> dölj mer info

58512050544

Lagerstatus: hos lev.
Pris: 760kr
PowerParts|Handlebar/Instruments/Electric|Steering damper
Steering damper bracket
When used with SX models from model year 16, the post mount 77212905444 must be installed.
When used with SX models from model year 16, the post mount 77212905444 must be installed. dölj mer info

58512050144

Lagerstatus: hos lev.
Pris: 760kr
PowerParts|Handlebar/Instruments/Electric|Steering damper
Steering damper bracket
dölj mer info

77212905444

Lagerstatus: hos lev.
Pris: 1855kr
PowerParts|Handlebar/Instruments/Electric|Steering damper
Steering damper counter bearing
dölj mer info

93002903100

Lagerstatus: 2
Pris: 700kr
PowerParts|Navigation
GPS bracket

Only for use on original handlebar mounting.

<p>Only for use on original handlebar mounting.</p> dölj mer info

60112092070

Lagerstatus: 3
Pris: 390kr
PowerParts|Navigation
Handlebar cross brace
Universally applicable for mounting the GPS bracket.
Universally applicable for mounting the GPS bracket. dölj mer info

7910199902104

Lagerstatus: hos lev.
Pris: 5795kr
PowerParts|New
Factory triple clamp
  • Made from high-grade aluminum
  • Optimally tuned steering stem stiffness
  • 100% alignment of the fork tubes
  • Ideal flexibility - precisely customized to the WP fork
  • Specially optimized geometry of the fork clamping
  • No ovalization of the fork outer tube
  • Highly precise and smooth fork response
  • Maximum gain in handling and, at the same time, stability in the front wheel with overall more homogeneous effects of force in the complete vehicle
  • Very easy offset adjustment of 20 or 22 mm
  • Shorter offset: Stability on fast straights
  • Longer offset: easy quick cornering in curves
  • Including steering stem with steering head bearing already pressed on
<ul><li class="li-square">Made from high-grade aluminum</li><li class="li-square">Optimally tuned steering stem stiffness</li><li class="li-square">100% alignment of the fork tubes</li><li class="li-square">Ideal flexibility - precisely customized to the WP fork</li><li class="li-square">Specially optimized geometry of the fork clamping</li><li class="li-square">No ovalization of the fork outer tube</li><li class="li-square">Highly precise and smooth fork response</li><li class="li-square">Maximum gain in handling and, at the same time, stability in the front wheel with overall more homogeneous effects of force in the complete vehicle</li><li class="li-square">Very easy offset adjustment of 20 or 22 mm</li><li class="li-square">Shorter offset: Stability on fast straights</li><li class="li-square">Longer offset: easy quick cornering in curves</li><li class="li-square">Including steering stem with steering head bearing already pressed on</li></ul> dölj mer info

00062030051

Lagerstatus: 9
Pris: 120kr
PowerParts|Oil/chemicals
Grip glue
Perfect hold for your grips. Contents: 20 g.
Perfect hold for your grips. Contents: 20 g. dölj mer info

00062030058

Lagerstatus: 6
Pris: 87kr
PowerParts|Oil/chemicals
Repair kit
The repair kit is a two-component epoxy resin adhesive. Hardens at room temperature: accelerated hardening possible by raising the temperature.
Use: Particularly suitable for steel, but also other metals, wood, concrete, ceramics, glass and most plastics. The steel bond is resistant to, among other things, oil, gasoline, diesel and battery acid.
Processing: Best results are achieved with clean and rough surfaces. Cut off the required amount and knead for approx. 1 minute until a uniform color is achieved. Use within 2 minutes.
At first, it seems as if there is no adhesion. Just carry on and press the adhesive mixture into the surface. Remove any excess material. When coating or repairing surfaces that are still wet, leak or are under water, apply pressure until adhesion begins. Smooth flat with water by hand for an even surface. Wash your hands with soap and water (or with a Turbo cleaning towelette) immediately after completing your work. Hardening commences after 5 to 10 minutes. The repaired part can be used again after as little as 60 minutes. The surfaces to be glued must be dry and free from dust and grease. Contents: 56 g.
The repair kit is a two-component epoxy resin adhesive. Hardens at room temperature: accelerated hardening possible by raising the temperature. <br />Use: Particularly suitable for steel, but also other metals, wood, concrete, ceramics, glass and most plastics. The steel bond is resistant to, among other things, oil, gasoline, diesel and battery acid. <br />Processing: Best results are achieved with clean and rough surfaces. Cut off the required amount and knead for approx. 1 minute until a uniform color is achieved. Use within 2 minutes.<br />At first, it seems as if there is no adhesion. Just carry on and press the adhesive mixture into the surface. Remove any excess material. When coating or repairing surfaces that are still wet, leak or are under water, apply pressure until adhesion begins. Smooth flat with water by hand for an even surface. Wash your hands with soap and water (or with a Turbo cleaning towelette) immediately after completing your work. Hardening commences after 5 to 10 minutes. The repaired part can be used again after as little as 60 minutes. The surfaces to be glued must be dry and free from dust and grease. Contents: 56 g. dölj mer info

00062030050

Lagerstatus: hos lev.
Pris: 380kr
PowerParts|Oil/chemicals
Thread lock

Medium strength thread lock - contents, 50 ml.

  • Temperature resistant from -55 to +200 °C 
  • Fills gaps up to 0.25 mm
  • Final strength achieved after 1 to 3 hours
<p>Medium strength thread lock - contents, 50 ml.</p><ul><li>Temperature resistant from -55 to +200 °C </li><li>Fills gaps up to 0.25 mm</li><li>Final strength achieved after 1 to 3 hours<br /></li></ul> dölj mer info

5481096120004

Lagerstatus: 2
Pris: 925kr
PowerParts|Protection|Chassis Offroad
Brake disc guard
Protects the rear brake disc from stones or other solid objects in the event of a crash or when riding hard. Manufactured from high-strength aluminum.
Protects the rear brake disc from stones or other solid objects in the event of a crash or when riding hard. Manufactured from high-strength aluminum. dölj mer info

78110945100

Lagerstatus: 1
Pris: 455kr
PowerParts|Protection|Chassis Offroad
Crash bung
Protects the swingarm in the event of a crash.
Protects the swingarm in the event of a crash. dölj mer info

78109945000

Lagerstatus: 1
Pris: 455kr
PowerParts|Protection|Chassis Offroad
Crash bung
Protects the fork from damage in the event of a crash. Suitable for all models with 26 mm front axle.
Protects the fork from damage in the event of a crash. Suitable for all models with 26 mm front axle. dölj mer info

59003990250

Lagerstatus: 1
Pris: 89kr
PowerParts|Protection|Chassis Offroad
Foam rubber
When positioned between engine and skid plate, less dirt can accumulate, hence allowing better cooling of the engine.
When positioned between engine and skid plate, less dirt can accumulate, hence allowing better cooling of the engine. dölj mer info

54803047000

Lagerstatus: 3
Pris: 255kr
PowerParts|Protection|Chassis Offroad
Footpeg slider kit
Glass fiber reinforced plastic. Protects the footrests from damage during a potential camber. Mountable on all motorcycles with footrests 59003041250 / 78003041050 right and 59003040250 / 78003040050 left.
Glass fiber reinforced plastic. Protects the footrests from damage during a potential camber. Mountable on all motorcycles with footrests 59003041250 / 78003041050 right and 59003040250 / 78003040050 left. dölj mer info

59501095000

Lagerstatus: 1
Pris: 340kr
PowerParts|Protection|Chassis Offroad
Fork protector
  • Made from neoprene
  • Ideal protection for sealing the fork
  • For use with the open fork protector
  • For fork tube with a diameter of 48 mm
<ul><li class="li-square">Made from neoprene</li><li class="li-square">Ideal protection for sealing the fork</li><li class="li-square">For use with the open fork protector</li><li class="li-square">For fork tube with a diameter of 48 mm</li></ul> dölj mer info

78001095000

Lagerstatus: 2
Pris: 340kr
PowerParts|Protection|Chassis Offroad
Fork protector
  • Made from neoprene
  • Ideal protection for sealing the fork
  • For use with the closed fork protector
  • For fork tube with a diameter of 48 mm
<ul><li class="li-square">Made from neoprene</li><li class="li-square">Ideal protection for sealing the fork</li><li class="li-square">For use with the closed fork protector</li><li class="li-square">For fork tube with a diameter of 48 mm</li></ul> dölj mer info

77203094000

Lagerstatus: 5
Pris: 340kr
PowerParts|Protection|Chassis Offroad
Frame protection set
This frame protection set includes bushes, chain sprocket cover, brake cylinder protector and screws.
This frame protection set includes bushes, chain sprocket cover, brake cylinder protector and screws. dölj mer info

7720309400004

Lagerstatus: 5
Pris: 340kr
PowerParts|Protection|Chassis Offroad
Frame protection set
Reliably prevents damage to the powder coating by dirt, crashes or the rider's boots. Also protects trousers and boots from burns on the exhaust side.
Reliably prevents damage to the powder coating by dirt, crashes or the rider's boots. Also protects trousers and boots from burns on the exhaust side. dölj mer info

7720399400030

Lagerstatus: hos lev.
Pris: 290kr
PowerParts|Protection|Chassis Offroad
Frame protection sticker set
For protecting the frame without changing the slim lines of your bike.
For protecting the frame without changing the slim lines of your bike. dölj mer info

52000093

Lagerstatus: 4
Pris: 315kr
PowerParts|Protection|Chassis Offroad
Protective fork sticker set
Extra thick film; protects the outer tubes against stone impact.
For all 48 mm forks.
Extra thick film; protects the outer tubes against stone impact.<br />For all 48 mm forks. dölj mer info

52000092

Lagerstatus: 4
Pris: 315kr
PowerParts|Protection|Chassis Offroad
Protective fork sticker set
Extra thick film; protects the outer tubes against stone impact.
For all 48 mm forks.
Extra thick film; protects the outer tubes against stone impact.<br />For all 48 mm forks. dölj mer info

7720499410030

Lagerstatus: 2
Pris: 690kr
PowerParts|Protection|Chassis Offroad
Swingarm protection
The plastic swingarm guard prevents the swingarm from being damaged.
Advantage: A swingarm that is intact and visually attractive is sure to have a positive effect on the resale value of your motorcycle.

ATTENTION: Brake line guide 76504042000 is required for correct mounting onto 125 SX, 250/350/450 SX-F for models made in the year 2016 and after.

The plastic swingarm guard prevents the swingarm from being damaged.<br />Advantage: A swingarm that is intact and visually attractive is sure to have a positive effect on the resale value of your motorcycle.<p>ATTENTION: Brake line guide 76504042000 is required for correct mounting onto 125 SX, 250/350/450 SX-F for models made in the year 2016 and after.</p> dölj mer info

78108999020

Lagerstatus: hos lev.
Pris: 117kr
PowerParts|Protection|Chassis Offroad
Triple clamp protective film kit
Extra thick film protects the triple clamp from stone impacts.
For use with factory triple clamps SXS13450460 and SXS13450470 as well as triple clamp 7810199902004 and 7810199902204.
Extra thick film protects the triple clamp from stone impacts.<br />For use with factory triple clamps SXS13450460 and SXS13450470 as well as triple clamp 7810199902004 and 7810199902204. dölj mer info

50303190100

Lagerstatus: 2
Pris: 1155kr
PowerParts|Protection|Engine Protection 2-Stroke
Skid plate
Never without one! KTM plastic skid plates combine many special qualities:
  • Manufactured using state-of-the-art plastic injection moulding technology
  • Made from special high-strength plastic
  • Revised, extremely tough fastening system
  • Developed for use in the toughest offroad terrain
  • Maximum protection at minimum possible weight
  • Precisely fitting design - specially developed for KTM models
  • Simple installation making use of a special quick-release mechanism
  • Removed in five seconds flat
Never without one! KTM plastic skid plates combine many special qualities:<ul><li class="li-disc"> Manufactured using state-of-the-art plastic injection moulding technology</li><li class="li-disc"> Made from special high-strength plastic</li><li class="li-disc"> Revised, extremely tough fastening system</li><li class="li-disc"> Developed for use in the toughest offroad terrain</li><li class="li-disc"> Maximum protection at minimum possible weight </li><li class="li-disc"> Precisely fitting design - specially developed for KTM models </li><li class="li-disc"> Simple installation making use of a special quick-release mechanism</li><li class="li-disc"> Removed in five seconds flat</li></ul> dölj mer info

51503990200

Lagerstatus: hos lev.
Pris: 1035kr
PowerParts|Protection|Engine Protection 2-Stroke
Skid plate
This generation of KTM aluminum skid plates offers the most effective protection for frame and engine:
  • Exceptionally robust rear fastening clamp
  • Made of 4 mm strong, high-tensile, robust aluminum
  • Extremely durable and endurance-tested for the toughest off-road use
  • Custom design - specifically developed for KTM models
  • Highest grade quality workmanship
  • Simple and quick assembly
This generation of KTM aluminum skid plates offers the most effective protection for frame and engine:<ul><li class="li-square">Exceptionally robust rear fastening clamp</li><li class="li-square">Made of 4 mm strong, high-tensile, robust aluminum</li><li class="li-square">Extremely durable and endurance-tested for the toughest off-road use</li><li class="li-square">Custom design - specifically developed for KTM models</li><li class="li-square">Highest grade quality workmanship</li><li class="li-square">Simple and quick assembly</li></ul> dölj mer info

50303990200

Lagerstatus: 1
Pris: 1625kr
PowerParts|Protection|Engine Protection 2-Stroke
Skid plate
This generation of KTM aluminum engine guards offers the most effective protection for frame and engine:
  • Extremely robust rear fastening clamp
  • Made of 4 mm, high-tensile, robust aluminum
  • Side parts welded from the inside and outside
  • Extremely durable and endurance tested for the toughest off road use
  • Custom design - specifically developed for KTM models
  • Highest grade quality workmanship
  • Simple and quick assembly
This generation of KTM aluminum engine guards offers the most effective protection for frame and engine:<ul><li class="li-square">Extremely robust rear fastening clamp</li><li class="li-square">Made of 4 mm, high-tensile, robust aluminum</li><li class="li-square">Side parts welded from the inside and outside</li><li class="li-square">Extremely durable and endurance tested for the toughest off road use</li><li class="li-square">Custom design - specifically developed for KTM models</li><li class="li-square">Highest grade quality workmanship</li><li class="li-square">Simple and quick assembly</li></ul> dölj mer info

77707040100

Lagerstatus: hos lev.
Pris: 1965kr
PowerParts|Seats|Offroad
Factory seat
With its blue cover, this seat suits the current factory-style graphics kits.
Standard height.
<div class="gs01l">With its blue cover, this seat suits the current factory-style graphics kits.<br />Standard height.</div> dölj mer info

77207940900

Lagerstatus: 1
Pris: 1625kr
PowerParts|Seats|Offroad
Factory seat
This seat provides great freedom of movement, but still a perfect hold. The "wave surface" acts as a step even though it isn't one. Standard height.
This seat provides great freedom of movement, but still a perfect hold. The "wave surface" acts as a step even though it isn't one. Standard height. dölj mer info

77707940050

Lagerstatus: 1
Pris: 925kr
PowerParts|Seats|Offroad
Factory seat cover
What backs up the rear of Cairoli and Co on the bike? No-less than this waffle-shaped and extremely robust factory seat cover. Why not try it out yourself? For standard height seats.
What backs up the rear of Cairoli and Co on the bike? No-less than this waffle-shaped and extremely robust factory seat cover. Why not try it out yourself? For standard height seats. dölj mer info

78907940050

Lagerstatus: 1
Pris: 925kr
PowerParts|Seats|Offroad
Factory seat cover
This seat cover with transversely stitched ribs ensures maximum support with unrestricted freedom of movement thanks to its special design.
For standard height seats.
<div class="gs01l">This seat cover with transversely stitched ribs ensures maximum support with unrestricted freedom of movement thanks to its special design.<br />For standard height seats. </div> dölj mer info

78107940000

Lagerstatus: 1
Pris: 1625kr
PowerParts|Seats|Offroad
Seat
Specially designed for riders over 1.90 m tall. Approx. 35 mm higher than the standard seat.
Specially designed for riders over 1.90 m tall. Approx. 35 mm higher than the standard seat. dölj mer info

77207940700

Lagerstatus: 1
Pris: 1625kr
PowerParts|Seats|Offroad
Seat
Particularly elastic foam for extra comfort. Standard height.
Particularly elastic foam for extra comfort. Standard height. dölj mer info

77207940600

Lagerstatus: hos lev.
Pris: 1625kr
PowerParts|Seats|Offroad
Seat
Also provides shorter riders with optimum control of the motorcycle in difficult terrain. Approx. 15 mm lower than the standard seat.
Also provides shorter riders with optimum control of the motorcycle in difficult terrain. Approx. 15 mm lower than the standard seat. dölj mer info

77207940400

Lagerstatus: 1
Pris: 1625kr
PowerParts|Seats|Offroad
Seat
Specially designed for riders over 1.80 m tall. Approx. 20 mm higher than the standard seat.
Specially designed for riders over 1.80 m tall. Approx. 20 mm higher than the standard seat. dölj mer info

79407978000

Lagerstatus: 4
Pris: 122kr
PowerParts|Seats|Offroad
Seat pocket
Recommended for storing your timecard during races. Stick it directly to the seat with grip glue.
Recommended for storing your timecard during races. Stick it directly to the seat with grip glue. dölj mer info

77207940800

Lagerstatus: 2
Pris: 1625kr
PowerParts|Seats|Offroad
Step up seat
The factory rider seat: Thanks to the special step, there's no slipping backwards when you open up the throttle. Standard height.
The factory rider seat: Thanks to the special step, there's no slipping backwards when you open up the throttle. Standard height. dölj mer info

5840907010030

Lagerstatus: hos lev.
Pris: 2735kr
PowerParts|Spare parts
3.5X16.5" Rim black
dölj mer info

54610459000

Lagerstatus: 18
Pris: 53kr
PowerParts|Spare parts
Damping rubber
dölj mer info

78003940030

Lagerstatus: hos lev.
Pris: 315kr
PowerParts|Spare parts
Pivot Pegz overhaul-kit
dölj mer info

5831005024491

Lagerstatus: hos lev.
Pris: 1765kr
PowerParts|Spare parts
Rear sprocket carrier
dölj mer info

77207940050

Lagerstatus: 1
Pris: 455kr
PowerParts|Spare parts
Seat cover
dölj mer info

79101933000

Lagerstatus: hos lev.
Pris: 935kr
PowerParts|Spare parts
Steering stem
dölj mer info

78104970010

Lagerstatus: 2
Pris: 455kr
PowerParts|Spare parts
Tread chain guide
dölj mer info

78101900100

Lagerstatus: 6
Pris: 340kr
PowerParts|Suspension/Triple clamp
Bleeder valve set
Bleeder valves designed especially for WP forks. A quick press of the finger and the fork is bled.
Bleeder valves designed especially for WP forks. A quick press of the finger and the fork is bled. dölj mer info

SXS14450300

Lagerstatus: hos lev.
Pris: 5595kr
PowerParts|Suspension/Triple clamp
Factory linkage
The SXS shock absorber linkage is the result of very successful teamwork between KTM factory riders and the specialists in the Development department at KTM PowerParts and has the following properties:
  • CNC-machined from high-strength aluminum
  • Orange anodized

It's not only the visible difference in the SXS shock absorber linkage that stands out clearly; it also provides the following benefits:

  • Tauter tuning throughout the entire suspension travel
  • Unchanged suspension travel (measured at shock absorber)
  • Unchanged course of the progression curve
  • Even sportier and more competitive chassis than standard
The SXS shock absorber linkage is the result of very successful teamwork between KTM factory riders and the specialists in the Development department at KTM PowerParts and has the following properties:<ul><li class="li-disc">CNC-machined from high-strength aluminum</li><li class="li-disc">Orange anodized</li></ul><p>It's not only the visible difference in the SXS shock absorber linkage that stands out clearly; it also provides the following benefits:</p><ul><li class="li-disc">Tauter tuning throughout the entire suspension travel</li><li class="li-disc">Unchanged suspension travel (measured at shock absorber)</li><li class="li-disc">Unchanged course of the progression curve</li><li class="li-disc">Even sportier and more competitive chassis than standard</li></ul> dölj mer info

SXS13540100

Lagerstatus: hos lev.
Pris: 1155kr
PowerParts|Suspension/Triple clamp
Factory start device

This is how the factory riders start!
The factory start is mounted directly on the fork. Before the start, the fork is dipped and fixed in the desired position to shift the center of gravity forwards. This to a large extent prevents the front wheel from lifting at the start, thus providing greater traction and perhaps securing you the odd holeshot or two. The first time the fork dips, the fixing is slackened and the fork released automatically.
With additional fork protector reinforcement for more stable attachment to the fork stub.

<p>This is how the factory riders start!<br />The factory start is mounted directly on the fork. Before the start, the fork is dipped and fixed in the desired position to shift the center of gravity forwards. This to a large extent prevents the front wheel from lifting at the start, thus providing greater traction and perhaps securing you the odd holeshot or two. The first time the fork dips, the fixing is slackened and the fork released automatically.<br />With additional fork protector reinforcement for more stable attachment to the fork stub.</p> dölj mer info

SXS13450470

Lagerstatus: hos lev.
Pris: 5995kr
PowerParts|Suspension/Triple clamp
Factory triple clamp
CNC-machined. Includes steering stem tube and lower steering head bearing.
black
CNC-machined. Includes steering stem tube and lower steering head bearing. <br />black dölj mer info

7810199902204

Lagerstatus: hos lev.
Pris: 4295kr
PowerParts|Suspension/Triple clamp
Factory triple clamp
  • Manufactured from highest grade aluminum
  • Optimally tuned steering stem stiffness
  • 100% alignment of the fork tubes
  • Perfect flexibility - adapted precisely to the WP fork
  • Supplied with steering stem and with the steering head bearing already pressed on

Required items for installation on SX models from model year 2016:

  • Handlebar mount kit 789.01.939.044/144/244/344/444 or
  • PHDS SXS.07.125.200
<ul><li>Manufactured from highest grade aluminum</li><li>Optimally tuned steering stem stiffness</li><li>100% alignment of the fork tubes</li><li>Perfect flexibility - adapted precisely to the WP fork</li><li>Supplied with steering stem and with the steering head bearing already pressed on</li></ul><p>Required items for installation on SX models from model year 2016:</p><ul><li>Handlebar mount kit 789.01.939.044/144/244/344/444 or</li><li>PHDS SXS.07.125.200</li></ul> dölj mer info

7770199902230

Lagerstatus: hos lev.
Pris: 4195kr
PowerParts|Suspension/Triple clamp
Factory triple clamp
CNC-machined. Includes steering stem tube and lower steering head bearing.
black
CNC-machined. Includes steering stem tube and lower steering head bearing. <br />black dölj mer info

SXS13450460

Lagerstatus: hos lev.
Pris: 5795kr
PowerParts|Suspension/Triple clamp
Factory triple clamp
  • Made from high-grade aluminum
  • Optimally tuned steering stem stiffness
  • 100% alignment of the fork tubes
  • Ideal flexibility - precisely customized to the WP fork
  • Fork clamping tapered after anodizing, in order to largely prevent twisting of the fork tube in the triple clamp
  • Very easy offset adjustment of 20 or 22 mm
  • Shorter offset: Stability on fast straights
  • Longer offset: easy quick cornering in curves
  • Including steering stem with steering head bearing already pressed on

Required items for installation on SX models from model year 2016:

  • Handlebar mount kit 789.01.939.044/144/244/344/444 or PHDS SXS.07.125.200
<ul><li class="li-square">Made from high-grade aluminum</li><li class="li-square">Optimally tuned steering stem stiffness</li><li class="li-square">100% alignment of the fork tubes</li><li class="li-square">Ideal flexibility - precisely customized to the WP fork</li><li class="li-square">Fork clamping tapered after anodizing, in order to largely prevent twisting of the fork tube in the triple clamp</li><li class="li-square">Very easy offset adjustment of 20 or 22 mm</li><li class="li-square">Shorter offset: Stability on fast straights</li><li class="li-square">Longer offset: easy quick cornering in curves</li><li class="li-square">Including steering stem with steering head bearing already pressed on</li></ul><p>Required items for installation on SX models from model year 2016:<br /></p><ul><li class="li-square">Handlebar mount kit 789.01.939.044/144/244/344/444 or PHDS SXS.07.125.200</li></ul> dölj mer info

7810199902004

Lagerstatus: hos lev.
Pris: 4295kr
PowerParts|Suspension/Triple clamp
Factory triple clamp
  • Manufactured from highest grade aluminum
  • Optimally tuned steering stem stiffness
  • 100% alignment of the fork tubes
  • Perfect flexibility - adapted precisely to the WP fork
  • Supplied with steering stem and with the steering head bearing already pressed on

Required items for installation on SX models from model year 2016:

  • Handlebar mount kit 789.01.939.044/144/244/344/444 or
  • PHDS SXS.07.125.200
<ul><li class="li-square">Manufactured from highest grade aluminum</li><li class="li-square">Optimally tuned steering stem stiffness</li><li class="li-square">100% alignment of the fork tubes</li><li class="li-square">Perfect flexibility - adapted precisely to the WP fork</li><li class="li-square">Supplied with steering stem and with the steering head bearing already pressed on</li></ul><p>Required items for installation on SX models from model year 2016:</p><ul><li class="li-square">Handlebar mount kit 789.01.939.044/144/244/344/444 or</li><li class="li-square">PHDS SXS.07.125.200</li></ul> dölj mer info

77204905000

Lagerstatus: 2
Pris: 1735kr
PowerParts|Suspension/Triple clamp
Preload adjuster
Quick, precise chassis adjustment and improved appearance with the preload adjuster for the shock absorber.
The main benefits:
  • Quick preload adjustment
  • Use of the entire thread length on the shock absorber
  • Very simple to use
  • Low weight
  • dust-resistant
  • Mechanical drive mechanism
The shock absorber must be dismantled in order to fit the pre-load adjuster.
Quick, precise chassis adjustment and improved appearance with the preload adjuster for the shock absorber.<br />The main benefits:<ul><li class="li-disc"> Quick preload adjustment</li><li class="li-disc"> Use of the entire thread length on the shock absorber</li><li class="li-disc"> Very simple to use</li><li class="li-disc"> Low weight</li><li class="li-disc"> dust-resistant</li><li class="li-disc"> Mechanical drive mechanism</li></ul>The shock absorber must be dismantled in order to fit the pre-load adjuster. dölj mer info

SXS16450460

Lagerstatus: hos lev.
Pris: 13395kr
PowerParts|Suspension/Triple clamp
SFS triple clamp
The integrated SFS "Smooth feeling system" on the handlebar support for the triple clamp is an additional damping system that dampens shocks and vibrations. As a result of the SFS system you also get a very direct feel for the front wheel and a much more precise steering response. The hardness of the damper can be adjusted individually by means of a standard pump for Schrader valves. The triple clamp is made of high quality, CNC machined aluminum and anodized orange.
The integrated SFS "Smooth feeling system" on the handlebar support for the triple clamp is an additional damping system that dampens shocks and vibrations. As a result of the SFS system you also get a very direct feel for the front wheel and a much more precise steering response. The hardness of the damper can be adjusted individually by means of a standard pump for Schrader valves. The triple clamp is made of high quality, CNC machined aluminum and anodized orange. dölj mer info

14187K91

Lagerstatus: hos lev.
Pris: 20695kr
PowerParts|Suspension/Triple clamp
SXS suspension kit
Upgrade the internals of your fork to SXS factory performance. The suspension kit includes friction optimized parts which use special coatings and are manufactured with the tightest tolerances. This kit also includes the special adjusting mechanism for the rear shock which is also used by the factory riders. This will ensure a balanced chassis adjustment. This kit retains the original fork springs. Recommended setting list also included.
Upgrade the internals of your fork to SXS factory performance. The suspension kit includes friction optimized parts which use special coatings and are manufactured with the tightest tolerances. This kit also includes the special adjusting mechanism for the rear shock which is also used by the factory riders. This will ensure a balanced chassis adjustment. This kit retains the original fork springs. Recommended setting list also included. dölj mer info

77707908244

Lagerstatus: 1
Pris: 875kr
PowerParts|Tanks
Factory fuel cap
DO YOU KNOW that all KTM CNC parts are manufactured from highest quality aluminum and therefore not only look good, they also withstand the toughest treatment? With the anodized aluminum components in the original factory look from the PowerParts range, you can turn your KTM into something very special.
DO YOU KNOW that all KTM CNC parts are manufactured from highest quality aluminum and therefore not only look good, they also withstand the toughest treatment? With the anodized aluminum components in the original factory look from the PowerParts range, you can turn your KTM into something very special. dölj mer info

5510791314404

Lagerstatus: hos lev.
Pris: 5195kr
PowerParts|Tanks
Fuel tank
  • When mounting on SX models with Pro Lever linking, the right filter box cover 772.06.004.000/04/28/30 is also required
  • Comes without a filler cap and fuel pump
<ul><li class="li-square">When mounting on SX models with Pro Lever linking, the right filter box cover 772.06.004.000/04/28/30 is also required</li><li class="li-square">Comes without a filler cap and fuel pump</li></ul> dölj mer info

5510791354499

Lagerstatus: hos lev.
Pris: 5295kr
PowerParts|Tanks
Fuel tank
Planning an extended enduro tour or an endurance race? Can't be bothered with constantly searching for filling stations? Sometimes you simply need more fuel on board. Larger KTM tanks are available from 11 l to 21.5 l capacity. Best of all: Despite the larger size, the slim lines are retained and therefore the customary full freedom of movement.
When fitting to SX-F models as of MY 2013 and EXC models as of MY 2014, airbox part right (772.06.004.000/04/28/30 or 772.06.004.100/04/28/30) and airbox cover (772.06.003.000/04/28/30) are also required. Supplied with filler cap, but without fuel tap.
Planning an extended enduro tour or an endurance race? Can't be bothered with constantly searching for filling stations? Sometimes you simply need more fuel on board. Larger KTM tanks are available from 11 l to 21.5 l capacity. Best of all: Despite the larger size, the slim lines are retained and therefore the customary full freedom of movement.<br />When fitting to SX-F models as of MY 2013 and EXC models as of MY 2014, airbox part right (772.06.004.000/04/28/30 or 772.06.004.100/04/28/30) and airbox cover (772.06.003.000/04/28/30) are also required. Supplied with filler cap, but without fuel tap. dölj mer info

5510791344499

Lagerstatus: hos lev.
Pris: 4595kr
PowerParts|Tanks
Fuel tank

Supplied with fuel tank cap. IMS Dry break system mountable

<p>Supplied with fuel tank cap. IMS Dry break system mountable</p> dölj mer info

7723199700004

Lagerstatus: 4
Pris: 295kr
PowerParts|Tanks
Vent hose
Fuel-proof for tank and carburetor venting, approx. 3 m. Should only be used for venting purposes and not as a connection between tank and carburetor.
Fuel-proof for tank and carburetor venting, approx. 3 m. Should only be used for venting purposes and not as a connection between tank and carburetor. dölj mer info

78029155000

Lagerstatus: 1
Pris: 1035kr
PowerParts|Tools/Transportation|Stands
Bike stand
High quality plastic stand designed especially for KTM offroad bikes. Special features:
  • Two different heights possible
  • Can be used as a stand for the quickfill system
  • Storage space for the front and rear axle when removing the wheels
  • Attachments for the following parts: mud removal tool, exhaust plug, magnetic bolt pan and various tools
High quality plastic stand designed especially for KTM offroad bikes. Special features: <ul><li class="li-disc"> Two different heights possible</li><li class="li-disc"> Can be used as a stand for the quickfill system</li><li class="li-disc"> Storage space for the front and rear axle when removing the wheels</li><li class="li-disc"> Attachments for the following parts: mud removal tool, exhaust plug, magnetic bolt pan and various tools</li></ul> dölj mer info

79029094000

Lagerstatus: hos lev.
Pris: 230kr
PowerParts|Tools/Transportation|Stands
Multi plug-in stand
Plug-in stand and fork support, combined in one unit:
  • two tools in one, saves space during transport of your bike
  • stabilizes the motorcycle during transport
  • protects the fork shaft sealing rings and fork springs against damage, which may otherwise be caused by being tied down with too much force during transport

After transport it serves as the perfect plug-in stand!

Plug-in stand and fork support, combined in one unit:<br /><ul><li class="li-square">two tools in one, saves space during transport of your bike</li><li class="li-square">stabilizes the motorcycle during transport</li><li class="li-square">protects the fork shaft sealing rings and fork springs against damage, which may otherwise be caused by being tied down with too much force during transport</li></ul><p>After transport it serves as the perfect plug-in stand!</p> dölj mer info

77703020000

Lagerstatus: 1
Pris: 325kr
PowerParts|Tools/Transportation|Stands
Plug-in stand
dölj mer info

7720699800004

Lagerstatus: 1
Pris: 152kr
PowerParts|Tools/Transportation|Tools
Air filter cover
Particularly recommend! Protects against the air intake of water and dirt when cleaning the air filter box.
Particularly recommend! Protects against the air intake of water and dirt when cleaning the air filter box. dölj mer info

58429074200

Lagerstatus: 1
Pris: 760kr
PowerParts|Tools/Transportation|Tools
Battery charger
Battery charger with test function. Plus:
- Constant current charge
- Constant voltage charge
- Trickle charging
Comes with cable for fixed installation on the battery and with connector for connecting the battery to the battery charger quickly.
Caution: The battery charger must not be connected to lithium-ion batteries.
Battery charger with test function. Plus:<br />- Constant current charge <br />- Constant voltage charge <br />- Trickle charging <br />Comes with cable for fixed installation on the battery and with connector for connecting the battery to the battery charger quickly.<br />Caution: The battery charger must not be connected to lithium-ion batteries. dölj mer info

58429074000

Lagerstatus: hos lev.
Pris: 1995kr
PowerParts|Tools/Transportation|Tools
Battery charging and testing unit
A must for every workshop/garage. Testing, charging and keeping batteries fresh made easy. Fully automatic and economical battery charging by means of programmed charge characteristic.
Clear LC display shows charging level. Reverse polarity protection, short-circuit protection, overload protection.
Adapter for UK : 584.29.074.001, Adapter for AUS: 584.29.074.002
CAUTION: The battery charger must not be connected to lithium-ion batteries for longer than 24h, lithium-ion batteries are also not suitable for trickle charging.
A must for every workshop/garage. Testing, charging and keeping batteries fresh made easy. Fully automatic and economical battery charging by means of programmed charge characteristic.<br />Clear LC display shows charging level. Reverse polarity protection, short-circuit protection, overload protection.<br />Adapter for UK : 584.29.074.001, Adapter for AUS: 584.29.074.002<br />CAUTION: The battery charger must not be connected to lithium-ion batteries for longer than 24h, lithium-ion batteries are also not suitable for trickle charging. dölj mer info

00029901000

Lagerstatus: 2
Pris: 290kr
PowerParts|Tools/Transportation|Tools
Bead buddy
The Bead Buddy acts as your third hand when fitting tires. Holds the tire in the tire bed, thereby making tire fitting much easier. Simply hook it into the spokes and away you go. Particularly recommended for tire fitting with mousse.
The Bead Buddy acts as your third hand when fitting tires. Holds the tire in the tire bed, thereby making tire fitting much easier. Simply hook it into the spokes and away you go. Particularly recommended for tire fitting with mousse. dölj mer info

00029940000

Lagerstatus: hos lev.
Pris: 350kr
PowerParts|Tools/Transportation|Tools
Cable ring
  • Easy handling and operation
  • More safety
  • Less wear on the cord
  • Made of high quality material
  • Cable not included
<ul><li class="li-disc">Easy handling and operation</li><li class="li-disc">More safety</li><li class="li-disc">Less wear on the cord</li><li class="li-disc">Made of high quality material</li><li class="li-disc">Cable not included</li></ul> dölj mer info

U6951130

Lagerstatus: 9
Pris: 117kr
PowerParts|Tools/Transportation|Tools
Cable tie
100x, length:20 cm.
100x, length:20 cm. dölj mer info

00029016000

Lagerstatus: 6
Pris: 340kr
PowerParts|Tools/Transportation|Tools
Combination tool
Recommended tool for removing the screw caps. Fits all closed cartridge forks.
Recommended tool for removing the screw caps. Fits all closed cartridge forks. dölj mer info

59029041000

Lagerstatus: 2
Pris: 105kr
PowerParts|Tools/Transportation|Tools
Feeler gauge
0.10 mm; 0.12 mm; 0.15 mm; 0.20 mm; 0.25 mm
0.10 mm; 0.12 mm; 0.15 mm; 0.20 mm; 0.25 mm dölj mer info

60412002000

Lagerstatus: 1
Pris: 175kr
PowerParts|Tools/Transportation|Tools
First aid kit
  • Contents are in accordance with DIN standard 13167-2014 for motorcyclists
  • Waterproof packaging
  • With its slim shape and Velcro straps at the back, the first aid kit is easy to store

Note:

It is mandatory to carry a first aid kit in many countries (such as Austria, Italy, Portugal and Spain).

<ul><li class="li-square">Contents are in accordance with DIN standard 13167-2014 for motorcyclists</li><li class="li-square">Waterproof packaging</li><li class="li-square">With its slim shape and Velcro straps at the back, the first aid kit is easy to store</li></ul><p>Note:</p><p>It is mandatory to carry a first aid kit in many countries (such as Austria, Italy, Portugal and Spain).</p> dölj mer info

77312030000

Lagerstatus: hos lev.
Pris: 645kr
PowerParts|Tools/Transportation|Tools
Foot pump
Small and light, so very portable - saves the day in the event of a puncture on the move! Mini-footpump with pressure gauge on the swiveling valve head that fits all prevalent valves. Integrated double-cylinder with pressure switch-over to high pressure. Maximum 12 bar. Height: approx. 170 mm folded together.
Small and light, so very portable - saves the day in the event of a puncture on the move! Mini-footpump with pressure gauge on the swiveling valve head that fits all prevalent valves. Integrated double-cylinder with pressure switch-over to high pressure. Maximum 12 bar. Height: approx. 170 mm folded together. dölj mer info

78129994000

Lagerstatus: 3
Pris: 340kr
PowerParts|Tools/Transportation|Tools
Fork seal doctor
This clever tool is a must for every motorcycle toolbox. With it, you can remove dirt from your fork seals effortlessly. No matter whether it's in the garage or directly at the racetrack. this tool extends the life of your seals many times over. For all 48 mm forks.
This clever tool is a must for every motorcycle toolbox. With it, you can remove dirt from your fork seals effortlessly. No matter whether it's in the garage or directly at the racetrack. this tool extends the life of your seals many times over. For all 48 mm forks. dölj mer info

59029050000

Lagerstatus: 2
Pris: 117kr
PowerParts|Tools/Transportation|Tools
Funnel
Funnel specially developed for KTM motorcycles. Diameter (small and large) optimized to suit the filler neck; special groove for optimum ventilation.
Funnel specially developed for KTM motorcycles. Diameter (small and large) optimized to suit the filler neck; special groove for optimum ventilation. dölj mer info

77719910000

Lagerstatus: 6
Pris: 340kr
PowerParts|Tools/Transportation|Tools
Hook wrench
Practical tool for adjusting the preload of the shock absorber without needing to remove the shock absorber.
Practical tool for adjusting the preload of the shock absorber without needing to remove the shock absorber. dölj mer info

78029063000

Lagerstatus: hos lev.
Pris: 117kr
PowerParts|Tools/Transportation|Tools
Measuring cup
With scaling for both the fluid level and different mixture ratios. Perfect for changing the oil and for preparing larger quantities of 2-stroke mixture in the canister. Simple handling thanks to the ergonomic design.
With scaling for both the fluid level and different mixture ratios. Perfect for changing the oil and for preparing larger quantities of 2-stroke mixture in the canister. Simple handling thanks to the ergonomic design. dölj mer info

54829035000

Lagerstatus: hos lev.
Pris: 105kr
PowerParts|Tools/Transportation|Tools
Mud removal tool
Use this to remove the dirt from your last mud battle with ease! A motorcycle grip rubber (not included) can be fitted to the grip.
Use this to remove the dirt from your last mud battle with ease! A motorcycle grip rubber (not included) can be fitted to the grip. dölj mer info

00029997000

Lagerstatus: 1
Pris: 940kr
PowerParts|Tools/Transportation|Tools
Multi-purpose tool
The perfect alternative tool on the go. Conveniently packaged in a small bag you can use the tool for following fittings: 14, 12, 10, 8 mm hexagon sockets; 6, 8, 13 mm socket wrench; Inserts for slotted and Phillips screw heads, 5 mm / 6 mm Allen keys, 25/30 and 40/45 Torx; bottle opener; Option for attaching for 3/8 "and 1/4" socket wrench.
The perfect alternative tool on the go. Conveniently packaged in a small bag you can use the tool for following fittings: 14, 12, 10, 8 mm hexagon sockets; 6, 8, 13 mm socket wrench; Inserts for slotted and Phillips screw heads, 5 mm / 6 mm Allen keys, 25/30 and 40/45 Torx; bottle opener; Option for attaching for 3/8 "and 1/4" socket wrench. dölj mer info

7802906500004

Lagerstatus: 3
Pris: 117kr
PowerParts|Tools/Transportation|Tools
Oil bottle
Perfect for all 2-stroke riders on the move. The small bottle fits in your tool bag or jacket. Capacity 250 ml, with scaling for different mixture ratios (1 : 40 / 2.5 %; 1 : 50 / 2 %; 1 : 60 / 1.7 %; 1 : 80 / 1.25 %)
Perfect for all 2-stroke riders on the move. The small bottle fits in your tool bag or jacket. Capacity 250 ml, with scaling for different mixture ratios (1 : 40 / 2.5 %; 1 : 50 / 2 %; 1 : 60 / 1.7 %; 1 : 80 / 1.25 %) dölj mer info

7901203010004

Lagerstatus: 8
Pris: 82kr
PowerParts|Tools/Transportation|Tools
Plug
To prevent the ingress of water in the silencer when cleaning. For inner diameters 15 mm - 38 mm.
To prevent the ingress of water in the silencer when cleaning. For inner diameters 15 mm - 38 mm. dölj mer info

7901203000004

Lagerstatus: 1
Pris: 82kr
PowerParts|Tools/Transportation|Tools
Plug
Keeps water out of the silencer during cleaning. For internal diameters 37 mm - 62 mm.
Keeps water out of the silencer during cleaning. For internal diameters 37 mm - 62 mm. dölj mer info

59512030200

Lagerstatus: 6
Pris: 82kr
PowerParts|Tools/Transportation|Tools
Plug
Keeps water out of the silencer during cleaning. For internal diameters 37 mm – 62 mm.
Keeps water out of the silencer during cleaning. For internal diameters 37 mm – 62 mm. dölj mer info

54812016000

Lagerstatus: 1
Pris: 410kr
PowerParts|Tools/Transportation|Tools
Safety wire
200 m Wire with 0.61 mm diameter.
200 m Wire with 0.61 mm diameter. dölj mer info

00029090100

Lagerstatus: 2
Pris: 645kr
PowerParts|Tools/Transportation|Tools
Sag scale
Makes setting the sag significantly simpler. Folding version for easy stowing in the tool box.
Makes setting the sag significantly simpler. Folding version for easy stowing in the tool box. dölj mer info

00029990010

Lagerstatus: 2
Pris: 105kr
PowerParts|Tools/Transportation|Tools
Sag scale pin
Extra pin for using the sag scale with larger axle diameters.
Extra pin for using the sag scale with larger axle diameters. dölj mer info

U6909807

Lagerstatus: 4
Pris: 315kr
PowerParts|Tools/Transportation|Tools
Screw cap removal tool
Recommended tool for removing the screw caps. Fits all closed cartridge forks.
Recommended tool for removing the screw caps. Fits all closed cartridge forks. dölj mer info

7802996200030

Lagerstatus: 2
Pris: 175kr
PowerParts|Tools/Transportation|Tools
Screw pan
Magnetic. Never lose a bolt again!
Perfect for use in combination with the SX stand.
Magnetic. Never lose a bolt again!<br />Perfect for use in combination with the SX stand. dölj mer info

00029999200

Lagerstatus: hos lev.
Pris: 1155kr
PowerParts|Tools/Transportation|Tools
Screw selection
Contains all the most-used bolts and small parts for current SX and EXC models. 30 % saving compared with purchasing individual parts.
Contains all the most-used bolts and small parts for current SX and EXC models. 30 % saving compared with purchasing individual parts. dölj mer info

00029098200

Lagerstatus: 3
Pris: 255kr
PowerParts|Tools/Transportation|Tools
Screwdriver kit
High quality, 5-piece screwdriver set in the KTM design.
High quality, 5-piece screwdriver set in the KTM design. dölj mer info

7802906400004

Lagerstatus: 2
Pris: 58kr
PowerParts|Tools/Transportation|Tools
Spark plug box
With space for storing fuses.
With space for storing fuses. dölj mer info

77212991100

Lagerstatus: 6
Pris: 175kr
PowerParts|Tools/Transportation|Tools
Spoke wrench
6 mm and 7 mm
6 mm and 7 mm dölj mer info

5030501700004

Lagerstatus: 5
Pris: 152kr
PowerParts|Tools/Transportation|Tools
Spring hook
Tool for removing exhaust springs
Tool for removing exhaust springs dölj mer info

58312078000

Lagerstatus: 2
Pris: 175kr
PowerParts|Tools/Transportation|Tools
Tool bag

The optimum solution for always having the most important tools to hand when on the road.

<p>The optimum solution for always having the most important tools to hand when on the road.</p> dölj mer info

00029098300

Lagerstatus: hos lev.
Pris: 805kr
PowerParts|Tools/Transportation|Tools
Toolbox
38-piece, 1/4" toolbox in orange with high-quality, chrome-vanadium tools.
Volume:
  • Ratchet (with locking device), lever, two extensions and socket wrench
  • Hexagon sockets from 4 to 14
  • Allen keys from 3 to 8
  • Phillips, slotted and Torx bits
With this, small jobs on your KTM can be completed quickly and reliably. Whether you're removing fairings or changing the oil, you'll definitely find the right tool here.
38-piece, 1/4" toolbox in orange with high-quality, chrome-vanadium tools.<br />Volume:<ul><li class="li-disc"> Ratchet (with locking device), lever, two extensions and socket wrench</li><li class="li-disc"> Hexagon sockets from 4 to 14</li><li class="li-disc"> Allen keys from 3 to 8</li><li class="li-disc"> Phillips, slotted and Torx bits</li></ul>With this, small jobs on your KTM can be completed quickly and reliably. Whether you're removing fairings or changing the oil, you'll definitely find the right tool here. dölj mer info

00029098400

Lagerstatus: 2
Pris: 1855kr
PowerParts|Tools/Transportation|Tools
Toolbox
60-piece, 3/8" toolbox in orange with high-quality, chrome-vanadium tools.
Volume:
  • Ratchet (with locking device), lever, two extensions and socket wrench
  • Hexagon sockets from 6 to 24
  • Allen keys from 3 to 10
  • Phillips and slotted bits
  • Torx bits from 15 to 55
With this, small jobs on your KTM can be completed quickly and reliably. Whether you're removing fairings or changing the oil, you'll definitely find the right tool here.
60-piece, 3/8" toolbox in orange with high-quality, chrome-vanadium tools.<br />Volume:<ul><li class="li-disc"> Ratchet (with locking device), lever, two extensions and socket wrench</li><li class="li-disc"> Hexagon sockets from 6 to 24</li><li class="li-disc"> Allen keys from 3 to 10</li><li class="li-disc"> Phillips and slotted bits</li><li class="li-disc"> Torx bits from 15 to 55 </li></ul>With this, small jobs on your KTM can be completed quickly and reliably. Whether you're removing fairings or changing the oil, you'll definitely find the right tool here. dölj mer info

00029996000

Lagerstatus: 1
Pris: 2675kr
PowerParts|Tools/Transportation|Tools
Torque wrench
High-quality, adjustable torque wrench 5-25 NM, including the following accessories:
  • Push-on spoke wrenches in sizes 5.65 and 6.95 mm
  • Push-on ratchet ¼"
  • Ratchet attachments: 6, 8, 10 mm socket wrench, 15 Torx
High-quality, adjustable torque wrench 5-25 NM, including the following accessories:<ul><li class="li-square">Push-on spoke wrenches in sizes 5.65 and 6.95 mm</li><li class="li-square">Push-on ratchet ¼"</li><li class="li-square">Ratchet attachments: 6, 8, 10 mm socket wrench, 15 Torx</li></ul> dölj mer info

51012093000

Lagerstatus: 3
Pris: 175kr
PowerParts|Tools/Transportation|Tools
Tyre lever
There's racing experience here as well! Practical tire iron - long version for minimum effort.
There's racing experience here as well! Practical tire iron - long version for minimum effort. dölj mer info

51012092000

Lagerstatus: 8
Pris: 152kr
PowerParts|Tools/Transportation|Tools
Tyre lever
There's racing experience here as well! Practical tire iron - short version ideal for the portable tool bag.
There's racing experience here as well! Practical tire iron - short version ideal for the portable tool bag. dölj mer info

78129984000

Lagerstatus: hos lev.
Pris: 1155kr
PowerParts|Tools/Transportation|Tools
Tyre lever kit
Made of high strength, orange anodized aluminum; not suitable for tire mounting with mousse. With integrated ring wrench SW 32, 27, 17, 13 and 10 mm.
Made of high strength, orange anodized aluminum; not suitable for tire mounting with mousse. With integrated ring wrench SW 32, 27, 17, 13 and 10 mm. dölj mer info

54829068000

Lagerstatus: 2
Pris: 340kr
PowerParts|Tools/Transportation|Tools
Tyre pressure gauge
Easy to use! Measuring range 0 bar – 4 bar. Clamping head rotatable through 90° on a flexible stainless steel feed line. The valve shaft is therefore accessed easily and quickly. Very accurate measurements by way of a durable internal membrane. Internal pressure is reduced after use by a relief valve (push button).
Easy to use! Measuring range 0 bar – 4 bar. Clamping head rotatable through 90° on a flexible stainless steel feed line. The valve shaft is therefore accessed easily and quickly. Very accurate measurements by way of a durable internal membrane. Internal pressure is reduced after use by a relief valve (push button). dölj mer info

77329068000

Lagerstatus: 2
Pris: 455kr
PowerParts|Tools/Transportation|Tools
Tyre pressure gauge
Comfortable and easy to use. Fits all standard valves. Pressure display in bar or psi. Integrated pressure release valve for accurate pressure adjustment. Disengageable display and work area lighting. Energy-saving function with automatic cut-off. Maximum measuring pressure: 11 bar.
Comfortable and easy to use. Fits all standard valves. Pressure display in bar or psi. Integrated pressure release valve for accurate pressure adjustment. Disengageable display and work area lighting. Energy-saving function with automatic cut-off. Maximum measuring pressure: 11 bar. dölj mer info

58310025000

Lagerstatus: hos lev.
Pris: 410kr
PowerParts|Tools/Transportation|Tools
Wheel alignment gauge
The ideal tool for checking perfect wheel position when tensioning the chain.
The ideal tool for checking perfect wheel position when tensioning the chain. dölj mer info

00029015000

Lagerstatus: 1
Pris: 575kr
PowerParts|Tools/Transportation|Tools
Wire pliers
Recommended, very practical, high quality tool to help you twist safety wire 548.12.016.000 like a professional.
Recommended, very practical, high quality tool to help you twist safety wire 548.12.016.000 like a professional. dölj mer info

U6951277

Lagerstatus: hos lev.
Pris: 2325kr
PowerParts|Tools/Transportation|Transportation
Bike ramp
High quality, folding aluminum ramp with straps for secure attachment on loading. Weighing in at 5.5 kg, it withstands a load of 180 kg. The total length is approx.200 cm, folded approx.100 cm.
High quality, folding aluminum ramp with straps for secure attachment on loading. Weighing in at 5.5 kg, it withstands a load of 180 kg. The total length is approx.200 cm, folded approx.100 cm. dölj mer info

61012016000

Lagerstatus: 3
Pris: 117kr
PowerParts|Tools/Transportation|Transportation
Brake lock
Practical help when loading the bike or jacking it up with the rear wheel lifting device.
Practical help when loading the bike or jacking it up with the rear wheel lifting device. dölj mer info

54829094100

Lagerstatus: hos lev.
Pris: 199kr
PowerParts|Tools/Transportation|Transportation
Fork support
  • Stabilizes your motorcycle during transportation
  • Protects the fork shaft seal rings and fork springs from damage due to overly strong tightening down with lashing straps while transportation
  • Gets clamped in between the tyre and the bottom of the front wheel fender
<ul><li class="li-square">Stabilizes your motorcycle during transportation</li><li class="li-square">Protects the fork shaft seal rings and fork springs from damage due to overly strong tightening down with lashing straps while transportation</li><li class="li-square">Gets clamped in between the tyre and the bottom of the front wheel fender</li></ul> dölj mer info

SXS05125600

Lagerstatus: 6
Pris: 117kr
PowerParts|Tools/Transportation|Transportation
Grip protection set
Prevents dirty grips.
Prevents dirty grips. dölj mer info

79412950000

Lagerstatus: 1
Pris: 575kr
PowerParts|Tools/Transportation|Transportation
Lashing strap set
  • Enables secure attachment to the machine without scratching your handlebars or tank
  • Made from durable ballistic nylon
  • Load capacity of 280 kg
  • With handlebar loops
  • With rubberized hooks on both belt ends
<ul><li class="li-square">Enables secure attachment to the machine without scratching your handlebars or tank</li><li class="li-square">Made from durable ballistic nylon</li><li class="li-square">Load capacity of 280 kg</li><li class="li-square">With handlebar loops</li><li class="li-square">With rubberized hooks on both belt ends</li></ul> dölj mer info

77512950300

Lagerstatus: hos lev.
Pris: 199kr
PowerParts|Tools/Transportation|Transportation
Lashing strap set
  • Enables secure attachment to the machine without scratching your handlebars or tank
  • Made from durable ballistic nylon
  • Load capacity of 280 kg
  • With handlebar loops
  • With rubberized hooks on both belt ends
<ul><li class="li-square">Enables secure attachment to the machine without scratching your handlebars or tank</li><li class="li-square">Made from durable ballistic nylon</li><li class="li-square">Load capacity of 280 kg</li><li class="li-square">With handlebar loops</li><li class="li-square">With rubberized hooks on both belt ends</li></ul> dölj mer info

77512950200

Lagerstatus: 2
Pris: 455kr
PowerParts|Tools/Transportation|Transportation
Lashing strap set
  • Enables secure attachment to the machine without scratching your handlebars or tank
  • With rubberized hooks and handlebar loops on belt ends
  • 2 units
<ul><li>Enables secure attachment to the machine without scratching your handlebars or tank</li><li>With rubberized hooks and handlebar loops on belt ends</li><li>2 units</li></ul> dölj mer info

79029930000

Lagerstatus: 2
Pris: 525kr
PowerParts|Tools/Transportation|Transportation
Pit board
To display the most important information to the driver in the race or during training. Incl. white marker pen to write on black backside.
To display the most important information to the driver in the race or during training. Incl. white marker pen to write on black backside. dölj mer info

7811297300099

Lagerstatus: 1
Pris: 1055kr
PowerParts|Tools/Transportation|Transportation
Plastic drum
20 liter, KTM transparent plastic canister for use on the racetrack. Includes a flexible hose and screw cap. For legal reasons, not to be used in some countries for storage and transportation of gasoline.
20 liter, KTM transparent plastic canister for use on the racetrack. Includes a flexible hose and screw cap. For legal reasons, not to be used in some countries for storage and transportation of gasoline. dölj mer info

62512007000

Lagerstatus: hos lev.
Pris: 1155kr
PowerParts|Tools/Transportation|Transportation
Protective indoor cover
No hope for dust, scratches, etc. The indoor bike cover turns every KTM into a real eye-catcher in the garage. The fabric consists of a special material with a distinctive structure that is completely impermeable to dust and dirt. The inner side has a soft lining.
No hope for dust, scratches, etc. The indoor bike cover turns every KTM into a real eye-catcher in the garage. The fabric consists of a special material with a distinctive structure that is completely impermeable to dust and dirt. The inner side has a soft lining. dölj mer info

59012007000

Lagerstatus: hos lev.
Pris: 925kr
PowerParts|Tools/Transportation|Transportation
Protective outdoor cover
The KTM outdoor bike cover guarantees perfect protection all year round. The cover is made from an exclusive, pigmented fabric. Including practical carrier bag.
The KTM outdoor bike cover guarantees perfect protection all year round. The cover is made from an exclusive, pigmented fabric. Including practical carrier bag. dölj mer info

61312007000

Lagerstatus: 1
Pris: 1155kr
PowerParts|Tools/Transportation|Transportation
Protective outdoor cover
The KTM outdoor bike cover guarantees perfect protection all year round. The cover is made from an exclusive, pigmented fabric. Including practical carrier bag.
The KTM outdoor bike cover guarantees perfect protection all year round. The cover is made from an exclusive, pigmented fabric. Including practical carrier bag. dölj mer info

78012006000

Lagerstatus: 3
Pris: 805kr
PowerParts|Tools/Transportation|Transportation
Service pit mat
This mat is already obligatory at many races. The special material mix prevents spilt fuel from seeping into the ground. The mat helps in finding fallen tools, bolts and other small loose parts when servicing outdoors. The special KTM design brings the total factory look to your service zone. Size: 160 cm x 100 cm.
This mat is already obligatory at many races. The special material mix prevents spilt fuel from seeping into the ground. The mat helps in finding fallen tools, bolts and other small loose parts when servicing outdoors. The special KTM design brings the total factory look to your service zone. Size: 160 cm x 100 cm. dölj mer info

79012906100

Lagerstatus: 1
Pris: 1505kr
PowerParts|Tools/Transportation|Transportation
Service pit mat
These mats conform with the official FIM regulations already mandatory on many routes corresponds. The facts:
  • Made from polyester, with special rubberized back
  • Gas and oil resistant
  • In special KTM design
  • Size: 100 x 170 cm
These mats conform with the official FIM regulations already mandatory on many routes corresponds. The facts:<ul><li class="li-disc">Made from polyester, with special rubberized back</li><li class="li-disc"> Gas and oil resistant</li><li class="li-disc">In special KTM design</li><li class="li-disc">Size: 100 x 170 cm</li></ul> dölj mer info

54812004000

Lagerstatus: 3
Pris: 117kr
PowerParts|Tools/Transportation|Transportation
Transport cover
For rear sprockets up to 50T and 220 mm - 260 mm brake discs.
For rear sprockets up to 50T and 220 mm - 260 mm brake discs. dölj mer info

60012016000

Lagerstatus: hos lev.
Pris: 1505kr
PowerParts|Tools/Transportation|Transportation
U-lock
High-quality U-lock made from hardened steel with a double locking mechanism. Locking cylinder with optimum protection against any attempts at manipulation. 250,000 key versions. Two keys supplied as standard. Includes rotating PVC cover that protects the cylinder lock from dirt. High quality corrosion protection.
High-quality U-lock made from hardened steel with a double locking mechanism. Locking cylinder with optimum protection against any attempts at manipulation. 250,000 key versions. Two keys supplied as standard. Includes rotating PVC cover that protects the cylinder lock from dirt. High quality corrosion protection. dölj mer info

78908988000

Lagerstatus: hos lev.
Pris: 505kr
PowerParts|Trim parts/decals|Decals
Dungey start number kit
dölj mer info

77708990200

Lagerstatus: 1
Pris: 1735kr
PowerParts|Trim parts/decals|Decals
Factory graphics kit
Standard is just not your thing?
Customize your own jaw-dropping motorcycle and stand out from the competition.
Standard is just not your thing?<br />Customize your own jaw-dropping motorcycle and stand out from the competition. dölj mer info

77301994050

Lagerstatus: 2
Pris: 230kr
PowerParts|Trim parts/decals|Decals
Fork protector sticker set
For use on the closed fork protector.
For use on the closed fork protector. dölj mer info

77708990000

Lagerstatus: hos lev.
Pris: 1755kr
PowerParts|Trim parts/decals|Decals
Gravity graphics kit
dölj mer info

78908990000

Lagerstatus: hos lev.
Pris: 1735kr
PowerParts|Trim parts/decals|Decals
Gravity graphics kit
Standard is just not your thing?
Customize your own jaw-dropping motorcycle and stand out from the competition.
Standard is just not your thing?<br />Customize your own jaw-dropping motorcycle and stand out from the competition. dölj mer info

78908990100

Lagerstatus: hos lev.
Pris: 1735kr
PowerParts|Trim parts/decals|Decals
Gravity graphics kit
Standard is just not your thing?
Customize your own jaw-dropping motorcycle and stand out from the competition.
Standard is just not your thing?<br />Customize your own jaw-dropping motorcycle and stand out from the competition. dölj mer info

52000024

Lagerstatus: 2
Pris: 315kr
PowerParts|Trim parts/decals|Decals
Protective fork sticker set
Extra thick film; protects the outer tubes against stone impact.
For all 43 mm forks.
Extra thick film; protects the outer tubes against stone impact.<br />For all 43 mm forks. dölj mer info

78108999000

Lagerstatus: 7
Pris: 230kr
PowerParts|Trim parts/decals|Decals
Radiator protection grille sticker kit
dölj mer info

7770898800080

Lagerstatus: 1
Pris: 340kr
PowerParts|Trim parts/decals|Decals
Start number backgrounds
3 parts
3 parts dölj mer info

7770898800038

Lagerstatus: 9
Pris: 340kr
PowerParts|Trim parts/decals|Decals
Start number backgrounds
3 parts
3 parts dölj mer info

7870898800080

Lagerstatus: 2
Pris: 340kr
PowerParts|Trim parts/decals|Decals
Start number backgrounds
4 parts
4 parts dölj mer info

7870898800030

Lagerstatus: hos lev.
Pris: 340kr
PowerParts|Trim parts/decals|Decals
Start number backgrounds
4 parts
4 parts dölj mer info

7870898800067

Lagerstatus: 1
Pris: 340kr
PowerParts|Trim parts/decals|Decals
Start number backgrounds
4 parts
4 parts dölj mer info

7870898800038

Lagerstatus: 2
Pris: 340kr
PowerParts|Trim parts/decals|Decals
Start number backgrounds
4 parts
4 parts dölj mer info

7870898800028

Lagerstatus: hos lev.
Pris: 340kr
PowerParts|Trim parts/decals|Decals
Start number backgrounds
4 parts
4 parts dölj mer info

322109

Lagerstatus: hos lev.
Pris: 29kr
PowerParts|Trim parts/decals|Decals
Start numbers
13 cm Tall, 3 pieces each
13 cm Tall, 3 pieces each dölj mer info

322209

Lagerstatus: hos lev.
Pris: 29kr
PowerParts|Trim parts/decals|Decals
Start numbers
13 cm Tall, 3 pieces each
13 cm Tall, 3 pieces each dölj mer info

U6913122

Lagerstatus: hos lev.
Pris: 230kr
PowerParts|Trim parts/decals|Decals
Sticker
KTM sticker made from a special, reflective material. Shines as soon as it is illuminated by a headlight. 2.4 cm tall.
KTM sticker made from a special, reflective material. Shines as soon as it is illuminated by a headlight. 2.4 cm tall. dölj mer info

U6913121

Lagerstatus: hos lev.
Pris: 230kr
PowerParts|Trim parts/decals|Decals
Sticker
KTM sticker made from a special, reflective material. Shines as soon as it is illuminated by a headlight. 2.4 cm tall.
KTM sticker made from a special, reflective material. Shines as soon as it is illuminated by a headlight. 2.4 cm tall. dölj mer info

79608978000

Lagerstatus: 19
Pris: 290kr
PowerParts|Trim parts/decals|Decals
Sticker sheet
KTM stickers, made from robust material to stick on your bike, car, trailer, etc. Contains 5 sheets.
KTM stickers, made from robust material to stick on your bike, car, trailer, etc. Contains 5 sheets. dölj mer info

7770600104430

Lagerstatus: hos lev.
Pris: 610kr
PowerParts|Trim parts/decals|Trim parts
Air filter box
dölj mer info

7770600104428

Lagerstatus: 1
Pris: 610kr
PowerParts|Trim parts/decals|Trim parts
Air filter box
dölj mer info

7770600300004

Lagerstatus: 1
Pris: 255kr
PowerParts|Trim parts/decals|Trim parts
Air filter cover
dölj mer info

7770600310028

Lagerstatus: hos lev.
Pris: 255kr
PowerParts|Trim parts/decals|Trim parts
Air filter cover
dölj mer info

7770600300030

Lagerstatus: 2
Pris: 255kr
PowerParts|Trim parts/decals|Trim parts
Air filter cover
dölj mer info

7770600300028

Lagerstatus: hos lev.
Pris: 255kr
PowerParts|Trim parts/decals|Trim parts
Air filter cover
dölj mer info

7770600400030

Lagerstatus: 2
Pris: 255kr
PowerParts|Trim parts/decals|Trim parts
Air filter panel
dölj mer info

7770600400028

Lagerstatus: hos lev.
Pris: 255kr
PowerParts|Trim parts/decals|Trim parts
Air filter panel
dölj mer info

7770600400004

Lagerstatus: 1
Pris: 255kr
PowerParts|Trim parts/decals|Trim parts
Air filter panel
dölj mer info

7770600430028

Lagerstatus: hos lev.
Pris: 255kr
PowerParts|Trim parts/decals|Trim parts
Air filter panel
dölj mer info

7770801000004

Lagerstatus: 2
Pris: 330kr
PowerParts|Trim parts/decals|Trim parts
Fender
dölj mer info

7770801000028

Lagerstatus: hos lev.
Pris: 340kr
PowerParts|Trim parts/decals|Trim parts
Fender
dölj mer info

7800109420028

Lagerstatus: hos lev.
Pris: 340kr
PowerParts|Trim parts/decals|Trim parts
Fork protector kit
dölj mer info

7800109420004

Lagerstatus: 2
Pris: 340kr
PowerParts|Trim parts/decals|Trim parts
Fork protector kit
dölj mer info

7800109420030

Lagerstatus: 1
Pris: 340kr
PowerParts|Trim parts/decals|Trim parts
Fork protector kit
dölj mer info

7770805400004

Lagerstatus: 16
Pris: 645kr
PowerParts|Trim parts/decals|Trim parts
Spoiler set
dölj mer info

7770805410028

Lagerstatus: 1
Pris: 645kr
PowerParts|Trim parts/decals|Trim parts
Spoiler set
dölj mer info

7770805410004

Lagerstatus: hos lev.
Pris: 645kr
PowerParts|Trim parts/decals|Trim parts
Spoiler set
dölj mer info

7770805400030

Lagerstatus: 1
Pris: 645kr
PowerParts|Trim parts/decals|Trim parts
Spoiler set
dölj mer info

7770805400028

Lagerstatus: 1
Pris: 645kr
PowerParts|Trim parts/decals|Trim parts
Spoiler set
dölj mer info

7770800704430

Lagerstatus: 1
Pris: 315kr
PowerParts|Trim parts/decals|Trim parts
Start number plate kit
dölj mer info

7770800704428

Lagerstatus: 1
Pris: 315kr
PowerParts|Trim parts/decals|Trim parts
Start number plate kit
dölj mer info

7770800704404

Lagerstatus: 1
Pris: 315kr
PowerParts|Trim parts/decals|Trim parts
Start number plate kit
dölj mer info

7720801300030

Lagerstatus: 1
Pris: 525kr
PowerParts|Trim parts/decals|Trim parts
Tail section
dölj mer info

7720801300028

Lagerstatus: 1
Pris: 525kr
PowerParts|Trim parts/decals|Trim parts
Tail section
dölj mer info

7720801300004

Lagerstatus: hos lev.
Pris: 525kr
PowerParts|Trim parts/decals|Trim parts
Tail section
dölj mer info

7900990104404

Lagerstatus: hos lev.
Pris: 6295kr
PowerParts|Wheels|Offroad
Factory front wheel 1,6x21"
  • Anodized D.I.D DirtStar rim - an ideal compromise between rigidity and flexibility
  • Anodized from the full milled hub - specially developed and coordinated to the properties of the D.I.D DirtStar rim
  • Maximum weight saving compared to standard wheels
  • Maximum gain in handling and, at the same time, stability in challenging offroad application
  • 36 spoke design
  • Anodized spoke nipple made from aluminum
  • Wheel size 1.6 x 21"
  • For axle diameter 22 mm
<ul><li class="li-square">Anodized D.I.D DirtStar rim - an ideal compromise between rigidity and flexibility </li><li class="li-square">Anodized from the full milled hub - specially developed and coordinated to the properties of the D.I.D DirtStar rim</li><li class="li-square">Maximum weight saving compared to standard wheels</li><li class="li-square">Maximum gain in handling and, at the same time, stability in challenging offroad application</li><li class="li-square">36 spoke design</li><li class="li-square">Anodized spoke nipple made from aluminum</li><li class="li-square">Wheel size 1.6 x 21"</li><li class="li-square">For axle diameter 22 mm</li></ul> dölj mer info

7720900104430

Lagerstatus: hos lev.
Pris: 6480kr
PowerParts|Wheels|Offroad
Factory front wheel 1.6x21"
Front wheel developed especially for motorsport.
  • Lighter than the standard wheel
  • 32-spoke design with black anodized aluminum nipples
  • Orange or black anodized rim
  • Black anodized hub machined from a solid block
  • 1,6x21"
When ordered as a set, a spoke wrench is supplied with the correctly preset torque (4.3 Nm) and correct wrench size (6.5 mm and 6.2 mm).
Front wheel developed especially for motorsport.<ul><li class="li-disc">Lighter than the standard wheel</li><li class="li-disc">32-spoke design with black anodized aluminum nipples</li><li class="li-disc">Orange or black anodized rim</li><li class="li-disc">Black anodized hub machined from a solid block</li><li class="li-disc">1,6x21"</li></ul>When ordered as a set, a spoke wrench is supplied with the correctly preset torque (4.3 Nm) and correct wrench size (6.5 mm and 6.2 mm). dölj mer info

7720900104404

Lagerstatus: hos lev.
Pris: 6480kr
PowerParts|Wheels|Offroad
Factory front wheel 1.6x21"
Front wheel specially developed for motorsport.
  • 1,6x21"
  • Lighter than the standard wheel
  • 32 spoke design with black anodized aluminum nipples
  • Orange anodized rim
  • Black anodized hub, machined from solid
When ordered as a set, supplied with a spoke wrench with the correct preset torque (4.3 Nm) and correct jaw opening (6.5 and 6.2 mm).

When mounting on models with 22 mm axle diameter, serial spacers (777.09.012.000) must be used.

Front wheel specially developed for motorsport.<ul><li class="li-disc">1,6x21"</li><li class="li-disc">Lighter than the standard wheel</li><li class="li-disc">32 spoke design with black anodized aluminum nipples</li><li class="li-disc">Orange anodized rim</li><li class="li-disc">Black anodized hub, machined from solid</li></ul>When ordered as a set, supplied with a spoke wrench with the correct preset torque (4.3 Nm) and correct jaw opening (6.5 and 6.2 mm).<p>When mounting on models with 22 mm axle diameter, serial spacers (777.09.012.000) must be used.</p> dölj mer info

7770990104430

Lagerstatus: hos lev.
Pris: 6900kr
PowerParts|Wheels|Offroad
Factory front wheel 1.6x21"
  • Wheel size 1,6 x 21"
  • For axle dimater of 26 mm (22mm)
  • 36 spoke design with silver anodized aluminum nipples
  • Black anodized Excel rim
  • Orange anodized KITE hub, machined from solid
  • Directly from the KTM MX Works Team workshop

When mounting on models with 22 mm axle diameter, the serial spacers from your original wheel must be used.

<ul><li class="li-square">Wheel size 1,6 x 21"</li><li class="li-square">For axle dimater of 26 mm (22mm)</li><li class="li-square">36 spoke design with silver anodized aluminum nipples</li><li class="li-square">Black anodized Excel rim</li><li class="li-square">Orange anodized KITE hub, machined from solid</li><li class="li-square">Directly from the KTM MX Works Team workshop</li></ul><p>When mounting on models with 22 mm axle diameter, the serial spacers from your original wheel must be used.<br /></p> dölj mer info

7901090204404

Lagerstatus: hos lev.
Pris: 7895kr
PowerParts|Wheels|Offroad
Factory rear wheel 2,15x18"
  • Anodized D.I.D DirtStar rim - an ideal compromise between rigidity and flexibility
  • Anodized from the full milled hub - specially developed and coordinated to the properties of the D.I.D DirtStar rim
  • Maximum weight saving compared to standard wheels
  • Maximum gain in handling and, at the same time, stability in challenging offroad application
  • 36 spoke design
  • Anodized spoke nipple made from aluminum
  • Wheel size 2.15 x 18"
  • For axle diameter 20 mm
<ul><li class="li-square">Anodized D.I.D DirtStar rim - an ideal compromise between rigidity and flexibility </li><li class="li-square">Anodized from the full milled hub - specially developed and coordinated to the properties of the D.I.D DirtStar rim</li><li class="li-square">Maximum weight saving compared to standard wheels</li><li class="li-square">Maximum gain in handling and, at the same time, stability in challenging offroad application</li><li class="li-square">36 spoke design</li><li class="li-square">Anodized spoke nipple made from aluminum</li><li class="li-square">Wheel size 2.15 x 18"</li><li class="li-square">For axle diameter 20 mm</li></ul> dölj mer info

7901090104404

Lagerstatus: hos lev.
Pris: 7895kr
PowerParts|Wheels|Offroad
Factory rear wheel 2,15x19"
  • Anodized D.I.D DirtStar rim - an ideal compromise between rigidity and flexibility
  • Anodized from the full milled hub - specially developed and coordinated to the properties of the D.I.D DirtStar rim
  • Maximum weight saving compared to standard wheels
  • Maximum gain in handling and, at the same time, stability in challenging offroad application
  • 36 spoke design
  • Anodized spoke nipple made from aluminum
  • Wheel size 2.15 x 19"
  • For axle diameter 25 mm
<ul><li class="li-square">Anodized D.I.D DirtStar rim - an ideal compromise between rigidity and flexibility </li><li class="li-square">Anodized from the full milled hub - specially developed and coordinated to the properties of the D.I.D DirtStar rim</li><li class="li-square">Maximum weight saving compared to standard wheels</li><li class="li-square">Maximum gain in handling and, at the same time, stability in challenging offroad application</li><li class="li-square">36 spoke design</li><li class="li-square">Anodized spoke nipple made from aluminum</li><li class="li-square">Wheel size 2.15 x 19"</li><li class="li-square">For axle diameter 25 mm</li></ul> dölj mer info

7721000114430

Lagerstatus: hos lev.
Pris: 7355kr
PowerParts|Wheels|Offroad
Factory rear wheel 2.15x19"
Rear wheel developed exclusively for motorsport.
  • Lighter than the standard wheel
  • 32-spoke design with black anodized aluminum nipples
  • Orange or black anodized rim
  • Black anodized hub machined from a solid block
  • 2,15" x 19"
When ordered as a set, a spoke wrench is supplied with the correctly preset torque (4.3 Nm) and correct wrench size (6.5 mm and 6.2 mm). When fitting to SX models as of MY 2013, the standard spacer bushes (777.10.016.000) must be used due to the larger axle diameter.
Rear wheel developed exclusively for motorsport.<ul><li class="li-disc">Lighter than the standard wheel</li><li class="li-disc">32-spoke design with black anodized aluminum nipples</li><li class="li-disc">Orange or black anodized rim</li><li class="li-disc">Black anodized hub machined from a solid block</li><li class="li-disc">2,15" x 19"</li></ul>When ordered as a set, a spoke wrench is supplied with the correctly preset torque (4.3 Nm) and correct wrench size (6.5 mm and 6.2 mm). When fitting to SX models as of MY 2013, the standard spacer bushes (777.10.016.000) must be used due to the larger axle diameter. dölj mer info

7721000114404

Lagerstatus: hos lev.
Pris: 7355kr
PowerParts|Wheels|Offroad
Factory rear wheel 2.15x19"
Rear wheel specially developed for motorsport.
  • 2,15" x 19"
  • Lighter than the standard wheel
  • 32 spoke design with black anodized aluminum nipples
  • Orange anodized rim
  • Black anodized hub, machined from solid
When ordered as a set, supplied with a spoke wrench with the correct preset torque (4.3 Nm) and correct jaw opening (6.5 and 6.2 mm). When fitting on SX models from 2013, the series spacers (777.10.016.000) must be fitted, due to the larger axle diameter.
Rear wheel specially developed for motorsport.<ul><li class="li-disc">2,15" x 19"</li><li class="li-disc">Lighter than the standard wheel</li><li class="li-disc">32 spoke design with black anodized aluminum nipples</li><li class="li-disc">Orange anodized rim</li><li class="li-disc">Black anodized hub, machined from solid</li></ul>When ordered as a set, supplied with a spoke wrench with the correct preset torque (4.3 Nm) and correct jaw opening (6.5 and 6.2 mm). When fitting on SX models from 2013, the series spacers (777.10.016.000) must be fitted, due to the larger axle diameter. dölj mer info

7771090104430

Lagerstatus: hos lev.
Pris: 8050kr
PowerParts|Wheels|Offroad
Factory rear wheel 2.15x19"
  • Wheel size 2,15 x 19"
  • For axle dimater of 20 mm (25mm)
  • 36 spoke design with silver anodized aluminum nipples
  • Black anodized Excel rim
  • Orange anodized KITE hub, machined from solid
  • Directly from the KTM MX Works Team workshop

When mounting on SX models from 2013 onwards, the serial spacers from your original wheel must be used due to the larger axle diameter.

<ul><li class="li-square">Wheel size 2,15 x 19"</li><li class="li-square">For axle dimater of 20 mm (25mm)</li><li class="li-square">36 spoke design with silver anodized aluminum nipples</li><li class="li-square">Black anodized Excel rim</li><li class="li-square">Orange anodized KITE hub, machined from solid</li><li class="li-square">Directly from the KTM MX Works Team workshop</li></ul><p>When mounting on SX models from 2013 onwards, the serial spacers from your original wheel must be used due to the larger axle diameter.<br /></p> dölj mer info

SXS06540810

Lagerstatus: hos lev.
Pris: 250kr
PowerParts|Wheels|Offroad
Spoke nipple kit
36 units
36 units dölj mer info

7720909910030

Lagerstatus: hos lev.
Pris: 18795kr
PowerParts|Wheels|Offroad
Wheel set
Consists of 21" front wheel and 19" rear wheel, including spoke wrench with correctly preset torque (4.3 Nm) and correct wrench size (6.5 mm and 6.2 mm). When fitting to SX models as of MY 2013, the standard spacer bushes (777.10.016.000) must be used due to the larger axle diameter on the rear wheel.
Consists of 21" front wheel and 19" rear wheel, including spoke wrench with correctly preset torque (4.3 Nm) and correct wrench size (6.5 mm and 6.2 mm). When fitting to SX models as of MY 2013, the standard spacer bushes (777.10.016.000) must be used due to the larger axle diameter on the rear wheel. dölj mer info

7720909910004

Lagerstatus: hos lev.
Pris: 18895kr
PowerParts|Wheels|Offroad
Wheel set
Consists of 21" front and 19" rear wheel, including spoke wrench with the correct preset torque (4.3 Nm) and correct jaw opening (6.5 and 6.2 mm). When fitting on SX models from 2013, the series spacers (777.10.016.000) must be fitted, due to the larger axle diameter of 25 mm at the rear, and the series spacers (777.09.012.000) are used when fitting models with 22 mm axle diameter at the front.
Consists of 21" front and 19" rear wheel, including spoke wrench with the correct preset torque (4.3 Nm) and correct jaw opening (6.5 and 6.2 mm). When fitting on SX models from 2013, the series spacers (777.10.016.000) must be fitted, due to the larger axle diameter of 25 mm at the rear, and the series spacers (777.09.012.000) are used when fitting models with 22 mm axle diameter at the front. dölj mer info

54809081060

Lagerstatus: 4
Pris: 175kr
PowerParts|Wheels|Special parts
Front axle puller
Simplifies removal of the front wheel. For all front axles with a 26 mm diameter.
Simplifies removal of the front wheel. For all front axles with a 26 mm diameter. dölj mer info

U6951087

Lagerstatus: 4
Pris: 93kr
PowerParts|Wheels|Special parts
Hub sticker kit
4 pieces 37 mm x31 mm , 4 pieces 48 mm x40 mm.
4 pieces 37 mm x31 mm , 4 pieces 48 mm x40 mm. dölj mer info

7771097615004

Lagerstatus: 9
Pris: 117kr
PowerParts|Wheels|Special parts
Valve cap set
Orange anodized valve caps.
Orange anodized valve caps. dölj mer info

7771097605004

Lagerstatus: 4
Pris: 175kr
PowerParts|Wheels|Special parts
Valve cap set
Orange anodized valve caps with valve opening function.
Orange anodized valve caps with valve opening function. dölj mer info

76509099000

Lagerstatus: 2
Pris: 340kr
PowerParts|Wheels|Special parts
Wheel rim sticker kit
Black/white, pre-cut sticker, suitable for front and rear rim.
Black/white, pre-cut sticker, suitable for front and rear rim. dölj mer info

78109999000

Lagerstatus: 1
Pris: 340kr
PowerParts|Wheels|Special parts
Wheel rim sticker kit
  • For wheel size 18/21"; 19/21"
  • Pre-cut sticker
  • Suitable for front and rear rim
<ul><li class="li-square">For wheel size 18/21"; 19/21"</li><li class="li-square">Pre-cut sticker</li><li class="li-square">Suitable for front and rear rim</li></ul> dölj mer info

78009099000

Lagerstatus: 2
Pris: 340kr
PowerParts|Wheels|Special parts
Wheel rim sticker kit
  • For wheel size 18/21"; 19/21"
  • Pre-cut sticker
  • Suitable for front and rear rim
<ul><li class="li-square">For wheel size 18/21"; 19/21"</li><li class="li-square">Pre-cut sticker</li><li class="li-square">Suitable for front and rear rim</li></ul> dölj mer info

58409001744

Lagerstatus: hos lev.
Pris: 5730kr
PowerParts|Wheels|Supermoto
Front wheel 3.5x16.5"
Silver.
Silver. dölj mer info

2610900104430

Lagerstatus: hos lev.
Pris: 6215kr
PowerParts|Wheels|Supermoto
Front wheel 3.5x16.5"
  • 26mm axle diameter
<ul><li class="li-square">26mm axle diameter</li></ul> dölj mer info

58409001644

Lagerstatus: hos lev.
Pris: 5480kr
PowerParts|Wheels|Supermoto
Front wheel 3.5x17"
dölj mer info

5840900164430

Lagerstatus: hos lev.
Pris: 5730kr
PowerParts|Wheels|Supermoto
Front wheel 3.5x17"
  • 26mm axle diameter
<ul><li class="li-square">26mm axle diameter</li></ul> dölj mer info

8120920104430

Lagerstatus: hos lev.
Pris: 8800kr
PowerParts|Wheels|Supermoto
Front wheel 3.5x17"
  • 26mm axle diameter
  • Tubeless
<ul><li class="li-square">26mm axle diameter</li><li class="li-square">Tubeless</li></ul> dölj mer info

5840907000030

Lagerstatus: hos lev.
Pris: 2735kr
PowerParts|Wheels|Supermoto
Rim
dölj mer info

58409070000

Lagerstatus: hos lev.
Pris: 2485kr
PowerParts|Wheels|Supermoto
Rim
dölj mer info

57310070000

Lagerstatus: hos lev.
Pris: 3315kr
PowerParts|Wheels|Supermoto
Rim
  • silver
  • 5x17"
<ul><li class="li-disc">silver</li><li class="li-disc">5x17"</li></ul> dölj mer info

58409070100

Lagerstatus: hos lev.
Pris: 2485kr
PowerParts|Wheels|Supermoto
Rim 3.5x16.5"
  • Silver
  • 3,5x17"
<ul><li class="li-disc">Silver</li><li class="li-disc">3,5x17"</li></ul> dölj mer info

50302042300

Lagerstatus: hos lev.
Pris: 730kr
SpareParts Kits|Clutch / brake lever
Clutch / brake lever
Clutch and brake lever set.
Clutch and brake lever set. dölj mer info

50332011210

Lagerstatus: hos lev.
Pris: 2455kr
SpareParts Kits|Clutch kit
Clutch kit
The clutch kit contains everything you need to repair your clutch.
The clutch kit contains everything you need to repair your clutch. dölj mer info

50330097100

Lagerstatus: 1
Pris: 365kr
SpareParts Kits|Cylinder seal set
Cylinder seal set

The seal set contains all the seals you need to repair your cylinder.

<p>The seal set contains all the seals you need to repair your cylinder.</p> dölj mer info

00050002042

Lagerstatus: hos lev.
Pris: 1375kr